My imac g5 will not go past apple logo

Two weeks ago it started up perfect with no problems , last night i turn it on , it's pixelated and will not go past the apple logo , i reset the pram, i made sure it was running on the OS , i tried to boot of of disk warrior ,nothing worked. I started it in verbose mode the pixels went away and it got hung up on airport link down in enl . I have a picture of where it got hung up , i will try and post it...okay guess i can't do that. I bought this from a friend who had pre loaded the programs i wanted so i do not have start up discs i have a copy of osx and a copy of tiger (i believe) (original programs) i am not sure what os is running on here, but if it helps its not a newer version and i run garage band 8 on it.

It is hard to give accurate help without knowing exactlly which iMac you have or what OS X it is on.
At this point I can only suggest, starting up from either the OS X or Tiger copies that you have and see if you can Repair your (Macintosh HD) Startup Disk.
If the copies of OS X or Tiger are good, then you should be able to startup from one of them holding the C or Option key, navigate to Disk Utility and Repair your Startup Disk.
Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C or Option key.
When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Click the First Aid tab.
Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
Select your Mac OS X volume.
Click Repair. Disk Utility checks and repairs the disk.
If you can not startup from any of the discs that you have (OS X Tiger or Disk Warrior) to make repairs, then your only choices are to seek help from either your friend or an Authorized Apple Service Provider.

Similar Messages

Imac g5 will not boot past apple logo

Two weeks ago it started up perfect with no problems , last night i turn it on , it's pixelated and will not go past the apple logo , i reset the pram, i made sure it was running on the OS , i tried to boot of of disk warrior ,nothing worked. I started it in verbose mode the pixels went away and it got hung up on airport link down in enl . I have a picture of where it got hung up , i will try and post it...okay guess i can't do that. I bought this from a friend who had pre loaded the programs i wanted so i do not have start up discs i have a copy of osx and a copy of tiger (i believe) (original programs) i am not sure what os is running on here, but if it helps its not a newer version and i run garage band 8 on it.
iMac

How to show us a screen image. Avoid personal identification.
command + shift + 3 Will take entire screen. You hear a click.
command + shift + 4 Lets you decide what to take. Mouse pointer changes. Move mouse to upper left corner of desire image. Hold down left mouse key where to start image. Drag mouse to lower left of where you want to stop image. Release mouse.
You will get a picture n.png file on the desktop.
On the forum input panel you will see the camera icon.
click on camera icon.
another window will appear.
Make sure you have selected the from your computer tab.
click on Browse button
An open file panel appears. Select the file.
After selection a file, I have this screen showing.
You will have to click on Insert Image. You may have to scroll down to see Insert Image button.

Imac will not boot past Apple Logo

My imac will not boot after the good chime and apple logo (i don't even get a spinning wheel). I have held the option key down and selected the OS 10.6 disk with the same result. I was able to erase the drive and reinstall OS 10.6 using target mode and another computer. In target mode I can boot the other computer from the IMac HD but not the IMac. Have also tried holding the shift key and booting into safe mode with the same result. Additional note: I reset the PRAM and the SMU. At first on PRAM reset it would take 45 seconds for the machine to chime again, after OS reinstall and SMU reset, PRAM reset chimes within 10 seconds.... any help would be appreciated...

Kind of late but your solution helped me remember what once worked for me, a few years back.
Started iMAC in Target mode Used a firewire cable to a MacBook Pro
Started the Macbook Pro using the option Key and then restarted with the iMac as the Hard drive
Then I updated to 10.6.8 and allof the other updates.
shut down and rebooted and everything was fine.
But first I did quite a few other things before the update such as
It all started with a DiskWarrior finding overlapped files, I have been around the block a time or two so after it found three overlapped files, I shut down diskwarrior started up disk utility did a restore of the messed up drive to another external drive,
of course this copied overlapped files and all to the new external drive It took 24 huors or so, to back up the drive once it was done, I also tried a few times to correct the overlapped files to no avail,
so then I started the iMac up in target mode used the MacBook to format and erase the original drive, used the 10.6.3 DVD installer to install onto the hard drive, using the macBook DVD. After I was finished with the install to the iMAC,,,,,,,,,,this is where I got the three beeps like bad ram So idid the PRAM and SMC to no avail.
The operating system was evidently not new enough so once I did what i said at the begining of this post all went well.
Sometimes It is tough to remember some of the stuff that you learned several years ago.
and tired hard to forget.
I hoped this post does not scare away to many people, I was just about done with this computer until I read your post, one of several dozen, and it all came back to me.
Thanks a Bunch
I hope this can help others
themacprofessor

