My iMac cant see my airport express?

Hi, I have just moved into my new place and tried to setup my iMac and apple TV. My appleTV can see my airport express but my iMac cant. My iMac can see other wifi networks but the utility cant see it. I have reset my airport express and I have the internet plugged directly into it. Can anyone help?

Hi
When you say you reset the Express... which method did you use?
I would try a factory default reset, if you haven't already. If that doesn't work, then you could have an issue with your iMac
Good Luck

Similar Messages

Cant see my airport express

Hello, can somebody offer some advice?
I have a PC and a airport express which worked fine originally. They now dont like each other!? The PC seems to recognise the 'apple wireless network' but when using the admin utility (& set up assistant) I cant see my airport express.
Just the dreaded flashing amber light.
Have tried re-installing both my wireless network card and airport software but no luck.
Any advice?
Advent Windows XP

Found ip address solution in another site - ref allocating ip address manually (not dchp) see my other posts for details.

When using windows XP on my iMac, I cant see my AirPort Express

Everything works fine when I boot in OS X. I can connect, configure, print ect. from my iMac to the AirPort. But when I boot in windows xp, the airport does not even show up on the list of available networks.
What am I doing wrong here? Have I missed something?

Sorry guys!! Fixed it. Just updated the drivers with BootCamp, and now it workes fine! Så if you have that problem, here's how you fix it

I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?

I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?
I also get a message that I cant listen to music from itunes in my speakers in the other room that have been worked before?

I have fixed it so wi fi working in my iphone by doing my Airport Express to Zero by a nail in the little whole...but still has problem to get out my music from my iMac from ituens to my speakers in my other room that was working before...

Airport Extreme works fine. Cannot see two Airport express units

Hello. I just bought a new Airport Extreme and 2 Airport express units to replace my old linksys routers and to take advantage of my new MacBook Pro and iTV units. I am a Mac newbie after 20 years of PC's. The Netgear DGND3300 DSL modem feeds DSL signal to the Airport Extreme unit and it works well with good internet and signal. I am trying to use the 2 Airport Express units to extend the signal around the house. The Airport Utility has seen both of them but then they disappear and it cant find them again. They are 10 feet away for now until I get them configured. How do I get them to connect and how do I configure them to extend the wifi range?
Thank you.

The first thing to check is your AirPort Extreme.
Open AirPort Utility - click Manual Setup
Click the Wireless tab/label below the row of icons
Make sure there is a check mark next to "Allow this network to be extended"
Update to save changes
You may have already done this, but it was not mentioned in your post and is a critical step to "extend" the network.
"Hard Reset" each of the AirPort Express devices by holding in the reset button for 10-12 seconds. Then power down one device and configure one at a time.
Open AirPort Utility - Click Manual Setup
Click the Base Station tab/label below the icons
Enter a name for the device, device password and adjust Time Zone settings
Click the Wireless tab
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the AirPort Extreme wireless network
Check mark next to Allow Wireless Clients
Wireless Security = Same security setting as the AirPort Extreme network
Wireless Password = Same password as the AirPort Extreme network
Confirm Password
Update to save settings. Close AirPort Utility immediately as soon as you see the message that the settings have been stored. You should have a green light on the Express in 40-45 seconds.
Now, log back on to the wireless network provided by the AirPort Extreme and you should see the AirPort Express that you just configured, if you are using a Mac. The Windows Firewall or anti-virus software may block the connection if you are using a PC. (The AirPort Express "disappears" as soon as you click Update in AirPort Utility because it has joined another network...that's why you don't see it. It uses a "temporary" network with a name like Apple Network xxxxxs during the configuration only).
Configure the second AirPort Express the same as the first. You will probably want to assign a different device name to that Express to keep things straight.
To "extend" effectively, the Express should be located approximately 1/2 the distance between the AirPort Extreme and the area that needs more wireless coverage. Depending on obstructions, you may need to alter this distance a bit.
The "extend" setup works like the hub and spokes of a wheel. The AirPort Extreme is the "hub" and each Express resides at the end of a "spoke". Each Express communicates directly to the "hub", not to another Express at the end of another spoke. For that reason, you cannot "extend" a device that is already configured to "extend".
Message was edited by: Bob Timmons

