My Imac is not finding my wireless keyboard, i have replaced batteries with no luck. My wireless mouse works fine.
My keyboard wasnt responding so i changed the batteries and still got no response. i rebooted and mac still doesnt show if is finding the keyboard. my wireless mouse is working fine. But becuase i rebooted, now i cant type in my password and am locked out of the system. Not sure if keyboard is bad or if it is problem with the imac?
Can you borrow a wired keyboard? And / or take the keyboard into an Apple Store and ask if you can try it on one of their Macs.
Similar Messages
-
21" Imac suddenly stopped finding the wireless mouse (with new batteries)
Despite my changing the batteries in the wireless mouse, and despite the fact that the Bluetooth is working with my wireless keyboard, I can't get the IMac to recognise and connect with the wireless mouse. Any ideas?
Hi Steve,
I just started having the same problem with my mouse. First it started not waking the computer. Today even the space bar wouldn't wake the computer. But I'm more concerned with reconnecting with the mouse. How did you delete the mouse in the Bluetooth devices list? I can't seem to delete it. Is it because I have a USB mouse plugged in until I fix the wireless one? I doubt that has anything to do with it. It sounds like your fix worked, but I can't delete the mouse. Help! Jeri -
Machine Description -
Windows 8.1 x64 (Keypoard, touchpad only no touchscreen !)
8Gb Ram, i7 Processor,
Nvidia 630M 2GB
Adobe reader installed on my 128Gb SSD.
Problem is same whether small/large file is opened from SSD or my another HDD.
Disabled all adobe security enhancements, windows defender, firewall still the problem is same.Hello,
Please try with our latest patch release - http://www.adobe.com/support/downloads/product.jsp?platform=windows&product=10
~Deepak -
My iMac will not display my wireless networks, any suggestions?
I have 3 wireless netowrks in my house. My iMac will only display the one that is for my home automation system and it is not connected to the internet. Any suggestions on this? When I click the wireless icon at the top it only shows 1 network, it won't display my other network or my neighbours networks. When I try to add one of the other networks in my house, it will not find them.
Wireless Diagnostics - About
Also try turning off Bluetooth -
My iMac does not find my wifi printer or my Chromecast.
My iMac does not find my wifi printer or my Chromecast. I was able to ping the chrome cast and printer and I'm able to connect to these devices with my windows computer, iPhone and iPad. I have OS X 10.9.2. I'm able to print by setting up the printer using the IP address that was assigned by my router instead of letting my iMac do the finding. It seems that the iMac either does not like the info that is receiving or something is blocking the signal (other than the firewall, which is off). Could someone have an idea what the issue might be?
Hi MikeMart0923,
If you are having issues adding or connecting to your WiFi printer from your iMac, you may find the following articles helpful (apologies if you have already seen them):
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
Note: This is assuming you have a simple network configuration, with only a single router/WiFi access point.
Regards,
- Brenden -
My Macbook Air (13", mid 2011) right after I did the Maverick OS update. My keyboard on Macbook Air is not working and it says "There isn't a keyboard connected" (Bluetooth Keyboard Setup). I do not use a wireless keyboard. Apparently my bluetooth works because my wireless mouse works. I am currently stuck at my login screen not being able to get in because I can't even enter my password. I am, however, able to login as guests and get to the Keyboard viewer to type things with my wireless mouse. I really need my keyboard to work to use for my job. I need help please!
I forgot to mention that my power button did work but everything else, keyboard and trackpad, didn't! Anyway, I shutdown my laptop, slept, and turned it back (in hopes that it might work instead of restarting it like before). Now my keyboard and trackpad works! Thank goodness! I was about to go to the Apple store upset too!
-
I have an ipad first generation. I am trying to connect to a linksys router and the ipad is not finding the wireless network. What do I need to do? Thanks for your help.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My macbook air 2013 will not find any wireless printers
My macbook air 2013 with OS X 10.9.3 will not find any wireless printers. I've tried to add printers at a number of different locations and each time it fails to find any printers despite one's being online and fully functional. I am able to print from my iPhone on these networks to the wireless printers but my macbook air won't find any at all? The macbook air is online using the wifi network no problem - just won't find any printers, please help.
You can download and run the free application Bonjour Browser. It will show whether the printer is detectable on the network. The printer should show up in one or more of the following categories:
Internet Printing Protocol
Print Spooler
Printer PDL Data Stream
Remote I/O USB Printer -
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.
hi
could you tell us what the other app is please -
my ipod classic is visible in windows but not in itunes, this happens on 2 different computers where my iphone and ipod touch work fine which leads me to think something is up with the ipod itself and i cant find any threads to help.
any thoughts anyone??Perhaps the reason you haven't had any replies is because there is no such thing as an 8GB iPod Classic.
I suggest that you begin by correctly identifying which iPod you have.
http://support.apple.com/kb/HT1353 -
iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???
