My imac is new, but your speakers do not work until you restart the computer

a few days ago to buy the iMac with OS X 10.7 Lion and the speakers do not work, reboot then run only when I'm desperatenot that happens, please help, thanks

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Similar Messages

Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally

Sometimes my iPad1 locks up and has the flat battery graphic after charging all night, but will not work until you disconnect the charger, then it reboots and the battery is fully charged and works normally.
It has only happened for the last month or so
Also, sometimes it drops out of apps, ie facebook etc. just like you have hit the stop button

Who replaced the battery? If it wasn't Apple the replacement is probably bad also. Either that, or the logic board is bad.

Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

Hi,
I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
Your help is really appreciated"

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

My iMac will not recognize the factory speakers or any external hard ware until I restart the computer.

Hey all,
I have a relatively new iMac (Purchased Dec 2011) that runs on OS 10.7.3. Currently we are having problems with the computer recognizing any plug-ins when we first turn the computer on (including all USB or Firewire hard ware and builtin speakers). The computer just does not acknowledge that they are there until I restart the computer, at which point everything works great.
I was wondering if anyone had suggestions on how to fix this issue... it's not major, but it is a pain to have to restart the computer each time you need to use an external hard drive or listen to music.
Thanks in advanced, and just to let you know I just updated my software yesterday.

As a test launch iPhoto with the Option key held down and create a new, test library. Connect the devices and see if the same problem persists. Does it?
OT

IMac G5 & new apple keyboard - some keys not working

I have an iMac G5 (2GHz, 20 inch), running OS X Tiger (10.4.11) and I recently purchased the new apple keyboard (the wired version without the numpad, to save desk space). I am finding that the function keys at the top don't work - specifically, the keys that control sound. I've googled this, and installed the Keyboard Software Update 1.2 that most people said fixed their problem - but it hasn't fixed mine.
Instead, the f10-f12 keys don't control the sound functions, but the f12 key ejects discs (it sits next to the eject button, so perhaps this is a wiring error?), and the caps lock key does not always work when hitting it - it needs a large amount of pressure. I would think that my keyboard was defective, but I just exchanged it yesterday, and the new one has the same problems. I'm getting close to just giving up and getting a refund.
Message was edited by: JumpingJehosaphat

Hello - thank you for the quick responses! To answer your question, yes, I have repaired my permissions and restarted, to no avail.
I have looked through the keyboard prefs quite a bit, and cannot find anything that allows me to choose where to map the sound keys. I have checked "Use All F1 F2 etc keys as standard function keys". In the small aluminum keyboards, the f keys are dual-function - in this case, the f10-f12 keys also control dashboard, etc, which I have turned off (but I have tested the keys with these options both off & on, with the fn key, without the fn key, etc - tried lots of combinations). I've tried quite a few things to get these keys to work. Honestly, the f1-f4 keys don't seem to work at all either.
I might try and take a video later today to show you what I mean. The caps lock key is the biggest thing that's bothering me - I use it instead of shift to type, and 75% of the type it does not activate when pressed...I would think this was just one bogus keyboard if it weren't for the fact that I already exchanged it once...

I am trying to cancel but your Chat is not working

I want to cancel my creative cloud - the deadline is tomorrow to avoid future charges, but the only way to cancel is through your chat and your chat button is not working, though it says agents are available. I've been trying for a couple days now and will be very upset if I can't get through to someone in time!

Which Creative Cloud membership do you want to cancel?
Learn how to cancel your Creative Cloud membership or subscription. http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

I recently tried updating my iMac, now when I power up it keeps telling me to restart the computer. How can I fix this on my own?

I tride installing updates for my iMac, and now when I try to turn it on it just comes up with a small window that tells me to turn off, then back on the computer. Is there a way I can fix this on my own?

Do you have any backups of your system prior to do those updates? If so revert them out. Or reinstall the system from your recovery partition.
The reason for this is those updates clobbered a log of people:
Thunderbolt Software Update 1.2 Causes Boot Failures
Thunderbolt Update plaguing MacBook Pros with kernel panics
So the only solution is to get them out of there and the only way to do that is revert your system.
OS X Lion: About Lion Recovery

HT201436 voice mail management is really bad with the newer version of software for my iPhone5 my old version deleted VMs instantly but now my phone freezes up and at times the delete button does not work until i set the phone aside for up to a minute.

I am having a hard time deleting unwanted voice messages with my new phone and software as compare to my iphone4 which was as easy as clicking on the delete button. VMs would delete instantly. with my iPhone 5 7.0.4 software ver the first one or two delete immediately then the phone freezes up for several seconds making the process frustrating. I am wondering if either I am doing something wrong or if there is a fix out there. its a giant step backwards for Apple.

I am having a hard time deleting unwanted voice messages with my new phone and software as compare to my iphone4 which was as easy as clicking on the delete button. VMs would delete instantly. with my iPhone 5 7.0.4 software ver the first one or two delete immediately then the phone freezes up for several seconds making the process frustrating. I am wondering if either I am doing something wrong or if there is a fix out there. its a giant step backwards for Apple.

My front speakers are not working.

