My imac freezes after 5 minutes of use

my imac freezes after 5 minutes of use, that's including after i reboot.  is there something that i'm not doning because it's freezing on all my programs.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • Photoshop CC 2014 freezes after 20 minutes of use. I can only minimize it. It even crashes sometimes. Trying to get help from Photoshop GPU FAQ but in vain.

    I have formatted my laptop, Reinstalled all my Adobe softwares and still the same problem continues.
    Photoshop sometimes gets stuck in between while working no matter what the file size and dimensions. Its not about lagging. The screen is just stationary and I can't access any of Photoshop's commands for the stationary period of some seconds or a minute. I can only minimize it. Photoshop even crashes at times.
    I have latest wacom drivers installed 5.3.5-5, Bamboo dock installed, and NVIDIA, GT 740M version 347.52. I have verified the problem with Wacom but they say the tablet doesn't have a problem. I have even tried using Intuos 5. When I use the zoom command with mouse the document zooms in and out continuously without any control.
    I tried to get help from Photoshop CS6 GPU FAQ
    but in vain.
    Bamboo Create Medium CTH 670/K0 C
    Windows 8.1 with NVIDIA graphic card and Intel R HD graphic card

    If you have both a Nvidia GPU and Intel GPU on your machine have you disabled the Intel GPU in windows Device manager. Adobe in the GPU FAQ clearly state that you may have Photoshop problems if your running machine configuration has multiple GPU that are  different GPU.  

  • Computer Freezes after 5 minutes or less of uptime

    iMac g5 17" Ambient Light Sensor
    1.8 ghz, 512 mb ram, 160 gb hd
    Computer randomly freezes after 5 minutes or less of uptime, regardless of what it is doing.
    Even freezes during Apple Hardware Test
    Changed memory
    Reset PRAM
    Replaced HD
    Removed CD Drive
    Tested power supply - perfect working condition
    I started in verbose mode and this is what I got. Can anyone help me out with what it is telling me?
    standard timesplicing quantum is 1000 us
    vmpagebootstrap: 124531 free pages
    migtable_maxdispl = 70
    91 prelinked modules
    Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California. All rights reserved.
    using 1310 buffer headers and 1310 cluster IO buffer headers
    AppleKauaiATA shasta-ata features enabled
    DART enabled
    USB caused awake event (EHCI)
    FireWire (OHCI) Apple ID 52 built-in now active, GUID 001124ff feccbeba; max speed s400
    CSRHIDTransitionDriver::probe: -v
    CSRHIDTransitionDriver::start before command
    Security auditing service present
    BSM auditing present
    disabled
    rooting via boot-uuid from /chosen: 219A46D4-EC3D-3CAC-8CCF-FFFF41F7635A
    Waiting on <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResou rceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Got boot device = IOService:/MacRISC4PE/ht@,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sata -root@C/AppleK2SATRoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDriver/ST3160023AS Media/IOApplePartitionScheme/Untitled 3@3
    BSD root: disk0s3, major 14, minor 2
    jnl: replay_journal: from 3501056 to: 7775744 (joffset 0xa701000)
    AppleSMU -- shutdown cause = 3
    AppleSMU::PMU vers = 0x000d006b, SPU vers = 0x26, SDH vers = 0x01,
    CSRHIDTransitionDriver::stop
    ^^ That is where it freezes. Fans start whirring very loudly.
    Any help would be great.
    Thanks in advance!

    UPDATE: now verbose mode tells me this:
    standard timesplicing quantum is 1000 us
    vmpagebootstrap: 124531 free pages
    migtable_maxdispl = 70
    91 prelinked modules
    Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California. All rights reserved.
    using 1310 buffer headers and 1310 cluster IO buffer headers
    AppleKauaiATA shasta-ata features enabled
    DART enabled
    USB caused awake event (EHCI)
    FireWire (OHCI) Apple ID 52 built-in now active, GUID 001124ff feccbeba; max speed s400
    CSRHIDTransitionDriver::probe: -v
    CSRHIDTransitionDriver::start before command
    Security auditing service present
    BSM auditing present
    disabled
    rooting via boot-uuid from /chosen: 219A46D4-EC3D-3CAC-8CCF-FFFF41F7635A
    Waiting on <dict ID="0"><key>IOProviderClass</key><stringID="1">IOResources</string><key>IOResou rceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Got boot device = IOService:/MacRISC4PE/ht@,f2000000/AppleMacRiscHT/pci@3/IOPCI2PCIBridge/k2-sata -root@C/AppleK2SATRoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDriver/ST3160023AS Media/IOApplePartitionScheme/Untitled 3@3
    BSD root: disk0s3, major 14, minor 2
    jnl: replay_journal: from 3501056 to: 7775744 (joffset 0xa701000)
    AppleSMU -- shutdown cause = 2
    AppleSMU::PMU vers = 0x000d006b, SPU vers = 0x26, SDH vers = 0x01,
    Checking disk
    Mounting local filesystems
    Then it freezes and the fans start whirring.

