My iMac has extra numbers added to its share name. e.g Ali's iMac 49886

I am using Mountain lion, and my computer name keeps changing.
It keeps saying that it is because the name is already in use on the network, but that is not the case.
I use an airport extreme base station.
I am only sing the Ethernet port to connect to the network and wifi turned off.
How do I stop these numbers from adding to the computer name.
Ali

Here is just a sugestion, maybe the airport Extreme thinks that your computer is actually connected twice and hasnt let go of the lease of the IP address. On the old version of Airport Utility you could view attached devices the new one doesnt let you do this but here is a link to the old version.
http://forums.macrumors.com/showthread.php?t=1343156
Linc Davis is right, the user accounts have nothing to do with your machine being names twice. I personally think that your name is just stuck somewhere on the network and the boxes all need flushing.
To do this just simply go round and switch everything off and switch it all back on again and the leases should be renewed.
This sometimes happens when you move from AP to AP.
Thank you
JC

Similar Messages

  • How to find out how many hours an iMac has been running!

    Is there a way to find out how many hours an iMac has been running? I am thinking of buying a second hand iMac 20' or 21.5' as for space reasons, the actual 27' versions are too big. And of course, all adverts state "hardly never used"!!

    Hi, I think in later OSes I've seen total Machine hours in System Report or such, but on 10.4.11 right know.
    Hard Drive ON hours might be helpfull using Smart Utility...
    http://www.volitans-software.com/smart_utility.php

  • How to get the alias name of an attribute of a VO from its column name?

    How can I programmatically get the alias name of an attribute of a VO given its column name?
    Often alias and column names are not same when the VO is created (and I don't require them to be the same)

    Hello John.
    I will be more precise. When the VO based on a table comes out from the wizard, it produces xml entries like the following one:
      <ViewAttribute
        Name="ColumnName"
        AliasName="COLUMN_NAME"/>There the column of the table on the DB really is COLUMN_NAME. The wizard mangles that name producing ColumnName as Name property.
    This is ok. I don't want to change this default behaviour.
    What I need is to programmatically get the value of that attribute given its AliasName property value:
    String f(ViewObject vo, String AliasName) {
    return (String)vo.getCurrentRow().getAttributeFromAliasName(aliasName); // getAttributeFromAliasName does not exist
    // instead of return (String)vo.getCurrentRow().getAttribute(Name);
    That is, usually getAttribute expects what in the xml is the Name property. However, I want a sort of getAttribute() expecting the AliasName.
    I hope it's clear.

  • Since I upgraded to Yosemite I see "iMac" followed by a long number under "Shared" in the navigatie column of Finder. Every day a new item is added with the same number, but followed by (1), (2) etc. My iMac has gotten very slooooow.

    Since I upgrade my iMac to Yosemite I see "iMac" followed by a long number under "Shared" in the navigatie column of the Finder. Every day a new item is added with the same name and number, but followed by (1), (2) etc.
    I use Time Machine.

    I suffered with numbers next to my unit's name in Shared Devices, Finder Pane.
    What I did was turned off my Time Capsule and whilst it was off I renamed my Macbook Pro in System Preferences / Shared.
    I turned on the Time Capsule and thus far, 12 hours later the change has stuck.
    There are many people suffering this bug, it's to do with ghosting on your network... Where your current machine see's itself as a ghost, hence you get a numbered mac...???

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

    My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

    One of the memory cards was indeed faulty, and the other completely fine
    Thanks very much for all your help!
    Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from  system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
    However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
    Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

  • The display on my 4 year old iMac has horizontal lines and gradations of gray. Is my machine on its way out? Can I fix the screen?

    My four year old iMac has developed horizontal lines and gradations of gray over the last month. Is my machine on its way out? Is there anyway to fix the display?

    If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing.
    Genius Bar Reservation

  • My 27" iMac has just creen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB keyboard

    My 27" iMac has just come back from the workshop after having a white screen issue repaired. I restored from my time machine and now the white screen is back and I am unable to access an recovery option. It looks like its no responding to the USB ke

    Thanks for your reply! I must apologise for the quality of my post. I inadvertently posted it before it was corrected.
    I am very disappointed with this iMac. It is only 18 months old and this will be the third visit to the workshop. I had expected more from Apple and from their repair agents. Luckily I have AppleCare.

  • How do i find how much free space my iMac has? Its running MAC OS v10.6.8

    I can't see anywhere where I can find out how much free soace my iMac has, any help much appreciated!

