My iMac is too high

I'd like to remove the bracket from the back of my iMac and have it sit directly on my desk so that it's more in line with my line of sight (and I can have my feet on the floor). Are there any "U" shaped brackets that can hold my 27" iMac?

http://www.bhphotovideo.com/c/product/735912-REG/Apple_MC772ZM_A_VESA_Mount_Adap ter_Kit.html

Similar Messages

Imac temperatures ¿too high?

Hi,
I've owned my Imac G5 for about 6 months now, and the other day I had my hand placed on the top of the screen and I noticed it was quite hot for the normal. I live in Spain and its about 36º in the afternoon (96F), maybe its just the Imac facing the summer, I don't now. Anyway, I'll leave the stats of the temperatures from a widget I've got so you can know a little bit more, thanks
[img=http://img61.imageshack.us/img61/3830/tempsan4.png]

The information Chris CA gave you was absolutely accurate - if your computer gets too hot, the power supply unit will automatically shut it down when it exceeds the recommended temperature, so until that happens, you don't need to worry about it. And you are posting in the wrong place, this is for PPC iMacs, which have not been produced for several years. You have an intel and he gave you the correct forum to post in.
His information was not only correct, but useful as well, if you trouble to read and understand it instead of being snarky!

Temperature of imac '24 too high ?

http://img501.imageshack.us/img501/9958/picture3pk4.png
is this a normal temperature for my imac? im a bit concerned because this..
Thanks

Ricardo, Your temps look pretty good except for the Hard drive. By no means do you want your hard drive to run at it's maximum operating temperature all the time like that. What is your Ambient temperature? There are three internal fans in your iMac and they can be adjusted individually. One for the CPU, one for the Hard drive, and one for the Optical Drive. To adjust the fans download and install SMCFanControl:
http://www.versiontracker.com/dyn/moreinfo/macosx/31029
I've increased my fans several hundred rpms and they are still barely audible. Your default fan speeds I believe are ODD:700, HDD:1200, and CPU:1200. A few tips, the CPU fan provides cooling for the CPU, GPU, and Power Supply. It would be good if you can get your Power Supply under 60C and you want the hard drive under 50C if possible. You might try setting them like this:
ODD: 1000-1100
HDD: 1700-1800
CPU: 1500-1600
Examples:
http://ftp.georgetek.com/George/Temps_Current.png
http://ftp.georgetek.com/George/SMCFanControl.png
George

IMac Hard Drive expectations, Are mine too high?

Hey everyone.
I have a 27" iMac i5. Its around 22 months old now and its being used as a personal PC at home.
Lately, I have been experiencing HDD related issues, It hangs, load times are poor, OS takes ages to boot (windows and OSX)
I backed up all my data to external drives and did a clean OS restore to Lion. No help, first boot with the OS was just as bad as a boot full of clutter. Loading Windows on the win partition also sometimes gives me the "cannot find OS boot disk" error which is scary.
Anyway's doing research its all sure tell-tale signs of a failing HDD and ironically last night on my Win7 partition, I got the windows error message saying my "windows detected a hard disk problem, back up all data and contact your manufacture".
Now, back on topic. Is this reasonable? a $2000+ computer suffering from a hardware fault like this when the HDD has never had more than 30% of the 1TB used in its life? (everything I keep backed up on externals.)
I was honestly expecting a few more years out of this, **** even my 5 year old Macbook has never had an issue in its life and its been bagged around more places I can think of in its lifetime. How does a computer that sits on a desk suffer for a hardware failure such as this?
From day one, I had a faulty power board inside, it caused a loud electronic buzzing noise. I did not get this fixed for aroun 9 months as tbh, it sounded normal but in the last month leading upto the replacement, it got much louder over a few days. This was replaced by Apple and I was sent on my way happy it was fixed. could this have caused something to overload?
I am a little bit bitter which I am sure you can understand, but was my expectation of this hard drive just too high? or am I in my right to be a little upset by this?
And before anyone askes, I was OS when my warranty ran out, my Macbook, iPad 3XiPhones and Mac Mini are all covered by their own Apple Care. the only thing that isnt is the iMac.. just my luck!
Edit: the old link for the power board.
https://discussions.apple.com/thread/2737002

Thanks guys.
Just got off the phone to Applecare.
they confirmed my drive is faulty. Im just a little upset it died like this. I have never had a drive fail before. Id rather my externals go than the internal.
Spoke to Apple, they said that he spoke to his Tech Specalist and they would not offer a free replacement. I agree is its 10 months out of warranty, but even the Apple rep I was speaking too said he would not be impressed either if it was his personal computer
Oh well. Time to look at HDD Upgrade options! Not that I am totally impressed about it.

I have a macbook pro OS 10.5.8. I've sync'ed it with an iPad 2. I would like to access the "cloud" but it seems my Leopard isn't sufficient. How high an OS upgrade would i need to use cloud? Most of my current apps wouldn't work with a too high upgrade.

I have a macbook pro OS leopard 10.5.8. I've synced it with an iPad 2. I cannot access the cloud because my OS is insufficient. Problem is most of my most- used applications would not work with a too-high system upgrade. I can't afford to upgrade all my apps. I need to know: what would be the least-high system upgrade I can install in order to access the cloud on my new iPad 2?
MAC O.S. 10.5.8 - LEOPARD
MacBookPro
MacBookPro4,1
Intel Core 2 Duo - 2.5 GHz; speed 800 MHz
Quark Express 7.3
Adobe Acrobat 8 Pro
Adobe Photoshop CS 3
Adobe Illustrator CS 3
Adobe InDesign CS 3
Microsoft Office 2008
Extensis Suitcase Fusion 12.1.7
Stuffit 12
Thanx
calico6

Define "access the cloud". I can access my iCloud.com account on my 5 year old iMac at work running OS X 10.4.11 Tiger. I can download and upload Word documents and Pages documents in the iWorks section of my iCloud.com account.
What do you want to access in "the cloud"?
Snow Leopard would be your next system upgrade and you should be OK with the CS3 applications, and Office 2008. I cannot confirm that the other applications will work.
This is quite old, but take a look or Google the other applications to see if they are compatible with SL.
http://www.macintouch.com/specialreports/snowleopard/slcompat.html

Firmware version is too high. How uninstall? Correct version where?

