My iMac has the No sign at the grey screen and won't boot up.

It's been acting strange lately-- I tried to run DiskWarrior 3 yesterday and it wouldn't boot up from the CD-- I did the hold down the C key as well as going in and clicking off the 'ignore' box.  I thought that it was because I needed a newer version of DiskWarrior-- but now I'm thinking maybe it was something bigger?
Is there a safe way to make it boot up?  BTW-- I can't remember exactly which OS it has-- I'm 99% sure it's Snow Leopard, if that helps?
Thanks!!

Reinstall Snow Leopard:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

Similar Messages

  • Mac Pro gets stuck on the grey screen and won't finish booting

    I have a Mac Pro 1, 1 recently (successfully) upgraded to snow leopard that gets stuck on the grey screen with the spinning rainbow cursor (after the apple logo and brief blue screen) and won't finish booting up. This happened after my computer froze up and I had to force quit.  I checked out the forums and I tried all the all the suggestions (like disconnecting peripherals) and appropriate disk utilities, saw no errors with the HD reported, and had no trouble doing a safe boot  (everything works o.k. there) or starting up from the software disk to perform the repairs.  I did notice that during the repair permissions command, it gets stuck in the last few minutes, the CD starts to chug along, and everything freezes and I have to force quit.  This happens every time I try it.  I eventually backed everything up, erased the HD and reinstalled the OS, reset PRAM and NVRAM, but I'm still getting the grey screen on restart.  Tech tool deluxe reports a "fail" on the video RAM, but everything else seems to check out.  Could it be a graphics card issue?   I did notice some funky visual glitches occurring prior to the breakdown.  Any other ideas?

    I wouldn't trust Apple Disk Utility to do a hard drive repair, but I would go with TechTool Pro 5/6 if you have that instead of Disk Warrior from Alsoft.
    Clone the drive, though you should have some bootable backup clones already; repair the clone; then boot and work from that drive. Always have a working copy of the system.
    And off load all your data to other drives.

  • My husband(less technologically inclined than I am), decided to delete programs from our iMac, now it has a grey screen and won't get past it. If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

    My husband(less technologically inclined than I am), decided to delete programs from our iMac, he turned it off and now it has a grey screen and won't get past it. It won't start in safe mode and when I  If I insert the Application Install DVD, to repair the disk, will I loose all my pictures and music?

    With a corrupt disk, the install procedure is most likely going to fail.
    How old it the disk?
    You might be able to reformat it to fix the problem. Of course that means you lose all of your data.
    The other alternative is to get a new disk drive and put that in your Mac and install OS X
    Then put the old disk drive in an enclosure and see what can be recovered from it.
    Allan

  • 2007 intel based iMac has the white screen of death with the mouse visible?? WHATSUP

    My 2007 Intel based IMAC has the white screen of death with the mouse cursor as the only visible item.  What is up with this?  Is this the equivalent of the windows blue screen of death?
    Doug

    Read the "More Like This" thread links located at the bottom left of this page.

  • HT1688 My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution t

    My iphone is neither shown in itunes nor in redsnow .. what is the problem ? It has the black screen and the sound plays when it is plugged into the computer .. I tried to hard reset but only the sound plays nothing is shown is there any solution to this ?? It says that my iphone is in soft dfu mode and in the my computer > manage>device manager > it shows the apple (dfu mode) having some error sign indicating no software installed i am running windows 8 ..

    Jailbreaking iOS can't be discussed in this forum.

  • I powered off my Ipad and it is stuck on the blue screen and won't shut off.  What can I do?

    I shut down my Ipad but it has become stuck in shutdown mode on the blue screen and won't turn off. What can I do to turn it off and try to restart it?

    Both buttons:

  • Ibookg4 will not go past the grey screen and will not accept a disc

    my ibook will not go past the grey screen and will not accept a disc

    Have you tried starting up in Safe Mode? If not, I suggest that you give it a try. This will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
    If this works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
    Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
    See if you are able to do a little hard drive maintenance to help things out.

  • TS2570 when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    Hi , and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Hold alt or option key at bootup, do asny boot choices show up?

  • My Imac won't go past the grey screen and apple logo! How do I fix the start up in my Imac?

    I really need help with this one!
    My Imac is stuck on the grey screen with the apple Logo, and it wont go past that.
    It does listen to certain keyboard commands to start it up (ive tried fixing it by reading other's posts.) But it will only listen to some commands,
    It doesn't start on Shift (safe mode) but it does start on command+shift+(other button) which is safemode viewed so you can see whats going on.
    As the letters on the screen type on, it says it's loading something but stays stuck there.
    I've heard about a way where you can use terminal from another computer and boot it that way, or using firewire cables.
    Please help! and take in mind I'm not really tech-savy with computers, so guides would be helpful!
    If there is any way to save the files in the computer that would be great. If it can't be done, it's fine, I just want it working again .
    Thanks,
    Gian Varela

    I really need help with this one!
    My Imac is stuck on the grey screen with the apple Logo, and it wont go past that.
    It does listen to certain keyboard commands to start it up (ive tried fixing it by reading other's posts.) But it will only listen to some commands,
    It doesn't start on Shift (safe mode) but it does start on command+shift+(other button) which is safemode viewed so you can see whats going on.
    As the letters on the screen type on, it says it's loading something but stays stuck there.
    I've heard about a way where you can use terminal from another computer and boot it that way, or using firewire cables.
    Please help! and take in mind I'm not really tech-savy with computers, so guides would be helpful!
    If there is any way to save the files in the computer that would be great. If it can't be done, it's fine, I just want it working again .
    Thanks,
    Gian Varela

  • I-MAC has the grey screen on start up, then shuts down after trying to load (bar shows 30%).

