My iMac did not recognize blank dvd

I try to burn some picture into blank dvd+r but the imac did not recognize the blank dvd. But if i insert dvd with content in it the dvd icon show up. I try to burn the picture many ways but all seem to fail. I need some expert advice please!!!!!

https://discussions.apple.com/thread/4050516?start=0&tstart=0 <<< click here.

Similar Messages

Ibook does not recognize blank DVD - profiler looks suspicious

I have an ibook g4 1.42GHz running OS 10.4.11 purchased used about 10 months ago.
All of the literature says it should have a SuperDrive which should be able to burn DVD (SuperDrive DVD±RW/CD-RW). However I cannot get it to recognize a blank DVD. Plus iDVD brings up a message saying "your macintosh does not have a supported Superdrive...you will not be able to burn a dvd"
Doing some digging, the System Profiler looks like it thinks i shouldn't be able to either:
MATSHITA CD-RW CW-8124:
Firmware Revision: DB0D
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
Burn Underrun Protection CD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw
Media: No
Says nothing about being able to burn dvd?
I am not aware that this model ever came NOT able to burn dvd. The only explanation i see is that the person i bought it from may have had it refurbished for some reason and they put in the wrong optical drive? Is that possible?
Or does anyone have any other explanation or fix?

Hi
What you mean exactly? Does the drive does not recognize content on the media or there is problem if you want to burn data on DVD-R media?
Can you please explain all this a little bit more preciously?
Just for info: I use TDK empty medias almost 5 years and I can say that TDK is very good manufacturer for this stuff.

DVD drive will not recognize blank DVDs after upgrade to Lion.

It finds burned DVD/CDs but not blank ones. Disk utility partially sees blank dvd, gives option to eject it, but will not allow eject it. Finder does not see it at all. have to restart to have it eject. Tried different DVD's (Manufactures and -R / +R, etc). Have followed recommendations on resets and have even reloaded the OS. This problem started immediately after upgrade from snow lepoard to lion.

Repairing permissions yes. But in my head, if everything is working fine for it, just won't read Blank media, could it be a software thing?
I'll give it a shot in a few hours

DVD drive does not recognize blank media

I have a Matshia DVD-RAM UJ-841S DVD drive, that will not recognize blank DVD media. This has been going on for a while now, so I don't know 'what has changed'. It will recognize/burn CD's, will play DVD's, but will not recognize blank DVD media. I have tried reinstalling the driver, tried different types of high quality media (Verbatim, Memorex etc). I have burned many DVD's in the past, this drive is (was) capable of doing it (despite what Microsofts FixIt programs says). I'm not terribly techy, so if it is a registry problem you'll have to explain it very carefully.
Thanks,
Rodney

I HAVE BEEN HAVING THE SAME PROBLEM. I CAN BURN TO MY COMPUTER - COPY A DVD - BUT CAN'T COPY TO A BLANK DISC AND HAVE TRIED ALL KINDS OF MUSIC DISC???
NEED HELP ALSO.
SHAROON

Super drive doesnt recognize BLANK DVD-R

I can watch dvd movies but cannot burn anything on a blank dvd-r because the driver do not recognize blank dvd-r. what can it be?

If you've tried different DVD discs from different DVD packs, and all discs will not allow you to burn, then it's most likely a faulty drive. Hopefully you still have a warranty.??
Gramps.

My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down"

My iMac will not recognize a blank DVD-R that I am trying to burn. It also won't eject unless I "shut down" and restart while holding down the mouse button. Anyone have any remedies?

I ran into a similar (identical?) problem. I inserted a DVD-R and my imac would not recognize it. The only way to eject was to do a restart. I tried some of the SMC reset stuff. That didn't work. I came across another thread on macrumors (http://forums.macrumors.com/showthread.php?t=336501)
that solved my problem.
I have an external Western Digital Passport drive that I use for timecapsule. It turns out
there are two files that WD adds to the /Library/LaunchDaemons that interferes with the
SuperDrive. I removed the WD files from the LaunchDaemons directory and everything works fine
now. Again, refer to the macrumors thread for more details.
The files I removed from the LaunchDaemons directory were:
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
..yes I had installed the WD backup software to see if I liked it....I did not, but didn't realize this files would cause a conflict with the SuperDrive.

Premiere Elements 12 does not recognize blank Blu-ray disc.

