My iMac is running slower and slower? os x 10.8.2 24" early 2008  Any suggestions

Imac 24" early 2008 is running slower and slower. Software OS X 10.8.2 Any suggestions?

Suggestions To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
  1. Carbon Copy Cloner
  2. Data Backup
  3. Deja Vu
  4. SuperDuper!
  5. SyncTwoFolders
  6. Synk Pro
  7. Synk Standard
  8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Similar Messages

  • HT1338 My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up??

    My Mac book Pro is running very slow and the rainbow ball is appearing all the time. Any suggestions for clean up?? I have the OS X Lion system.

    As well as what a brody asked :
    - do you need more RAM? (run Activity Monitor and see how much free RAM - green - is available)
    - do you Restart fairly regularly, e.g. at least once a week, to clear out any swap or temporary files?
    - do  you need to do maintenance, e.g. clearing out caches and unused logs, etc?

  • My iMac is getting slower and slower

    My Mac (3.2GHz Intel Core i3 4GB Memory) is about 4 years old and has been getting slower and slower over the last 5 or 6 months. An earlier post recommended using 'Etracheck' which I have done and attached the information below. I think I may have a Ram issue but I would be grateful for any comments.
    Thanks
    Hardware Information: ℹ️
      iMac (27-inch, Mid 2010) (Verified)
      iMac - model: iMac11,3
      1 3.2 GHz Intel Core i3 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 0/DIMM1
      empty empty empty empty
      BANK 1/DIMM1
      empty empty empty empty
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      ATI Radeon HD 5670 - VRAM: 512 MB
      iMac 2560 x 1440
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 6 days 16:10:12
    Disk Information: ℹ️
      SAMSUNG HD103SJ disk0 : (1 TB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 999.35 GB (629.98 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
      Canon MG4200 series
      Primax USB OPTICAL MOUSE
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Western Digital My Passport 070A 999.5 GB
      S.M.A.R.T. Status: Verified
      EFI (disk4s1) <not mounted> : 210 MB
      Backup (disk4s2) <not mounted> : 999.16 GB
      Apple Computer, Inc. IR Receiver
      Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
    Startup Items: ℹ️
      ChmodBPF: Path: /Library/StartupItems/ChmodBPF
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.GSSCred.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.tccd.system.plist
      [failed] com.apple.wdhelper.plist
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [invalid?] com.oracle.java.Java-Updater.plist Support
      [running] com.rim.BBLaunchAgent.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.ea.origin.ESHelper.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [invalid?] com.oracle.java.Helper-Tool.plist Support
      [running] com.rim.BBDaemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      BlackBerry Device Manager ApplicationHidden (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
    Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 4.1.2f1 Support
      Default Browser: Version: 600 - SDK 10.10
      Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
      AdobePDFViewerNPAPI: Version: 10.1.12 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      AdobePDFViewer: Version: 10.1.12 Support
      EPPEX Plugin: Version: 10.0 Support
    User Internet Plug-ins: ℹ️
      BlueStacks Install Detector: Version: Unknown
      Picasa: Version: 1.0 - SDK 10.4 Support
    Safari Extensions: ℹ️
      Slick Savings
      Searchme
      Amazon Shopping Assistant
      Ebay Shopping Assistant
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 999.35 GB Disk used: 369.37 GB
      Destinations:
      Backup [Local]
      Total size: 0 B
      Total number of backups: 0
      Oldest backup: -
      Last backup: -
      Size of backup disk: Too small
      Backup size 0 B < (Disk used 369.37 GB X 3)
    Top Processes by CPU: ℹ️
          3% WindowServer
          0% AppleSpell
          0% BBLaunchAgent
          0% coreservicesd
          0% Microsoft Word
    Top Processes by Memory: ℹ️
      180 MB Mail
      176 MB iTunes
      64 MB softwareupdated
      52 MB Safari
      47 MB mds_stores
    Virtual Memory Information: ℹ️
      35 MB Free RAM
      824 MB Active RAM
      808 MB Inactive RAM
      652 MB Wired RAM
      19.96 GB Page-ins
      1.41 GB Page-outs

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • IMac getting slower and slower....