Itune on iMac cannot connect to Airport Express, but Itune on XP can

Hello
I've the following situation:
Itune cannot see the Airport Express unless my Iphone Remote controle is connected to Itune. And eventhough, Itune fails to connect to it.
Here is the environment of my network
1) third party LAN/Wireless router (connected to the internet)
2) iMac (10.4.11) connected via the LAN port to the router
3) Airport Express (7.3.2) connected to the wireless network
4) one Iphone connected to the wireless network
5) one XP computer connected to the wireless network
6) All devices are in the same subnet
What really puzzle me is that Itune on the XP laptop can broadcast music to the Airport Express without any issue. But Itune on the Mac does not see at all the Airport Express unless I connect my Iphone to Itune. When I do so, the Airport Express become listed in the status bar of Itune. But if I try to make Itune connect to it, it try for a while then it stop trying without any error message.
I really don't understand what is going on. Does any body can give my a bit more information how Itune and Airport Express communicate? Or have any idea where I should direct my troubleshooting?
Thanks in advance for any help

So did i screw something up last night when i connected using my PC?
That sounds likely. Maybe the security type or password?
And if so how do i re-set the link with my mac??
Try the options described on pp. 30-33 of http://manuals.info.apple.com/enUS/AirPort_Express_SetupGuide.pdf
Once you get things working again, suggest you save the settings in a profile. In future when you bring the PC home, create a different profile for experimentation. Switch back to the usual profile when you're done with the PC. Eventually, you should be able to develop one profile that works with both machines.

HT4587 Utility cant find the airport express, windows8

Utility cant find the airport express, windows8

3 common causes when this occurs:
1) The Windows FireWall is blocking the connection attempt between AirPort Utility and the AirPort Express
2) The PC anti-virus software is doing the same thing
3) Microsoft Security Essentials....if installed...is doing the same thing
Check the settings in each application to see if a "block" is occuring, so you can make an "exception" or "allow" the connection to occur.
It might help to try a direct connection from an Ethernet port on the PC to a LAN <-> port on the AirPort Express. If you can configure the Express this way, you can disconnect the Ethernet cable once the Express has been set up.
Although primarily used for printer communications, it is a good idea to install Bonjour for Windows, as Bonjour may help communicatons on the network.
Bonjour Print Services for Windows v2.0.2 - Support - Apple

Airport Utility can no longer see my Airport Express Base Station.

Hi all the problem I have is as follows;
I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
Any advice would be greatly appreciated.

If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

Updated my iTunes and now my mac can not see my airport express no matter what I have tried

recently updated my itunes and the firmware on my airport extreme and suddenly itunes does not recognize my airport express for speakers and my mac through airport utilities can not see my airport express. *** I have tried everything and nothing will bring the airport express back to life what to do

rosenkd wrote:
*** I have tried everything
... including a "hard reset" or a "factory defaults reset"?

PC cannot see wireless Airport Express using Ethernet on D-LINK DIR-655 Router

This seems to be a recurring issue going way back, but I have yet to see a real solution posted.
I am using my Airport Express (APX) to stream music from the computers on my network to my stereo via Airplay. I have APX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my APX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my APX. I can, however, see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the APX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting the APX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting APX when I turn their wireless connections back on. So, bottom line, I am convinced that this is not a firewall problem. Although I have tried every conceivable setting of my D-Link router and APX, I am convinced it is either a wireless to ethernet communication issue, or some obscure setting on APX.. Any help would be appreciated.
Thanks,
Wayne

I think I found the fix based on reading some Apple TV forums where several people were having the same problem. Under Advanced Network settings in the D-Link setup, I just checked "Enable Multicast Streams" and that seemed to do the trick.

