My iMac doesn't detect HP sj5530 photosmart scanner

I've just purchased a new (old) scanner for scanning photos, HP photosmart SJ5530
I've installed the HP software but i can't add it in system prefs, printer/scanners? it shows in the system info.. but thats it?
Mavericks 10.9.3
am i doing something wrong iris it no longer supported?
thanks for replies (hopefully)

You may have better luck using the pre installed Image Capture app in your Applications folder. No need to add the scanner to System Preferences > Printers & Scanners.
Launch Image Capture located in your Applications folder.
Connect the scanner to your Mac whether Wi-Fi or USB.
Click the very small black box bottom left side of the Image Capture window.
You'll see this pop up menu: Connecting this (device) opens:
You can select a default app to scan (Image Capture) and select a folder from the Import To pop up menu on the right to save scanned files to.
If you need help with the Image Capture software, click Help from the Image Capture menu bar.
Or here > Mac Basics: Using a scanner

Similar Messages

IMac doesn't detect the keyboard

Hi,
I just replaced the batteries of my blootooth keyboard, it powers up just fine (I have also tried it with another mac) but my iMac doesn't detect it - so I cannot log in. Can anyone help me? I have tried to turn iMac off and unplug all cords but it doesn't help.

Hi, plug into your computer any USB k/b - Login, go to System Preferences -> Bluetooth -> hilite your BT k/b & Mouse -> Use the (-)sign at the bottom of the open window to delete items..
Restart your computer -> Repair Permissions & then set up your BT k/b & mouse...L

My iphoto program on my Imac doesn't detect my iphone 4s

my iphoto program on my Imac doesn't detect my iphone 4s

Open iPhoto, Preferences, General, select dropdown list Connected camera opens: iPhoto

IMac doesn't detect the base station correctly (with new base station)

I have a brand new Airport Express. I'm trying to connect to my iMac G5. Everything works fine in the start up with getting the green light on the Express base station. But, my iMac doesn't "connect" with the base station.
I try the "Airport Setup Assistant" and get a window that says "No new Airport networks were found."
I look at the "pie" at the top of the iMac screen. It has the white and black stripes on it. I click it and find "Apple Network e3fec9" and select it. The signal level shown has all blue buttons. That window also reports "Status: Connected to 'Apple Network e3fec9'" and "Base Station ID:00:19:E3:E3:FE:C9". That's what makes me think that my problem must be in the iMac and not the base station.
I had also tried my Dell laptop (from work) and found that it found the internet network. It detected the "local host" and "Apple Network" and the signal strength was very good (~90% or so). The only problem was that the laptop thought it needed to recreate an IP address before it could connect to the internet. I didn't do that, since I saw it was detecting the network.
Please help. Why should this be so hard?
iMac Mac OS X (10.4.9) none

I'm confused. You say you're connected to "Apple Network e3fec9", and you're having trouble connecting your iMac? It sounds like you've managed to connect to your Airport Base Station.
Have you configured the Internet settings for the base station? Try this:
1. Launch Airport Admin Utility (in /Applications/Utilities/) select "Apple Network e3fec9" and click Configure.
2. Under the Airport tab, give the base station a name, click the Base Station Options… button, and make sure Enable Ethernet Port is checked.
3. Select Create a Wireless Network (Home Router) if it isn't already selected, give your network a name, and check Create a closed network
4.Click the Wireless Security button and set it to WPA Personal, and enter a password.
5. Under the Internet tab, set Connect Using: to Ethernet, and in the Configure dropdown, select Using DHCP
6. Click the Access Control tab and click the plus button on the right side of the window. In the panel that pops up, click the This Computer button.
7. Click Update
I'm hoping it's something simple, like Enable Ethernet Port wasn't checked or something, and not something more serious.
Hope it helps.
Rob
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)

IMac Doesn't Detect Headphones

I have a ~year old 24" iMac (2.8 GHz Core 2 Duo) that I just suddenly started having a problem with. I use headphones pretty regularly and they are almost always plugged into the headphone jack. Recently, I lent my headphones to someone and, when I plugged them back in, the machine doesn't detect them. The audio works just fine coming out of the internal speakers, it's just that it always comes out of the internal speakers, no matter if the headphones are plugged in or not (the headphones also work fine when plugged in somewhere else). I took a look at the Sound Preferences panel and, sure enough, it doesn't detect the headphones as plugged in. Does anyone have any suggestions on troubleshooting?
I'm not sure it matters, but I did just recently upgraded to 10.5.6. The headphones worked after the upgrade, but it may be that this is the first time they were replugged in after the upgrade.

