My iMac is stuck on Grey Screen

Hi there I have a fairly new iMac running on Mountain Lion and it is stuck on the grey screen with the apple symbol and a spinning disk.
Several times it has restarted with a bar at the bottom that gradually turns dark grey but then switches off again on completion.
Can anybody offer any advice.
Thanks
Neil

You have directory damage. You should not use your computer until the damage has been repaired to avoid further damaging your directory.
The following software will repair your directory:
You must use the versions that are compatible w/your OS system & keep the utilities updated to avoid damaging/harming/trashing your system.
DiskWarrior Highly recommended for *directory damage* repairs.
TechTool Pro Multi-functional utility.
Drive Genius Multi-functional utility.
You will need to make your own decision on which to purchase. Read up on them on their websites because each does something a little different.

Similar Messages

Need Help For iMac G5 Stuck On Grey Screen Or Apple Logo No Spinning Gear!

Hello everyone i'm new here and i'm new for using iMac for some reason i was trying to clean or to fresh installation the iMac that my brother gave it to me that he bought it into the flea market without the original disk on it! when i erase the Macintosh HD and some of the partition o iMac then reboot it now the iMac stuck on grey screen or apple logo no spinning wheel shown. and i also try to search and try all the tips of all mac user's like all the command key's and follow the instruction of them but still nothing happen..
Holding CMD & R just to go disk utilities nothing shown up only apple logo and the noisy fan.
Holding alt and it go to blue screen and show my mouse Pointer Refresh Logo, Hard drive Icon, Arrow Sign.
i can click Arrow Sign and it go Apple Logo and within 2-3 seconds and it change to Power Sign Logo,
i can click Refresh Logo but nothing happen .
i can't click the Hard Drive icon.
CMD, Option, P & R to Reset i also try and it's the same nothing change.
CMD, Option, ESC no action shown.
Is there anyway to fix this issue or problem please and thank you for help.
Hoping to get result for all of you guys P.S
iMac G5
v10.5.8
Leopard

You need to have the install DVD that was issued with the iMac
You can call Apple at 1-800-275-2273

Imac 2008 stuck on grey screen with spinning wheel no discs I lost them

HI, I have a imac 2008 24" someone help please.stuck on grey screen with spinning wheel after 5 minutes mac just restarts again.I have no restore dvds as I borrowed them out and never got them back thanks

If you are in the US call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
If you are in another country:
http://support.apple.com/kb/HE57
Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html

IMac really stuck at grey screen - tried everything

Hi,
everytime I try to boot my iMac it gets stuck at the first grey screen. No logo, no loader, nothing but a grey screen.
I have tried everything here > http://support.apple.com/kb/TS2570 > with no results. The grey screen remains there, with no changes.
The only thing that seems to work, but only for a seconds, is holding the option (alt) key at startup. After a few seconds, the pointer of the mouse appears. And then, a few seconds later, it gets stuck too. That's the farthest I've managed to get.
I can insert and get install DVDs back, but they don't seem to load.
I've tried also DiskWarrior, with the same results.
Any ideas?

Hey jflam sorry to hear that. I know how frustrating that can be. One thing that the article doesn't mention that I'd try is repairing the disk from single user mode.
Boot to single user mode by holding down command-S at startup.
-If it works right it should take you to a black screen w/ white letters.
-Then just follow the steps in from this website. http://homepage.mac.com/geerlingguy/mac_support/mac_help/pages/0009-fsck_su_disk _repair.html
-Make sure if it tells you the disk has been modified that you repeat the command.
-If it says it's ok or if you can't boot to single user mode then it sounds like a hardware problem. You'd have to take the computer into an Apple Retail Store or Authorized Apple Service Provider to get your options on how to fix it.
Best of luck!

IMac gets stuck at grey screen with Apple logo and spinning gear

I have tried everything listed at http://support.apple.com/kb/TS2570 with no avail. Also, I have tried fsck from SUM, nothing. It will not boot to the CD either, even with the Hard Drive pulled from the machiene. Any ideas?

MrTuRtLe03 wrote:
I have tried everything listed at http://support.apple.com/kb/TS2570 with no avail. Also, I have tried fsck from SUM, nothing. It will not boot to the CD either, even with the Hard Drive pulled from the machiene. Any ideas?
The last step is to take it in for service at your local Apple Store or AASP, are you saying you did that and nothign occured?????????????????
Additional Information
If the issue persists after you follow the above steps, you may wish to make an appointment with a Mac Genius at an Apple store, contact AppleCare via phone, or contact an Apple Authorized Service Provider for assistance.