Itunes can't see my Airport Express speakers after I close my laptop

So this is a weird issue- and I haven't been able to find a prior discussion on this topic. Apologize in advance if I asking something that is already well documented.
but I've seen the problem on two separate laptops now: if I stream my itunes through my airport express speakers and then subsequently close my laptop (presumably putting it into hibernate or some other energy saving mode), itunes cannot see the airport speakers upon reopening the laptop. I have to reset Itunes - and then it will see these speakers every time. Same thing happens when I reset my airport express- sometimes I have to reconfig the router through the airport utility. As soon as a press update and the router resets... then itunes cannot see the airport express speakers.
Not a huge issue- just requires a lot of rebooting to fix. Buts its frustrating.. my macbook speakers are lame. I wish itunes has some sort of speaker refresh button that would reset the speaker settings.
My wife says it is known itunes bug.. anyone know anything on this?
Thanks in advance everyone!!

1. Did you try just to switch back to the cpu-speaker and the directly back to the express?
2. Did you do a firmware update of your express? Just open the express-server-program to do so.

My Airport Utility doesn't see my Airport Express??

My Airport Utility doesn't see my Airport Express. . .so I cannot run iTunes. . it used to work fine. .

Version of utility, and express? Makes a huge difference.

The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

The connection between my iMac (8.1) and Airport express keeps dropping out all the time., The connection between my iMac (8.1) and Airport express keeps dropping out all the time.

Hi BillCilla,
If you are having intermittent but persistent drops in AirTunes via your AirPort Express, you may find the following article helpful:
Apple Support: AirTunes audio stream drops or cuts out
http://support.apple.com/kb/ta21538
Regards,
- Brenden

Getting Windows PC to see wireless Airport Express printer in mixed network

I have a wireless network that has been working well. Base station is a SMC wireless router with two Macs connected via Ethernet, a MacBook and a Dell Windows XP joining in wirelessly. No problems. I recently added a Canon Pixma i4200 connected to an Airport Express in client mode. I set up the Airport Express via the MacBook and have no problem printing wireless to the Canon from the MacBook.
The question is how to set up the Dell Windows XP system to see the Canon printer? We tried installing the Canon print driver, but it really wants the printer to be plugged into the PC and won't complete the driver installation. We'll go ahead and plug it in for the setup I guess and then disconnect it. Since I already configured the Airport Express via the MacBook, I didn't want to try to set it up via the Dell PC, but is that likely to help?
This network is such a mixed bag, I think I'm lucky to have everything working as well as it does. Happy to be able to print wirelessly to the new Canon from the MacBook, but my wife wants to be able to print to this printer from her Dell upstairs. The nice feature of the Canon is that it prints duplex.
thanks for any help
Rick
MacBook, iMacG5, G4, Dell PC Mac OS X (10.4.7) Wireless home network: SMC wireless router base, Airport Express remote driving USB printer

The question is how to set up the Dell Windows XP
system to see the Canon printer? We tried installing
the Canon print driver, but it really wants the
printer to be plugged into the PC and won't complete
the driver installation.
Do that first, connect the printer to the PC and ensure it is installed and working.
And then connect the printer back to the Airport.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

Anyone have any ideas why i can no longer see my Airport express speaker in Airtunes?

for the last couple of days i no longer can see my itunes speaker from an old Airport Express (V 6.3) 802.11g. Airport Utility 5.6 still lets me set it up, so I can see it there. but for some reaason i can no longer see that speaker selection in itunes or any of my devices. Any ideas? Thanks.

Hi Murray,
What version of Acrobat or Acrobat Reader are you using? Are you trying to open the PDF files from the Finder, or in Acrobat/Reader?
We look forward to hearing back from you.
Best,
Sara

My iMac cant see my airport express?

Similar Messages

Maybe you are looking for