My imac desktop crashed, had a white screen, inserted startup disc, I want to restore all info from before but don't know how without re-installing leopard..
I went online and in the original content booklet that came with my mac. Ive tried starting it up holding shift, option, and control option P and R. I put in the original startup/install cd but I want to avoid re-installing everything and losing all my content. (files, songs etc). How can I get past the leopard installer to see if I've lost everything? And not sure what leopard I'm running but its about 4 years old.
See Kappy's going back to SL from Lion guide.
Similar Messages
-
My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?
Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694 -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks
Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?
-
I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!
It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.
-
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
I downloaded ringtone from the app store,but then i had to change my phone. I thought i had backed up all of mydownloads but the ringtone did not load to the new phone. I have the receipt number in my e-mail but don,t know how to retrieve it
-
I have lost Lightroom 5 due to a crashed hard drive. I don't have a back up disc, and I dont think I have a key. I have a an adobe key recorded but don't know if it relates to LR5. I have an LR4 disc and key. LR5 is still intact and running on my laptop, but I need to use LR% on my desktop PC. I need an address to try a download so that I can try the key which might fit it. Any ideas how I can transfer the program (with key) from my laptop? Any other ideas?
John Carden <[email protected]>Just download and install.
you can find by internet search for "download Lightroom", or click here:
https://creative.adobe.com/products/download/lightroom
Note: trial software is same as licensed software, once you license it.. (I hope you still have the license key). -
Safari crashed - Now keeps restoring all info from date of crash - Unable to reset
Hi There
My Safari crashed back in April and the restore function saved all the open web sites, history, cookies, settings etc from that day. Every time I restart my computer my Safari goes back to the April settings which is very annoying.
I have tried to reset safari, erase everything but this has not worked. Safari also goes back to April settings after opening it after a Force Quit.
I have also tried clicking the box for opening up previous applications upon restart in the hope that it will remeber the settings and applications open up at the time but this is not functioning as it is mean't to.
Any suggestions or assistance would be appreciated.Read this whole message before doing anything.
Back up all data.
Quit Safari if it’s running. Then select ▹ Force Quit... from the menu bar. A small window will open with a list of running applications. Safari may appear in that list, even though you quit it. If so, select it and press return. Close the window.
Step 1
Hold down the option key and select Go ▹ Library from the Finder menu bar. Delete the following items from the Library folder (some may not exist):
Caches/com.apple.Safari
Caches/com.apple.WebKit.PluginProcess
Caches/Metadata/Safari
Preferences/com.apple.WebKit.PluginHost.plist
Preferences/com.apple.WebKit.PluginProcess.plist
Saved Application State/com.apple.Safari.savedState
Leave the Library folder open. Try Safari again. If it works now, stop here. Close the Library folder.
Step 2
If you still have problems, quit Safari again.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
rm -fr $TMPDIR../C/com.apple.Safari
Quit Terminal. Launch Safari and test.
Step 3
If Safari still doesn’t work right, quit, go back to the Finder and move the following items from the open Library folder to the Desktop (some may not exist):
Cookies/Cookies.binarycookies
Preferences/com.apple.Safari.LSSharedFileList.plist
Preferences/com.apple.Safari.plist
Preferences/com.apple.Safari.RSS.plist
Preferences/com.apple.WebFoundation.plist
PubSub/Database
Safari
(Note: you are not moving the Safari application. You’re moving a folder named “Safari.”)
Try again. This time Safari should perform normally, but your settings and bookmarks will be lost.
If the issue is still not resolved, quit Safari again and put all the items you moved to the Desktop back where they were, overwriting the newer ones that will have been created in their place. You don’t need to replace the files you deleted in step 1. Stop here and post again.
If Safari is now working normally (apart from the lost settings), look inside the “Safari” folder on the Desktop for a file named “Bookmarks.plist”. Select File ▹ Import Bookmarks from the Safari menu bar. Import from that file. Recreate the rest of your Safari settings. You can then delete the items you moved to the Desktop.
Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each step to make sure you haven’t restored the problem.
If you don’t like the results of step 3, you can undo it completely by quitting Safari and restoring the items you moved or deleted in that step from your backup, overwriting any that were created in their place. -
I would like to remove an item from my desktop but don't know how to do it
Hi can anyone help me remove an item from my desktop, i do not know how to do it.
If it's not a mounted disk image, drag it to any one of the items in the Finder's sidebar, or any other folder if you're running Mac OS 9. If it is, drag it to the Trash.
(64024) -
Since this product is no longer supported by the manufacturer, I hope that someone out there will be able to help me find a way to get my calendar and contacts restored to the desktop. My handheld sat unused for a very long time, but my desktop calendar and contacts were current up until my hard drive crashed. I was able to recover the PalmOne files from the crashed hard drive but all I can see are *.dat files. When I try to import or restore, the *.dat is not a supported file extension. HELP! I have the original installation CD. Thank you
Post relates to: Zire 31
This question was solved.
