My iMac 10.9.1 3.06 Ghz Intel core 2 duo ejects DVD-Rs in iDVD without burning
My iMac 21.5" from late 2009, while in iDVD, I go to burn on a -R DL and after about 20 seconds it ejects the disk and says to Insert a Recordable DVD. I've been able to record to DL before (I don't know how many OS updates ago). Any suggestions? About This Mac tells me I can write to +R, -R and both DL. I have over 70 GB left of free space. Thanks
My iMac 21.5" from late 2009, while in iDVD, I go to burn on a -R DL and after about 20 seconds it ejects the disk and says to Insert a Recordable DVD. I've been able to record to DL before (I don't know how many OS updates ago). Any suggestions? About This Mac tells me I can write to +R, -R and both DL. I have over 70 GB left of free space. Thanks
Similar Messages
-
Aperture 3.5 repeatedly crashes when cropping or editing. 10.9.4 on a 24" iMac early 2009 Processor 3.06 GHz Intel Core 2 Duo. Crash report: Processor 3.06 GHz Intel Core 2 Duo. Able to edit 3 or 4 photos before crashing again. Repair run multiple times. Can't copy/paste crash report -
any ideas?Yes. Just updated to 10.9.5 and 3.5.1 and crashed again. Only half of available memory on computer is being used.
How do I copy the "problem report"?
thanks very much -
Dear Apple Support Community.
As mentioned by a number of users reporting the same problem, my 2009 iMac CPU3.06 GHz Intel Core 2 Duo, 8GB RAM, has become extremely slow and repeatedly "out of Memory" since it was migrated from Mountain Lion to Mavericks (OS 10.9 then OS 10.9.1).
I have already run CleanMyMac, deleted 5GB of useless stuffs, which did not translate into any improvement. Following the advices collected in other Apple Support Community threads, I have applied EtreCheck the outcome of which is provided below.
For information, I have also upgraded my 2011 MacBook CPU2.3 GHz Core i7, 8GB which became only a bit slower than before, sometimes freezing which it almost never did before. However, I am used to the fact that Mac get usually slower and more prompt fo freeze after upgrading to a more recent OS.
Both my 2009 iMac and my 2011 MacBook have F-Secure installed. So the problem with the 2009 IMac is unlikly to be due to the presence of F-Secure. Interestingly, the few abnormalities found by Etrecheck were exacly identical before I ran CleanMyMac. There are two more findings (mentioned below) since I ran CleanMyMac on the 2009 iMac, which again didn't improve the problem.
So please find below the details of the EtreCheck experience and some additional measurements made with iStat while running EtreCheck:
Hardware Information:
iMac (24-inch, Early 2009)
iMac - model: iMac9,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information:
ATI Radeon HD 4850 - VRAM: 512 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 2:40:57
Disk Information:
WDC WD1001FALS-40K1B0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209.7 MB
XooS5 HD (disk0s2) /: 999.35 GB (189.85 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5670S
USB Information:
Apple Inc. Built-in iSight
Canon CanoScan
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
WD My Passport 071D 800mbit - 800mbit max
EFI (disk1s1) <not mounted>: 209.7 MB
disk1s2 (disk1s2) <not mounted>: 2 TB
Boot OS X (disk1s3) <not mounted>: 134.2 MB
Thunderbolt Information:
Kernel Extensions:
com.f-secure.kext.fsauth (1.0.0d1)
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist [REMARK: this abnormality appeared only after running CleanMyMac. It does not appear on my 2011 MacBook]
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[invalid] com.bjango.istatlocaldaemon.plist [REMARK: this abnormality pre-existed to running CleanMyMac. It appears also on my 2011 MacBook]
[loaded] com.f-secure.fsavd.dbhelper.plist
[loaded] com.f-secure.fsavd.plist
[loaded] com.f-secure.fsmac.firewall.plist
[loaded] com.f-secure.fsmac.fsupdated_guts2.plist
[loaded] com.f-secure.fsmac.licensetool.plist
[loaded] com.macpaw.CleanMyMac2.Agent.plist
Launch Agents:
[loaded] com.babylon.activation.plist
[loaded] com.bjango.istatlocal.plist
[loaded] com.f-secure.relauncher.plist
[loaded] com.f-secure.trasher.plist
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
User Login Items:
iTunesHelper
Dropbox
F-Secure Anti-Virus for MAC
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.04 - SDK 10.6
AdobePDFViewer: Version: 11.0.04 - SDK 10.6
DivXBrowserPlugin: Version: 2.1
Flash Player: Version: 11.9.900.170 - SDK 10.6
OfficeLiveBrowserPlugin: Version: 12.2.8
Google Earth Web Plug-in: Version: 6.1
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
User Internet Plug-ins::
Picasa: Version: 1.0
Bad Fonts:
None
Old applications:
None
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
XooS5 HD: Disk size: 930.71 GB Disk used: 753.90 GB
Destinations:
XooS5 TM [Local] (Last used)
Total size: 2
Total number of backups: 32
Oldest backup: 2013-09-15 01:11:39 +0000
Last backup: 2013-12-07 12:48:45 +0000
Size of backup disk: Too small. Backup size 2 < (Disk used 753.90 GB X 3)
Time Machine details may not be accurate. All volumes being backed up may not be listed.
