My ihone only displays a white screen and I want to fix it myself.

my iphone will only display a white screen can I fix it and how can I?

At this point, you probably be better off saving up for and purchasing a new one. Apple will not help you since you opened the iPod up.  A third party repair company may be able to help but the cost will likely be near the cost of buying a new Nano.
B-rock

Similar Messages

  • My itouch will only display a white screen, is this fixable? help!

    My i touch was working absoluty normally, then one day it would only display a white screen. I can still see it on my computer however it is showing that the memory has been wiped. I tried to restore it to its original settings, but it still displays the same white screen. I have drained the battery fully, and tried holding the buttons down for 10 seconds. Nothing is working and im now confused. Can anyone advise me please? thank you.

    When restoring an iPod to factory defaults/new iPOd does not solve a proble it is most likely due to a hardware problem.  I would make an appointment a the Genius Bar of an Apple store.

  • I have this iPod Nano 6G. I try to erase and sync it. It told me that I have to restore it. My Nano displays a white screen and said that do not disconnect. I press ok in itunes and tells me error occurred 1439. What should i do? :(

    I have this iPod Nano 6G. I try to erase and sync it. It told me that I have to restore it. My Nano displays a white screen and said that do not disconnect. I press ok in itunes and tells me error occurred 1439. What should i do? :(

    Hello dreyc,
    The following article provides information and troubleshooting steps that can help resolve this error.
    iPod: Can't restore or update in iTunes with error 1415, 1417, 1418, 1428, 1429, 1430, 1436, or 1439
    http://support.apple.com/kb/TS1372
    Cheers,
    Allen

  • Late 2011 model display problems: white screen and shuts off on its own

    A few days ago my macbook pro (late 2011 model) starting going nuts. The screen would turn white or become pixelated all the sudden, even if all i'm running is Chrome. The laptop is not over heated. This is what would happen:
    Screen goes white or become pixilated
    Computer shuts off on its own after a moment
    Attempt to reboot, stuck on apple logo screen (pixilated)
    Shuts off on its own again
    The only way to reboot is through safe mode.
    I've tried resetting SMC and running an apple hardware check.

    It's most likely the macbook pro 2011 denied by apple GPU problem many many others suffer from too.
    you can read about it here if you have a few days.
    2011 MacBook Pro and Discrete Graphics Card:
    https://discussions.apple.com/thread/4766577
    728 Pages long allready, still no repsonse from apple.

  • My 4th generation iPod touch is completetly frozen... Doesn't respond to home   turn off command, it's not being recognized by iTunes. It only shows a white screen and doesn't respond to nothing

    can someone help me?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My IPOD touch got wet and now only shows a white screen.  How to fix?

    My IPOD touch got wet (it was not submerged in water, just rained on) and now only shows a white screen.  How can I fix this?  I already dried it in rice, and reinstalled it on ITUNES.

    unless you have apple care which even that probably doesnt cover water damage. youre gonna need to buy a new screen. probably set you back $60 something. look up ipod touch 4g lcd screen in google and look for sites like amazon or something. unless you wanna have apple charge you like 100 bucks for it or probably more

  • Only get white screen and won't shut off

    Only get a white screen and won't shut off until battery goes dead

    If not successful try the remaining itemes of:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • When i click on messages the application opens a white screen and don't open it.

    when i click on messages the application opens a white screen and don't open it.

    Hi aldamtgf,
    Thanks for visiting Apple Support Communities.
    If Messages is only displaying a white screen when you open it, first force close the application using this method:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If Messages still does not open normally, restart your iPhone next:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    All the best,
    Jeremy

  • QT Uncompressed files display with White Screen

    I'm stumped.
    I have a few QT files that are uncompressed 8 bit. On my new 8 Core Intel Mac, a G5, and a Mac Mini I can see this file just fine. We're running 10.4.9 and QT 7.1.6. The Mac Minis and G5 are bare bones and have no codecs listed in the Library/Quicktime folder except Apple Intermediate (default).
    On all of my Intel XServes however, with the exact same installed universal binary QT codecs as my 8 Core, these same QT uncompressed files only display a white screen. In get info the codec is listed as Uncompressed 8bit 4:2:2. Last time I checked Uncompressed didn't even require a codec.
    Any ideas why the XServes can't read these QTs? I've even updated the QT to 7.2 hoping there was an Intel bug, but that didn't fix this.
    Thanks!