View Solution..dat are the actual working files Palm Desktop is looking for - you can't import them.
Just create a user in Palm Desktop and copy the .dat files (that have more than 1k of data) over the existing address.dat and datebook.dat (or calendar.dat, I forget which existed on your device).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Like i said i bought some gems and then realized this game has major problems even after there update crashing all the time laggy sometimes wont load it's terrible and i want a refund, please help.
The main problem is that you made the first and second slot machine to pay out 2 quarters after 3 games and the third machine pay out two quarters after two games. That is not what your assignment specified.
SlotMachine firstSlotMachine = new SlotMachine (2,3);
SlotMachine secondSlotMachine = new SlotMachine (2,3);
SlotMachine thirdSlotMachine = new SlotMachine (2,2);
The second problem is that you never add the payout of a machine to Martha's number of quarters.
Look carefully at the way your professor implemented the game() method. If you think about it, what it returns is the net "gain" from playing a game. On jackpot it returns payOut -1 (jackpot less the one quarter Martha had to pay for the game), otherwise it returns -1 (Martha spends one quarter and wins nothing).
So what you can do is simply add the returned value to the number of quarters in the jar -
quarters = <machine>.game();
instead of quarters--. -
I use Dreamweaver and Adobe Bridge to create slide shows on my website. When 'previewing' the slideshow - in Dreamweaver it opens Firefox - it crashed and the dialogue box opens telling me to change my 'settings' - it doesn't do this if I preview in IE - which I don't understand. I need help in knowing where to go to change the security settings so that this doesn't happen. Incidentally, when I am on the web through Firefox, my website slideshows work perfectly>
You can set the pref dom.ipc.plugins.timeoutSecs to to -1 on the about:config page to disable the timeout.
See also http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
really want to change the background color of my documents in the mobile app. ive tried to search the answer online, in blogs and other various 'life hacks' blogs or articles, but so far everyone is talking about the desktop version. i really want to figure this out. is there even an option for the mobile version for windows? the only editing icons when a document is open are: export, home, make public, search in document, highlight/strikethrough/underline/comment and continuous/single view. if there isnt an option to edit background color, can i suggest that the makers of the windows mobile version make one, and make it fast please! any help would be appreciated. -CHANGE BACKGROUND COLOR
hi, thanks for helping me ...
i have used the above url and made changes to my OAF page, but i didn't get the desired output and its also giving as the above code output .
i kept OraBgGrayVeryDark in Css style in property inspector for every region including PageLayout and i also did some changes in cabo/styles/*.css classes.
eventhough it is picking the color upto footer level only and it is not applying for advanced table also.
can anyone please give your views in this.. -
I have had my Iphone 5 for a little while now and today I connected it to Itunes to download a movie to my phone. I thought I had to restore the phone so I restored it back to my iphone 4. I deleted all the new ringtones I just bought and I lost all photos and notes I had on my iphone 5. Is there a way to unsync?? Is there a way to recover what I lost. I downloaded wondershare but I can't recover from an Iphone 5 and I hadn't synced the iphone 5 with itunes until today but again i restored it back to iphone 4 data.
It can not do that all by itself.
When you plugged it in, iTunes said 'Oh goody! You got a new phone! Would you like to make it just like your old phone?'...
You explicitly said 'Yes'.
You can't undo that.
No backup of the current state of the new phone was made. It was wiped and the last backup of your old phone was restored to it.
Anything you had on the new phone is gone. -
Sorry, I put my question in the wrong place. I'm afraid I will lose all my photos, etc., on the iPad.
To import your photos to iPhoto, open the app on oyur computer, then connect your iPad. wait for it to show up on the left toolbar and you can select all and import them to your iPhoto library. Drag and drop it to your desktop or wheverever you want them. Is it just photos you wanted to import?
Maybe you are looking for
-
I have already backed up all the itunes files on two different external drives. And I have already set up icloud and itunes match. I am still paranoid about deleting the files from my MBP, but I need to free the space. What steps should I take to del
-
Router config for console modem access
We're upgrading 2500 series routers with 2811's in several remote sites, and we have preferred modem access to be connected to the console port as opposed to AUX, in order to see boot-up and diagnostics we wouldn't otherwise see. Our only issue is th
-
I am using jswdk-1.0.1 and JDK1.3 in Windows 2000. I start the servlet, but when I invoke the html page I have the following message, and the servlet didn't run. How could I do to run this application? JSWDK WebServer Version 1.0.1 Loaded configurati
-
SharpZipLib : PathTooLong exception
0 Hey, Is there any sample code for unzipping a zip file using SharpZipLib? I tried few samples. But seems that for longer paths it throws PathTooLong exception. I think there is a solution for this using SharpZipLib. Can someone provide me an exampl
-
I need to download CS6 using Internet Download Manager. How can I curcimvent the Adobe Download Assistant?