My iMac 27 suddenly stopped reading SD card.

Hi suddenly my iMac is not reading SD card anymore. An external reader (very cheap) is doing a good job. Where's the problem?
Thanks

Try restarting your iMac then try the card.
About the SD and SDXC card slot
Article is designated for v10.7 Lion but may apply to v10..8 as well > OS X Lion: Use an SD card

Similar Messages

IMAC suddenly stops working Mouse,keyboard, wifi all stops responding. PLEASE HELP

iMAC suddenly stops working,display is on but key board and mouse does not respond.I changed keyboard with usb also but still same.even wifi stops working also.PLEASE HELP before there was some kernel panic errors , i updated every thing, installed an original osx mountain Lion. taken to Apple service center. They found nothing wrong with hard ware. But i am having still the same problems. It just stops responding to keyboard, mouse even wifi goes off some time. I thought it may be keyboard mouse problem so i changed them to normal usb keyboard and mouse but still the same. PLEASE PLEAE HELP. -------- LAST ERROR REPORT IS BELOW Interval Since Last Panic Report: 687085 sec Panics Since Last Report: 2 Anonymous UUID: 48C67BCC-4ADB-0131-8FCC-DBD9C01FBB0C Fri Jul 19 17:23:01 2013 panic(cpu 0 caller 0xffffff80096b8655): Kernel trap at 0xffffff7f8a53f351, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x0000000000000060, CR3: 0x000000000bf36000, CR4: 0x0000000000000660 RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x0000000000000018, RDX: 0x0000000000000004 RSP: 0xffffff8089c4ba60, RBP: 0xffffff8089c4ba80, RSI: 0x0000000000000060, RDI: 0x00000000ffffff8f R8: 0x00000000000000ff, R9: 0x0000000000000019, R10: 0xffffff8074831004, R11: 0x0000000000000008 R12: 0x0000000000000000, R13: 0xffffff807482e0ec, R14: 0x00000000ffffffff, R15: 0x0000000000000000 RFL: 0x0000000000010297, RIP: 0xffffff7f8a53f351, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000060, Error code: 0x0000000000000000, Fault CPU: 0x0 Backtrace (CPU 0), Frame : Return Address 0xffffff8089c4b700 : 0xffffff800961d626 0xffffff8089c4b770 : 0xffffff80096b8655 0xffffff8089c4b940 : 0xffffff80096ce17d 0xffffff8089c4b960 : 0xffffff7f8a53f351 0xffffff8089c4ba80 : 0xffffff7f8a525ff5 0xffffff8089c4bac0 : 0xffffff7f8a53a352 0xffffff8089c4bb50 : 0xffffff7f8a50da56 0xffffff8089c4bbb0 : 0xffffff7f8a4e5c36 0xffffff8089c4bbf0 : 0xffffff7f8a4e71b4 0xffffff8089c4bc20 : 0xffffff7f8a547d3c 0xffffff8089c4bc50 : 0xffffff7f8a4fad5b 0xffffff8089c4be00 : 0xffffff7f8a4f8a9e 0xffffff8089c4be40 : 0xffffff7f8a4fee0e 0xffffff8089c4be80 : 0xffffff7f8a5454df 0xffffff8089c4beb0 : 0xffffff7f8a58c82e 0xffffff8089c4bf00 : 0xffffff8009a4b1ab 0xffffff8089c4bf60 : 0xffffff800963e25e 0xffffff8089c4bfb0 : 0xffffff80096b3137 Kernel Extensions in backtrace: com.apple.driver.AirPort.Atheros40(600.72.2)[EBF8D6E8-59C6-3C1C-9549-32DDA193B1 D2]@0xffffff7f8a4ad000->0xffffff7f8a5f5fff dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f89c83000 dependency: com.apple.iokit.IO80211Family(530.4)[E86BEE31-8EE0-34BE-A53F-2571D85CC628]@0xff ffff7f8a43e000 dependency: com.apple.iokit.IONetworkingFamily(3.0)[F02560D1-ADE6-3AD9-8D05-43CB2B7C8B87]@0 xffffff7f89ddc000 BSD process name corresponding to current thread: kernel_task Mac OS version: 12E55 Kernel version: Darwin Kernel Version 12.4.0: Wed May 1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64 Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36 Kernel slide: 0x0000000009400000 Kernel text base: 0xffffff8009600000 System model name: iMac10,1 (Mac-F2268DC8) System uptime in nanoseconds: 397672779228 last loaded kext at 256566570174: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 65536) last unloaded kext at 363393284081: com.apple.filesystems.msdosfs 1.8.1 (addr 0xffffff7f8b624000, size 57344) loaded kexts: com.apple.filesystems.smbfs 1.8.4 com.apple.driver.AudioAUUC 1.60 com.apple.driver.AppleHDA 2.3.7fc4 com.apple.driver.AppleMikeyHIDDriver 122 com.apple.driver.AGPM 100.12.87 com.apple.driver.AppleHWSensor 1.9.5d0 com.apple.driver.AppleUpstreamUserClient 3.5.10 com.apple.kext.AMDFramebuffer 8.1.2 com.apple.driver.AppleMikeyDriver 2.3.7fc4 com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0 com.apple.driver.AppleLPC 1.6.0 com.apple.driver.AppleBacklight 170.2.5 com.apple.driver.AppleMCCSControl 1.1.11 com.apple.ATIRadeonX2000 