New iMac is stuck on grey apple screen after restart from Migration Assistant

New iMac is stuck on grey apple screen after startup. It is a 3.4GHz Quad-core Intel Core i5 running OS 10.9.4. The problem occurred after a migration from my older 2009 iMac which is running Snow Leopard 10.6.6. When the restart occurred from Migration Assistant, the new computer will not boot up to the login screen. Disk utility did not solve problem. Followed instructions for a soft reinstall of Mavericks but that also did not solve problem. Any suggestions?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Intel-based iMac stuck in grey screen with spinning wheel. SMC::smcReadKeyAction ERROR THOP kSMBadArgumentError(0x89)

Hi guys,
since yesterday my Intel-Based iMac doesn't boot normally, its stuck in grey screen with a spinning wheel.
Its an Intel-based iMac 21.5'' purchased in 2011, and i recently (2 months ago) upgraded it to Mavericks.
-2 weeks ago, i installed smcFanControl app
-Tried start up in Safe Mode by holding Shift but its not working. i think i hear fans are working more than they were before the problem occurs.
-entered Single User Mode and i get an error
SMC ::smcReadKeyAction ERROR THOP kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8029fa1000
-followed some instructions found online, but can execute the correct commands in SingleUserMode
tried to remove FanControl as explained here: http://apple.stackexchange.com/questions/110667/errorr-kernel-smcsmcreadkeyactio n-in-console
any ideas what may caused this and how can i fix this?
Thanks in advance

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, boot from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Mac won't boot, stuck on grey screen if the external hdd plugged in

as the title.
if i plug my external drive, via usb port, the mac won't boot and stuck at grey screen.
unplugging it, the boot process will continue.
the hdd is a LaCie mobile hdd
any help?

Hello jason(?)
It's a LaCie external mobiel hdd, formatted as exFAT. without adapter. take power directly from usb port.
i tested it on my iMac and it works fine. boot up as normal. the only difference is my iMac is on 10.6.8 and my Air is on 10.7.2
I tested on both USB port on my Air and the problem still persist.
the read/write speed is normal (bought it like a day ago).
another thing is I don't have this problem with my external WD drive.
One thing to notice is that, I accidentally left like for like 2-3 mins and it boots. So why the question now is why it's taking so long to boot? normally it just takes <20 seconds. Seems like it tried to boot from the external hdd, doesn't it?

10.6 won't boot; stuck on grey screen

I know this is covered here to some degree, at least, but I haven't been able to find a complete solution/answer, so here goes:
(Please, redirect me to the right source of information, if you know where to look, but not before reading through my post. Thanks! Oh, and I'm no computer expert, so, please, bear with me.)
First of all, my equipment: 17" iMac (serial #: w86262cru2n, emc #: 2104), running (ran?) 10.6 (w/updates)
So, as my title says, my iMac won't boot up and gets stuck on the grey startup screen with the  and the spinning wheel. I can wait and wait, but it never gets past this point.
Here are some things I've tried (nothing has worked so far; "no success" = stuck on grey screen). These steps are also laid out here.
- Tried normal startup (no success)
- Tried Safe Boot (no success)
- Tried booting without connected peripherals (no success)
- Tried alternate outlet (power source) (no success)
- Tried resetting PRAM & NVRAM (no success)
- Tried boot from 10.6 Install Disk (no success)
- Tried replacing original RAM (no success)
- Tried mounting internal drive as Target Disk on my 10.5 MacBook (mounts fine; used 10.6 install disk to verify, says disk is "ok")
- Tried booting to MacBook via Target Disk (i.e. iMac is external drive connected by FireWire) (no success)
- Tried booting from cloned copy of 10.6 disk on an external USB drive (yes, this can be done; I've done it before). This drive was verified "ok" in the same way the internal disk was (see above). (no success)
My next step appears to be to erase the original internal HD and reinstall 10.6. This is where my my ignorance begins to rear it's head. Since I can seem to boot from the iMac, can I do this through my MacBook, viz. mount the original, internal, 10.6 disk on my MacBook and erase it and install 10.6 from there (e.g. through Disk Utility on the 10.5 MacBook)?
Assuming this is possible, can someone step me through the process?
Assuming this last step isn't possible, does this all point to a faulty logic board (sounds like a 'worst case' to me)?
Any ideas? Suggestions?
Many, many thanks, BTW, to all who have posted here and whose help I've availed myself of anonymously many times. And thanks in advance to anyone with helpful ideas.

