My imac does not turn al the way on the sreen is blank and it beeps

can some one help with my problem with my imac it does not turn on and only beeps

This indicates  problem with RAM.
You have to take the computer to the Apple store to have it checked out.
http://support.apple.com/kb/HT5860?viewlocale=en_US
Best.

Similar Messages

  • My imac does not turn off !

    My imac does not turn off ! Since i bought the imac ( february ) i had this issue
    I have called aplle support and During 2 months nothing changed ! I rebbot, i cleaned the cache i mean this
    Is the way apple slove issue. ? My imac does not turn off ! I have to turn it off by myself ! ( hold the power button )
    Everytime !
    They told me " this is because of the app you are using !" come i have adobe master cs6 and i told them
    It was before i install these apps.
    I would like some help ! And suggestions. I will return my imac and hope to have the new one because
    Since i bought i can not enjoy the Apple product.
    Thank you

    Have you done the safe boot mentioned above?
    Can you click on the apple on the left of the menu bar? Did you try Paul_31's advice to choose force quit to see if there are any applications that are not responding?
    I tend to agree that it may be time to take it to an Apple service center for hands-on attention.
    Apple normally doesn't replace a machine with a new one unless they have been unable to repair an issues(s) after several tries.

  • Imac does not turn off.

    hello,
    I have an imac, running on os x lion. u know how, when you click on shutdown, it shows the white screen. sometimes my imac does not turn off and keep showing it. could you please tell me what i can do to solve this problem.
    thanks

    The safe boot more or less resets system files.
    When it is something in the hardware:
    1.do the Pram and the SMC resets:
    http://support.apple.com/kb/ht1379
    http://support.apple.com/kb/HT3964
    2. shutdown the mac and startup while holding the ALT(option) key: choose the Recovery Disk, from the window choose Disk Utility, select the Lion disk, choose "repair disk".
    When it is not a hardware problem:
    3. List the applications you installed in the last 6 months, also the ones from the Appstore.
    4. List the plugins (extensions) you have in Safari.

  • My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

    My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

    For some reason its firmware seems to have been corrupted. Read:
    About the Firmware Restoration CD (Intel-based Macs)
    iMac (Mid 2007) and later models: About startup tones

  • Why my Iphone 4 sometimes does not turn on the display?

    Why My Iphone 4 sometimes does not turn on the display?

    Did you already try the steps mentioned in this article?
    iOS: Not responding or does not turn on

  • IMac does not turn back on from sleep mode

    Hi all,
    I've having a problem sometimes that my iMac won't turn back on after I put it into a sleep mode. This does not happen everytime. After  the machine does not turn back on, the only workaround is to unplug the power cable and connect it back. Then I'm able to turn on the iMac. After the machine boots up, and I will get the crash report said that the machine does not turn it off properly.
    I tried to reset the SMC before and it did not resolve the problem.
    Any idea?

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Ipod touch does not turn on the screen shows USB cable and ask to connect to the itune, itune message pops up can not connect because it is locked with pass code how can i turn on this device?

    My son's ipod touch 3 screen shows a USB cable image and ask to connect to the itune. Itune does not connect with the message shows: this device is locked and can not be connected to the itune before you unlock it" I have no idea how to turn on this device and how to connect this to the itune, any help is highly appreciated.

    Try to get it to recognize it by using DFU Mode. Then restore.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • When I turn my phone the picture does not turn with the phone.

    When I turn my phone the picture or the screen on the phone does not turn.

    Possibly you have rotation lock on. Open Control Center (on the home screen swipe up with one finger from below the bottom of the screen up onto the screen). Rotation lock is the icon with a lock at the far right of the top row. That symbol will also appear near the battery status at the right of the status bar if it is locked. Also note that not all apps support rotation.

  • I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

    I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
                                                                                                                                                     Thanks

    Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace.  Since you say iPhone 4, was this a used or refurbished iPhone? 

  • "Add New Tab" button does not exist in the Window -Customize Toolbar, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?

    I see "Add New Window" but..."Add New Tab" button does not exist in the Window -Customize Toolbar any longer, and not on my Navigator toolbar. Where can I find one to put on my Navigator toolbar, please?
    Thanks

    It's the "+" on the Tab bar. You can move it to the Navigation Toolbar if you prefer. When you start Customize, the + moves to the far right end of the Tab bar. You can drag it where you want (see attached image).
    Any luck?