8.1.2 com.apple.iokit.IOUserEthernet 1.0.0d1 com.apple.iokit.IOBluetoothSerialManager 4.1.4f2 com.apple.Dont_Steal_Mac_OS_X 7.0.0 com.apple.driver.ApplePolicyControl 3.4.5 com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.filesystems.autofs 3.0 com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1 com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1 com.apple.BootCache 34 com.apple.driver.AppleIRController 320.15 com.apple.iokit.SCSITaskUserClient 3.5.5 com.apple.driver.AppleUSBCardReader 3.1.7 com.apple.driver.XsanFilter 404 com.apple.iokit.IOAHCIBlockStorage 2.3.1 com.apple.driver.AppleUSBHub 5.5.5 com.apple.driver.AppleFWOHCI 4.9.6 com.apple.driver.AirPort.Atheros40 600.72.2 com.apple.driver.AppleRTC 1.5 com.apple.driver.AppleAHCIPort 2.5.2 com.apple.nvenet 2.0.19 com.apple.driver.AppleUSBEHCI 5.5.0 com.apple.driver.AppleUSBOHCI 5.2.5 com.apple.driver.AppleEFINVRAM 1.7 com.apple.driver.AppleHPET 1.8 com.apple.driver.AppleACPIButtons 1.7 com.apple.driver.AppleSMBIOS 1.9 com.apple.driver.AppleACPIEC 1.7 com.apple.driver.AppleAPIC 1.6 com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0 com.apple.nke.applicationfirewall 4.0.39 com.apple.security.quarantine 2.1 com.apple.driver.AppleIntelCPUPowerManagement 196.0.0 com.apple.driver.DspFuncLib 2.3.7fc4 com.apple.iokit.IOAudioFamily 1.8.9fc11 com.apple.kext.OSvKernDSPLib 1.6 com.apple.driver.IOPlatformPluginLegacy 1.0.0 com.apple.driver.AppleSMBusPCI 1.0.11d0 com.apple.driver.IOPlatformPluginFamily 5.3.0d51 com.apple.driver.AppleBacklightExpert 1.0.4 com.apple.driver.AppleSMBusController 1.0.11d0 com.apple.kext.AMD4600Controller 8.1.2 com.apple.kext.AMDSupport 8.1.2 com.apple.iokit.IOSurface 86.0.4 com.apple.iokit.IOSerialFamily 10.0.6 com.apple.iokit.IOBluetoothFamily 4.1.4f2 com.apple.driver.AppleGraphicsControl 3.4.5 com.apple.iokit.IONDRVSupport 2.3.7 com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.4f2 com.apple.kext.triggers 1.0 com.apple.iokit.IOFireWireIP 2.2.5 com.apple.driver.AppleSMC 3.1.4d2 com.apple.driver.AppleHDAController 2.3.7fc4 com.apple.iokit.IOGraphicsFamily 2.3.7 com.apple.iokit.IOHDAFamily 2.3.7fc4 com.apple.iokit.IOUSBHIDDriver 5.2.5 com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5 com.apple.iokit.IOBDStorageFamily 1.7 com.apple.iokit.IODVDStorageFamily 1.7.1 com.apple.iokit.IOCDStorageFamily 1.7.1 com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5 com.apple.iokit.IOUSBMassStorageClass 3.5.1 com.apple.driver.AppleUSBMergeNub 5.5.5 com.apple.driver.AppleUSBComposite 5.2.5 com.apple.iokit.IOAHCISerialATAPI 2.5.1 com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5 com.apple.iokit.IOUSBUserClient 5.5.5 com.apple.iokit.IOFireWireFamily 4.5.5 com.apple.iokit.IO80211Family 530.4 com.apple.iokit.IOAHCIFamily 2.3.1 com.apple.iokit.IONetworkingFamily 3.0 com.apple.iokit.IOUSBFamily 5.6.0 com.apple.driver.NVSMU 2.2.9 com.apple.driver.AppleEFIRuntime 1.7 com.apple.iokit.IOHIDFamily 1.8.1 com.apple.iokit.IOSMBusFamily 1.1 com.apple.security.sandbox 220.3 com.apple.kext.AppleMatch 1.0.0d1 com.apple.security.TMSafetyNet 7 com.apple.driver.DiskImages 345 com.apple.iokit.IOStorageFamily 1.8 com.apple.driver.AppleKeyStore 28.21 com.apple.driver.AppleACPIPlatform 1.7 com.apple.iokit.IOPCIFamily 2.7.3 com.apple.iokit.IOACPIFamily 1.4 com.apple.kec.corecrypto 1.0 Model: iMac10,1, BootROM IM101.00CC.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 4 GB, SMC 1.53f13 Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631 AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.72.0-P2P Bluetooth: Version 4.1.4f2 12041, 2 service, 18 devices, 1 incoming serial ports Network Service: Ethernet, Ethernet, en0 Network Service: AirPort, AirPort, en1 Serial ATA Device: Hitachi HDE721010SLA330, 1 TB Serial ATA Device: HL-DT-ST DVDRW GA11N USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0x24400000 / 2 USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26500000 / 2 USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x04500000 / 4 USB Device: USB Keyboard, 0x04f2 (Chicony Electronics Co., Ltd.), 0x0111, 0x04300000 / 3 USB Device: Microsoft Notebook Optical Mouse with Tilt Wheel, 0x045e (Microsoft Corporation), 0x00d2, 0x04100000 / 2 USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2 USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x06110000 / 3