REMARK: The above finding is unlikely to be accurate. In fact, my Time Machine is supported by a 2TB WD My Passport Studio external HD connected with a Firewire 800. As mentionned, only 754GB of the 2000GB are used.
Top Processes by CPU:
5% backupd
5% Mail
5% WindowServer
3% Finder
3% Dropbox
Top Processes by Memory:
1.60 GB mds_stores REMARK: this item was marked in red in the outcome of EtreCheck, so I assume there is something wrong there
82 MB Finder
74 MB Mail
49 MB softwareupdated
49 MB Dropbox
Virtual Memory Statistics:
97 MB Free RAM
1.21 GB Active RAM
1.19 GB Inactive RAM
1.21 GB Wired RAM
1.83 GB Page-ins
36 MB Page-outs
Please find now some additional measurements collected with iStat while running EtreCheck:
Practically:
The iMac can work slowly with only one software e.g. either Mail or Safari or Firefox, but still the below "out of Memory" message occurs about every 3 minutes.
Aperture has becomre to slow to be useable
If trying to write a mail (with Mail) while Safari or Firefox is open, then the "out of Memory" message occurs about every 20 seconds so I need to check on "Resume" several times per minute.
Conclusions
From the above, unless anyone in the Apple Support Community proves to be able to identify a specific problem leading to a way to find a cure, I tend to conclude that Mavericks is not suitable for computers operating with a Core 2 Duo CPU even with a 8GB of RAM.
Unless I missed something, I did not see any warning from Apple Computer Inc. informing their customers they should refrain from upgrading Core 2 Duo Computers.
The only solution I see so far is to downgrade from Mavericks to Mountain Lion. And the Apple Support Community would confirm that it is the only solution, I would appreciate to get your guidance on how to proceed.
Intended action plan
Migrate the above 2009 iMac to a 2014 Mac Mini Server operating on Mavericks to ensure that no data may be lost while downgrading to Montain Lion.
Provided the above downgrading operation is successful, assign this 2009 iMac to partial retirement e.g. Mail, Skype, iTunes and DVD player.
In advance, I would like to thank the Apple Community for helping me either i) finding a cure to the problem, ii) or confirming that Mavericks cannot operate properly on Core 2 Duo computers, iii) and in such a case, guiding me on how to downgrade to Mountain Lion.
Yours sincerely
Core... what anti-virus would you recommend using?
Use what is already included with OS X. It already includes everything it needs to protect itself from viruses and malware. Keep it that way with software updates from Apple.
A much better question is "how should I protect my Mac":
Never install any product that claims to "speed up", "clean up", "optimize", or "accelerate" your Mac. Without exception, they will do the opposite.
Never install pirated or "cracked" software, software obtained from dubious websites, or other questionable sources. Illegally obtained software is almost certain to contain malware.
Don’t supply your password in response to a popup window requesting it, unless you know what it is and the reason your credentials are required.
Don’t open email attachments from email addresses that you do not recognize, or click links contained in an email:
Most of these are scams that direct you to fraudulent sites that attempt to convince you to disclose personal information.
Such "phishing" attempts are the 21st century equivalent of a social exploit that has existed since the dawn of civilization. Don’t fall for it.
