My ihone 2g suddenly could not recognized by windows xp???

i have iphone 2g. suddenly 1 week ago it could not recognized by windows xp.my other aaple device work properly on same wondows.what can i do for iphone 2g?

iTunes doesn't recognize device:
For PC:    http://support.apple.com/kb/HT1923

Similar Messages

  • My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1

    My iPhone 5 suddenly could not hop onto LTE anymore, after updating to IOS 6.1. I know there is LTE coverage at my house, since before I updated it, it could hop on to LTE just fine, in the same location. My Carrier is CSL Hong Kong. Does anyone have this problem? If so, does anyone have a answer to it?

    Hi AEEA-Family,
    I also did the update this morning and had the same problem also on Vodacom. The whole morning after the update I have No Signal, turning the phone on and of gives you signal for a couple of minutes then it drops again to no signal.
    I've just made the following changes on my Phone and all seems ok again.
    Here are the steps I took to resolve it on my phone.
    1. Go to "Settings" > "Carrier" > Turn off "Automatic", wait for list of Carriers and select "Vodacom-SA"
    2. Go to "Settings" > "General" > "Cellular" > Turn off "Enable LTE"
    3. Go to "Settings" > "General" > "Cellular" > "Cellular Data Networks". Then Change EVERY APN from lte.vodacom.za to internet
    After I made all those changes I did a hard restart of the phone and now all seems fine.
    I suspect the update this morning Enabled all Vodacom's LTE settings, yet Vodacom is not 100% LTE yet in our areas and this is causing the problem.
    Hope this helps other people.

  • TS3812 my iphony suddenly could not connect to a network making it impossible for me to call or receive messages

    my iphony suddenly could not connect to a network making it impossible for me to call or receive messages

    Hello ronanee,
    If you have a case on your iPhone, you might want to verify that the case isn't causing the issue.
    iPhone: Signal or other interference while in carrying case
    http://support.apple.com/kb/HT2342
    If not, the following article provides information and suggestions that can help stabilize your cellular connection.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Cheers,
    Allen

  • Video ipod not recognized by windows at all

    My new video ipod suddenly cannot be recognized by Windows. I'm not really sure what happened - one day I was able to plug it in and have iTunes automatically start and sync, and now whenever I plug it in I just get the message "do not disconnect." Also, the iPod is not recognized by Windows - doesn't even show up in "My Computer," though it does show up in "Device Manager" and in the "Safely Remove Hardware" dialogue.
    What could be wrong? I already uninstalled iTunes and Quicktime and reinstalled them, to no luck. I also installed the new iPod system software 1.3 but also no luck. Finally, I uninstalled all of my USB ports and forced Windows to reinstall them, but that didn't work either. The first time I put in the iPod after that I got a dialogue box that it had recongized the new hardware and was installing the iPod, but nothing ever came of it.
    However, both iTunes and my video iPod are fully functional, and I have taken VERY good card of the video iPod.
    Any idea what could be wrong???

    I tried it, setting it to E. It didn't work. Tried the same thing after setting it to disk mode and it didn't work. Just the same old BS about "Do not disconnect," but it isn't recongized anywhere on the system except for Device Manager and the Disk Management tool you mentioned. No acknowledgement from iTunes or in My Computer. Meanwhile both iTunes and my iPod work fine, but they can't communicate with each other.
    I AM GOING INSANE!!!!!!!!!!!!!!!!!!!!! I have tried every trick in the book that I could possibly think of. Not only did I uninstall and reinstall iTunes, QuickTime and the iPod helper, but after I uninstalled them I COMPLETELY nuked them, eliminating every file and clearing extraneous references out of the registry. Then I reinstalled from the CD going by the instructions by the letter. I thought for sure it would work now but for some ridiculous reason it doesn't.
    I am completely at my wits' end.................. What the heck can I do???
    PS: I also have Linux installed in a secondary extended partition, which is on my hard drive but not counted as C. Not sure if that makes any difference.