It sounds like the head phone jack has been damaged. If they were connected to a port they weren't meant for, that can happen. And that in turn, can damage your audio output port.
Try disconnecting everything but the keyboard and mouse and reboot the iMac. See if that makes a difference.
Resetting the SMC only provides this kind of support:
-Telling the computer when to turn on, turn off, sleep, wake, idle, and so forth.
-Handling system resets from various commands.
-Controlling the fans. so I doubt it can fix the audio issue.
Check the headphone port really close, make sure there isn't any dust or link or anything that might keep the jack from connecting properly.
Carolyn

Help, 27" iMac won't detect Epson projector

Hello,
I'm trying to connect a 27" to Epson projector via Mini Display to VGA adapter connected through VGA cable to the projector (that works fine with other pc)...the iMac doesn't detect it....
Thanks

This has been a big pain. I got the machine back, started it at the shop and it "seemed" ok. When I got it home, after 30 minutes or so, the same problems came back. Another call to applecare, and a new case number was issued to replace the hard drive. New HD in, got the machine home, and the mouse wouldn't work! I could move the cursor, but not select anything. Sometimes during the restarts I could select things, the next time I couldn't, sometimes I could on one user account and not on another. New call to applecare, new case number, many things tried, but ended up re-installing the OS. So far it seems to work okay, BUT there is something weird going on with Mail.
As soon as it is started it basically consumes all the system memory. I can watch the available memory disappear in activity monitor where it says Mail is using nearly 100% of the CPU. If I go in to preferences-advanced in Mail and disable the account, it stops eating up resources.
Any clues to what is going on??
thanks
Message was edited by: Scott Fairbairn

My iMac 20"/Intel C2D 2.4 Doesn't Detect my Sanyo Xacti FH1A.

My iMac 20"/Intel C2D 2.4 Doesn't Detect my *_+Sanyo Xacti FH1A+_* (1920x1080 60p/60i/MPEG-4 AVC/H.264) Camcorder.
I followed exactly my Xacti manual, but nothing happens.
From Mini USB (Xacti Camcoder) to USB (iMac)...nothing!
After connecting the USB, In my Camcoder's screen, it says, *"Hard disk is not Connected."* & *"Disconnect USB converter cable if not using XACTI Library."*
Is this an Apple issue or a Sanyo issue?
Thanks!
Frank S.
SHOCKPROOFX.COM™ ESA
Message was edited by: SHOCKPROOF

Hi, first thing I would do is try connecting the Sanyo to another Mac.
On your Mac try going the SMC route:- http://macosx.com/forums/howto-faqs/302002-reset-system-management-controller-sm c.html
Try another connecting cable - Look on the FAQ (Sanyo Site)->http://sanyo.com/xacti/english/products/vpc_fh1a/index.html..........L
Message was edited by: elmac

IMac won't detect SD card

My iMac won't detect any SD card's. It doesn't seem to matter the size (2GB-16GB) or brand, it is just like I haven't inserted one. I have never used one with it before so it isn't from failing to "safetly remove hardware" and I have tried cleaning the slot (with air can)

Have you checked to see if the SD card reader is listed in system profiler? (apple menu, about this mac, more info button) it should be listed under Hardware, under USB, it would be labeled some thing like "Internal Memory Card Reader".
If the card reader isn't listed:
Have you tried a NVRAM Reset?
Have you tried a SMC Reset?
If the card reader is listed, but your not seeing the inserted cards:
Have you checked to see if the cards are reconised in Disk Utility? (go to the dock, click on finder, go to the menu bar, click on the go menu, chose Utilties, double click on disk utility) Do you see the sd card listed?