Apple will never ask you to reveal personal information in an email. If you receive an unexpected email from Apple saying your account will be closed unless you take immediate action, just ignore it. If your iTunes or App Store account becomes disabled for valid reasons, you will know when you try to buy something or log in to this support site, and are unable to.
Don’t install browser extensions unless you understand their purpose. Go to the Safari menu > Preferences > Extensions. If you see any extensions that you do not recognize or understand, simply click the Uninstall button and they will be gone.
Don’t install Java unless you are certain that you need it:
Java, a non-Apple product, is a potential vector for malware. If you are required to use Java, be mindful of that possibility.
Disable Java in Safari > Preferences > Security.
Despite its name JavaScript is unrelated to Java. No malware can infect your Mac through JavaScript. It’s OK to leave it enabled.
Block browser popups: Safari menu > Preferences > Security > and check "Block popup windows":
Popup windows are useful and required for some websites, but popups have devolved to become a common means to deliver targeted advertising that you probably do not want.
Popups themselves cannot infect your Mac, but many contain resource-hungry code that will slow down Internet browsing.
If you ever see a popup indicating it detected registry errors, that your Mac is infected with some ick, or that you won some prize, it is 100% fraudulent. Ignore it.
Ignore hyperventilating popular media outlets that thrive by promoting fear and discord with entertainment products arrogantly presented as "news". Learn what real threats actually exist and how to arm yourself against them:
The most serious threat to your data security is phishing. To date, most of these attempts have been pathetic and are easily recognized, but that is likely to change in the future as criminals become more clever.
OS X viruses do not exist, but intentionally malicious or poorly written code, created by either nefarious or inept individuals, is nothing new.
Never install something without first knowing what it is, what it does, how it works, and how to get rid of it when you don’t want it any more.
If you elect to use "anti-virus" software, familiarize yourself with its limitations and potential to cause adverse effects, and apply the principle immediately preceding this one.
Most such utilities will only slow down and destabilize your Mac while they look for viruses that do not exist, conveying no benefit whatsoever - other than to make you "feel good" about security, when you should actually be exercising sound judgment, derived from accurate knowledge, based on verifiable facts.
Do install updates from Apple as they become available. No one knows more about Macs and how to protect them than the company that builds them.
Summary: Use common sense and caution when you use your Mac, just like you would in any social context. There is no product, utility, or magic talisman that can protect you from all the evils of mankind. -
here is my etrecheck. Any help is appreciated
Hardware Information:
iMac (21.5-inch, Late 2009)
iMac - model: iMac10,1
1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400 - VRAM: 256 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 17:29:18
Disk Information:
ST3500418ASQ disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 391.48 GB (245.88 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 107.76 GB (94.95 GB free)
OPTIARC DVD RW AD-5680H
USB Information:
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Seagate FA GoFlex Desk 2 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Time Machine Backups (disk1s2) /Volumes/Time Machine Backups: 2 TB (1.56 TB free)
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Canon MX870 series
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.carbonite.launchd.carbonitedaemon.plist 3rd-Party support link
[System] com.crashplan.engine.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
Launch Agents:
[System] com.carbonite.launchd.carbonitealerts.plist 3rd-Party support link
[System] com.carbonite.launchd.carbonitestatus.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.crashplan.javacheck.plist 3rd-Party support link
[not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist 3rd-Party support link
[not loaded] uk.co.markallan.clamxav.freshclam.plist 3rd-Party support link
User Login Items:
iTunesHelper
Adobe Bridge CS4
CrashPlan menu bar
ClamXavSentry
AdobeResourceSynchronizer
Canon IJ Network Scanner Selector2
Internet Plug-ins:
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 3rd-Party support link
Musicnotes: Version: 1.18.9 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.03 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Silverlight: Version: 4.0.51204.0 3rd-Party support link
Flash Player: Version: 12.0.0.38 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.03 - SDK 10.6 3rd-Party support link
EPPEX Plugin: Version: 3.0.5.0 3rd-Party support link
Scorch: Version: 6.1.0 3rd-Party support link
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
User Internet Plug-ins:
WebEx: Version: 1.0 3rd-Party support link
3rd Party Preference Panes:
Carbonite 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
/Library/Application Support/Carbonite
CarboniteDaemon: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
CarboniteStatus: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
CarboniteAlerts: Version: 1.1.14 build 604 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 364.60 GB Disk used: 135.61 GB
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 2
Total number of backups: 169
Oldest backup: 2011-04-10 20:10:19 +0000
Last backup: 2014-02-04 22:28:22 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 364.60 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
16% Solavant Demo
9% mds
3% CarboniteDaemon
2% WindowServer
2% EtreCheck
Top Processes by Memory:
348 MB firefox
217 MB clamd
135 MB mds_stores
106 MB Mail
102 MB softwareupdated
Virtual Memory Information:
794 MB Free RAM
1.70 GB Active RAM
443 MB Inactive RAM
587 MB Wired RAM
1.13 GB Page-ins
896 KB Page-outsFixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I have a 3.06 GHz Intel Core 2 Duo iMac. Can I use mirroring via Apple TV? If so. how.
