My Imac does not recognize a TEAC CDW54E with Mac OS 10.2.8

I have an iMac 333Mhz and a TEAC CDW54E external USB CD Burner. This burner works so good with Mac OS 9.2.1, but when I start my computer using Mac OS 10.2.8. the finder does not activate and recognize the CD burner. This burner needs that the finder activated the CD unit in order to recognize it. The Apple System Profile recognize an extenal USB Mass Storage Unit, but not the TEAC CDW54E CD burner. The Toast 5.2 Lite does not recognize any recorder present. I want to know if somebody have a driver or a Terminal Instruction in order to help the Mac OS 10.2 to recognize this CD burner.
Best regards.
Jose Blanco.

I have the same drive (a PC friend gave it to me when they upgraded to an internal drive). Teac does NOT support the Mac. The only way I could get the CDW54E to work was in OS 9 and only with an older version of Toast. I gave up and brought the drive to work where I have to use a PC. It works fine with XP Pro. My suggestion (if it fits into your budget) is buy a $99.00 DVD/CDRW burner and be done with it (I suggest one like this model from OWC: http://eshop.macsales.com/shop/firewire/optical-drives/). When you get the chance to buy a newer Mac, a drive like this will make the move with you easily. Trying to get this burner to work in OS X will continue to be a lesson in frustration. Good luck. I hope you find a way to prove me wrong. The cheapest alternative is forget about burning disks in OS X and keep on burning them in OS 9.

Similar Messages

My imac does not recognize an external hard drive

I have bought an USB external drive but my Imac does not recognize it,
the external hard drive does not appear in the desktop neither disk utilities.
characteristics of the disk
toshiba, 1TB, USB 3.0
thanks

The problem is NOT the fact that it is a USB 3.0 drive, as USB 3.0 is backwards compatible with USB 2.0. The problem is specific to Toshiba Canvio portable drives. They only work if you use a micro-USB2 cable instead of the included USB 3.0 cable. This problem does NOT affect other USB 3.0 portable drives (Seagate, Western Digital, etc.), and they work fine with USB 3.0 cables.
Once again, you need a micro-USB2 cable for the Toshiba to mount.

My iMac does not recognize external hard drive

My iMac does not recognize my external hard drive. Disk utility recognizes it and a test of the hard drive does not review any error. I use the hard drive as a back up for the time machine. This problem comes and goes. It comes when I turn off and turn on the computer, with the hard drive attached.
Please help.
Insightful

can be this reasons
01 , you have problem with connection ? check the port if you can find any problems physically .
02. if not try to change the cable and with connection ,
03. may be its good idea to check the hard drive with another mac ?(if you have )
Did you note any diference of sound from Hard Drive ? listen to it that carefully to note some unusual sound comes when the hard drive works.
check this link this might usefull: http://www.youtube.com/watch?v=JjgOSxKy-FQ

IMac does not recognize all photos in iPad photostream

My new imac does not recognize all the pictures in my ipad photostream. I have over 800 pix in my ipad photostream and imac will only recognize 300 when i have it plugged in to import. Any ideas?

Nevermind, I just spoke with my wife who imported the pictures last night just from that event. She did not delete them after importing either. I guess next time this happens I will uncheck the box that says "Do not import duplicates" to troubleshoot.

My iMac does not recognize my password? What can I do?

My iMac does not recognize my password? What can I do?

If you mean a system password, see this article http://support.apple.com/kb/HT1274

TS2570 iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

iMac does not recognize wifi keyboard and track pad... cursor stays in top left corner under apple ?...

Phillip,
I had this problem recently with a 3-year old Mac Pro intel, which was eventually replaced by Apple due to myriad other problems. When the frozen mouse happened, there was nothing I could do. Very frustrating to have the screen boot and the cursor is up there stuck, on the top left corner of the screen. Frozen. I called support several times. They were amazed. At one point they had me buy a cheap USB mouse (I was using a wireless mouse from Logitech and they thought there might be some kind of conflict). The USB mouse didn't work, either. Neither did an Apple mouse when I went out to buy one.
I ended up driving 70 miles to take the Mac to an Apple Store. I think they reinstalled the (Leopard) system in some secret way, because when the mouse was frozen so was everything else and I couldn't open the disk drive to put the OSX disk in there.
Why I'm here right now is that the same thing happened today with my NEW 3-month-old REPLACEMENT MAC PRO using its brand new wireless mouse, and I was hoping to find some insight. Again, a frozen cursor after the boot. Same top-left corner of the screen. Unlike you, when I click the mouse nothing happens -- no drop down.
Luckily, when I hard-rebooted by holding the button in, the mouse cursor came back. This time. Now I am afraid to turn my computer off. Been there done that before. Anyone have suggestions?
Thanks in advance.

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

I got a iphone 5 but it does not work on my MacBook with Mac OSx 10.5.8 it says i need OSX 10.6.8 but it will not download because I need OSX 10.6 but it would load either. How do I get the older operating system to work with the IPhone5?