    I've had my iMac for just under a year and recently it has seemed to be getting slower and slower and more buggy. Today GoLive CS2 refused to launch. No error code, just bounced in the dock and then stopped. My Finder keeps "not responding" when I am opening a folder on my harddrive. I've had problems with external firewire drives, it's just getting frustrating, and it's been getting worse over the last week or so... Also I've been having font problems too... I haven't installed a massive amount of fonts, but all of a sudden it's telling me it can't find "Arial TT" when I open InDesign I've repaired permissions, zapped PRAM, and I'm performing the hardware test as I type this (on my PowerBook). I've used Macs for many many years and consider myself a pretty advanced user so I'm not thinking this is user error. Has anyone else had similar problems?? I don't use a bunch of third party junk software on here, it's basically apple apps, and the Adobe CS2 Suite. I maxed the RAM with Crucial RAM when I first got it, so all that should still be good. Help? Suggestions? I know I could always wipe it and start again, but unfortunately at this moment I don't have enough external HD to back everything up to do this...
    iMac G5 2Ghz   Mac OS X (10.4.6)  

    947/3393
    Hi rorydale,
    Speaking of "not enough external HD to back everything up":
    You know that Mac OS X needs a lot of free space on the boot drive, like at least 10%-15% free space?
    Along with RAM, that's the only thing Mac OS X cannot do well without.
    Then,
    before starting a good read of this article and its excellent links:
    - http://docs.info.apple.com/article.html?artnum=25392
    I would make sure some regular maintenance is performed, just to take a safe start.
    1) Nightly "periodic" maintenance tasks:
    Open Terminal and paste this command:
    sudo sh /etc/daily
    hit enter, password, enter, wait until you see the prompt again.
    OK now this one:
    sudo sh /etc/weekly
    (this one takes a long time, especially if you never ran it. You can use your computer while it is running, but do not quit Terminal)
    Then, this one:
    sudo sh /etc/monthly
    Again, wait for the prompt to reappear.
    2) Run Preferential Treatment, delete the corrupted .plist files if it finds some.
    3) Run a Disk Repair with Disk Utility from the Tiger install DVD (menu Utilities).
    4) Permissions Repair of course (from the boot volume, not the install disc)
    5) Fonts can get problematic. I would trash Fonts caches too. Read about Fonts also in the Troubleshooting KB articles...
    6) Users caches can be cleaned just to make sure. You'll see later if you still need to tinker the system and kernel caches.
    That's for a start, let us know how it goes...
    Axl

  • My imac is getting slower and slower and has probems connecting to internet. Any idea on how to restore initial performance? thanks

    my imac is getting slower and slower and has probems connecting to internet. Any idea on how to restore initial performance? thanks

    What year, screen size, CPU speed and amount of RAM installed?
    What version of OS X is your iMac running?
    How full is your Mac's hard drive?
    How many applications do you run simultaneously in the background while working in another application?
    Do you run any antivirus software on your Mac? Antivirus software can slow down the normal operation of OS X.
    Do you run any "crapware" like Mackeeper or any other type of so called hard drive "cleaning" apps?

  • My computer is getting slower and slower. Is there a standard utility I can run to clean things up?

    My Imac is getting slower and slower. Is there a standard utility I can run that will clean things up? I am an old PC guy but changed to Mac about 5 years ago. PC had a program called DeFrag. Is there anything like that for the Mac?  Thanks, Rick

    Rick,
    A Mac that loses performance can be caused by many many things. Forget about Defrag, that isn't the problem and is something done by PC users in the 1990s. The more common things to check are RAM (do you have enough) and Login Items. You can easily check if you need a RAM upgrade by operating your computer as you normally do and opening Activity Monitor (Applications - Utilities - Activity Monitor) and click the System Memory tab. In the lower left you will see:
    Free
    Wired
    Active
    Inactive
    Used
    If the amount of Free RAM is in the vicinity of 500MB or less your system needs more RAM.
    To check the Login Items navigate to System Preferences - Accounts - Login Items. If you seen applications in the list that you don't need loading when you login simply highlight them and click the - symbol at the bottom of the box to remove them.
    Finally I would recommend your visit and read 25 Ways to Speed Up Your Mac.
    Roger

  • My MacBook Pro (2010) running Mountain Lion is getting slower and slower. How do I fix the orphan files?

    My 2010 Macbook pro is running slower and slower. I went to the Genius Bar about eight months ago, and they botted up from the disk, and let it go through and find what  its process to find and fix what I think were "orphan" files. I cannot remember what they did, but when they did it, the speed on my Macbook picked up considerably.
    I have since upgraded to Mountain Lion, but these problems do not seem related to that. My 500 GB HDD is about 80% full.