Try a SMC reset and follow the steps again in the support doc for grey screen
https://support.apple.com/kb/ht3964
https://support.apple.com/kb/TS2570
Your 10.6 install disk seems unreadable if it won't "hold c or option" boot.
Clean the bottom with a alcohol and a very soft cloth and lightly polish until there is no streaks.
Don't touch the bottom or place the disk onto something that will mar the bottom.
If the disk still fails to work, get a replacement, as your going to need it. Get a jeweled plastic case for it.
To make copies of your Snow Leopard install disk, follow these directions.
http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
Once you can hold c and boot off a working 10.6 install disk, simply reinstall OS X without using Disk Utility to Erase and Format the drive, this will replace the OS X installed (and bundled programs) with the disk versions, then reboot and immediately use Software Update to get current.
Your user files, third party programs will remain untouched, except for ones installed in OS X/root system files, those will have to be reinstalled with updated copies.
All else fails:
Grab a copy of your recent user file folders via FireWire target disk mode first or from a hold option bootable clone on a external drive
If you have to completely erase and reformat the drive, reinstall 10.6, there are some things you need to know.
1: The free iLife that came with your 10.5 install disks are not on the 10.6 retail disks
So to get that you need to select the drive makers name in Disk Utility, erase and install with the 10.5 disks first (warning, wipe entire drive)
2: Name the boot drive the same name as before in Disk Utility when formatting.
3: When you go through inital "Welcome to Mac" setup, use the same username as before, (different password)
4: Once in OS X 10.5 stick a working 10.6 installer disk in and upgrade. Once rebooted, immediately Software Update to current version.
5: Install programs from fresh sources next and update.
6: Finally, return the backup copies of your user file folders (Music, Documents, Pictures, etc., not Library) to their respective folders on the new configuration. Because you used the same hard drive and user name as before you should have little complications with things like iTunes song locations/playlists and other hard references to files on your drive.
By installing the OS first, then upgrading, then programs, then finally user files last, keeps the drive optimized as the drive is faster on the data installed first than data installed later. Since users files change size often, having them towards the end where they can grow or shrink keeps the performance of the computer up as much as possible for the OS and applicaitons. Eventually though with OS X updates it can get a bit more defragmented, but not much.

G5 start up problem: stuck at grey screen with fans running full strength

hi, i'm new to discussions, so i hope this question and my technical knowledge and descriptions will be OK: problem: G5 20" stuck at grey screen with fans running full strength..
so far i've tried but did not work:
- power off by pressing the button for 5 secs,
- checked all cables connections etc, take out the power cable try again, etc.
- removed all USB connections, re-did
- tried to use it as 'target drive' connected to my macbook by firewire
- tried to start up and keeping C key pressed
- tried to start up with 'shift' key pressed
- tried to start up with command, options, P and R keys pressed,
- i had an additional RAM, i've taken it out and tried again, no luck
- i've put in Mac OS X install disc1, no luck, and now disc is inside my iMac, can't take it out
any recommendations? thank you!

Scroto,
You may not actually have a bad processor. On the Dual G5's it's not uncommon after a few years for dust and corrosion to build up between the processors and their sockets. You can fairly easily remove the processors and clean the connections yourself if you're at all handy. Basically, snap off the heatsink covers, loosen a few screws and the processor and heatsink come out as a unit.
Clean the contacts on the processors (carefully). And clean the sockets. Be sure to put the same processor in the same place or you'll have issues.
I used 90% isopropol alcohol to clean mine last year. Let it air dry and blew both the socket and the cpu off after with canned air. That done, I reinstalled the processors, buckled everything up and no more "bad" processor... The machine worked perfectly from then on and I assume it still does today. Don't know, someone stole it last month:(...

Powermac G5 stuck on grey screen start up and fans running wild

Hi All
I also have the recurring problem all of a sudden - yesterday all seems well, today am stuck on grey screen and fans getting stronger by the minute. NOTHING works - have been through all sorts of forums and the most I got was to try disk utility - which says all is well - replaced the battery - tried just about anything short of pouring some acid on the **** thing, won't boot from original install CD either - I really need this machine as I earn my living with it and cant afford a new one and why as it was working just perfect - now this mess. In a way don't know why the excellerating fans are not built to simply pick up speed and then eat into the PC board and CPU - at lest this way we know for sure there is nothing we can do.
Does no one here know why the mac is doing this - not even the mac fundies? Unbelievable. I live in Namibia and Apple Mac support here is similar to that on this website - might as well write this on a wall - that is why I am really frustrated... **** Mac

Follow these steps in order:
http://support.apple.com/kb/TS2570
The G5 is also subject to solder failure around the RAM slots and memory controller.
It is a fatal condition, but one that can sometimes be temporarily sidestepped by heating the logic board between the RAM slots with a hair dryer.
Heat the board until very warm (hot) then start.
If your machine starts after heating, then you better just leave the machine on all the time.
You never know when the trick won't work......

Stuck on grey screen screen at start up...apparent Qmaster bug.