    Welcome to Apple Support Communities
    You have different ways to do it. First, you can use Disk Utility (it's in /Applications/Utilities). Open that application, choose "Macintosh HD" in the sidebar and free space will show up at the bottom of that window.
    If you have Lion or Mountain Lion, open  > About this Mac > More Info > Storage.
    Another way is using Finder. First, open a Finder window, select Finder menu (on the menu bar) > Preferences > General, and mark "Hard disks". Then, Macintosh HD will appear in the desktop, so choose it and press the Space key

  • My iMac has been acting sluggishly; taking unusually long to recover from sleep mode as well as it arbitrarily opening an app on its own. What is going on and can it be corrected?

    My iMac has begun to act suggishly and unpredictably lately. It takes unusually long for it to wake from sleep mode and often opens with a particular app (PSE) for no reason. What is going on? Is there a clean-up procedure(s) in addition to clearing history & cookies or perhaps a upgrade I missed?

    Hardware Information:
              iMac (21.5-inch, Mid 2010)
              iMac - model: iMac11,2
              1 3.6 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              ATI Radeon HD 5670 - VRAM: 512 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 6:4:21
    Disk Information:
              ST31000528AS disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) / [Startup]: 999.35 GB (915.2 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              OPTIARC DVD RW AD-5680H 
    USB Information:
              Apple Internal Memory Card Reader
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Built-in iSight
              Apple Computer, Inc. IR Receiver
    FireWire Information:
              LaCie d2 quadra (button) 800mbit - 800mbit max
                        disk1s1 (disk1s1) <not mounted>: 32 KB
                        time machine backup (disk1s3) /Volumes/time machine backup: 1 TB (696.27 GB free)
    Thunderbolt Information:
    Kernel Extensions:
              com.avira.kext.FileAccessControl          (1.0.0d1 - SDK 10.8)
    Launch Daemons:
              [System] com.adobe.fpsaud.plist 3rd-Party support link
              [System] com.avira.antivirus.dbcleaner.plist 3rd-Party support link
              [System] com.avira.antivirus.ipm.loader.plist 3rd-Party support link
              [System] com.avira.helper.watchdox.plist 3rd-Party support link
    Launch Agents:
              [System] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [System] com.avira.antivirus.ipm.ui.plist 3rd-Party support link
              [System] com.avira.antivirus.odscan.default.plist 3rd-Party support link
              [System] com.avira.antivirus.scheduler.agent.plist 3rd-Party support link
              [System] com.avira.antivirus.systray.plist 3rd-Party support link
              [System] com.avira.antivirus.update.default.plist 3rd-Party support link
              [System] net.culater.SIMBL.Agent.plist 3rd-Party support link
    User Launch Agents:
              [not loaded] com.adobe.AAM.Updater-1.0.plist 3rd-Party support link
              [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
              [not loaded] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    User Login Items:
              iTunesHelper
    Internet Plug-ins:
              JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Outdated! Update
              FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
              Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
              OVSHelper: Version: 1.0 3rd-Party support link
              QuickTime Plugin: Version: 7.7.3
              Silverlight: Version: 4.1.10329.0 3rd-Party support link
              iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions:
              DivX Plus Web Player HTML5 <video>: Version: 2.1.2.126
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
              Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes:
              DivX  3rd-Party support link
              Flash Player  3rd-Party support link
    Old Applications:
              TomTomHOMERunner:          Version: 2.9.5.1974 - SDK 10.4 3rd-Party support link
                        /Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 930.71 GB Disk used: 78.36 GB
              Destinations:
                        \ [Local] (Last used)
                        Total size: 931.39 GB
                        Total number of backups: 182
                        Oldest backup: 2010-12-08 22:28:38 +0000
                        Last backup: 2014-02-26 19:40:36 +0000
                        Size of backup disk: Adequate
                                  Backup size 931.39 GB > (Disk used 78.36 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   1%          WindowServer
                   1%          EtreCheck
                   1%          savapi
                   1%          Perfect Diet Tracker
                   1%          eprocsd
    Top Processes by Memory:
              287 MB          savapi
              258 MB          avguard.bin
              119 MB          softwareupdated
              98 MB          com.apple.WebKit.WebContent
              78 MB          Finder
    Virtual Memory Information:
              94 MB          Free RAM
              1.70 GB          Active RAM
              1.67 GB          Inactive RAM
              546 MB          Wired RAM
              1.26 GB          Page-ins
              0 B          Page-outs

  • IMac has suddenly become very slow doing everything?

    My iMac has suddenly become very slow -at present it is useless and will have to take to apple unless you can help.?