  • IMac does not carry on the system.

    Hi All.
    I am having a very strange situation with my iMac (IOS updated).
    When I woke it from sleep, could not type the password on the box. I forced it to turn off (held the button in the back). Next time I turned the machie on, the opening sound was OK, the apple was there at the center of the white screen, and the spinning wheel was rolling.  Normally the spinning wheel rolls for some moments, the the box for the password appears and we go on.  This time, the spinning wheel keeps rolling for some 3-5 minutes, them the apple in the center of the screen is replaced by the symbol of a circle crossed by a straight line from right-botton up to left-up, somethig like a traffic sign for a forbidden way.  And the system does not carry on.
    Does any one know a process to pss it and carry on the system?
    Best,
    Sergio

    Aqua, i still need help.  The system came from Apple repair with OSX version 10.6.8 (I had Lion on it) and I am trying to recover my time machine backup, but the HD is not accepting to be the destiny of the recovery.  Probably something is avoiding it but I can't find.  Do you know how to do it?

  • My 27" iMac does not turn back on.  No sound, no nothing.

    I shut down my MAC and unplugged it. When I plugged it back in, it would not turn on. I was having problems ejecting a disk and my final solution was shutting down completely.

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • My iMac does not move beyond the white screen with apple logo?

    When the iMac turns on it does not advance it's start up beyond the 'White Screen' with the apple logo at the center.

    the following article addresses the mac booting to gray screen issue you described:
    http://support.apple.com/kb/TS2570
    you should get resolution from this, good luck!

  • My Toshiba TV 40TL933 does not turn with the command

    Hi
    I have a Toshiba 40TL933 TV and the remote turn on the LED changes from red to green but the screen goes black, no load. It has happened three times since I bought it and only a month ago.
    The current disconnect and re-plug in and then it works correctly. Do you think it may be by the software, which would have to upgrade?
    Thank you very much

    I have the same problem, today my tv did not start, led was green and i had to unplug it. After unplug it worked but i'm afriaid that some day will not start at all.
    I really hope that a future firmware version will solve this if it's a firmware problem.
    @Toshiba: if u're reading this please do what's best for your customes because it is in your best intrest.

  • Selecting photo then clicking "Fit" does NOT turn off the Ken Burns effect.

    Trying to wean from iMovieHD.  I'm having trouble mastering what seems to be more limited Ken Burns effect functionality in iMovie11.   I don't seem to have the range, say, left-to-right, as I did in either iPhoto or in iMovie HD.
    So, I figured for now I'd turn off the Ken Burns effect on all the stills in this project.  I've tried selecting one photo, getting into the Fit/Crop/KB effect viewer, then clicking Fit, then Done.  But the photo keeps the KB effect that had been applied to it.
    I tried changing all photos in Preferences and that didn't change anything either. 
    Hopefully I'm just missing something?  Thanks for any help, everybody...

    Nevermind.  Got it.  As I'd hoped, user error.

Maybe you are looking for

  • HP Officejet Pro 8600 Plus Wireless/W​ired Network Sleep Problems

    Okay, it's taken me a while to figure out exactly what causes this problem, but now I have, I'm no closer to resolving it. My setup is as follows: Printer connected wirelessly to my Internet switch with a strong wireless signal. The PCs I print from

  • Closed lid still allows movement

    Hi, is it normal that the screen of my new macbook can be moved a bit to the side (left and right) when closed. I'm talking about only a milimeter and guess it's because it's magnetically locked and not mechanically. But I was just wondering if that

  • Weblogic SAML2 Custom Credential Name Mapper Problem

    HI All I Have configured both the Identity Provider and SP in the same machine but in the different domains. It is working without any issues when it is configured with default Credential Name mapper . Since I was in need to add custom attributes in

  • How to retrieve xml file from BLOB and display on browser with css/xslt

    Hi All, I am new to xml. I am storing my xml file into BLOB in database. Now in my jsp page I want to retrieve this xml file from BLOB and display in HTML/CSS/XSLT form... Pl. guide me.. any docs..?? Logic...?? Thanks in Advance. Sandeep Oza

  • BPM real time scenarios

    Hi, I need to know when actually bpm is uesd and what are the real time scenarios