My iMac is only several weeks old and the light on caps lock stopped working any advice?

My iMac is only several weeks old and the light on caps lock stopped working any advice?

Hi
Does the Caps lock still work, just not the LED?
Or does the caps lock not work at all? You usually have to hold the caps button for 1-2 seconds.
If the key is indeed faulty, then you should contact Apple, or go to an Apple Retail Store, or Service Provider to have the keyboard replaced

Similar Messages

  • The speed of my iMac slow only 2 weeks old why?

    the speed of my iMac slow only 2 weeks old why?

    In addition to abrody's questions, have you downloaded non-Apple software that may be automatically loading, and perhaps not Lion-compatible? Go to System Preferences, users, and look at login items under your user ID.  This is easy to check ... do a safe boot by holding the shift key down when you boot. The boot itself may take longer than normal, but once the boot finishes, if the performance is what you'd consider normal, look to your login items. Also, while looking at System Preferences, look at any programs noted at the bottom of the window.

  • My iPad2 is four weeks old and the home button will not always close the applicaton that is currently running

    My iPad2 is four weeks old and the home button will not always close the application it is currently running and the problem is getting worse and I have tried to restore the iPad but this did not improve the problem...Is this a hardware problem that I need to seek a replacement

    Your home button and power button are completely unresponsive, even when you attempt a hard reset? If so you will have to put into recovery mode and restore through itunes or possibly DFU if that does not work

  • My iphone is a week old and the other day it was run over by a car? would i be able to have it replaced for $180?

    my iphone is a week old and the other day it was run over by a car? would i be able to have it replaced for $180?

    Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPhone that has failed due to contact with liquid may be eligible for out-of-warranty service.
    you can exchange a 4S for $199
    http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=iph one
    chose US from dropdown country menu

  • Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

    Hello guys,My first time in community.my problem is that my SIM card was working ok and from today at the left of the screen up shows that is searching for the sim.I contacted the carrier and the SIM card shows that is working.Any suggestions?

    Hey NicolasZen,
    Thanks for the question and welcome to the Apple Support Communities. I understand that you are experiencing issues with “No Service” or “Searching” on your iPhone. The following resource provides some great troubleshooting steps that you may wish to try:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/TS4429
    Your iPhone may have one of these symptoms:
    - iPhone displays "No Service" or "Searching" in an area of good coverage
    - iPhone doesn't regain service when returning to an area of coverage
    Resolution
    If you encounter either of the above symptoms on your iPhone, follow these steps to attempt to resolve the issue. Test after each step.
    1. Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
    2. Turn iPhone off and then on again.
    3. Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
    4. Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
    5. Update your iPhone to the latest version of iOS.
    6. Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
    7. Restore the iPhone.
    Thanks,
    Matt M.

  • Using iMovie and the voice over sound has stopped working?

    Using iMovie and the voice over sound has stopped working?

    Are these the internal speakers?
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Intel-based Macs: Resetting the System Management Controller (SMC)...
    http://support.apple.com/kb/HT3964

  • It's less than three weeks old and the paint.s already flaking off..

    Imagine my embarassment! Here I am telling all my friends how great my new Macbook is---the high quality---and the mat finish "paint" is already flaking off to the left of the mouse pad. My God! It's like a bad used car! I may hate the Windows OS and love this MacBook but I had no idea that it had some sort of sprayed on finish. Now it looks like crap; it looks old, used and cheap.
    And it's not even three weeks old!
    Hmmm...has this happened to my three year old HP laptop? No. How about my four year old Gateway? No. Maybe my six month old Toshiba? Nope. Only my over priced MacBook.
    Now...why am I posting here? Because I can't get the lame on line service request system to accept my request for assistance in any mode.
    "Painted on quality"...worse than the blue screen of death.
    Since I can't get any support---the phone number doesn't offer a choice for my problem---maybe I should drive an hour to the nearest Apple store---and stand outside showing everyone who comes by what a seventeen day old MacBook looks like.
    Cheesy and disapointing....never again!
    MacBook   Mac OS X (10.4.8)   First Apple....Probably my last

    Listen, it really is too bad that this has reportedly happened to your new machine. I am sure that if you take it to a certified apple technician they would send it away for you to be fixed or maybe replaced. I also have dealt with APPLE CARE on the phone and they have been great, in the past. Try to phone the apple care number again and talk to a real person, forget the menu. Having said all that, I still wish that my APPLE was made in USA, even though I would have to pay more, I would.
    bm

  • I have a WRT610n and the 2.4 GHz just stopped working (5 GHz network is working fine)