    There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
    If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. You can also give this player a try:
    http://www.videolan.org/vlc/
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic before you post a question.
    Regards.

  • TS1424 when i open itunes store i will only see a white screen

    when i open itunes store i will only see a white screen and i can't see anything
    please someone help me

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Ipod nano: white screen and beeping twice

    I have an ipod nano 4th or 5th generation. When I try to turn it on, it displays a white screen and beeps twice. I have tried the basic things: toggling the lock switch, holding down select and menu buttons simultaneously, doing that and then holding down the play and select simultaneously. Even restored it. Updated all of my itunes software. Still broken. What next?

    Hi
    It seems to be ok now... I had to go out and it ran out of battery, when I switched it back on it  appears to be fine.
    If it happens again (hoping that it doesn't!) and i do the reset.. will that remove all the music that's on there?
    Sorry for the ignorance
    Thank you for the answer

  • My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs.  I reset with remote ...same result....Any ideas?

    My apple TV displays an apple screen, and blinking white LED, only LED responds to remote inputs.  I reset with remote ...same result....Any ideas?

    If they are the instructions I think you might have seen, they are for the Apple TV 2.
    Unfortunately I think your Apple TV may have failed.
    You might try removing ALL the cables for a while and trying again, but I think you may be out of luck.

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working.

    My Macbook Pro is frozen on the login page with a white screen and only my login picture. How do I fix this? I can't turn it off and I closed it and let it charge but it's still not working. It's only 3 months old and was working perfectly fine 30min before this happened.

    Hello Kierasully,
    I would start your troubleshooting with the article below for issues of not being able to log in to your Mac. Start with booting up in to Safe Boot as well as resetting PRAM on your Mac. If that does not work, then verify the hard drive with booting to the Recover HD and go to Disk Utility to verify it.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/ts2570
    Regards,
    -Norm G. 

  • My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you

    My MacBook pro won't recognize hard drive I put in it. It boots only to a white screen unless I boot to my recovery USB. If I do that then I can select my USB and my external time machine drive in the disk utility, so no problems there. But what do you think it is? It won't recognize any hard drive I put in the machine, so might it be the sata cable?

    Boot the Recvoery USB, use Disk Utility to select the internal drive makers namea and size on the left.
    Now select erase and select the midde option and click erase, it will take a bit to complete but it's best for the drive.
    Now select Partiton tab, click the big box and Options: GUID and then Format: OS X Extended journaled and click apply.
    Quit and you should be able to install OS X now with your Apple ID and password.
    see
    http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/

Maybe you are looking for

  • Depot  Excise Invoice with reference to Delivery from project

    please understood my requirement Normal Depo Sales is like VA01-VL01N-J1IJ----VF01 here whatever excise values captured in J1IJ those values come to the commercial Invoice. As per My requirement we are creating Project and while creating sales order

  • Help intermittent problem with logging in

    Help i have intermittent problem with logging in, sometimes it just comes up with the desktop without any icons or dock and i have to restart the server so i can log on properly, but it doesn't happen all the time, any ideas would be appreciated???

  • In search of Unity 5 ES89

    Does anyone know if ES89 is available, just not public? Trying to setup Digital Networking or Unity to Unity Connection Interchange and understand that for Unity 5 you need ES89. http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/compatibili

  • Nested Application Module - commit behavior

    Guys, I have ADF BC in the following hierarchial manner. AM1 -VO1 -VO2 -AM2 (nested AM) Assume that there are pending transactions on both AM1 and AM2. what is the behaviour for the follwing? Q1 . Issuing commit on AM1, will it commit AM2 also? Q2 .

  • ABAP Query - ALV Grid Calculation

    Can anybody tell me whether in ABAP Query when you execute the Query in SQ01 its shows the report in ALV Grid format. In ALV Grid format there are some standard calculation are available like TOtal Mean value Minmum Maximum Count The above calculatio