My iMac and iPad keep loosing the wireless connection to Airport Extreme issue started after I installed Lion?

Since installing Lion, I have been loosing my connection to airport Extreme after I have put my IMac in sleep mode.  My Ipad is also loosing the connection.  This issue started since the installation of Lion, is anyone else experiencing the same thing?

I've had that problem on my macbook running 10.5.8 for a few years. Sometimes it's worse than others. No other computer in my house has this problem.

Similar Messages

  • My iPad keeps loosing the internet connection. All of my other devices work. Last time this happened, comcast charged $49 to fix it. They said that it's somethin that I downloaded. How can I get back my internet connection on my iPad ?

    My iPad keeps loosing the internet connection. Last time this happened comcast charged $49 to fix it. They said that the problem was perhaps caused by something that I down loaded. All my other devices still connected to internet. Tried to reset my settings. Still won't work. Any advice ?

    First, changing your DNS settings could not possibly have any effect on this problem.
    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

  • Airport keeps dropping the wireless connection to my network 2 or 3 times a day.

    Hi,
    Since apple's recent firmware update for my macbook pro, airport keeps dropping the wireless connection to my network 2 or 3 times a day. It then searches for a network but can't find it, but if I select my network manually it connects immediately ???
    Any fixes for this ..... in layman's language please!
    Thanks,
    Steve

    It is not the router. There are a number of factors that are involved. If the router is a G/N router you may have to switch to G-Only (or disable N). You may also have a 5 GHz wireless phone or other routers in the neighborhood interfereing with the signal.
    Try this:
    1. Open network preferences. Take note of what IP address is assigned. Then, click Advanced.
    2. Click on TCP/IP and select Using DHCP with manual address and type the IP address below that.
    3. Click OK.
    4. Set your Router to Wireless-G only (or disable N) and change the channel to 11 or some higher number.
    This should keep it from dropping the wireless connection. It is a bug in the OS. Apple has not fixed it in 3 years.
    You wireless connection will be a tad slower, but you really won't notice.
    Hope that helps.
    DB

  • HT201250 WE KEEP LOOSING THE WIFI CONNECTION WHILE STREAMING TO VIDIO-HELP

    Why do i keep loosing the wifi connection while streaming to vidio- help

    Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

  • HT1998 My iPAD can use the internet through my airport extreme, but the airport utility does not see it so I can't create a guest password.  What am I doing wrong?

    My iPAD can use the internet through my Airport Extreme, but the Airport Utility does not see the device so I can't set a guest password. 

    If your Mac is using the Lion operating system with recent updates, it will be necessary to download and install AirPort Utility 5.6 for Mac OS X Lion
    Open Macintosh HD > Applications > Utilities > AirPort Utility 5.6
    Select the AirPort Extreme and click Manual Setup
    Click the Wireless tab just below the row of icons
    Click the Wireless Network Options button
    Remove the check mark next to Create a closed network
    Click Done, then click Update to save the new settings and allow 25-30 seconds for the AirPort Extreme to restart

  • How to disable the wireless section of Airport Extreme Base Station?

    Is it possible to disable the wireless section of Airport Extreme Base Station?
    It is because I do not want to have any high frequency radio signal which may be dangerous for small baby (no such proof for the moment, however).
    Anyone using the new Airport Extreme Base Station please check and help.
    Thanks!!

    I think you are a little too concerned. Just for the sake of how to, here it is.
    go to manual set up, airport, wireless, wireless mode, and then choose off.
    good luck.

  • When i start firefox it takes about 30 sec. and he is stopping the working of my mcafee? it started after i update to the 10 version!

    when i start firefox it takes about 30 sec. and he is stopping the working of my mcafee? its started after i update to the 10 version!

    Thanks for the feedback. You can also try to inform [https://community.mcafee.com/index.jspa McAfee].
    Firefox has a add-ons page to temporarily or permanently disable add-ons for checking: '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''.

  • HT1199 my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

    my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

    I don't think it's exactly an incomplete installation brody, but most likely in-correct permissions somewhere along the line that either happened, or became magnified during the upgrade. Also, it could be corruption as well.
    First thing to do, is boot up holding down Shift key to do a safe-boot so we an clean up any corrupted OS caches, after that do another reboot, but go to the Lion recovery, and scan the HD for errors, repair any if you find them, and then try to do a Repair Permissions job.
    That should fix the issue, if not, we can start doing a PRAM reset  and SMC for good measure.

  • I have a dv8t-1000 and the wlan and treble keep going on and off. I loose the wireless connection.

    I need to know how to open the laptop to replace the card that controls the wlan and treble. I tried to find a manual to show how to get the laptop open and then be able to get the card number so I can order one. I have removed the screws but can't get it appart. Can you tell me the type of card that I would need to resolve the problem so I don't loose the wireless conection every 5 minutes.
    Thanks
    highdiver

    The Maintenance and Service guide, which you can find here, can show you how to replace your wlan card.
    I am an employee of Hewlett Packard.
    - - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
    - - Please click the Kudos star if you would like to say thanks - -

  • I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network.  I select Extend Wireless network but have no success. Ideas?

    I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal.  The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available.  I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play.   I got the plug, but no play.  I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status.  I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times.  Then wait 45 seconds and the default settings will return.  I did all that, only to find out that after the initial flash of green, green never appeared again.  I got a fast flashing yellow light, followed by the light going off.  Apparently this didn't reset it properly.  So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
    highFly376

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • My iPad keeps pausing when I try to watch utube video   Started after I loaded iCloud on Mac. I'm wireless. Any connection or fix?