That panic was not caused by third-party software. If the problem is recurrent, the possibilities are:
A stale or corrupt kernel cache
A damaged OS X installation
A fault in a peripheral device, if any
Corrupt non-volatile memory (NVRAM)
An internal hardware fault (including incompatible memory)
An obscure bug in OS X
You may already have ruled out some of these.
Rule out #1 by booting in safe mode and then rebooting as usual. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
You can rule out #2 and #3 by reinstalling the OS and testing with non-essential peripherals disconnected and aftermarket expansion cards removed, if applicable. Sometimes a clean reinstallation (after erasing the startup volume) may solve a problem that isn't solved by reinstalling in place, without erasing.
Corrupt NVRAM, which rarely causes panics, can be ruled out by resetting it.
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications for your model. Memory that is either slower or faster than specified may be incompatible.
The Apple Hardware Test or Apple Diagnostics, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.
In the category of obscure bugs, reports suggest that FileVault may trigger kernel traps under some unknown conditions. Most, though not all, of these reports seem to involve booting from an aftermarket SSD. If those conditions apply to you, try deactivating FileVault.
Connecting more than one display is another reported trigger for OS X bugs.
If your system is not fully up to date, running Software Update might get you a bug fix.
In rare cases, a malformed network packet from a defective router or other network device can cause panics. Such packets could also be sent deliberately by a skillful attacker. This possibility is something to consider if you run a public server that might be the target of such an attack.
If none of the above applies, make a "Genius" appointment at an Apple Store to have the machine tested. You may have to leave it there for several days. There isn't much point in doing this unless you can reproduce the panic, or if you can't, it happens often enough that it's likely to be repeated at the store. Otherwise you may be told that nothing is wrong.
Print the first page of the panic report and bring it with you.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore, and you have at least two independent backups.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Optical drive suddenly stopped reading