My mid-2010 10.8.2 iMac won't detect external displays.

My mid-2010 10.8.2 iMac won't detect external displays. I've tried using a third-party minidisplay port to DVI adapter, as well as an Apple-brand minidisplay port to VGA adapter. The monitor I'm using is a Dell SP2008WFPt. It is a functional monitor. I've tried resetting the PRAM, repairing my disk permissions, rebooting, and doing all sorts of wacky stuff with the order I plug things in. Is there a solution? It seems like lots of folks are having the same problem.
Thanks! This is really starting to make me angry.

If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

IMac doesn't recognize input devices after going to asleep, must reboot

Quite often, my iMac doesn't respond when I attempt to "wake" it using keyboard or mouse. The only way to wake the iMac is to tap the power button. However, when it wakes the mouse cursor is a spinning color wheel and the system does not recognize any input from the keyboard or mouse. I can leave it sitting for quite some time and it still will not recognize my input devices. When this happens I must hold the power button to reboot.
This has been happening for a quite a while now, and it is highly annoying. I can't remember if this was happening before my screen was replaced by Apple a few months ago. It definitely did not happen before upgrading to Lion.
I am hoping you guys can help, otherwise I suppose I will be calling Apple and see if they can figure it out. I am tired of this!
Thanks,
Robyn

I'm having a similar issue. I put my screen to sleep before I go to bed, next day, the computer is frozen, but still on since I can detect heat from the top vent.
I've checked memory for any errors (5 hours of testing) and removed any system extensions. Still gets frozen.
I did attach an old USB mouse just to wake it up when it loses connection to the wirless bluetooth devices. I've been able to wake it up from this condition a few times.
I will keep investigating. My iMac is 1 month old, 27" i5 quad core.

IMac doesn't take dvd's

Hello everybody,
my iMac (Intel, OS X 10.6.8) doesn't detect dvd's anymore. I can hear the disc spinning but after a while it will be rejected. It's the same with original dvd's and copies. What's wrong? I'd really appreciate any kind of help. Thanks already!
Eva

Apple has an article regarding troubleshooting this issue:
Apple Computers: Troubleshooting the slot-loading SuperDrive
It basically involves resetting the SMC. Beyond that, you'll probably want to get the computer in for service.

My imac does not detect my iphone

I just baught imac and i was successfull in syncing my Ipad. with the same cable i have tried to sync my iphone 4s but just does not detect my iphone in itunes.
i have tried restarting my Iphone and my imac but just doen not dectect. I have also tried to put the usb port in all the ports but it still doesn not detect.

Try here.   http://support.apple.com/kb/ts1538 < -- for Windows
http://support.apple.com/kb/ts1591    <--- for Mac
Carolyn

My apple tv is registering on my tv - i can see it on my system info screen but the apple tv doesn't show up, as well my imac doesn't seem to let me share - so i don't know whats wrong, why my apple tv isn't working

anybody able to help me with my setup for apple tv. i've followed the directions in the guide and my tv doesn't seem to register in part. it's weird because my tv system info identifies the apple tv but the screen never went black and it doesn't show anything, too, my imac doesn't seem to register the apple tv unit either

I would try connecting it to another tv to see if it works there if it does
then likely your tv can't handle the default resolution and you should lower it on the other tv
if not then you should connect it by usb to the computer and use itunes to restore it's firmware

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

I tried to launch iCloud on iMac. I Changed my e-mail address recently, and iMac doesn't seem to know it. Even worse, it doesn't know any password I've used with Apple ID. Can anyone help me?

I tried to launch iCloud on iMac. I Changed my e-mail address recently, and iMac doesn't seem to know it. Even worse, it doesn't know any password I've used with Apple ID. Can anyone help me?

No, i don't. if i did i would have tried it. do you have to sign up an appled ID for iCloud? If the answer is yes then they should mention that in the set-up instructions.

My iMac doesn't detect HP sj5530 photosmart scanner

Similar Messages

Maybe you are looking for