    First, make sure you have adequate backups. If your hard disk is failing this could be a sign. It can be replaced if necessary, but a backup strategy is recommended whether or not you are experiencing problems.
    Read: OS X Mountain Lion: If your Mac runs slowly. It applies to Lion as well. The article is very cursory, but be sure to read through to the end. Unfortunately the link there is broken, so use this one: Disk Utility. To do this you must start your Mac from the Recovery System or Internet Recovery.
    Rather than ask a dozen questions for more details about your system consider the following. You must be running either Lion or Mountain Lion. Including your version of OS X in your system description would help.
    Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
    http://www.etresoft.com/etrecheck
    Etrecheck will take a moment to run as it collects its data.
    Copy and paste its output in a reply. Do not be concerned about anything that says "Problem" or "failed".
    EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
    When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.

  • My iMac wouldn't turn on. This has happened out of nowhere, it was working really well before.  checked my power cord and outlets everything's fine.  The iMac has no power at all. no sound or anything, completely dead.  It is only 1 year and 2 mos old.

    My iMac wouldn't turn on. This has happened out of nowhere, it was working really well before.  checked my power cord and outlets everything's fine.  The iMac has no power at all. no sound or anything, completely dead.  It is only 1 year and 2 mos old. Any idea what it could be?

    I have purposely been ignoring your responses to my posts about the heat issues in the newer design iMacs, but if you want really want to ague the point...
    First, the iMac is marketed as a desktop model Mac. Not a laptop or MacBook.
    I have never owned a MacBook, so I can't attest to how much heat the MacBooks generate.
    I Have two iMac models. A 2009, 27 inch screen iMac for myself. And a 2010, 21.5 inch screen iMac for my Fiancée.
    As a desktop Mac these are hottest running desktop Macs I have ever owned. Period. I owned two beige Macs, a pre-G3 tower, aG3 desktop, a G4 MDD Tower, the original iMac, eMac, iMac G4 and now my current iMacs.
    None of my previous Macs have ever, EVER ran this hot. I have never, also, had any component failures in any of the previous Macs I have owned, either. All of my Macs have been upgraded or modded to some degree over the years.  About 2 years ago I had to press my old G3 back into service. Both my G3 and G4 models have been heavily modded. The G3 ran without issue for a close friend for over a year until that friend went out a got a Mac Mini.
    That's a 1996-97 Mac my friend. And it still is in working order and hasn't had any failures.
    The fact I am pointing out here is that heat is an enemy to electronic components.
    Whether desktop iMac or MacBooks, tightly packed enclosures of heat generating computer components with fans that do not run fast enough at most times to cool off the interior or exterior, will and does slow roast computer components to premature failure.
    I do not know how frequent component failure is in the MacBook line up. So I can't attest to those.
    I do not participate in those forums.
    This is why at some point in computer history, Super Conputers were liquid cooled. PowerMac G5 systems were liquid cooled because they ran too hot!
    I have taken my own precautions to keep my iMacs' heat down as much as possible.
    I don't  have the money to keep buying a new Mac every 3-5 years when some catastrophic failure happens.
    I had to purchase my iMacs used as I couldn't afford the cost of a new iMac with the specs I needed.
    My idea, your idea and Apple's idea of acceptable operating temps we can argue all day long.
    I feel, personally, that the operating temps are too high and exacerbate operational issues.
    I Have been participating in these particular iMac forums for just over a year and have seen plenty of posts of iMac component failures due to both heat and dust, dirt issues from within the iMac.
    There can be no other reason for all of these failures. The SuperDrive is, usually, the first to go bad.
    It's probably due more to its vertical mounting, but the excessive interior heat isn't helping it.
    Next to fail is the GPU. The last to fail, but the most expensive to fix, the Logic Board.
    I Have seen plenty of posts in my last year here of all of these failures in iMac less than 5 years old and ,perhaps, a little older. 2008 model iMacs seem to have their issues, too!
    Apple is focusing too much on design and aesthetics, rather than longevity of their products, I feel now.
    A Mac isn't going to last 7- 10 years anymore.
    I don't have stats and numbers. Just common sense.
    This is my story and I am sticking to it. For what it's worth.