I was in the middle of ripping a series of CDs in iTunes when the drive suddenly stopped reading the CDs' contents - I have tried several CDs, including re-trying ones I had already ripped. It does not get beyond track list. Do I need a new drive or can I solve it? I have also tried using a CD cleaning disc. 3 years old iMac with Mavericks installed, no previous problems. It still reads disc title and content list and loads / ejects correctly.

Reset the NVRAM/PRAM and Reset the SMC, then try again.

Why does fcpx suddenly stop reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

why does fcpx suddenly stops reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

Could be systems logs or some other system file growing.
Use OmniDiskSweeper or DaisyDisk to map what's being used.
Regards,
Shawn

Why has my Adobe X suddenly stopped reading PDF files sent to me?

Why has my Adobe X suddenly stopped reading PDF files sent to me?

How are you trying to read them? What process are you using and what applications are involved?

IMac can't read usb card, says need correct codec, how do I get correct codec?

iMac can't read usb card, says need correct codec, how do I get correct codec?

What Mac OS are you running (from "About this Mac" in your Apple menu).
Codecs are usually required for viewing videos and should not affect whether the USB drive mounts. Can you tell us what kind of file your are trying to run from the USB drive? The pre-2006 iMacs this forum covers are no longer supported by most modern codecs
http://en.wikipedia.org/wiki/Codec

Bluetooth on imac suddenly stopped working

To start, thank you for reading this question with the intent to help. My imac LionOSX 10.7.5 . Does anyone have experience or knowledge about how the bluetooth to a computer can suddenly stop working. It happened at the same time that the computer start up slowed way down (Just took 4 minutes...i timed it so I could know for sure). It used to start up in about 30 seconds or less. (The computer itself seems to work as fast as normal once the start process has finished.
At first, I thought there was something wrong with my keyboard and mouse, but couldn't even log in to access the system preferences, as both were not working. So I grabbed an old keyboard and mouse from my Windows desktop, plugged them in and was able to log in. That is when I noticed that the bluetooth icon in the menu at the top right of the screen showed a line through the bluetooth icon and when I click on it, it says "bluetooth unavailable. When I click on the "About this Mac"/more info and look under bluetooth, it says "no information found". Also, the mouse I plugged in stopped working the next day until i plugged it into a different USB port.
My fear is that I accidentally downloaded some kind of malware that is eating up different functionalities on my computer. I did use a web-service to download a youtube video on neck exercises (how stupid of me...could have simply bookmarked it and pulled it up just as easily)
If you can help, I would be oh, so grateful. I know my way around computers in the most basic sense, but don't understand much about the how's, why's, how-to's of computer technology.
Thanks. Your friend, Patti P

