My IMac is frozen and will not allow me to get to the desktop screen.  How can I stop it from freezing?

My IMac is frozen.  When I power up it will only take me to the white screen with the apple on it.  I cannot get to the desktop screen.  Any help in fixing would be very much appreciated.  Thanks Pete

That's an ongoing problem with this recent version of iPhoto as you can see from the topics at the right under "More Like This".  The workaround that works for all is to export the photos to a folder on the Desktop and upload to Facebook with your browser until a fix is found.
Report your problems to Apple via http://www.apple.com/feedback/iphoto.html
OT

Similar Messages

  • My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    My iPad is frozen with the message not enough storage.  Options are close and settings but it will not respond to buttons and will not allow me to turn it completely off.  How do I get past that message?

    Delete some apps, files, photos, videos, movies, etc to free up some space.
    How much space is your Other using? You may be able to reduce.
    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • IPad Wi-Fi has the self-assigned IP address 169.254.210.251 and will not be able to connect to the Internet.  How to fix?

    Mini connects to internet via cable modem fine.
    Want to have ipad connect also but mini Wi-Fi has the self-assigned IP address 169.254.210.251 and will not be able to connect to the Internet.  How to fix?

    Hello:
    I am a long way from a wi-fi expert, but.....
    You need, I think, either a router with wi-fi or an airport (express or extreme).  The iPad needs to connect to to a network.  In my case, I use an airport express and both my iMac and iPad 2 connect to the Internet through the airport device. 
    Barry

  • After updating Macbook to Yosemite, Adobe Bridge CS5.1 will not batch rename .jpgs without corrupting the files. How can I fix this?

    I have a student who when he tries to batch rename his .jpgs in Adobe Bridge CS5.1, the files will become corrupted and will not be able to open them. The extension is off. How can I correct this for him?

    Wait, I just caught this:
    lmartinecs wrote:
    …The extension is off. How can I correct this for him?
    Are you referring to the 3-letter ".jpg" extension being deleted?  You can't do that, of course!  If that is still the case, you'll have to add it manually to each JPEG file.

  • My I mac 27 late 2009 will not start up I get to the grey screen with the mouse cursor but it stays that way. if I press shift during the boot i works into safe mode. any idea?

    It gets to the grey screen and the mouse point sometime show up but noting more.
    when I press shift it does load up into safe mode
    i re-installed lion no changes

    Restart you Mac holding the "Control + R " keys then run the Restore feature.

  • A lot of tabs loads and tells me there was a problem loading the page. How can I stop all the tabs loading because ist slows down Firefox.

    When I open Firefox, a lot of tabs try to open at the same time. They all say Problem loading the page. It happened after I tried to download a owners manual for Harley Davidson motor cycles. How can I stop all but one tab from opening.

    This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
    If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
    See:
    * http://kb.mozillazine.org/Session_Restore

  • Time machine is frozen and will not allow force quit

    Time machine is frozen in a loop. It will not force quit and it will not stop. It last backed up almost 24 hrs ago and is now slowing Safari down with only a beach ball as any sign of life.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.   
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • HT1430 How can you reboot your Touch if the screen is frozen and will not allow you to use the "slide to power off"

    How can I reboot my Touch when the screen is frozen and I cannot use the "slide to power off" feature?

    Next try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • TS1425 My IPod will not allow me to return to the beginning.  I can press the menu button and it will not respond.  I have also tried to reset by pressing both the menu and center but ther is no response to it.  Help!

    The wheel on my IPod nano, 5th generation is unresponsive when I try to use the menu part to go back to previous books.  It's also unresponsive when I try to reset by pushing the menu and center in at the same time.  Can anyone help?

    If you have double checked to make sure the hold switch is not activated, it may be a hardware issue with the iPod's click wheel, meaning you'll need to have it serviced.
    Before doing that though, it might help to try and restore to factory settings in iTunes as well to rule out a software issue.
    B-rock

  • TS1702 I purchased black op zombies from the app store and it will not load for me to play the game.  How can I get a refund or get the game to load and work?

    I purchased black ops zombies and I can not get it to load to play it. How can I get a refund or get to run so that I can play it?