You don't. Since you have an Intel Mac, buy a Mac OS X 10.6 DVD from the online Apple Store.
(71894)

IMovie (and iMac) does not recognize device(s)

Hello and thanks for reading. I know this topic is like beating a dead horse but this one is unique. I'm a professional editor and I couldn't figure this out so any help would be appreciated. Here's the play by play:
I edit using FCP 5.1.4 and have for years. I've had the same set up running for years and do high volume editing.
I have a chain of 4 Lacie drives, all connected by firewire.
At the end of that string, I have my tape player for capturing footage, a Sony GV-HD700, which then goes on to the TVs, DVD players, etc.
Also the end of that string, I also have a disc burner for making DVDs.
So it goes: iMac > Lacie #1 > Lacie #2 > Lacie #3 > Lacie #4 > Sony tape player & DVD burner > TVs, VCRs, etc.
Yesterday, I was in a rush and the DVD burner was going slow so I unplugged it from the end of the string of Lacie drives and plugged it directly into the back of the computer to see if it would burn faster.
It didn't, so I plugged it back into the end of the Lacie string.
At that point, Lacie #4 became unrecognizable to the computer and therefore so was the tape player, which is further down the chain.
When I plugged the tape player high up the chain, into Lacie #3, it still was not recognized.
I plugged the tape player (Sony GV-HD700) directly into the back of the computer...still not recognized.
I took the Sony GV-HD700 into our other editing bay and it was still not recognized.
I pulled out my camera (Sony HDR-FX1000) and plugged it directly into the back of the original computer...recognized just fine.
I plugged Sony HDR-FX1000 camera into the back of Lacie #2...recognized just fine.
I took the Sony HDR-FX1000 camera into our other editing bay...recognized just fine.
I have a big deadline so I said "Screw it." and was just going to capture from the camera for the time being.
I reset the Lacie drive chain, plugged the Camera into the back of Lacie #4 (just like the original setup) and BANG: Lacie #4 and the Sony HDR-FX1000 camera was not recognized.
I plugged the Sony HDR-FX1000 camera directly into the back of the computer...still not recognized.
I took the Sony HDR-FX1000 camera into our other editing bay...still not recognized.
I thought it might be a Final Cut Pro issue so I pulled up iMovie and it does not recognize any device connected to the computer even though I'm looking directly at it plugged in.
The entire iMac has lost the ability to recognize devices that I've used for years. I've now lost the ability to capture footage and I'm running out of time. It's almost as if the devices were getting infected by one of the Lacie drives (I think Lacie #4). Is that even possible? Has anyone ever heard of something like this? I don't know if it's something I need to change on the iMac to recognize them again, or if it's a setting on the device to reset the connection, or if somehow the Lacie drive corrupted the devices and made them unrecognizable to iMacs.
It's very, very weird.
Thanks for your help.
27" iMac (2009)
OS X 10.8.5
Final Cut Pro 5.1.4
Tape player: Sony GV-HD700
Camera: Sony HDR-FX1000
I've had this setup for years so I don't know what type firewire it is.

See:
iOS: Device not recognized in iTunes for Windows

My iMac does not recognize or see an external drive.

Ref.: External USB M-DISC DVD+-RW CD RW Burner Writer Drive For Apple MacBook Air Pro iMac
made by YunSen Tech.
My iMac, Mac (27-inch, Late 2013), I bought in August 2014. Its SN is: C02MT0YWF8J4/OS X Yosemite. Version 10.10.1
Could you please help me with the installation of the reference external drive. Supplier gives instruction for Windows only. When I follow the window instruction on my iMac, the system does not recognize or see the drive. When I use Apple>About this Mac>System Reports>Hardware>USB, I think the following info describes the Drive, is it?:
External:
Product ID: 0x0840
Vendor ID: 0x13fd (Initio Corporation)
Version: 1.14
Serial Number: 313037383530384C31312020
Speed: Up to 480 Mb/sec
Manufacturer: Generic
Location ID: 0x14500000 / 1
Current Available (mA): 500
Current Required (mA): 2
I would greatly appreciate some help.
Thank you in advance.

The problem is NOT the fact that it is a USB 3.0 drive, as USB 3.0 is backwards compatible with USB 2.0. The problem is specific to Toshiba Canvio portable drives. They only work if you use a micro-USB2 cable instead of the included USB 3.0 cable. This problem does NOT affect other USB 3.0 portable drives (Seagate, Western Digital, etc.), and they work fine with USB 3.0 cables.
Once again, you need a micro-USB2 cable for the Toshiba to mount.

How come IMAC does not recognize my Seagate hard drive that I used to use on my PC...I have a lot of documents on this that I need to use

Could you help me, I would like to use my Seagate hard drive that I used on my PC on my IMAC but It does not recognize it and I have a lot of documents I need on this small hard drive....

Please provide more information. Do you mean the drive cannot be seen in Finder or on the Desktop? If it is visible in the Finder sidebar but not the Desktop you just have a setting to correct Finder - Preferences - General Tab and make sure External Disks is checked.