  • IMac has become slow and freezes up

    For a few months now my iMac has been much slower than it used to be. Apps take longer to open, menu functions respond more slowly, folders and files take longer to open, pages longer to display, etc. Frequently the active window freezes and the colour wheel starts spinning for 10-15 seconds (it has been doing it twice since I started writing this sentence). This happens with all apps I am using, like Safari, Mail, Word and Excel, but particularly frequently in Logic Pro X. Sometimes when it happens (but not always), I get the error message "Disk too slow or system overload (-10010)". However, I upgraded to Logic Pro X about a year ago, and I never had this problem during the first number of months after the upgrade. I am aware that Logic uses a lot of CPU and memory, but, as mentioned, I also have the problem when Logic is not running. This leads me to think there might be something with the hard disk, although it beats me why it suddenly should have become slow. I am currently running everything from the built-in 1 TB hard disk. I have a 3.1 GHz Intel Core i5 CPU and 8 GB RAM. A full EtreCheck report with my system specifics is enclosed below. Can anyone help?
    EtreCheck version: 2.0.3 (88)
    Report generated 13. oktober 2014 20:02:21 CEST
    Hardware Information: ℹ️
      iMac (27-inch, Mid 2011) (Verified)
      iMac - model: iMac12,2
      1 3.1 GHz Intel Core i5 CPU: 4-core
      8 GB RAM Upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      AMD Radeon HD 6970M - VRAM: 1024 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.9.5 (13F34) - Uptime: 3 days 11:48:59
    Disk Information: ℹ️
      ST31000528AS disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (511.48 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      HL-DT-STDVDRW  GA32N 
      SAMSUNG MZ7TE512HMHP-00000 disk1 : (512,11 GB)
      S.M.A.R.T. Status: Verified
      LaCie (disk1s1) /Volumes/LaCie : 409.69 GB (409.15 GB free)
      LACIE SHARE (disk1s2) <not mounted> : 102.42 GB
    USB Information: ℹ️
      Line 6 GX
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
      Apple Internal Memory Card Reader
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
      LaCie Rugged THB USB3
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Extensions
      [loaded] com.line6.driver.xtaudio (7.3.6 - SDK 10.7) Support
      /System/Library/Extensions
      [not loaded] com.cisco.cscotun (1.0) Support
      [not loaded] com.olympus.CamBlockCommandsDeviceUP (3.1.0 - SDK 10.6) Support
      [not loaded] jp.co.yamaha.driver.YamahaSteinbergUSBAudio (1.6.0f1 - SDK 10.6) Support
    Launch Agents: ℹ️
      [invalid?] com.cisco.anyconnect.gui.plist Support
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.cisco.anyconnect.vpnagentd.plist Support
      [running] com.line6.l6ksettingmgr.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
    User Login Items: ℹ️
      AirPort-basestasjonsagent Program (/System/Library/CoreServices/AirPort Base Station Agent.app)
      witchdaemon Program (/Users/[redacted]/Library/PreferencePanes/Witch.prefPane/Contents/Resources/wi tchdaemon.app)
      iTunesHelper ProgramHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Dropbox Program (/Applications/Dropbox.app)
      DVDAuthorizeHelper Program (/Users/[redacted]/Library/Application Support/Helper/DVDAuthorizeHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.3.1164 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      AdobePDFViewer: Version: 10.1.12 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
      SharePointBrowserPlugin: Version: 14.3.4 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
      Line6AudioMIDI  Support
      Perian  Support
      Witch  Support
      Yamaha Steinberg USB  Support
    Time Machine: ℹ️
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 487.87 GB
      Destinations:
      Data [Network]
      Total size: 2 TB
      Total number of backups: 110
      Oldest backup: 2013-05-13 07:48:39 +0000
      Last backup: 2014-10-13 17:31:26 +0000
      Size of backup disk: Adequate
      Backup size 2 TB > (Disk used 487.87 GB X 3)
    Top Processes by CPU: ℹ️
          47% Logic Pro X
          5% WindowServer
          3% com.apple.WebKit.Plugin.64
          0% sysmond
          0% coreaudiod
    Top Processes by Memory: ℹ️
      1.08 GB Logic Pro X
      292 MB Safari
      266 MB Finder
      249 MB com.apple.WebKit.WebContent
      198 MB com.apple.IconServicesAgent
    Virtual Memory Information: ℹ️
      33 MB Free RAM
      3.67 GB Active RAM
      3.68 GB Inactive RAM
      1.19 GB Wired RAM
      3.97 GB Page-ins
      4 MB Page-outs

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so slow that I wind up having to crash and restart most of the time.  This is true regardless of the app I am using at the time.  The specs of th

    I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time.  This is true regardless of the app I am using at the time.
    The specs of this iMac are:
    iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
    I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
    Except that for all practical purposes, my computer isn't working. 
    I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
    Any and all suggestions will be greatly appreciated!

    First, back up all data immediately, as your boot drive may be failing.
    If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
    If iCloud is enabled, disable it.
    Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    You must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
    Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

  • Imac has crashed..need new hard drive....had external drive connected...was using time machine.....so...itunes file should be on external drive....how do i import them to my new mac mini?

    my iMac has crashed...was told I need a new hard drive.....meantime I bought a mac mini.....I had an external drive connected to the mac....and was using time machine for backups....so....how do i move itunes music files to my new mac mini from the external drive?

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source volume. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the access list. Give yourself read access if you don't already have it. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

Maybe you are looking for