I have a laptop HP Pavilion dv7-4180ea, Core i7 1.60 GHz, ATI Radeon HD 5650 1 GB, Windows 7 Ultimate x64 with 4 GB of RAM.
The problem came up after I reinstalled the windows about one week ago. After I downloaded the driver from HP Drivers and Support things didn't seem to work as they did before. The front speakers are not working anymore now, only the subwoofer works and it sounds awful. Is there any other driver I need to download or something? Thanks in advance.

Hi here. Use a Mini Display Port to HDMI cable and connect the HDMI into HDMI input on the receiver and the Mini Display to the Mini Display Port on your Mac.
- Go to System Preferences on your Mac. Click on the "Sound" icon. Then in the "Output" tab, select "(your speakers) - HDMI
- Then go into Applications via finder > Utilities > Audio MIDI Setup. On the left side of the window select HDMI. On the right side it then should say "Source: (your speakers)"
- Click the "Configure Speakers..." button in the bottom right of the window. Click the "Multichannel" tab. Then select "5.1 Surround" from the pull down menu. Click on each speaker to provide a test tone to make sure each is connect properly. Then click on "Apply" if there is no 5.1 option e.g it's greyed out use options 48000.0 HZ and 8ch-16bit Integer. You can then select Configure Speakers, Multichannel and 5.1 Surround from the drop down. When testing the speakers you may have to use the drop downs under each speaker to change the numbers for which speaker is where. Good luck :-) hope it works

Front speakers are not working.

I have a laptop HP Pavilion dv7-4180ea, Core i7 1.60 GHz, ATI Radeon HD 5650 1 GB, Windows 7 Ultimate x64 with 4 GB of RAM.
The problem came up after I reinstalled the windows about one week ago. After I downloaded the driver from HP Drivers and Support things didn't seem to work as they did before. The front speakers are not working anymore now, only the subwoofer works and it sounds awful. Is there any other driver I need to download or something? Thanks in advance.

@Miguda_4
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

I just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

hi i just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

thanks for the information about speakers. and i mean the battery back up the battery i always getting lower even im not use. and can u pls tell me how to check this as a brand new or not. b'coz in the store they gave me replacement phone without boxing. the phone was coverd by wrap and they never give any receipt for this

My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8,but not IE9...

My machine is Top of the range (my Company builds them so it had better be :) )
Amd 1100t , 8gb ram , Windows 7 64 bit etc, etc...
The is not a hardware problem , but a software problem with FF...Any help would be appreciated as I hate using IE 8 for anything at all :( but I have to keep it on my machines just to run my remote security cameras at my Computer shop ???
Original question...as question length is limited ...not very bright that limit by the way :(
"My DVR security sofware that I access remotely uses a "dvr .ocx" file....when I try it in Firefox , either the latest non beta (3.6.1.5) or the new beta version (4.0 rc) it will NOT work as it says the plugin is missing... it works in IE 8 (unfortunately) but not IE9...
As I own a Computer company I am fairly computer literate but cannot find a plugin that allows this to work in Firefox.... but I would have expected it to work in the new Firefox :(
All the best, Brett :)

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

Whenever I updated or downloaded a new app from the App Store, a message appears saying: "Account Not In This Store Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing." I made some research onl

Whenever I updated or downloaded a new app from the App Store, a message appears saying:
"Account Not In This Store
Your account is not valid for use in the U.S. store. You must switch to the Swedish. store before purchasing."
I made some research online and asked a few of my friends with the same problem. All they did was sign out of iTunes from settings>iTunes & App Stores or from the App Store itself and signed back in. It worked for many of them but not with my iPhone 4s. It really does get on my nerves to always sign out and back in to the App Store as it sometimes works and allows me to update and download or most of the time it doesnt.
When viewing my Apple ID account on my iPhone (after entering the password) it either views my account or says:
"This Apple ID is only valid for purchases in the U.S. iTunes Store. You will be switched to that Store. Try your purchase again."
So I press on OK then either switches me to the App Store app of its choice, or says "Cannot connect to iTunes Store".
I tried restoring iOS6 hoping it was a bad installation, but i still have the same problem.
Can anyone help me please?
Arian

Are you sure your AppleID is NOT tied to the US store? If you are trying to buy an app from the Swedish store you will be unable to do that. Some apps are only available on certain stores. That is why you get the "Cannot connect to the iTunes store" message when trying to buy that app. Your updates are being done from the US store ; thats why you can update sometimes and sometimes not.
If you keep encountering problems contact iTunes support. They will help you sort it out.

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

When I clicked on Firefox, the update bar started but when it stopped Firfox would not open. The blue screen of death popped up and said something about a new installation. We restarted the computer and now Firefox will not open. Help!

When I clicked to open Firefox the update bar appeared and an update loaded. Usually when this happens Firefox will open up when the update is finished. This time it did not open. when I clicked on the icon again the blue screen opened and said something about a new installation and if this was the first time you have seen this screen restart your computer and try again. I restarted the computer and when I clicked on the Firefox icon the "hour glass" would appear like it was trying to open but it never would open. I don't know what else to do.

See below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it

My imac is new, but your speakers do not work until you restart the computer

Similar Messages

Maybe you are looking for