IMac does not recognize 2nd display

I have read about 100 forums concerning this process and I must say that I am lost. I am trying to connect a second display to my iMac but when I go to system preferences/display and click on detect display, nothing happens. The arrangement tab does not appear between the display and color tabs.
My second display is a 19" Sony TFT LCD display with VGA plug. I have a VGA to DVI adapter that I connected a DVI to mini-DVI adapter to. I then plugged the mini-DVI adapter into my iMAC. The iMac screen went blue for about 2 seconds and then returned to the normal desktop screen but my second display did not do anything. I am trying to use this second display to extend my desktop not mirror it.
Can anyone help me out with this problem. Right now I am wondering if:
1. My iMac does not support this second display.
2. My DVI to mini-DVI cable is bad.
3. My install of leopard did not install software needed to add/recognize second display.
I can confirm that the display works; I was recently using on both a PC desktop and laptop.

I have a similar problem but it happened suddenly. I bought the mini-DVI to VGA converter and every thing was working fine. Then the second display just stopped waking up. Now when I hit "Detect Displays" nothing happens. I'm pretty sure that the problem is not the display. I've read elsewhere that these converters are flakey. Maybe I'll have to go back to the store and have them check it out.

IMac does not recognize MacBook Pro over wireless network

Hi,
I have an iMac running MAC OS X version 10.5.7. It is connected to the Internet via an Airport Extreme Base Station. I just bought a 13-in MacBook Pro that runs the same version of MAC OS X. I connect it to the same wireless network. The MacBook Pro recognizes the iMac (there is an icon of the iMac in the Shared Section of the Finder window). The iMac, however, does not recognize the MacBook Pro. If you have come across this problem and have a solution, I would be most grateful for your advice.
Regards,
MTL

I'm having a similar problem with an Intel iMac and a G4 iBook (both running Leopard 10.5.7) since the recent replacement of the iMac's hard drive. Occasionally the iMac will 'see' and allow me to connect to the laptop, but often the connection just drops out, and then I can't find the iBook any more. The iBook, on the other hand, can't detect the iMac at all. I know I have all the settings right - before the HD replacement, everything worked fine in both directions. Interestingly, in the 'WINS' settings in network preferences, the iMac's 'name' bears no relation (just a list of numbers and letters) to the computer's actual name, while the iBook uses the first word of its own name. It's frustrating, as I have to synchronise my work between the two on a daily basis. I can't get them to connect via ethernet cable either.

My iMovie on my 2011 iMac does not recognize video taken on my new iPad, is there a way to resolve this? I would like to take movies on my iPad and make movies in iMovie on my iMac.

My iMovie on my 2011 iMac does not recognized videos taken on my new iPad. Is there a way to correct this, or perhaps I am doing something incorrect. When I connected my iPad to my iMac, iPhoto popped up, but not iMovie.

You have to import the movie into iTunes via iOS file sharing, then drag the movie from the file sharing window in iTunes to the desktop, then you can import the movie into iMovie. Here are the details.
http://support.apple.com/kb/HT4792

Photoshop CS4 does not recognize raw photos taken with newer cameras. Anyone else have this problem?

Photoshop CS4 will not recognize RAW2 photos taken with my new Panasonic Lumix FZ100 camera. This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4. I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera, but it appears that Adobe no longer updates Camera Raw for CS4 or with newer cameras. When I called the Help Desk to find out if there was some kind of patch I could get to make CS4 compatible with my new camera a gentleman in New Delhi informed me that he couldn't even answer my question until I paid $40 since answering questions about CS4 was a "paid service." I hung up in a rage. Does anyone else have this problem and is there a solution?

This camera is listed in Adobe's 6.2 Camera Raw update for Photoshop CS5 but cannot be loaded in CS4.
Adobe does indeed not update obsolete versions of Camera Raw for new camera types.
And guess what: It’s the camera producers who seem to like to change their raws – so how about spreading some of your indignation their way?
I paid a lot of money for CS4 and don't want to buy CS5 just because I bought a new camera
The upgrade is cheaper than buying the full version.
Anyway, you could try the free DNG Converter which should be able to handle everything the most recent version of Camera Raw can handle.
Edit:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh&promoid= HTENC

IMac does not recognize external monitor using Mini Display Port to HDMI

Hello,
I have been trying to get an external monitor (HDTV) set up for use with my iMac using a Mini Display Port to HDMI cable I just got. However, when I connect it to my iMac's mini display port, the imac's screen goes black for about a second, then returns, but it does not detect the external display. The other display is just showing a "no signal" message on the screen.
I have restarted, reset PRAM, connected and disconnected the cable several times, tried changing the resolution on the imac, plugged in/out the other display, and clicked the "detect displays" button using the option key in display preferences, but nothing has worked.
I am using an early 2009 iMac running Mavericks.
I've been using the AirParrot app, but it's horrible for video and a little slow.
Can anyone please help sort the issue here? I feel like ive exhausted everything that I know to do.
Thanks.

I am having the same issue. Hope Apple can fix this soon!!!

My Imac does not recognize a TEAC CDW54E with Mac OS 10.2.8

Similar Messages

Maybe you are looking for