So I found what appears to be a bug. At least for me...and at least in 10.6. Not sure if this effects other OS versions.
I was having an issue with start up getting stuck on grey screen. Symptom is eventually start-up circle segments would stop spinning and left hanging there on the grey screen.
There are Apple doc's and ample google hits on this subject. But I have found nothing pertaining to Qmaster as being a possible cause.
It took me awhile to figure it out and was not an obvious issue.
I thought it might be helpful posting this here to bring this up on a google search for someone who may be having the same problem.
My issue:
Doing image sequence Maya render's. However, I doubt it is Maya related.
If I pause the render in the Batch Monitor. And shutdown. Something with Qmaster still being active hangs my startup. It is repeatable behavior.
I have to start up holding shift key for safe mode.
You will note, if you have 'Show Qmaster service status in menu bar', under the Advance button of QM's System Pref's pane, that the green light is on.
That green light being on, gave me the clue that it was something to do with Qmaster.
Clicking; Stop Sharing and restarting clears the start up hang.
It appears, whatever permutations Qmaster expresses with a paused render on start up, is somehow preventing normal start up.
Since I have read that menu bar items may be one possible cause for start up issues. It's also possible and therefore worth mentioning that unchecking "Show Qmaster service status in menu bar". May also resolve the problem. I have not tested that.

Issues like this are often caused by startup jobs that are taking far too long to finish. It definitely looks like a serious bug so it's worth reporting it to Apple at either of the following places:
http://www.apple.com/feedback/compressor.html
http://bugreport.apple.com

STUCK ON GREY SCREEN! !PLEASE HELP!

!!HELP!! STUCK ON GREY SCREEN
I have a MacBook 10.5. Its a few years old anyway it seemed to be working fine up until a couple of weeks ago then it started taking ages to startup.
I started it in singlemode then typed /sbin/fsck -fy then a message came up "harddrive appears to be ok" next i typed "reboot" and the system started booting.It started as normal with the apple logo and spinning chime,next the screen turns blue where the login screen normally appears but then the screen turns grey with no logo with just the pointer arrow on it and it doesn't seem to load past that point.Can anybody please help me solve this problem i have my kids photos and stuff on it that are unreplaceable.
Hopefully there's a command line that can help also I don't have a installation disk so is there a way I can download 1 onto USB??
THANKS HEAPS!!!!!

Hi Eug07349,
Thanks for visiting Apple Support Communities.
It sounds like you may be experiencing a software issue. I'd suggest trying the first two steps in this article (Disconnect, test peripheral devices and network cables, Perform a Safe Boot):
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Best,
Jeremy

My old mac powerbook g4 wont boot up, it wont show apple logo and spinner aswell just stuck on grey screen while booting please help me

i have a old powerbook g4 which i usally use to store some photos and to listen music. the battery of my powerbook is completly dead so i used to use my powerbook using charger adapter so whenever my power cuts down my laptop will be shutdown.
one day i had just bootedup my powerbook and some date notificateion poped up so i press enter and suddenly my power went off and laptop shuted down. and next time when i tried to boot its stuck at grey screen , i even cant reach the apple logo and spinner. please helppp me :!!!!!!!!!!!!!!!

Resetting PRAM and NVRAM is not working
and i cann't boot it on safemode holding shift button and while holding option or c button at startup i can only see three things 1 is refresh button, 2 macintosh HD with X under it, 3 arrow forward button please help me

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help?

My macbook pro is stuck on grey screen with apple symbol in center with the progress circle under it continusly spinning. After I had turned it on. Prior to turning it on I had to force close and shut down a few hours prior. Please Help I have tried everything I know to do

Unfortunately this means that there is a problem in the boot sector of your hard drive. It might be indicative of a fundamental corruption in the coding that allows your computer to boot your operating system from your hard drive. I had this problem twice and it resulted in me having to get a new hard drive and restore my data.
In other words, your computer can't talk to your operating system so you can't access your data.
Here is my advice: DON'T CALL APPLE TECH SUPPORT though they are kind and usually helpful it will take you an hour just to explain the situation and they will only tell you to do what I'm gonna say here.
First: Shut down your computer completely
Two: boot up while holding down the following keys: command, option, p, and r. The computer will reboot 3 times. This solution will likely fail so if you're frustrated skip to the next step.
Three: Boot up while holding down the option key. Select recovery drive. Select your default language. Select disk utility, click on Macintosh HD, and select "verify and repair volume." Likely the verification will produce some line like "unused node not erased." Or something like that. If anything using the words "node structure" comes up, you need a new hard drive.
If after verification and repairs you still can't boot I sincerely hope you have apple care because you will need a new hard drive. Set up an appointment to come in to the apple store, they will tell you to go and get data recovery, just ask them to give you the old hard drive. Unless you have an up to date backup in which case you can just restore from that. If you're lucky the only issue is with the boot sector which means that if you ask them to give you the old hard drive, you can buy an enclosure and you have effectively been given a free external hard drive. It still works to store data just not to load an operating system.
If you have a back up drive bring it to the apple store and they'll do the whole thing right there, it should take around an hour and a half but may take longer.
Hope this helps, it's annoying but it's your safest bet.
All the best.

My iMac is stuck on Grey Screen

Similar Messages

Maybe you are looking for