I'm having no trouble sending stuff from my iPod Touch to my TV via Apple TV, but can't seem to get my
3.06 GHz Intel Core 2 Duo iMac to do so, as the mirror icon is not appearing in the Menu bar on top.
1. Can my processor mirror?
2. If so, how do I get the iCon to appear in the Menu barLooking at your processor, you haven't got a compatible Mac. AirPlay Mirroring requires a Mid 2011 or newer iMac > http://support.apple.com/kb/HT5404
To mirror the Mac's display to the Apple TV, use an application like AirParrot or Beamer > http://www.airparrot.com
If you want to use AirPlay to send music or videos to the Apple TV, open iTunes and you should see the AirPlay icon on the iTunes toolbar -
just started today. i open safari 5.0.6 and it crashes and closes. it has been working fine for years. what is up ? Model Name:
iMac Model Identifier:
iMac7,1 Processor Name:
Intel Core 2 Duo Processor Speed:
2 GHz Number Of Processors:
1 TotalOpen Console in Utilities & see if there are any clues or repeating messages when this happens.
-
Imac 2.4 Ghz intel Core 2 Duo. What is the best OS i can run?
I need to spend some cash on my OS X. I have a version 10.5.8 and a Imac 2.4 GHz Intel Core 2 Duo. 2GB of SDram
What is the best i can DO?As Niel says 10.8.5 however in order to get the best experience upgrade the RAM to a minimum of 4GB, your system can run 6GB which can be purchased from OWC (www.macsales.com).
-
I have an iMac purchased new about 5 years ago with OS 10.4.11. I would like to upgrade to Lion. I currently have a 2.33 GHz Intel Core 2 Duo processor with 2 GB of ram. Can I upgrade to Lion, and what is the best way to do so?
From what I read here:
http://www.tuaw.com/2011/06/06/lion-...u-2-gb-of-ram/
s long as they already have Snow Leopard 10.6.8 installed in it.All a person needs to do with that type of iMac is to upgrade/max out their Ram. They claim that an Interl iMac with Core 2 Duo is all that is needed, as long as it has OS 10.6.8 installed. They say you don`t need the "Core i3, Core i5, Core i7, or Xeon processor"
But I wonder about the RAM speed, the iMac 2.33Ghz uses DDR2 SDRAM, which I believe is rated at 667Mhz. Lion maybe installed but it might be problems running smoothly or not?
Did some quick checking and the iMacs apple is selling this year use 1333MHz DDR3 SDRAM.
The only thing to do is to make sure you have a good back-up, Install your RAM and install Snow Leo, then wait a couple of hours and install Lion.
Good Luck -
I have a mid 2007 iMac. 2 GHz Intel Core 2 Duo, 4 GB 667MHz DDR2 SDRAM, OSX 10.9.5. I attempted to do the latest update and got the message: Start up disk is full. Delete files. How do I do that?
Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Get an external hard drive on which to store some of your files after which you can
erase the data from your internal drive to free up space.
5. Also see Freeing space on your Mac OS X startup disk.
6. See Where did my Disk Space go?.
7. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
Late 2006, 24" iMac, 2.16 GHz Intel Core 2 Duo, Screen Tearing, nVidia 7300
Late 2006, 24" iMac, 2.16 GHz Intel Core 2 Duo, Screen Tearing, nVidia GeForce 7300 GT
I've been suffering with screen tearing, strange screen artifacts, etc. followed by totally unresponsive freezing machine. This problem has been happening to varying degrees for about 9 months.