There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers. -
I can't get volume on Main Output to work correctly with controllers on my keyboard. It's either all on or all off. Works fine for individual instruments (thought it lumps them all together) but not for main volume output on concert. Thanks for any help.
Hi
frodojon wrote:
I either didn't do the correct mapping sequence before or I'm starting to wonder if it has something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel.
All this sounds like you are confused about the general nature of MIDI Continuous Controllers (MIDI CC). The MIDI specification allows for 128 different CC's: CC0 to CC127. Some are typically "preallocated" to 'standard functions: CC1= Modulation, CC7=Volume, CC10+Pan, CC11= 'Expression'. Some act as switches such as 'Sustain' CC64.
frodojon wrote:
Everything appears to be scaled from -63 to +64 if that's what you mean by scaling? What do you mean by MIDI CC7?
Mainstage works with MIDI CC's generally in a number of ways:
Some standard ones are automatically passed through to all MIDI/Instrument channels unless you specifically block them. Others are not passed through unless you specifically map them to something.
This mapping can be done basically two ways (with MS 2.2):
a) Make a Screen Control in Layout mode, and assign it to a particular incoming MIDI CC message. Then, you can map this Screeen Control to a variety of parameters such as the volume of a particular channel strip.
b) With MS 2.2, you can do the above Assign and Mapping directly, without the need for Screen Controls as an 'intermediary'.
frodojon wrote:
something to do with my keyboard which has the expression pedal set to the same volume control as the mod wheel. I
Yes.
It sounds to me like you have an issue where you have several hardware controls on your Keyboard set up to transmit the same MIDI CC. This is probably not a good idea, and it would be much better if you assigned them to transmit different CC messages (CC1 for Modulation and probably CC11 for the Expression (though you may want to set the pedal to some other number instead.
Once you are transmitting different CC messages, you will be able to Assign and Map much more flexibly:
for example, you could one to control the overall output volume at Concert Level in MS, whilst the other controls the volume of a specific channel within a Patch.
Your issue of layered patches is one of "Scaling": one Screen Control (assigned to an incoming MIDI CC message) needs to alter the ranges of different channel strips to different amounts. You can set this up by using multiple mappings for one Control, each set to work over a particular range (for example a goes from -20 to 0 whilst b goes from -30 to -20 etc.).
hth
CCT -
Using Airport Utility, OS X Yosemite sometimes does not find my airport extreme and my iphone 6 with 8.1 does find it. Is anyone else experience this glitch? Also I couldn't log on to Apple Support... Thanks
*Feedback*
"Use the form below to send us your comments. We read all feedback carefully, but please note that we cannot respond to the comments you submit."
http://www.apple.com/feedback/ipad.html
We can complain about Apple's business decisions, but these discussions are user to user talk about possible solutions.
Here are the places to report bugs:
Get an account at
http://developer.apple.com/ then submit a bug report to http://bugreporter.apple.com/
Once on the bugreporter page,
-- click on New icon
-- See if you need to attach a log file or log files, clicking on Show instructions for gathering logs. Scroll down to find the area or application that matches the problem.
-- etc. -
I have saved a large number of cd on an external drive via my laptop. I have now moved my external drive to my desk to but I tunes does not find all the CD i have saved on the external drive
Depending on which email client software you use
the files should be in 'your home folder' library, esp.
if you use Mail application.... ~/Library/Mail
Since you don't specify what mail application,
that would most be associated with the file.
I notice there are some items to the right of your post
where it says "more like this' so that may be worth a
look to see if similar issues were answered. Also, the
Help viewer in your system is a searchable database.
Seems that google also brings up fair information, too.
Do you have a complete bootable clone of your entire
Mac system on an externally enclosed hard disk drive?
Good luck & happy computing!
Maybe you are looking for
-
Difference between vector obj.clear() and Vector obj = null
What is the difference between clearing the Vector object with .clear() method and assigning null value to Vector object? As per memory point of view, is it advisable to first clear vector and then assaign it to null for garbage collection or it does
-
Need to update custom fields in MSEG table using "BAPI_GOODSMVT_CREATE"
Hi All, There is a requirement to update custom fields in table MSEG which are part of append structure. There is a option to update the custom fields using the one of the tables parameters "EXTENSIONIN". Anyone please advice how can I update the cus
-
Broadwell Intel Audio Only HDMI Output
I have been trying for the last couple of days to get audio working on my Dell New XPS 13 (too new, maybe?). I don't think it's a hardware failure because the laptop is only four days old and the audio works when booted into Windows 8.1 (which is my
-
HT1750 I have an Itunes account I started on my PC, how to I access that library in my I Mac?
I have an I tune account I started on a PC, how can I access that account and library on my IMac?
-
Integrations in 2012 seem limited. I have Ofice 2010 and WP Office X5 installed GW 2012 sees only PowerPoint and Quattro Pro in the Integrations list. I have completely removed the GW 2012 client, cleaned up the registery and msic folders containing