  • Plays & lights work but NOT recognized by Windows/iTunes & won't charge

    It's a shuffle 512mb from a few months back and worked perfectly until last week. It continued to play as usual, but is no longer recognized when i plug it into ANY computer (i've tried about a half dozen)! I've followed every suggestion and recommendation from both the Apple Support and the discussion groups relating to my problem though it seems no one has experienced my specific ordeal. I am quite limited as it is not recognized by Windows. I tried searching for it as a "media device" but nothing. All the fucntions and lights work while playing, but there is absolutely no response when connected to a PC. When this charge goes, i'll be without my tunes!
    Any help...
    Thanks
    Shuffle 512mb   Windows XP Pro  

    AppleNEve wrote:
    I double checked to make sure that the cable is not faulty and it's working perfectly.
    how did you test that ?
    anyhoo, you might want to give this a shot:
    +Hi, All,+
    +It works now, It suddenly stopped detecting due to unknown reasons, but try these steps.+
    +Restart the device without connecting to your pc and+
    +Connect to pc and restart again, I did this 2 times and it was recognized and its working fine.+
    +Best of luck.+
    here's the original thread: http://en.kioskea.net/forum/affich-17997-ipod-not-detected
    if still no joy, it could be that your Touch is a goner. if it is still under warranty, you should plan a trip to the nearest Apple store.
    JGG

  • Ipod not recognized by windows, itunes, and will not charge with pc.

    yesterday, when i went to sync some new music onto my 1gen nano, it did not work (duh). i plugged it in 3 times:
    -1st, it displayed the "do not connect screen" for one second, and itunes flashed the screen it shows when your ipod is connected, but then the ipod disconnected itself after that one second.
    -2nd, windows gave me a message saying the hardware could not be recognized.
    -3rd, nothing at all happened, as has been happening each time i try to plug it in since then.
    i've done the 5 R's .. and i've tried all the suggestions shown on posts that sound like mine, including these: Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.
    iTunes 7 doesn't recognize the iPod.
    my ipod will charge when plugged into a wall charger, and it plays normally. also, my brother's ipod (2nd gen nano) is recognized by windows/itunes.

    Hello
    I have been having nearly the same problem as Crashcup for the past month. Differences being I am operating with Windows Vista and my iPod is a 160GB Classic. I have gone through all the steps in the troubleshooting documents to no result. I attach my iPod and it is not recognized by Windows, iTunes or even in Device Manager. Not even as an "Unknown Device".
    I know there is nothing wrong with the USB ports as two different external hard drives and a video game controller work perfectly fine through them. Same goes with the iPod itself; it continues to play and function normally, and is recognized by a charging device completely separate from my laptop. Just when attached to the computer there is no sign of it.
    I am very frustrated that there is no further instruction with regard to what to do with an iPod Classic (as referred to by Crashcup: "...it says to take a photo with an iPhone, or a screenshot with an iPod touch or iPad. WHAT ABOUT THE IPOD CLASSIC????)
    Any help would be much appreciated.l=

  • Device not recognized by Windows or iTunes - Blinking green light

    When I try to connect my iPod shuffle to my computer (Windows XP), it's not recognized by Windows or iTunes. (i.e. device does not appear in Windows explorer or iTunes) While in the USB port, the Shuffle's green light blinks incessantly. My wife uses an iPod on this machine (under separate user name) and has no problems.
    I've tried updating software (iTunes, iPod), restarting my computer and resetting the iPod to no avail. My machine is not on a network. The USB port(s) work fine as I can use my memory stick (no USB cable) with no problems. I've tried connecting my Shuffle under my user name as well as my wife's. Same problem.
    Also, I had my Shuffle setup on an old computer (PC, Windows 2000) and it still works fine plugging into that. (I'm getting rid of it soon, hence why I'm discovering these new problems).
    Please advise. Since my Shuffle is over a year old, I am not eligible for online chat or phone support without paying for an Apple Support agreement.
    I know there's another thread with the same issue that was not resolved on the discussion board.
    Thanks to anyone who can help.