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Universe.applyOverload Method Run non-linearly slower and slower

    Universe.applyOverload Method Run non-linearly slower and slower, that is, for the 10th user and restriction we add, this method runs 1 second, however, for the 80th user and restriction we add, this method runs 8 seconds.
    Customers think it's a bug for our BOE Java SDK method, could I know why this method is non-linear, and any way to improve its running speed.
    The following is the code, for interator 80 times.
    while (iter.hasNext())
                        user = (rpt_users_t) iter.next();
                        IOverload overload = (IOverload) newObjs.add("Overload");
                        overload.setTitle(user.getBoezh().trim());
                        overload.setUniverse(universe.getID());
                        overload.setConnection(connectionID);
                        overload.getRestrictedRows().clear();
                        overload.getRestrictedRows().add("HZB0101_T","HZB0101_T.BRANCH_COMPANY_CODE='3090100' AND HZB0101_T.DEPARTMENT_CODE='"+ user.getBmdm() + "'");
                        overload.getRestrictedRows().add("BM_T","BM_T.DEPARTMENT_GROUP_CODE='" + user.getBmzdm().trim()+ "'");
                        infoStore.commit(newObjs);
                        // Commit to User
                        IInfoObject everyone = (IInfoObject) infoStore.query(
                                  "Select TOP 1 SI_ID " + " From CI_SYSTEMOBJECTS "+ " Where SI_KIND='User' " + " And SI_NAME='"+ user.getBoezh().trim() + "'").get(0);
                        int everyoneID = everyone.getID();
                        universe.applyOverload(overload, everyoneID, true);
                        //infoStore.commit(objs);
                        System.out.println(user.getBoezh() + " loading...");

    When invoking applyOverload multiple times, it's O(N^2) if you're granting rights to a User or UserGroup. 
    When granting, the applyOverload method retrieves all Overloads applied to the Universe and walks across each one,  granting the identified ones and removing rights from others.
    Sincerely,
    Ted Ueda

  • My computer is running slower and slower.

    My computer is running slower and slower. The umbrella spins a lot.  Even with only one or two applications opened.

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Otherwise, take the steps below when you notice the slowdown.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Safari Running Slower and Slower

    Hello...No idea why, but Safari is running slower and slower lately for me on my MacBook Pro.
    Any suggestions on how I may be able to troubleshoot this?
    Thank you.

    The following usually works on both Tiger and Leopard:
    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl.)
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.
    If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
    http://www.macfixit.com/article.php?story=20070416000657464
    Many, including me, have also followed the advice given by others here to add DNS codes to their Network Settings, with good results in terms of speed-up:
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
    208.67.222.222
    208.67.220.220
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.

  • FIRE FOX IS GETTING SLOWER AND SLOWER LOADING PAGES I GO TO ONLINE. IT LOAD CIRCLE STOP SPINNING AND WILL START BACK BUT IT TAKES IT'S TIME TO DO SO. THIS HAS BEEN GOING ON THROUGH THE LAST SEVERAL UPGRADES.

    FIRE FOX USED TO BE A FAST BROWSER BUT IT IS GETTING SLOWER AND SLOWER. THE BLUE-E IS ABOUT TO THE POINT OF BEING FASTER THEM THE FOX. I HAVE ALWAYS LIKE THE FOX, JUST WANT TO FIGURE OUT THE PROBLEM WITH IT AND THE LONGER I HAVE THE WINDOW OPEN ARE UP THE WORSE IT GETS. I DO A LOT OF GAMING ON FACEBOOK PLAYING MAFIA WARS BUT THE PROBLEM IS NOT LIMITED TO JUST THERE IT IS ALL THE TIME AND EVERY WHERE. I HAVE TRIED ADD-ON'S THINKING THEY MAY HELP BUT NOTHING HAS DONE ANY GOOD. CHROME IS TWICE IF NOT THREE
    TIMES AS FAST AS THE FOX LATELY ON LOADING PAGES.