  • Blackberry curve 9360 freezes after 1 minute

    ive rebooted my phone about 20 times now ive left it off all night with the battery out and it still wont work
    i tried to wipe it but after 6 hours it still didnt wipe, it just froze
    after rebooting everything loads like normal then after 1 minute of using and when im not using it it freezes completley but the light is still flashin?
    what do i do?

    1. Try removing the Media Card and rebooting.
    2. Reboot in Safe Mode and in Safe Mode, delete the most recent downloaded third party applications from Options > Device > Applications Management.
    Article ID: KB17877 How to start a BlackBerry smartphone in Safe Mode http://www.blackberry.com/btsc/KB17877
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Updated to Premiere CC 2014 and AE CC 2014 and now have blue lines/blue imprints of windows and crashes after 5 minutes of use or on start up

    iMac - 27 ", late 2012
    Processor  3.4 GHz Intel Core i7
    Memory  32 GB 1600 MHz DDR3
    Graphics  NVIDIA GeForce GTX 680MX 2048 MB
    Software  OS X 10.9.4 (13E28)
    After I updated from CS6 to CC 2014, my screen started to display blue lines and/or a blue imprint of a previously closed window, and Premiere CC 2014 and AE CC 2014 began crashing after about five minutes of use. Also, an error message popped up telling me to update my CUDA driver. I took the iMac into Apple and after updating the CUDA driver in store with an Apple associate, the error message went away. They were concerned about the blue lines, and after 3 days of hardware testing, they determined that the screen was not failing, the hardware was in great shape and the lines and crashing must be a software related issue. I took the computer home, uninstalled and reinstalled AE using the appropriate installer, and rebooted. Then I uninstalled and reinstalled Premiere using the Premiere installer and rebooted again. During the second restart a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen. I typed in my password, opened up the Premiere project I'd been working on and immediately, the always dramatic message "A serious issue as occurred..." popped up. I tried opening it again, saved a new recovery copy and started to work on the project. Five minute later it froze up and I had to force quit. This happened two more times, both roughly after five minutes of use....back to square one.
    Obviously, this is seriously hurting my workflow. Any advice you could give would be greatly appreciated!

    ... a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen.
    The apple guys said this wasn't a hardware error? I don't know software errors to save imprints throughout a restart. If I were to live dangerously and assume anything it would be that you got a failing graphics processor.
    Ever tried cloning your boot drive and then doing a complete wipe and re-install of OS and CC?

  • Video downloads freeze after a minute or so

    When I download videos, for example from a site such as Vimeo, or the iPad promo video from the Apple site, the video freezes after a minute or so and will go no further. Any ideas? Is it down to the size of my processor? There doesn't seem to be a problem with viewing stuff on YouTube, or with TV programmes from the BBC.
    I've noticed that downloading stuff other than videos is rather hit and miss anyway - the download speed will suddenly fall and once it's below about 180kb/s it stops altogether- sometimes if I stop the download and start it again straightway it will carry on for a bit longer, but sometimes I have to start again from scratch. I don't know whether this is related to the problem with the videos.
    Any ideas, please?

    HI,
    The iPad video is not available for download from the Apple site. You have to launch iTunes, select iTunes Store in the Source list on the left then type in: *Apple Keynotes* in the search field top right of the iTunes window.
    Vimeo requires that your Java Script be turned on. Go to Safari/Preferences and select the Secuirty tab. Where you see: Web content Make sure the top 3 boxes are checked,.
    Vimeo also requires the most recent version of Flash. If you have Flash installed, first uninstall the old copy then reinstall new.
    Uninstall Flash
    Install Flash
    Then repair disk permissions...
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Your download speeds are determined by the type of internet connection you are using. Broadband/ DSL ... you can check download and upload speeds here. http://www.speedtest.net/
    If you have a broadband connection your download speed should be about 16Mbps
    Carolyn

  • X3 gets freezed after 15 minutes of swithching it ...

    Please help me
    my X3 gets freezed after 15 minutes of swithching it on and its volume key is also not working. i ve tried reinserting battery and sim but nothing improves. plz help immidiately

    try removing the battery and memo card for 5 mins then start up again also check for a software update
    free up your memo by removing unwanted items such as images,videos etc
    also try keep your message folders to a minimum if you have alot of text remove them clear your inbox and sent folders
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • Rented movie but it kept freezing after one minute of play -help please

    Rented a movie on Apple TV but it kept freezing after one minute of play - help please

    Try waiting a few minutes, or longer, to see if the beachball goes away. Start up iTunes, then go do something else for awhile. Perhaps iTunes is going some overdue bookkeeping and once you let it do it it will work again.