Initially, I was able to mitigate the problem with smcFanControl. Adjusting the fan speeds up helped keep the machine cool and prevent most of the problems. Recently, we had a spell of hot weather and the fans just couldn't keep up. If you're using smcFanControl, the only fan speed that will really make a difference is the CPU. The HDD and ODD fans are no where near where you need to be.
Also, I noticed the machine was LOADED with dust when I took it apart, including the heat sink fins for the graphics card. If you have time you may want to try a thorough cleaning with compressed air before replacing the card. You just need to get through step 11 below to access what needs to be cleaned.
Based on reading here and elsewhere, I decided to replace the graphics card. To give back to the community, I wanted to layout the procedure here.
Where to buy the card.
I had a tough time finding the right card. I did exhaustive web searches using every combination of Nvidia 7300 GT, etc. You really need to search by the Apple part number. The Apple part number for the 7300 is 661-4179, for the 7600 is 661-4180. I found it at We Love Macs and at dv warehouse. I paid $248 for the 7600 card. BE CAREFUL buying a "refurbished" card. At We Love Macs, "refurbished" means "pulled from a working machine." Could be a machine with as much mileage as yours and prone to the same failures as yours.
The card is an MXM style card (generally used in laptops), with a giant heat sink and heat pipe assembly. The card can be separated from the heat assembly. If I had time, I would have tried a generic, cheaper, MXM style card.
Dispelling some myths.
People here and elsewhere have said that no Intel iMac graphics card can be replaced, that they're wedded to the logic board. The one on this model can be replaced, I've done it. Also, some have said you can't put a 256MB, 7600 GT in a machine that originally had a 128MB, 7300 GT. Also, not true. That's what I did to my machine and it is working fine.
So here's the step-by-step on my take apart and replacement. This is just one user helping out others, PROCEED AT YOUR OWN RISK. This takes about 1 1/2 hours to take apart and 2 to put back together.
1) Install the iStat widget and monitor the temperatures for a few days and record the temperatures (to be able to verify that you've completed the repair correctly later)
2) Make a complete backup of any internal drives and make sure the backup will be bootable (use Carbon Copy Cloner)
3) Use static safeguards, like an anti-static wrist strap.
4) Get a pen a stack of paper envelopes to separate and label the pieces you remove.
5) You'll need a #2 Phillips and #6, 8, 10 Torx. Most of the screws at T-8. There are 8 T-8s holding in the LCD. They are about 1 1/4" down. You'll need a long, skinny T-8 to get to them.
6) Unplug the machine and place it on it's back on a large white sheet of paper.
7) Remove RAM door, #2 Phillips x 2.
8) Remove RAM.
9) Remove 4 T-8s along bottom.
10) Remove large rectangular plastic bezel surrounding the whole machine, tilt up being careful not to stress iSight cables. You'll need to stretch it around the RAM ejection tabs.
11) Detach two iSight cables.
12) Peel up black stickers at lower corners of speakers.
13) Remove LCD screws, T-8 x 8. You'll probably drop a few, they're pretty easy to retrieve.
14) Remove two retaining screws on right hand LCD cable. T-6 x2 Unplug cable.
15) Remove LCD inverter cable, left.
Start unplugging everything connected to the logic board.
16) Unplug cable coming from right speaker. Note cable routing, it is the only one that's a little tricky. Also, note that the left one plugs in on the right and the right one plugs in on the left.
17) Remove right speaker. T-10 Note: left and right speaker screws are different lengths.
18) Unplug ODD blower cable.
19) Unplug ODD temp cable and lift up tape.
20) Unplug HDD blower cable.
21) Unplug the HDD temp cable.
22) Unplug the camera & mic cable.
23) Unscrew the clamp securing the airport card (has two antenna cables going to it, labeled PCIE), T-6 x 2
24) Unplug SATA cable.
25) Unplug Power cable, thick black plastic harness, socket.
26) Unplug ambient temp cable.
27) Unscrew the bluetooth card, T-6 x2.
28) Unplug CPU blower cable.
29) Unplug power button cable, 2 conductor, tiny cable, bottom left.