    Recently I used my ipod at work all night, just like normal. After work on the way home, like normal, I plugged it into my aux port on my car's head unit, and plugged it into power. 10 minutes later, in the middle of going over Ortgea Highway(hiway 74 between Orange and Riverside Counties), it just suddenly stopped working. When I plug it into any of my computers at home, nothing happens, it is not recognized or seen. When I plug it into power, it displays either a "sad ipod icon" or a battery with exclamation mark(!) icon. I have brand new power adapters both for the car and home, plus brand new usb cables, thinking that would help. It hasn't and now, since I opened those packages, I am out that $$ and ******. Since I received this unit as payment for electrical services rendered, I have no idea how old it is. Does anyone have any ideas? ([email protected])

  • Hard drive not recognized during windows server 2008 setup

    hard drive not recognized during windows server 2008 setup

    Hi,
    Whether the hard disk is recognized in BIOS?
    Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
    a suitable driver is installed.
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Replacement Shuffle Still Not Recognized In Windows Or iTunes

    Hello everyone,
    I was having the orange/green light issue and my 512MB shuffle was not recognized in Windows or iTunes 7.0.1. I contacted Apple and they replaced my shuffle - after I attempted all documented fixes and running the Shuffle Reset Utility.
    I plugged the replacement in and received the message "xxx iPod shuffle cannot be updated. The required disk cannot be found." I found an article on how to remove some temp and application files. I did that and also ran "checkdisk" on my laptop and that error went away. The problem is now the shuffle is not recognized in iTunes or Windows once again. The shuffle did come up for less than 10 seconds as the "F" drive and then disappeared and could not be relocated.
    Here is the real rub for me - I plugged the shuffle into my wife's laptop running iTunes 7.0.1 and it works just fine!! Since my laptop is my primary - this is still a major issue for me.
    Does anyone have a fix for this? This has to be a Windows disk or driver issue.
    Does anyone have a fix for this type of issue? It is obviously a Windows disk or driver issue.

    First of all, try another port on your computer. Some ports are not connected direct to the motherboard and do not recognize the iPod as well as those that are. Reset the iPod each time you connect it to another port.
    Then try with the iPod in forced disk mode.
    Putting iPod into disk mode.
    Still no joy, see these.
    iTunes 7 doesn't recognize the iPod.
    Your Windows PC doesn't recognize iPod</font color</a>.
    iPod appears in Windows Explorer but does not appear in iTunes.
    iPod does not appear in iTunes.
    Fast user switching in Windows XP is not supported.
    Strange iPod behavior.

  • Shuffle is not recognized by windows xp or itunes.

    I have a ipod mini that is working wonderfully but when I tried to connect my son's shuffle - nothing happened. I have reinstalled ipod software & itunes, charged and reset the shuffle - everything I could think of. I am unable to restore it because it is not recognized by windows or the updater. The only thing that I can think of is to get a USB extension and see if that works. If anyone else has an idea to help me --- it would be greatly appreciated!!!!
    D.

    Yea! I found the problem.....all I had to do was get the extension. The shuffle wasn't getting a good connection directly to the tower. The USB extension was the fix I needed and everything works the way it should.

  • My Image CLASS MF4350d printer is not recognized by windows 8-64 bit

    My Image CLASS MF4350d printer is not recognized by windows 8-64 bit any help how can i fix the problem. I just bought new HP computer from Future shop and it came with Windows in it. but this windows8 doesnt have drivers for my printer Image Class MF 4350d. Now I hve no clue how can i fix this isue. Because I checked on Canon website for drivers and downloaded and run the drivers, but no solution for my printer at all.

    Yes. I have the latest version intalled but this hasnt helped.
    I thought it could be to do with the Shuffle not having enough of a battery charge.
    So i plugged it into the wall charger and then tried this didnt work either.
    It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

  • Ipod Shuffle A1271 is not recognized in Windows 8 64-bit

    My Ipod Shuffle is not recognized in windows 8 (64 bit)
    I get an error saying the device is not recognized by the computer and was getting just a solid orange light on the ipod.
    I kept playing around to find a solution and in the process deleted the drive in hopes to install it again. Now I just get a flat green light and am unable to even restore the driver.