I just upgraded from Premiere Elements 8 to PRE12. Now when I insert a blank Blu-ray disc in the BR burner, I get a message "Media Not Present". It does recognize the burner, but not the blank disc. Yet when I open PRE 8, PRE 8 does recognize this very same disc in the same burner! Also, PRE 12 can burn a blank DVD in this same burner. The Blu-ray disc also appears as a completely blank in Windows File Explorer. And this is a problem even after updating to release 12.1. The Adobe chat representative tells me this is a know issue with PRE12. I find that difficult to accept, since why would Adobe change in PRE 12 something that was not broken? What's the truth, and when and how can it be fixed?

First, I tried uninstalling, register cleaning and reinstalling Premiere Elements. This was a mess. I kept getting error messages when trying to reinstall. So I had to do a system restore to just before I uninstalled PRE. After that restore, PRE would not open. So I did another uninstall from Control Panel and reinstall, without touching the registry. Then, I was back in operation, several frustrating hours later. But still the BR drive would not recognize Blu-ray discs.
So then I loaded a BR-RE disc, instead of a BR-R, and still no recognition.
Then I installed the external Blu-ray burner, and finally PRE12 recognized the blank Blu-ray disc. I had a sign that this would work when I attached an external DVD drive to burn a AVCHD file, and PRE12 recognized the blank media, whereas it did not recognize any blank DVDs in the internal BR drive for burning AVCHD files. As a alternative to borrowing an external BR drive to see if this fixes the Media not Present message, I suggest using a much more readily available external DVD drive and try to burn a AVCHD file first. If that works, then one can be much more confident that purchasing an external Blu-ray drive will provide the solution.
Yet I deeply resent having to purchase a $125 piece of hardware, which is otherwise useless to me, to fix a bug in a program. The box promises the ability to export a Blu-ray disc. Since their lawyers use the weasel word "compatible" Blu-ray burner required, I fully expect them to take the position that now only an external burner is "compatible", and do nothing to fix the compatibility with internal burners. Potential buyers be forewarned!
As an alternative to paying more money to make their software work as indicted on the box, one might want to settle for only being able to write AVCHD files to a DVD. Most every computer (except Ultrabooks) has an internal DVD burner, which supposedly all that would be needed to burn this kind of HD file. But first, we all need to know, will PRE12 return a Media not Present message when burning a AVCHD file to an internal DVD burner? What are the field reports of any problems incurred doing this procedure? Please advise.
And one more question. When I burn an AVCHD file to a DVD, the DVD is not finalizied by PRE12. After burning the AVCHD file, the DVD shows free space available, but after burning a DVD Video, there is no free space available. Moreover, ImgBurn does finalize DVDs after burning AVCHD files to them. So Is this failure by PRE12 to finalize another bug? Can ImgBurn now finalize an unfinalizied AVCHD disc left by PRE12 -- without having to run another session of PRE to burn to a folder now, of course? If so, how?

Burner won't recognize blank dvd

Hi,
I have an old cd/dvd burner I bought from best buy years ago. Tried burning a dvd and it wouldn't recognize blank dvd..it keeps saying "please insert dvd" even though there's one in the drive. It burns CD just fine. Plays DVD just fine. I have tried using SEVERAL other burning programs and still doesnt work. Please help.
Also uninstalled and reinstalled the drive several times...going crazy here.

Just to make sure, are you SURE it's a cd AND dvd burner? There are drives out there(I mention this since you said years ago) that were CD burners, with the DVD ROM feather.
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

DVD drive does not recognize burned DVD

Test DVDs are recognized on other G5 DVD drive. Problem has been intermittent but now constant. This one just spits them out. It does recognize blank DVDs and CDs. HD permissions repaired. Profile info below
ATA
SONY DVD RW DW-U10A:
Model: SONY DVD RW DW-U10A
Revision: A43h
Serial Number: EA4CEA71
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Disc Burning
SONY DVD RW DW-U10A:
Firmware Revision: A43h
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 8192 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No [this with burned DVD in drive]

Hi there. count me in on the Sony DVD problems. My Dual 2 GHz PowerPC G5 will not recognize the Adobe Creative Suite 3 DVD for installation. The DVD works fine in other G4 systems.
The DVD drive will recognize data CD's but this Adobe DVD just churns and hums for 30 seconds and then the drive ejects the disk.
DVD Laser Lens Cleaner from Radio Shack will not load either.
This is the drive:
SONY DVD RW DW-U21A:
Firmware Revision: AADB
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
After reading the boards, it sounds like the Pioneer DVR-112D 18X DVD Burner (Drive only) is the unit to buy and replace this Sony one.
There appears to be a spacer issue related to the door on the G5 Tower case. Will the spacers from the Sony unit work on the Pioneer unit, or can the Pioneer unit just be installed as is using the existing ribbon cable. I've read the PMG5OpticalDriveDIY.pdf replacement manual, but am confused about SuperDrives vs. the Pioneer DVR-112D.
Can anyone clarify the details of replacement?
Also, will I need new software (Roxio, Toast) to burn CD's and DVD's after replacing the drive?
thanks, and best regards,
Eric