    For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices. 
    That all works.
    It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now.  They are all synced, and all was working just fine.
    I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
    Thanks for listening,
    Melissa

  • Macbook Pro getting slower and slower, freezing all the time

    Hi,
    My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
    Hardware Information:
              MacBook Pro (13-inch, Early 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.3 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    Startup Items:
              FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
    Disk Information:
              TOSHIBA MK5059GSXP disk0 : (500,11 GB)
                        EFI (disk0s1) <not mounted>: 209,7 MB
                        Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-898 
    USB Information:
              JMicron USB to ATA/ATAPI bridge 500,11 GB
                        EFI (disk2s1) <not mounted>: 209,7 MB
                        Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. iPhone
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              de.novamedia.driver.NMSmartplugSCSIDevice          (1.0.1)
              com.Cycling74.driver.Soundflower          (1.5.1)
              com.bresink.driver.BRESINKx86Monitoring          (8.0)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.oracle.java.Helper-Tool.plist
    Launch Agents:
              [failed] com.brother.LOGINserver.plist
              [loaded] com.oracle.java.Java-Updater.plist
              [loaded] de.novamedia.VodafoneDeviceObserver.plist
    User Launch Agents:
              [failed] com.akamai.single-user-client.plist
              [loaded] com.facebook.videochat.[redacted].plist
              [failed] com.google.GoogleContactSyncAgent.plist
              [loaded] com.macpaw.CleanMyMac.helperTool.plist
              [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
              [loaded] com.spotify.webhelper.plist
              [loaded] com.valvesoftware.steamclean.plist
    User Login Items:
              uHD-Agent
              GrowlHelperApp
              Alfred
              uTorrent
              Dropbox
              iShutdown
              HyperDock Helper
              Assistente de gestor de conteúdo
    3rd Party Preference Panes:
              Akamai NetSession Preferences
              Fan Control
              Flash Player
              Flip4Mac WMV
              Growl
              HyperDock
              Java
    Internet Plug-ins::
              DirectorShockwave: Version: 11.5.9r620
              o1dbrowserplugin: Version: 4.9.1.16010
              Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
              Default Browser: Version: 537 - SDK 10.9
              Flip4Mac WMV Plugin: Version: 2.3.8.1
              RealPlayer Plugin: Version: Unknown
              Silverlight: Version: 5.1.20913.0 - SDK 10.6
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
              Flash Player: Version: 11.9.900.170 - SDK 10.6
              QuickTime Plugin: Version: 7.7.3
              googletalkbrowserplugin: Version: 4.9.1.16010
              npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
              iPhotoPhotocast: Version: 7.0 - SDK 10.8
              SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
              JavaAppletPlugin: Version: Java 7 Update 45
    Bad Fonts:
              None
    Old applications:
              Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                        /Users/duarte_cunharosa/Applications/CMA.app
              Content Manager Assistant:          Version: 1.10.4086.78 - SDK 10.5
                        /Applications/CMA.app
              FacebookVideoCalling:          Version: 1.2.0.157 - SDK 10.5
                        /Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
              Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
              Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
              Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
              Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
              Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
              Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Document Connection.app
              Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
              Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Excel.app
              Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
              Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
              Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
              Microsoft Outlook:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Outlook.app
              Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
              Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                        /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
              Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
              Microsoft Word:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Microsoft Word.app
              Miro Video Converter:          Version: 2.6 - SDK 10.0
                        /Applications/Miro Video Converter.app
              My Day:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/My Day.app
              Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
              Plants vs:          Version: 1.0.40 - SDK 10.5
                        /Applications/Plants vs. Zombies.app
              RipIt:          Version: 1.6.2 - SDK 10.5
                        /Applications/RipIt.app
              SLLauncher:          Version: 1.0 - SDK 10.5
                        /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
              Solver:          Version: 1.0 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
              SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                        /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
              UPlayBrowser:          Version: 1.0.1.23853 - SDK 10.5
                        /Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
    Time Machine:
              Mobile backups: ON
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
              Destinations:
                        Time Machine [Local] (Last used)
                        Total size: 698.32 GB
                        Total number of backups: 3
                        Oldest backup: 2013-12-20 18:10:54 +0000
                        Last backup: 2013-12-22 19:52:17 +0000
                        Size of backup disk: Too small
                                  Backup size 698.32 GB < (Disk used 414.09 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                   9%          Transmission
                   4%          Dropbox
                   2%          WindowServer
                   2%          Dock
                   1%          Google Chrome
    Top Processes by Memory:
              123 MB          Google Chrome
              119 MB          iTunes
              102 MB          Dropbox
              87 MB          Google Chrome Helper
              66 MB          Finder
    Virtual Memory Statistics:
              148 MB          Free RAM
              995 MB          Active RAM
              859 MB          Inactive RAM
              1.03 GB          Wired RAM
              7.80 GB          Page-ins
              4.84 GB          Page-outs

    If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic  test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
    Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
    Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
    The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
    If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
    Step 2 
    Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
    PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    You can then quit Terminal. Please note:
    ☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
    ☞ When you type your password, you won't see what you're typing.
    ☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
    ☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
    ☞ The commands don't change anything, and merely running them will do neither good nor harm.
    ☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply    
    ☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
    ☞ Don't post the contents of the Terminal window.
    ☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply.