Sorry I haven't gotten back with those of you sooner about your suggestions and how they have been working. Tried one day, but the site was down due to maintenance.
I have been trying all the wonderful suggestions people have given, but so far with no luck. It is absolutely clear that the problem is with the internal bluetooth and not with the keyboard or mouse. I bought an external bluetooth usb adaptor, and now my bluetooth devices are usable again, but the internal bluetooth is still unavailable. Thanks for letting me know that the long wait at startup was more than likely due to the system searching for the bluetooth, very comforting.
In one article I read, the person recommended trashing the plist file, com.apple.bluetooth.plist, but I couldn't find a file like this in the library. However, I did find a file named 'com.apple.Bluetooth.Audio.plist' which was modified on June 12, which is the same time the bluetooth stopped working. I don't know what to do with this file, since I really know nothing about how computers work, code, etc., etc. I just really enjoy the finished product, so to speak. But here is what I found when I opened the plist file.
Here is the first entry:
Root: previous input UID Dictionary: string Value: AppleHDAEngingInput:18,0,1,0:1
When I clicked on and opted to copy, this is what pasted when I pasted it: <?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<string>AppleHDAEngineInput:1B,0,1,0:1</string>
</plist>
There is a 2nd entry:
Key/Root: previous output UID Type/Dictionary: string Value: AppleHDAEngineOutput: 18,0,1,2:0
When I copied and pasted this string (or whatever it is called…it's all greek (or perhaps I should say geek) to me, here's what pasted:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<string>AppleHDAEngineOutput:1B,0,1,2:0</string>
</plist>
I also found two files that were logs of events that occurred on the 12th and 13th. I have copied and pasted this info and put it into two text docs, which if I can figure out how, I will attach in case someone is able to look at code and figure out what it means. That is way beyond me (and I envy those who can read this foreign language)
In addition, there is a folder named 'com.apple.BluetoothFileExchange.savedState' which was created on June 12th also. It has 2 documents, one named 'data.data' and another named 'windows.plist' I took a screenshot of the plist file which i hope I can include somehow in this post.
There is a 2nd folder created June 23 named com.apple.BluetoothSetupAssistant.savedState that has a data.data file and another windows.plist
These are the only files/folders that came up when searching the library under the key word bluetooth.
Thanks to everyone who was so willing to help. While I wasn't able to fix the problem, I learned lots of good stuff, like how to find my library, etc. so just know your efforts to help were not in vain.
Your (grateful) friend, Patti P

Imac suddenly stopped connecting to network

sorry if this topic already exists somewhere. i've been searching these forums for an hour and can't find any useful help on the subject.
we bought our first mac almost 1.5 yrs ago. this beautiful 27" imac worked fine for 1 year and then suddenly stopped connecting to our wireless network. distance to the wireless router isn't an issue. doesn't matter where i move it to in the house, it sees the network, but won't connect anymore. 6 other laptops/video game consoles/pc's all continue to connect w/o a problem. this happened once approx 3 months ago and i figured our old router had kicked the bucket, so i bought a new router and it worked fine for several months and now it's happening again.
i've gone thru all the preliminary steps of unplugging the modem, the router, the imac, and renewing the dhcp but nothing helps. it will work fine if i wire it directly to the router, but i don't want to run a 75ft ethernet cable thru the house.
i'm so frustrated with this supposedly wonderful imac! can anyone help me?

Here's something to think about... I know my AT&T DSL Cable Modem will only allow a certain number of connections. A few years ago that might not have been an issue, but now with wi-fi cells, gaming systems with netflix, other laptops/ipads, you might be exceeding that limit. It could be they are all connected and you don't have a spot on the router.
This might be elementary, but thought I'd throw that out there.
BW

Imac failing to read SDHC card

I cannot get my imac to read sdhc cards and any forum discussions are too old for Mountain Lion. And I'm as up-to-date with the software as it's possible to be.
Help!

it should I have no problems
it could be 1 of 2 things
1. the card is formated with a filesystem osx don't read or write
2. the card is corrupt and need a format

Why has Firefox 3.6.28 for PPC suddenly stopped reading stylesheets?

Yesterday, Firefox 3.6.28 running on a PPC Mac OSX 10.5.8 stopped reading stylesheets. Displays pages without style attributes.

Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings and that you allow pages to choose their colors in Firefox.
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://support.apple.com/kb/HT1343#odd10
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"

The card reader slot on my HP DV3T-2000 suddenly stopped reading my photo card. I have Windows Vista

I saw a fix for this with Windows 7, don't know if it would work for me.