DVD RW drive can't recognize blank DVDs

I'm having some difficulties getting my PowerMac Tower DVD RW drive to recognize blank DVDs. I'm able to burn and read CDs with no problems, and I can read DVD movies as well. However, when I insert a blank DVD+R (Memorex DVD+R 8x 4.7GB), the drive spins on and off and after 30s or so, it spits the DVD out with no error. Any idea what the problem is?
System Profiler shows the following info:
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
PowerMac Dual 2.7GHz G5 Mac OS X (10.4.6) 4.5GB RAM

I agree that another media brand is in order. Memorex does not make quality media and this may be the problem.
TDK and Maxell make highly regarded media. Princo is labeled as "3rd class" by the DVD Media FAQ at digitalFAQ.com.
I use TDK almost exclusively and have yet to have a bad burn.

Error in iCal: The server did not recognize your user name or password for account "Gmail."

To keep my iCal up to date on two computers, I export an Archive in one and import it to the other. Yes, I know I should use the Cloud, but humour me.
Export of iCal from my MacBook Air (OS 10.7.5) no longer works when imported to my desktop (OS 10.6.8). It returns an error saying "The server did not recognize your user name or password for account “Gmail.” Make sure you enter them correctly."
After dismissing this dialogue box twice (it offers no other options, iCal crashes.
I've turned off the option on my MacBook that asks to use my Gmail account, but since I can no longer launch iCal on my desktop, it can't import new data. How can I clean out the brain of iCal on the desktop so that it will open -- blank -- and perhaps accept a new version of my iCal data?
Thanks,
Bruce

iCal
MobileMe
Apple Support

My iMac does not recognize external hard drive

My iMac does not recognize my external hard drive. Disk utility recognizes it and a test of the hard drive does not review any error. I use the hard drive as a back up for the time machine. This problem comes and goes. It comes when I turn off and turn on the computer, with the hard drive attached.
Please help.
Insightful

can be this reasons
01 , you have problem with connection ? check the port if you can find any problems physically .
02. if not try to change the cable and with connection ,
03. may be its good idea to check the hard drive with another mac ?(if you have )
Did you note any diference of sound from Hard Drive ? listen to it that carefully to note some unusual sound comes when the hard drive works.
check this link this might usefull: http://www.youtube.com/watch?v=JjgOSxKy-FQ

IMac does not recognize all photos in iPad photostream

My new imac does not recognize all the pictures in my ipad photostream. I have over 800 pix in my ipad photostream and imac will only recognize 300 when i have it plugged in to import. Any ideas?

Nevermind, I just spoke with my wife who imported the pictures last night just from that event. She did not delete them after importing either. I guess next time this happens I will uncheck the box that says "Do not import duplicates" to troubleshoot.

HT1277 what to do when i get the message: email server did not recognize username and password combination.

I changed the password on my iphone yesterda and now i can't send mail on my Imac via My gallery : the message is: email server did not recognize username and password combination

I found that by turning of the SSL option at the bottom of the Accounts panel did the trick.

TS2570 iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

Phillip,
I had this problem recently with a 3-year old Mac Pro intel, which was eventually replaced by Apple due to myriad other problems. When the frozen mouse happened, there was nothing I could do. Very frustrating to have the screen boot and the cursor is up there stuck, on the top left corner of the screen. Frozen. I called support several times. They were amazed. At one point they had me buy a cheap USB mouse (I was using a wireless mouse from Logitech and they thought there might be some kind of conflict). The USB mouse didn't work, either. Neither did an Apple mouse when I went out to buy one.
I ended up driving 70 miles to take the Mac to an Apple Store. I think they reinstalled the (Leopard) system in some secret way, because when the mouse was frozen so was everything else and I couldn't open the disk drive to put the OSX disk in there.
Why I'm here right now is that the same thing happened today with my NEW 3-month-old REPLACEMENT MAC PRO using its brand new wireless mouse, and I was hoping to find some insight. Again, a frozen cursor after the boot. Same top-left corner of the screen. Unlike you, when I click the mouse nothing happens -- no drop down.
Luckily, when I hard-rebooted by holding the button in, the mouse cursor came back. This time. Now I am afraid to turn my computer off. Been there done that before. Anyone have suggestions?
Thanks in advance.

My iMac did not recognize blank dvd

Similar Messages

Maybe you are looking for