    Almost with the coming of the new year, the 2.4 GHZ net slowed down to nearly nothing.
    That is to say that it works only very slightly, and is usually not even visible as an option to select.
    But the 5 GHz network is available and works fine.
    Here is my setup:
    Speed touch modem supplied by Telus
    Linksys router WRT610n ( i think version 1, because there is nothing written to tell me otherwise - there is no ver 2 next to the model number)
    Macbook Pro laptop (new)
    dell windows laptop (old)
    two pc desktop machines (one running 2.4 GHz wireless net adapter, the other running a 5GHz net adaptor)
    an iPhone (new) --> only works at 2.4 GHz (i checked)
    the wireless networks are named as follows:
    "SHONESY 5 GHZ" for the 5 GHz signal
    "SHONESY 2.4 GHz" for the 2.4 GHz signal
    for months, everything worked fine. the macbook communicated on the 5 Ghz net along with one pc downstairs (wirelessly).,
    my iPhone communicated nicely with a full strength signal and good speed.
    then, something changed and the 2.4 GHz net all but failed.
    when the dell is plugged in via a hard line ethernet cable to the router, no problems - i get 1.3 MBPS on the speed test
    the macbook can only see the 5 GHz network, but works fine.
    same for the pc downstairs that runs on a 5GHz wireless network USB adapter
    the iPhone now only gets one bar (if anything at all), and usually cannot connect (but can usually see the SHONESY 2.4GHz network in the utilities/wifi setup area)
    i am really stumped.
    could the router have failed? how can i check it?
    what could explain what I am seeing.
    Thanks in advance for any help you can provide.
    colin

    Try resetting the device by holding down the reset button on the rear of the device for 30 seconds. If this does not resolve your issue, then it may be a hardware malfuntion. I have noticed that my 610n was running very hot and it was a common problem so I put a laptop cooler under it and its been keeping it nice and cool. May have just burned out. I hope you get it working.

  • The function to combine pdf files and the function to add bookmarks stopped working in 10.x

    We had VBA scripts in Access 2003 running with Acrobat 7.0 standard version to combine pdf files and to add bookmarks. The scripts worked fine. Now we installed 10.x and the functions stopped working. Does anyone share the same experience?
    In the scripts, we just call the OLE object with the code like:
        Set acroOrigPdfDoc = CreateObject("AcroExch.PDDoc")
        Set acroNewPdfDoc = CreateObject("AcroExch.PDDoc")
    Then we have the call "acroOrigPdfDoc.InsertPages" and "acroOrigPdfDoc.Save" to save the combined pdf files. All these functions work fine under 7.x. Under 10.x, they stopped working without any error messages.
    Can anyone help me?

    Post your problem in the forum for Acrobat SDK.

  • I upgraded to IOS 5.1 and the quick camera access has ceased working - any ideas?

    I upgradet to IOS 5.1 and the quick camera access ceased working - any ideas?

    Press the camera icon and slide it up.

  • Only 1 week old and and wont turn on

    I have a ipod nano just bought a week ago was listning to music and turned it off with full battery 30 min later it wont turn on, wont charge, wont recognize on the computer, wont reset tried all the help tips on apples support page its just dead. screen remains blank, and lost my reciept, what do I do anyway to get it back. please help first apple product very dissapointing!!!!

    Get it serviced or replaced.
    https://selfsolve.apple.com/GetWarranty.do

  • Update of software for iPad was interrupted and the iPad is now locked up.  Any ideas for how to re-start the update process?

    Hi all,
    I was updating the software on my iPad2 and while trying to multitask stopped the update process.  My iPad is now locked up and unresponsive.  Does anyone have ideas about how to re-load the update?

    You will need to hold down the power + sleep button, wait for restart, then hold home.  iTunes should then be in DFU mode.  Once in DFU mode connect to iTunes and click "Restore".  PRESTO!
    BF

  • I have Elements 11 and the Brush Tool continues to stop working.

    I've reset all tools, completely shut down my macbook but nothing is working.

    Go to your username>library>preferences and delete:
    com.adobe.PhotoshopElements.plist
    Adobe Photoshop Elements 11 paths
    Adobe Photoshop Elements 11 settings
    and any lockfiles with the same names.
    If you are using 10.7 or higher, that library is hidden. To see it, click the Go menu in the Finder and hold down the Option key and it will appear below the little house for your user account. In 10.7 and up, while you're in there, also go to the Saved Application States and delete any for PSE.
    Repair permissions (any version of OS X) and try again.

  • HT201401 hello there . i was use my iphone and its was working and i found it stuck and after while is turn off .stop working any more .its won`t turn on or connect to computer or charge ... i don`t know what is going on ?

    plz someeone help my iphone stuck then turn off and won`t turn on any more or connect to computer or charge any more????and today i found it working for 1 hour and turn off again plz help

    Who repaired the phone? I suggest taking it back to this repair facility. Since Apple replaces phones instead of repair, the repair facility would be the one to take care of your problem.

  • My MacBook Pro is stuck on the white page with the apple logo, spinning wheel, and a loading bar. I have waited awhile and the bar hasn't filled up. Any advice?

    I've never had this problem before and I could really use some help.

    I would shut it down (or force shut it down by holding the power button,) and reboot holding the command - R
    and get into the Recovery.  Use the Diskutility to Repair Disk and Repair Permissions.
    If errors show on Disk repair and corrected- run it again until it shows no errors found.
    Relaunch as normal
    http://support.apple.com/kb/HT4718

Maybe you are looking for