Install Realtek USB 2.0 Card Reader Drivers from link below
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69558-1&cc=us&dlc=en&lc=en&...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

IPhone 4S stopped reading SIM card after 6 months

I have iPhone 4S it has a H2o SIM card that's worked for about 6 months no problem then one day it said SIM card failure I powered phone on/off once and started working again. Two weeks later it took 3-4 times of me cycling power on/off and removing SIM card and reinstalling it in order to get it to work. Then a week later it did same thing but took even longer. Now it won't read at all and I thought it was SIM card so I went and bought a new SIM card but no change, I looked online for help and even tried to put tape on tray/card like someone said but no change(if I even putting the tape in right place. I tried several different ways) Nothing seems to work. My phone was manufactured between 19-25 of March 2012 so hopefully I can get warranty but not original owner so not sure. Does anyone have any idea what can cause this? Why hasn't Apple fixed this problem since its been happening for a long time

The warranty follows the phone. It should still be covered as long as it has not been physically damaged, jailbroken, or hacked to unlock it.
Make an appointment at the genius bar. Apple has no way to magically fix a hardware problem without you taking the phone to them.

N95 suddenly not reading sim card

Hello I woke up this morning to find a comedy of errors with my n95 - after 2.5 months of perfect operation (bar a few resets) and with the latest firmware - the **bleep** thing refused to turn on despite leaving it on with the charger plugged and with full battery the night before. After several frantic attempts and battery reinsertion the phone burst back into life, but attempted charges came up with the message "phone not charging" this eventually went away but now the main problem.
The things not reading ANY sim card I put in it, these cards work in any other phone I put them in. Has the handset cocked up and needs to be sent back or is there some option I have not tried?

Does it ask for a pincode from cold start (switched off)?

Need help PLEASE!!! Elements12 stopped reading SD card from internal reader

Hi,
   Thank you so much for reading this. I have done everything possible to fix this and it is still plaguing me. Got Elements 12 back when it first came out and it worked fine.
   About a month ago, when I put the SD card in the internal card reader on my laptop, it automatically comes up and says this nasty little note that there is no program associated with the card reader.
   I have gone under programs and the defaults and changed all of them to opend with Elements 12. Also went under the specific suffixes and put Elements 12 as the default program.
   When I put the SD card in the computer, the autoreader comes up and asks what program I want to use for downloading the files. When I go down the list and pick Adobe Elements 12, that hateful X sound happens and then it says there is no program associated with..........
Have reloaded ALL the drivers on my computer and everything is up to date. The only thing that I can see is that it is due to the elements 12 program itself and I do not see where there is any way to repair the file WITHOUT screwing up my organizer that has over 40,000 photos on it.
Please any help would be so much appreciated.

I am running Windows 7 Home Premium. The autoplay box automatically comes up with the Elements 12 box to select, but when I click on it, it gives that hateful noise and says "that there is no file associated with it and to go to default programs and associate it with one. When I go to the Default programs, it gives this list of stupid stuff like "Paint" whatever that is, and stuff I never use and there is no way to add Elements 12 or any other thing. Have right clicked, left clicked and everything else but nothing works.
How could I uninstall the entire program and not lose my organizer that has 40,000 photos and videos on there? I don't understand it.
And, also, I have to admit that I have no understanding whatsoever to understand the link that you so kindly gave me. Sorry to be such an idiot, but I'm a nurse, not a computer expert and guess it is pretty clear that I just don't understand it. My husband is an IT person but has no idea what to tell me because he has never worked with stuff like Elements or Photoshop, etc.
Any other suggestions that I could understand would be really appreciated. Am just so frustrated.

Dvd drive suddenly stopped reading disks is there a usb dvd rom that can be used temporarily

my dvd stopped working I then bought the targus external usb dvd player and then it didnt work either does anyone know if there is a temporary fix

The drive very probably needs to be replaced. You have tried everything else possible, but one thing. Try to boot from the drive using your system recovery disks. If the drive can boot the hardware is not bad and it is a Windows problem. It is not a registry error or the drive would not show up in My Computer. If it is a Windows problem it is an odd one.

My iMac 27 suddenly stopped reading SD card.

Similar Messages

Maybe you are looking for