    Yes. I have the latest version intalled but this hasnt helped.
    I thought it could be to do with the Shuffle not having enough of a battery charge.
    So i plugged it into the wall charger and then tried this didnt work either.
    It wont even play music for some reason. The only information I get in the earpiece when I turn it on is what the battery level is at.

  • IPod Touch 4g is not recognized in Windows 8.1

    Hello, I have been racking their brains over a month without knowing what to do, I have an iPod Touch that I got from a friend, and I can not sync with iTunes, I tested on Windows 7 and when it was said that the connected device 'usb not recognized 'and Windows 8.1 shows nothing, it just is charging the battery, I believe it can be internal drivers that may have lost acid, could someone help me? already thanks.
    Translated by Google Translate.

    See
    iOS: Device not recognized in iTunes for Windows             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

    Out of warranty by a month!
    Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
    The touchscreen still works while the screen is black.
    System restarted after sleep mode I think.
    The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
    I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
    When on the external monitor the internal display is not even recognized by windows.
    When I boot in safe mode, the internal screen works fine with of course limited capability.
    I have reloaded display drivers from the support site.
    Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
    Anyone have any clues as to what my be going on? Hardware, driver etc???
    What information can I provide?
    Solved!
    Go to Solution.

    This is a pretty weird issue with conflicting observations.
    1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
    2) Display works on external monitor in regular mode. (So, not drivers issue)
    Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
    Could you re-open and check that all connections are good?
    Is the Wi-Fi card working well?
    I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • 5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

    Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

    From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes.  Those affected have been exhausted by this ongoing issue.  To update or not to update?  And I always say never update unless you have to, and turn off all that auto update mess!
    I have two core2duo lappies running 32b vista.  My workflow dictates 32b fyi.  One is acer aspire running itunes v 11.1 (.0.126),  5th gen nano was originally formatted and works just fine on this machine to this day.  My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12)  Windows mounts it just fine.  itunes is not having it.  no shirt no shoes no service.
    I have both a 4th and 5th gen nano.  The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad!  Weird huh?  I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
    I'm at a loss on the thinkpad.  Scanned for intruders.  Cut the Lenovo bloat.  Executed system and reg maintenance.  Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail.  NO NO NO.  Every single dang port, every time on the thinkpad.  Has me feeling like others might get the same treatment by the next itunes update.  :|
    So in summary for me:
    5th gen nano and thinkpad are a NoGo on 11.1^  last working version for me = 11.0.1
    5th gen nano is working on an acer aspire 11.1.0  but no way in the world am I updating
    4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

Maybe you are looking for

  • Batch job creation for sending email if the invoice is aged

    Positive confirmation: Send system notification to the requestor if: a) An invoice is received and GR is not yet posted in the ECC system. b) An 'aged' invoice and GR is not yet posted in the ECC system. This requirement is for USA only. i.e., we hav

  • Set Cursor.vi fails after it has been called for 30 different panel refs in LV 7.1.1

    Make sure both attached files (Run LabVIEW_Cursor_TestCase.vi, SimpleVI.vi) are in the same folder. Run LabVIEW_Cursor_TestCase.vi notice that the -3 error code is returned from "Set Cursor.vi" after it has been called with 30 different panel refs. I

  • The document "fine_name" couldn't be opened

    Has anyone had the pleasure of working on a pages file, printing it, saving it, closing it and when you go back to open it, it says "The document "fine_name" couldn't be opened" It is a .page file format, I have tried opening it up in text edit and c

  • Question on dispute management status profile

    Dear Friends, I have a quetion on SAP FSCM dispute management status profile. While setting up the status profile we would specify the status values. A number is assigned to each status and it will have corresponding system status. In the standard de

  • Mozilla pages load without style and pictures.

    Yes, I have tried the methods suggested but with no avail. This problem has happened before and solved by tinkering with Java, however, I do not remember or documented how to. Screenshots can be provided if needed.