30) Unscrew left speaker, T-10, unplug from logic board, but just leave dangling, no need to remove cable completely.
31) Remove logic board screws. Be careful to segregate them, they have different lengths and different thread pitches and thread types. Some are machine threads going into metal, some are coarse threads going into plastic.
31a) Heat sink frame to case T-8 x 2
31b) Logic board to case T-8 x 3
31c) Screws at heat sink from arrows T-8 x 3
31d) Logic board at bottom near RAM slot T-8 x 2
32) Unplug ODD ribbon cable, be extremely careful. Release plastic tabs on each side to remove. Be sure it is fully and evenly seated when you put it back later.
33) Remove logic board with attached graphics card.
34) Unplug graphics card heat sink sensor cable at logic board end.
35) Remove graphics card screws 2 x T-6
36) Remove single screw from small L-bracket on heat sink 1 x T-6
Replace graphics card.
Reverse steps, put everything back together. Be careful not to pinch any cables when you put the logic board back in. When you put the LCD back in, if you can't get the screws to stick to the driver, use some glue stick from your kid's art supplies.
Test everything. You've disconnected every cable in the system.
I torture tested the machine with a space heater on it, 5 different videos of different formats playing at the same time. No problems.
I took a lot of pictures inside the machine. As soon as I figure out a good place to post them, I'll try to add a link here.
Good luckGreetings!
I know this is in response to your post from over 2 years ago, but I was searching on Apple's site for the max RAM I can upgrade our refurbed iMac too and it brought up this post.
Oddly enough, I've been experiencing the same screen issues and locking up on our iMac as well. I was concerned it was a bad memory module, but now I'm thinking it's the same issue you found.
Because I bought this some 2+ years ago refurbed from Apple, I'm not surprised that could be the actual problem.
I've pulled this thing apart once to replace the hard-drive which crashed about a year ago, so I'm not totally new at opening it up, but this process you mention sounds pretty intense...just wanted to get your second take on it based on what I've done thus far.
Thanks again for posting this...it was an eye-opener as to what might actually be causing our issues with our trusted Mac!
Joshua -
IMac 3.06 GHz Intel Core 2 Duo with 12gb of RAM running very very slow.
My late 2010 iMac 3.06 GHz Intel Core 2 Duo with 12gb of ram is running very slow. It takes a very long for the computer to boot with the desktop taking ages to fully load. Applications are also taking an unholy amount of time to load with the spinning wheel always appearing through out use, and they often crash or don't respond and close during use. I'm talking applications like Word taking 3 minutes to load and getting the spinning wheel when font size is tried to be changed and crashing and closing if a large volume of text is attempted to be pasted into a document.The computer is also failing to shut down properly just staying on a blue screen. I recently wiped and completed a fresh install however the issues came back.
As you can imagine after spending so much on the computer I'm not best pleased about these issue, I've spoken to the apple staff in my local store by they weren't very helpful and seemed to no little about computers and the so called "Genius" who I spoke to about my issue was a joke, repeating himself and talking utter rubbish, while I understand you need to look at a computer to get a real picture of an issue, some advice could of been provided. I haven't got time to take the computer to the store at the moment and get a technician to look a it, so I was wondering if anyone else had experienced these issues and knew what caused the fault, and that way if possible I can repair the issue myself.
Thanks in advance for any help on the issue it’s much appreciated. At the moment I'm pretty close to ditching the thing and buying an Alienware!See:
Mac Maintenance Quick Assist,
Mac OS X speed FAQ,
Speeding up Macs,
Macintosh OS X Routine Maintenance,
Essential Mac Maintenance: Get set up,
Essential Mac Maintenance: Rev up your routines,
Maintaining OS X,
Five Mac maintenance myths, and
Myths of required versus not required maintenance for Mac OS X for information. -
24" iMac 2.8 GHz Intel Core 2 Duo OSX v10.5.5 shutdown anomaly
24” iMac 2.8 GHz Intel Core 2 Duo OSX v10.5.5 shutdown anomaly.
I have noticed that when my iMac shuts down, that initially the One Touch Maxtor 500G external drive attached to the Firewire 400 port also does a normal shut down and the light goes out. Within a few minutes I noticed that the light on the Maxtor is back on. This does not happen if I use the USB 2.0 port to attach the hard drive and iMac, the light remains off. It appears the FW400 port is active on the iMac even when in the shutdown mode. Is this normal for the iMac?