Macbook Pro will not boot past apple logo/spinning gear

Earlier this evening I was installing the aperture 3.0.2 and iMovie 8.0.6 updates onto my MBP and the system refused to install the Aperture update so I decided to shut down and restart the mac and when I saw the familiar Apple logo spinning I was distraught to see it would go no further. I then did what ay learned apple user would do and reset the PRAM and let it chime 4 times, just to be safe, and I restarted holding shift - the grey bar finished but it still would not load. I luckily have a Carbon Copy Clone of an old hard drive for this machine before I upgraded (much too outdated to copy back over - I would lose Final Cut Studio 3 and Aperture 3 etc...) which I was successful in booting into (and am using now) to do a disk utility > repair permission and repair disk. Both had no errors and I was sincerely confused. I attempted to boot it once more before I started to freak out. Needless to say I freaked out. I booted in single user mode and ran the checkdisk within that TWICE before typing exit and it did the rest of the verbose boot which then hung on "AirPort: RSN handshake complete on en1" This is the end of what I know to do - so with that I hand it off to you... any help is appreciated a and will definitely be attempted.
-Lucas

The drive had over 350GB available. Yes I suppose I would be able to but I am unable to locate one. If someone is certain a OS replacement install would fix things I am willing to go buy one...

Iphone will not boot past apple logo, reset doesnt work

Hello...
i replaced the the LCD screen on my iphone 3g and all i get when i power it on is the apple logo and a swirling progress bar that doesnt move, this loops every 5 or so minutes but does not progress to the password screen.....
Please anyone..???

Greg,
You can try searching the Internet for a 3rd-party company that will repair iPods and iPhones.
Hardware issues caused by disassembly or unauthorized service are not covered by the iPhones warranty. This webpage: http://www.apple.com/legal/warranty/ provides more details about the iPhones warranty.
You can also find answers to Frequently Asked Questions about iPhone service here: http://apple.com/support/iphone/service/faq/
-Jason

IPad will not load past Apple Logo

My iPad froze, so I rebooted it by holding the home and power button for 10 seconds. Now, it won't even load past the Apple logo. Please help me!

If the reset don't work then I think that you may need to contact Apple

M2nd gen will not boot past apple logo

i also cant get it into recovery or dfu mode.

i got it into dfu mode, restored it, and it just says waiting for ipod for the last 30mins, and the progress bay on the ipod is full.

My iMac will not boot past the logo and spinning gear

My iMac will not boot past the logo and spinning gear (After a Rogue Amoeba update). I can't access the recovery disk I made on a flash drive. (Am I doing it correctly? - Hold down option while switching on? It just stays on the logo). What (if anything) can I do please?

If you installed Lion onto your machine, it should have created a Recovery HD (hidden from view, but visible in Disk Utility with its Debug menu enabled, under Show all Partitions).
That article states:
Note: In order to create an external Lion Recovery using the Lion Recovery Assistant, the Mac must have an existing Recovery HD.
Would I see the recovery menu (by holding down option on power up)
Yes.
if there was no recovery disc connected do you think?
Shouldn't matter, since your int HD is always connected.

HT201263 None of these answers help my problem. My ipad will not leave the Apple logo. I hold both buttons and the screen goes black, then the apple logo immediately pops back up. I can't do anything because the apple logo just keeps popping back on.

I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore

HT1369 my iphone 4 will not turn on apple logo just flashes

my iphone 4 will not turn on apple logo just flashes

Hey laysams64,
I would follow these troubleshooting steps:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
from: iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Welcome to Apple Support Communities!
All the best,
Delgadoh

My ipod touch 4th generation will not leave the apple logo sign

my ipod touch 4th generation will not leave the apple logo sign what do i do to turn it on and work ? please help

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Mid 2007 imac not booting past apple logo, osx lion

Hello, hope someone can help, need to finish an urgent website and after resarting my imac it just hangs at the apple logo. Worked fine this afternoon and when i went to reboot this evening just would'nt have it. Tried all the usual stuff, resetting etc, tried with nothing plugged in, been in safe mode and it fixed various permissions but still no joy.
Any help would be great or think my client might just walk!
Paul

Reboot the iMac and hold the Option (Alt) key on startup, choosing "Recovery HD" as your startup Disk. Once the entry screen comes up choose "Disk Utility", then select your Hard DIsk and click "Repair Disk"

MacBook Pro Will Not Boot Past Apple Loading Screen At All.