  • Is ther a way to speed up a Mac? Mine has gotten slower and slower over time.  When memory comes close to full would that have an effect on performance? Is there a way to determine unused programs/software to remove and free space?

    Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time. 
    When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?

    Things You Can Do To Resolve Slow Downs
    If your computer seems to be running slower here are some things you can do:
    Start with visits to:     OS X Maintenance - MacAttorney;
                                      The X Lab: The X-FAQs;
                                      The Safe Mac » Mac Performance Guide;
                                      The Safe Mac » The myth of the dirty Mac;
                                      Mac maintenance Quick Assist.
    Boot into Safe Mode then repair your hard drive and permissions:
    Repair the Hard Drive and Permissions Pre-Lion
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    Repair the Hard Drive - Lion/Mountain Lion/Mavericks
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Restart your computer normally and see if this has helped any. Next do some maintenance:
    For situations Disk Utility cannot handle the best third-party utility is Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
    Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
    Suggestions for OS X Maintenance
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
    Helpful Links Regarding Malware Protection
    An excellent link to read is Tom Reed's Mac Malware Guide.
    Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
    See these Apple articles:
              Mac OS X Snow Leopard and malware detection
              OS X Lion- Protect your Mac from malware
              OS X Mountain Lion- Protect your Mac from malware
              About file quarantine in OS X
    If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
    Troubleshooting Applications
    I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
    If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
        used to manage backups and to restore backups. Time Machine
        requires a backup drive that is at least twice the capacity of the
        drive being backed up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Referenced software can be found at MacUpdate.
    Additional Hints
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
    Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
    Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
    Check for applications that may be hogging the CPU:
    Pre-Mavericks
    Open Activity Monitor in the Utilities folder.  Select All Processes from the Processes dropdown menu.  Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Mavericks and later
    Open Activity Monitor in the Utilities folder.  Select All Processes from the View menu.  Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order.  If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar.  Click on the Force Quit button to kill the process.  See if that helps.  Be sure to note the name of the runaway process so you can track down the cause of the problem.
    Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

  • Firefox gets slower and slower over time.

    I have been using firefox for some time, Like it better than Safari generally, but I've noticed (and it has gotten worse with 3.6.x) that if you leave FF running for extended periods of time it gets slower and slower, does not seem to matter if add-ons are installed or not, and it gets REALLY bad after going in and out of flash based apps/games a couple times. It is not just a mac problem as this behaviour also happens on windows xp or newer, but windows OS needs to be rebooted daily anyways so most people won't notice.

    Proceed with [[Basic Troubleshooting]] first of all.
    You could also try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your add-ons is the culprit.

  • My Mac Pro is getting slower and slower

    I have an Mac Pro early 2009 version which is getting slower and slower. Startup time is about 3 minutes. How can I fix this?
    Thank you.

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutesafter the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of diagnostic report, such as hang logs — they're very long and not helpful.

Maybe you are looking for

  • Adding row at a table in indesign CS6 from javascript

    I have a table in my indesign page.It has one column and several rows. I want to add a row at the begining of the table  and add some text content to it. I tried some provided code but none have worked. This is how i reference the table object. var m

  • How to use shortcut keys on wireless keyboard with ipad

    i just purchased an ipad 4 with a wireless keyboard and do not know how to use the function keys on the wireless keyboard to access the homescreen, scroll up and down, etc.  please help with anything i need to turn on/off or download . thanks

  • Automatic Row Processing (DML) using synonym name instead of table

    I want my APEX form to select info using the table name but perform all the DML (add, change, delete) using the synonym name. I created the form using the wizard and went into the "Process Row of xxx" process that was created. I tried changing the ta

  • Need help in Change pointer creation

    Hi Guys , I have one issue ..Change pointer getting created for Vendor if i create it from the Custom Program But it has some problem while Using LSMW .. I just want to Know whether is there any Config issue with LSMW,, Please advice me how to slove

  • Interface messages SAP - WMS

    Dear experts, I am looking for the following information. I cannot seem to find a consistent answer, so I hope you can give me some more direction. I have the following interface requirement: - My customer wants to interface information towards an ex