I have a 13”MacBook 2.4Ghz that does not activate the same Maxtor when it is shut down. I attach it via the MacBook FW400 port.
I hooked up an ammeter to the iMac power cord and observed the following readings:
iMac Off: From 50ma to 180ma cycling at a rate of 23 cycles/minute. Using the Watt reading of the instrument, that amounted to cycling from 0 to 5 Watts every 4 seconds.
iMac On: 1.16A 133Watts.
This iMac is new, 1 week old, does it need repair or is this normal? I like to get a FW800 external HD, but I don’t want to have to pull the plug on the HD every time I want to shut down.Since my Maxtor doesn’t have an on/off switch, the best solution I have found so far is to use my APC 750 UPS to turn off the Maxtor. This APC has a master plug outlet that senses when the computer is turned on and activates 3 other outlets to on when the computer reaches a certain power threshold. Fortunately the threshold is user adjustable and I was able to set it high enough to turn off the Maxtor outlet when the iMac is off.
Is anyone else able to confirm that their iMac cycles like mine does, or is this peculiar to my iMac? It is new and if it needs service I would prefer to do it while it is covered under warranty. -
My 2007 iMac is 2.4 GHz Intel Core 2 Duo. I must upgrade from OS10.5.8 to at least 10.7. I know I must go to 10.6.8 on the way. Two questions: 1. As a bright but ignorant person, what problems will I encounter in upgrading? 2. Should I go to 10.7 or all the way to Mavericks?
Thanks for your reply--makes me not want to get involved with Mavericks, and I appreciate the heads-up. What I hadn't thought about is that by upgrading my OS I would also have to upgrade from my Adobe CS1. Since I'm retired from my art career, I'm reluctant to spend the dough on new CS; but I still like using PhotoShop and InDesign (and obviously don't care that they are outmoded). But I'll bet any newer Mac OS won't run my old software.
-
I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo. It came with iMovie ver. 9.0.5 installed. I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips. Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
Thanks in advance for any suggestions.I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo. It came with iMovie ver. 9.0.5 installed. I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips. Does anyone have any suggestions for a reasonably price camcorder that would work with my setup?
Thanks in advance for any suggestions. -
I have an 20 inch Imac 2,4 GHz Intel Core 2 Duo and I want to introduce Final Cut Pro X into the machine. Can I change the present Videocard ATI Radeon HD 2600 Pro 256 MB, into a more suitable videocard? Or is that not possible? I have upgraded the memory to 4 GB 667 MHz DDR2 SDRAM.
The GPU in a iMac is NOT upgradeable.
You should check to see if your model of iMac meets the minimum specs to run FCPX.
I believe that your GPU is NOT OpenCL capable, and hence not supported.
Even if it works, you would probably get marginal performance.
What you can do is download the trial version and see how (and if) it works.
Maybe you are looking for
-
Help!! In preview, wherever I click the mouse it shows my other sheets??
I'm new here and I'm trying to figure out how I can resolve this problem. Im making a website, as a starter i made a couple of sheets where I assigned events like when the mouse click "home" it should go to home page.. when the mouse go over "Topic"(
-
Hi, I'm fairly new to photoshop and I was just wondering if anyone knew how to get a player to look like they do in these pictures - the glossy, dark look. Thanks https://twitter.com/type1graphics/status/375774097592291328/photo/1 https://twitter.com
-
ToolShopAnim01.swf is loaded goes to frame with this code: _parent.attachMovie("buttonblanklevel", "butt_levelone", 3, {_x: 217, _y: 5}); _parent.butt_levelone._alpha = 50; _parent.butt_levelone.onRelease = function() { _parent.gotoAndStop
-
Not receiving icloud verification email, have checked spam etc..phone is just saying account not verified, the address was linked to my husbands account but has been removed, prior to this it was saying it was already in use. If i change to an old ad
-
WHenever I update all apps, apple has me reset SOMETHING on my account. Why does this always happen?
Every time I update my apps, apple forces me to reset a password, or re-enter my credit security number, or just SOMETHING. Is there any way to set a password, give my credit card and just have it stay that for more than one week?