  • Hi my girlfriend iphone 5 is switching off himself after few minutes of useing him.i was charged fully..there is the newest softwer plus is after restor to the factory settings...its showing flat battery but was charging full???

    hi my girlfriend iphone 5 is switching off himself after few minutes of useing him.i  charged him full then I install the newest softwer plus is after reset to the factory settings...its showing flat battery but was charging full???and still is switching off after some time.please help

    romifrommidleton wrote:
    Help some ideas thas what we askin all here...thanks anyway
    Do you not understand English? The "idea" we have given you is TO TAKE THE PHONE TO AN APPLE STORE OR AUTHORIZED SERVICE PROVIDER!!!
    If you want to follow the advice is up to you. No one here really cares what you do in the end.

  • 15"Macbook Pro shuts off after 5 minutes when using full-charged battery.

    15"Macbook Pro shuts off after 5 minutes when using full-charged battery.  If not touched, computer stays on.  But start typing, it shuts off.  Was told this was a fan problem.  Had fan replaced last spring.  But problem has begun again.  Is this a battery issue or somethig else?

    Charge Information:
      Charge remaining (mAh):          3747
      Fully charged:          Yes
      Charging:          No
      Full charge capacity (mAh):          3899
      Health Information:
      Cycle count:          90
      Condition:          Good
      Battery Installed:          Yes
      Amperage (mA):          0
      Voltage (mV):          12382
    It says it looks fine....

  • My nano shuts down after one minute of use, why?  Brandnew

    My nano shuts down after one minute of use and it doesn't matter if I'm using the radio or playlist.  This is brand new so I've only ever listened to 1 minute of a song. Help

    Kevin,
    This usually happens when your headphones/earbuds aren't plugged all the way in. Double check the connection of the headphones and make sure the jack is free of debris.
    B-rock

  • TS1362 Purchase a movie, down loaded it. But when I play it back it freezes after 10 minutes.

    Purchase a movie, down loaded it.  But when I play it back it freezes after 10 minutes of playing. What can I do to fix the problem?

    I'd report the problem to the iTunes Store. 
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

  • I installed iCloud yesterday and since my mac book pro is slowing down to almost total freeze after 8 minutes when connected to internet. Anyone knows what to do? Many thanks

    I installed iCloud yesterday and since my mac book pro is slowing down to almost total freeze after 8 minutes when connected to internet. Anyone knows what to do? Many thanks

    Removed trend micro smart crap files from disco and it worked.

  • TS3474 Why does my iPod Nano turn off after one minute of use?

    I just got a new 16 GB iPod Nano and it turns off after one minute of use.  Why does it do this?

    I figured it out.  Headphones were not plugged all the way in.  This support community is awesome.  Thanks everyone.

  • Tecra 9100 freezes after several minutes

    My Tecra9100 (P4, 1,8 Ghz) freezes after several minutes. It shows no reaction on keyboard or mouse input.
    It doesn't matter whether I'm running WinXP, Linux or just enter the BIOS.
    Rebooting the system leads to a shorter period until freezing (several seconds).
    First I thought of overheating of the cpu but a small hardware tool shows me that the temperature is normal and the cooling fan works.
    Any idea? Perhaps a problem with the VGA?

    Hi
    Yes, its perhaps something wrong with VGA but I think it could be a memory fault.
    Try to replace the modules and check if there are some performance improvements.
    If not, the technician should check the notebooks motherboard
    You know; Its always not easy to say what could be wrong without any diagnostic procedures

Maybe you are looking for

  • Unable to Render Video in PSCS4 Extended - Error Messages

    I am unable to render video it seems. Despite having the latest QuickTime Pro in stalled and all updates to Vista 32 bit and to CS4 Design Premium, I get the following error message: "The procedure entry point CFCreateApplicationRepositoryPath could

  • How do I get my apps off my iPhone onto my mac

    I reciently had to replace my HD and now I want to get all my apps off my phone back onto my mac.  If I attempt to sync apps, it tells me all my apps and their data on my phone will be replaced with the apps on my mac (there are not any apps on my ma

  • Parallel processing for ABAP prorams in Process chain.

    Hi All, In one of the process chain, we have added the ABAP program. In Backend,the job is running as "BI_PROCESS_ABAP". I just want to know, same like DTP, can we keep parallel processing for the ABAP programs also. Please suggest. Thanks.

  • Using RCA/Composite video on tube TV - problem

    I bought the Apple DVI to Video Adapter for my old 19" tube TV. The screen resolution was at 8--x--- by default. Everything was working fine for the past few weeks. I opened up iTunes, which then prompted me to enlarge my screen resolution. I enlarge

  • Doubt in restricting table field value

    Hi, I Want to restrict one field in my table to have only predefined values. ie, I have a field named Status which can have only 2 values either 'Present' or 'Absent'. How to make this constraint enforced in the table ? Suggestions & ideas are very m