    My wireless iPad2 keeps pausing when trying to view utube. Just started since I loaded lion ox on my Mac. Is there any connection or fix ?  Also having trouble with FaceTime on iPad now

    Yes connected via wireless to iMac. Purchased new router after TW determined it was router. Still having probs with wireless dropping though modem & router appear to be working. Have to restart imac every time to get wireless to pick up again.

  • When adding Airport to a "receiver/amplifier" to play music from iTunes files on iMac and iPad, to what do I connect airport?

    When adding Airport to a "receiver/stereo amplifier" to play iTunes and other music files on my iMac and iPad, what do I connect Airport to? Aux on the receiver/amplfier? Thanks, Terrell

    How does iPhoto figure into this?  Your question seem more like an Airport question.
    OT

  • TM not showing the drive connected to Airport Extreme....

    Hi
    I've been backing up to a USB drive connected to Airport Extreme since I installed Leopard with no problem.. Since 10.5.6 it stopped working. I ended up erasing the drive, reformatting it, reseting the Airport Extreme, repair permissions, used Onyx and Applejack and still this is what I'm getting:
    When I go select the drive from the TM prefs. it doesn’t show. If I connect it to the laptop first. accept the TM offer to use it as its HD and connect it back to the Airport. I can mount the drive but when trying to start a manual back up. TM gives me the msg. “The back up volume is not in Mac OS Extended (journaled) format which is required”. I formated the drive one more time, just in case and same thing. Last I did a full back up with another drive having it connected directly to the USB port and it worked fine.
    I am running all this from my main Admin profile with file vault enable. I have another Admin profile without the file vault enable as an emergency because of a past experience and don’t really use it. and I have the guest acc. enabled.
    Does anyone have any ideas??
    Thank you.

    backups to directly attached drives work differently (and are stored differently) from network backups. they are not interchangeable. also, while in the past TM backups to air disks worked, they are not officially supported by apple so it's possible that 10.5.6 update broke that functionality. You can try the following terminal command which helps to show unsupported volumes.
    defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
    see if the airdisk shows up as a possible TM disk after that.

  • IMac and other Apple devices lose wireless connections

    We have two Apple iMacs, a MacBook Pro, an iPad and iPad2 and they all intermittently lose their Wireless connection to my network.  All of my PC's work just fine and stay connected.  This is funny... the MacBook Pro booted to Windows 7 Pro stays connected, but the MacOS doesn't.
    It appears to be a problem with DNS, because if you ping to a remote host, you get a response back.  Also, if you put an IP address into Safari on the iMac and MacBook then a site will come online.  However, the iPads just say "You are not connected" while in Safari.  I have verified that I'm using the correct DNS addresses provided by my ISP, and I have a Windows Domain server running DHCP/DNS on the inside of my firewall.
    We recently moved and were issued a new wireless router by our ISP.  I was thinking that might be the problem, but then we don't have the problem with any of the Windows PCs.  This router is manufactured by Arris.  My other router was a Cisco that worked like a champ.
    Turning off the Airport feature and turning it back on restores Web Browsing capability.  Interestingly, if I have a remote desktop session running, it never gets disconnected even when the web stops working.  Again, symptoms point to DNS issues.

    If you feel it's DNS related then change the DNS setting to:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • After about a half hour or so my new iPad air looses the wifi connection

    My laptop in the same location never looses the connection. Why does it happen with my iPad air ? I can get the connection back by either shutting off my ipad or going into settings then wifi and turning wifi off and then back on again. It connects right back up. The signal strength is full, I cannot find out why it does this, does anyone else have this problem or know how to fix it ?
    Thank you for any help.j

    The prolem is from fabric, You are not the first one with that problem. Those are the bad things of buying new technology when its aout, most of time comes with problmes. I recommend you to go to an apple store and them to tell you whats going on. I had the same problem and I pay a little and they change it to me to a new ipad but from the same model.
    Turn it on a try everything on the same store like that you dont need to go again and pay again.
    Good Luck.

Maybe you are looking for

  • Issue with embedding and usage of worklist TF in ADF app

    In our application, we have embedded the worklist TF from "adflibTasklistTaskflow.jar" in our jspx page. Below is the page def binding for the TF <taskFlow id="taskListtaskflowdefinition1" taskFlowId="/WEB-INF/taskList-task-flow-definition.xml#taskLi

  • Windows Server Backup - 0x80042407, seriously?

    I installed server 2008 on a test server with 4x250GB drives in a RAID5 array. Windows was installed on a 60GB partition, the rest of the array was left as free space. After installing updates and drivers, I decided that I wanted a RAID10 array.  Thi

  • Hi,about message?

    what is conversionID? what does it  feature ? When will it appear in message? why do not find ConversionID in the RWB? where is the ConversionID of message?

  • 10g Admin/Desktop error :could not locate or parse the .dbc file error

    Hi there, can any one help me how to fix this error i get this while connecting to Discoverer Admin/Desktop edition 10g ver 10.1.2 Unable to connect to: username@crp2 Failed to connect to database - could not locate or parse the .dbc file c:\oracle\B

  • Software bug in 2310 Mobile

    I am using 2310 mobile since 6 months , yesterday i found a major bug in software : Mobile is in lock position there is no option to open the menu other than using unlock and press * , while using radio FM if i press right button which is in middle f