    The terms of sale state that: "All Sales are Final. There are no refunds."
    However, I've always found iTunes support to be helpful. So, go here, plead your case & hope for the best:
    http://www.apple.com/support/itunes/

  • My firefox browser window will not stay in full screen mode, it keeps reducing itself so I can't use the scroll down button on the side, so I have to constantly minimize and maximize to get to the scroll bar, How can I stop this?

    Like I said it happens every few minutes... It is annoying when you are on the internet for more than a few minutes because you constantly have to either minimize it or reduce the screen manually by hitting the button and then maximize it again to get the scroll bar to be in view to use it.

    Delete the localstore.rdf file at the following location:
    C:\Users\'''USERNAME'''\AppData\Roaming\Mozilla\Firefox\Profiles\'''PROFILE NAME'''
    I did this and it fixed it for several days, but it broke again eventually.

  • My computer a dell will not allow me to open Itunes (runtime error r6034) how can i fix this?

    Unable to dowload and open Itunes on my Dell computer. Shows a runtime error of R6034 how can this be fixed?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • When I updated/upgraded last it took away my Big Fish Games tool bar and WILL NOT reload it no matter what I do. How can I undo the last upgrade/date?

    My original question says it all. I cannot get my Big Fish Games toolbar to reload. It will with internet explorer but not with your product's new upgrade. I wish to undo the upgrade to the earlier version so I can get my toolbar back.

    This can be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    You should avoid using the same Firefox profile with different Firefox versions.<br />
    If you currently do then create a new profile exclusively for the Firefox 4 version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
    * http://kb.mozillazine.org/Testing_pre-release_versions
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

  • Firefox opens with a window that says "Checking for compatibility for Add-ons" then it always opens 2 tabs... one with my home page and one that says Congratulations, Firefox is up to date. How can I stop it from starting that way?

    Firefox opens with a window that says "Checking for compatibility for Add-ons" then it always opens 2 tabs... one with my home page and one that says Congratulations, Firefox is up

    Hi konee,
    You should look at [https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox this article about that specific issue] and the article [http://kb.mozillazine.org/Preferences_not_saved Preferences not saved]. These should give you all the information you need!
    If that doesn't work:
    # Type about:config in the address bar
    # Click ''I'll be careful, I promise'' if prompted
    # In the Filter input field type ''startup''
    # Double click on startup.homepage_override_url
    # Delete the text string and click ''OK''
    # Close Firefox and reopen the window to verify that it has worked.
    Hopefully this helps!

  • When i try to download an update the dropdown automatically inserts my apple id which is wrong. It's in gray and will not allow me to type in a correct id. How do I stop / delete the automatic insertion of the id?

    When i try to download an update from the appstore the dropdown  menju automatically inserts my apple id (which is wrong). It's in gray and will not allow me to type in the correct id. How do i stop the auto insert so that i can enter the correct id?

    the original apple id was entered incorrectly. Apple says it must be a email address.  My email address is correct but the letter ( t ) somehow got added to the (.com) so that when i try to enter my id it is automaticly loaded with the email address the ends ( .comt ) . According to Apple this is not a "legal" email id.  But it appears on my dropdown in gray and i cannot alter it or delete it, thus preventing me from downloading software updates.

Maybe you are looking for

  • How to download a file from server machine to client machine using jsp

    Hi, In my application, I have an excel file stored on my server machine. How can I download that excel file on to my client machine using jsp. Is there any other way I can open that file from my machine and save it in my machine using jsp/java? Its a

  • Unit Price and Document Total in a Marketing Document

    Hi Experts, I am trying to post a marketing document through the DI API.  I have assigned value to the document lines as follows:                 sapDocument.Lines.ItemCode = items.MaterialCode;                                sapDocument.Lines.Quanti

  • Total in reprot footer

    I have three groups in the report  Group A, B,C . Now in group 3 i have hours displayed. I need the sum(hours) in the group A footer. Can anyone please help me out?

  • This company is no longer a joke.

    The reason for the title of this thread is [should] be obvious to most customers who have had problems due to the so called DLM used by all ISP`s except cable. I had a profile drop from 77.44 to 61 a while back,and the mods took up the case. I refuse

  • Am I covered by the warranty for a cracked screen on ipad mini?

    Bought an ipad mini just over 2 months ago & cracked the screen tonight - am I covered 4 getting the screen repaired?