    Shutdown my I-mac and next morning the grey screen appears with a loading bar which gets to 30% and then i-MAC shutsdown. Went into Utilities and it shows my files etc. but the verify and the repair disk have not corrected the issue(s).
    What else can I do before I take it to the apple support. I live in Brunei and past history suggests that the Apple Support will just erase everything on the drive and I will lose the lot. I just want the photos and my own CD loaded music.
    Any suggestions would be welcome.

    Look at this: http://support.apple.com/kb/ts2570

  • How can I get rid of The Grey screen and boot my macbook?

    Today I was on my MacBook Pro (bought July 2011) and it went to a blank blue screen. I powered it off and tried to restart it. It loaded the apple and spinning circle but it went to a grey screen and froze there. I've read and tried a lot of different things already but nothing has worked. I did the hardware test and it found no problems. I tried to safeboot it.  I tried everything on here: http://support.apple.com/kb/TS2570 except the last suggestion (I'd rather not have to lose all my files unless absolutely nesseccary). I also tried the "hold Command + R keys" to try and get to utilities. Anything else out there that I could try? Not sure what the exact operating system is either.

    I wouldn't assume that's the hard drive. The fact that the screen turned blue all of a sudden isn't necessarily an indication of a hard drive failure. Check out this post I made yesterday:
    https://discussions.apple.com/message/21756819#21756819
    My personal opinion would be to try and boot from an external hard drive with the appropriate OS installed. With a 2011 model, I would assume that should be Snow Leopard or later. AHT doesn't catch everything, and I don't know if it even does drive scans for bad blocks. I do know for a fact that it pretty much limits itself to digital interfaces and can't go beyond analog driver stages. For example, if the driver stages of a FireWire port or ethernet port are blown, AHT will report them as being OK.
    If you got hit by a transient, which could indicate an internal supply problem or a line problem if you were connected to the internet via a wired connection or you were running off the charger, there's no telling what it might have caused the drive to do (if it's the drive) and it could easily cause the screen to suddenly go to blue, but what other damage was done?
    My point is that you need to confirm what the source of the problems are. If there's a logic board problem, your drive and data may be OK. If the drive is bad, some of it may still be recoverable. The problem may very well be drive related, but I wouldn't go out and start throwing money at new parts without first confirming what the cause of the problems is.
    Hope this helped, and good luck.

  • Help!! - I am faced with the grey screen and spinning gear!!

    Hi guys
    I have an intel-based imac and when i performed routine updates on it, it took long to switch off so i manually turned it off with the button. Normally this gives no problem, but this time it refuses to go past the grey screen with the apple logo and spinning gear. I have tried many of the fixes but to no avail...does anyone have any step by step instructions/suggestions...I cant get to any of my uni work. I tried disk utility and it said my hard drive is fine, yet when i restart im back to the grey screen!
    Please help, I cant access any of my files and cant risk having it wiped!!!
    Thanks in advance - sorry if this might be in the wrong section!

    I had the same issue, and I had recently backed-up my files (mostly because the mac was acting wonky before this even happened), so I did an erase and install. Then I ran through all the software upgrades and installed all of them. When I did a required restart (for the Mac OS X 10.4.11 update) it went BACK to grey screen with spinning ball. Talk about frustrating!
    I think there is something weird going on with the iTunes update and the Mac OS X 10.4.11 update. But one can't be used without the other. So I'm not sure how to update everything safely and get an up to date system, without having all the problems I had before. So now I'm using Mac OS X 10.4.7 so I can have a stable system to do my work, but I can't run iTunes 7.0. I'm too scared to update OS b/c I can't waste another day re-installing everything (for like the third time).
    I'm a pretty new Mac user (year and half) so this may sound really dumb, but any suggestions would be very welcomed. I may start a new thread instead of hijacking this one...

  • The screen on my Mac is white with the apple icon and the spinning timer and won't boot up

    The screening on my Mac is white with the apple logo and a spinning timer and won't boot up

    Take a look here to see if any of the suggestions help:
    http://support.apple.com/kb/TS2570

  • My macbook has question mark flashing on a grey screen and no functions, my macbook has question mark flashing on a grey screen and no functions

    Hi
    My MacBook has a question mark flashing on a grey screen and no functions, help?

    That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'llsee a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
    If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

  • My Mac Book Pro 17" has a blank screen and won't boot up?

    My Mac book Pro 17" the screen started to scramble and I restarted the computer....I then got a grey screen and the computer never booted up again....Any ideas?

    Hey Julius62,
    Thanks for the question. After reviewing your post, it sounds like you have a gray screen during startup. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    Mac OS X: Gray screen appears during startup
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

Maybe you are looking for