I am having a major problem with my MacBook Pro and it just wont boot past the apple loading screen at all
I have tryed al lot of ways to fix this and it just wont work
It does not go into safe mode, it does not boot from cd, the PRAM thing wont work, verbose mode or the comand + s mode wont work
I tryed clean install but it wont boot from dvd, also it will not boot in any other way
It was working perfectly last night and i just shut it down and it does not work know.
My friend was also trying to install Lion from his account but the .dmg for it did not open so we quit and that night i used it for my essay and finished and then i turned it off and next day in the morining it don't work
HELP ME PLEASE

You can take the drive out of the computer, use a $20 IDE/SATA to USB adpater to another Mac
You can see if you can read the drive directly to gain access grab files, run Disk Utility and perhaps it can repair it.
If you can't read the drive then there is DataRescue for a whopping $99 but it will read any deleted (but not scrubbed, encrypted or overwritten) data for recovery. Least that way you can get your files back.
Once your data is off, Zero Erase the whole thing, install 10.6 on it with the other Mac.
When installed in the sick mac, the hardware firmware will read the new EFI firmware, load it and you'll have the boot keys back again ON THE SECOND BOOT, it doesn't load on the first.
https://discussions.apple.com/docs/DOC-3172
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Nano hangs on apple icon when turning on. After several restarts, still will not go past Apple icon. Computer doesn't recognize Nano when plugged in.

I tried to connect iPod Nano this morning to sync Podcasts. Keep getting error that device not found.
Restarted Nano and the screen hangs on the Apple icon & doesn't progress.
I restarted one time and looks like I got into a diagnostics program.
Tried to restart while plugged into computer, still doesn't go past Apple icon.
Any idea on how to get Nano to come up fully and connect to computer via iTunes?

Restore the phone from Recovery Mode as described here: http://support.apple.com/kb/HT1808

2011 21.5" iMac not booting past Apple logo

A friend of mine has had a 21.5" iMac since last fall. It's a 2011 model, which came with Snow Leopard preinstalled; however, as he was eligible for the free upgrade to Lion, I took care of that from him (basically, he's been running 10.7 since day one). It's been working well ever since, and I successfully managed to install Mountain Lion on the machine just a few weeks ago.
Just a few hours ago, Mail started acting up on his machine and I tried to help him. The symptoms, if they're at all relevant, were that a new message composition window wouldn't close if he clicked the "close window" button, and the send button was greyed out. I recommended a restart.
Here's where things got really interesting. The computer froze on the Apple logo. That is to say, initially, after the startup chime, the Apple logo showed up with a spinner; after three or four minutes (already abnormally long), the spinner vanished, but the Apple logo stayed. We left it like that for about a half hour, to no effect. I restarted a few times using the I/O button on the back of the machine, trying to eject any CDs using the "click on restart" trick, holding down the shift key to get into safe mode (with limited success: a loading bar appeared, then nothing happened for 20 minutes, at which point I restarted again) and to zap the PRAM, to no effect. I can't hear the hard drive's head clicking back and forth, as it usually does in my iMac, and tried booting from the recovery CD. Strangely enough, the CD drive spins up, then back down almost immediately, and we're back to square one, with an Apple logo in the middle of the screen.
At this point I'm completely puzzled; I've browed fora and message boards, and so far, nothing I've tried seems to work. My friend is reluctant to go to the Apple store, as he thinks that he'll lose all of his data that way (even though he's got a backup disk set up, with backups from just before the restart, going back about a month). Fact is, I'm not sure that there is a solution at this point, beyond taking the machine, which is still under warranty, to an Apple store.
What would be a good course of action at this point?

I tried starting up in safe mode. The loading bar showed up, filled up, and disappeared, and then, nothing. Just the Apple logo, for at least 20 minutes (I later restarted and tried zapping the PRAM, also without success).

My imac g5 will not go past apple logo

Similar Messages

Maybe you are looking for