Help! That Firmware thing is driving me nuts. Wish apple would organize the latest upgrades by OS. It’s a maze.
My iMac DV (blue front slot loading) is OS 9.0.4 (I will upgrade but not right now, too long to explain).
I had bought a LaCie HD some years ago & made partition with OS 9.0.4, 9.1 to 9.2, it fell, bought another and installed it.
After much time I found out that to know my version of Firmware I have to look for boot ROM, my system profiler says it’s $0004.19f1 that means probably v 4.19.
If it’s v 4.1.9 it is too high it needs OS 9.1 and probably happened with I had OS 9.1 on my external HD. My LaCie CD Writer became a nightmare and I don’t dare to use it anymore, maybe it was because of the firmware ….or it might be that Apple CD/DVD Driver can’t exist at the same time as Toast extensions, it’s unclear to me.
Can’t find the latest firmware version for OS 9.0.4 that will work, or how I can take it off before I install another one. I know v2.4 will work on OS 9.0.4.
Got: Firewire v2.3.3 - usb v 1.4.2 - CarbonLib v 1.6 - Apple CD/DVD Driver v 1.3.5 player is v2.1
Help!
1. What’s the latest Firmware for OS 9.0.4?
2. Do I have Firmware v 4.1.9?
3. How do I uninstall Firmware v 4.1.9?
4. CAN Apple CD/DVD Driver exist at the same time as Toast extensions?
Thanks very much
Nicky

I think that you misunderstood Kappy's point about Mac OS X version.
What the information about OS X version is telling you is that those are the minimum requirements for the installer which places the firmware update permanently in the ROM on the logic board to run. However, once the firmware has been installed you are free to continue to update your version of Mac OS X for as long as Apple releases them.
I have an iMac G3 DV+ which has ROM version 4.1.9f1 and is running Mac OS X 10.4.8.
However, the firmware is backwards compatible as well. You obviously installed the firmware when you were running OS 9.1, but at some time regressed your OS to 9.0.4.
I think the issues that you are experiencing are related to other issues on your Mac. The folks in the iMac G3 forum should be able to help you sort that out.

Is 1600 RPM too high for fans?

The default fan speed is 1400 RPM but when I play games I turn it to 1600 RPM using SMC Fan Control. Is that too high?

That is why I only advise a max range for the fans for people setting the IMac fan speeds, manually.
But you cannot advise a max speed in isolation, as you have. It all depends on the default speed. 1,400->1,600 is only +200, while my default HDD at 1,100, which I may push up to 1,600 is + 500.
Anyway, it's mostly guesswork. No one really can say how fast is too fast. And no one's going to do any trials to find out at what speeds and for how long running at those speeds will premature aging of a fan motor likely begin.
And there's also the tradeoff of increased dust input from higher fan speeds to consider.
I have a window fan that's 40+ years old and still going strong (cheap shaft bearing), mainly because I have an electronic variable speed control which allows me to set it at the lowest necessary speed, plus I oil it periodically--something you can't do with an iMac fan.

Since i upgraded to Yosemite, my iMac is too slow

Since i upgraded to Yosemite, my iMac is too slow. For example, at the starting up, it needs minutes 34" to open.
When i open a window / folder, i need between 1 and 2 minutes. By opening a pdf or an other document i uses 2 to 7 minutes.
WHY? How can i change this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Is 95C CPU temperature too high?

I have Intel Core 2 Duo iMac. When I use QuickTime or any other video converting software to convert video for my iPhone CPU temperature hits 95C mark. Is it too high? Should I do something about it. If yes what should I do? It is the only situation when CPU temp is so high usually it is not higher then 70C when loaded.

Hi,
thats normal that the CPU of an mobile system gets hotter, I mean your much more near the CPU then by an desktop. Thats normal that you could think the CPU gets too hot.
I have an Satellite X200 (Gamer machine) and the thing gets really hot, but thats normal since a powerful CPU is in there.
If I were you I wouldnt make any doubt about it and if youre unsure just ask some of your friends which owns a notebook. Usually they would say "yes, mine gets hot, too.."
The 100 degree means that the CPU can become such hot till it reaches 100 degree and then the machine shuts down to prevent to some damage on the CPU.
So in this case the 70 degree are okay. You (can by the way) prevent overheating when you clean your machine regurarely simply by blasting some compressed air gently through the ventilation holes of the CPU cooling system. If not then the cooling modules will be clogged from dust and start to overheat...
Greets

Error message Translational currency is too high when posting GR for a PO

Hi,
I am trying to post a GR for a PO,with document currency say in GBP and local currency in EUR,when i tried to post a GR the system gives the message with-"Translational currency is too high" and also the value updated for previous GRs(for a qty 10) is vary high like 37,056,361,610.68 GBP,just i want to know how this value is picked by the system,i know exhange rate table maintained is plays important role,but the value i am getting is too high which is not at all related with rates we maintained in the table TCURR.
I want to know why system is giving such a high value.
further PO quantity is 17,000 and net price is 1 GBP.
we have posted very sucessfull GR earlier,but now this high value and error in GR we are facing.
with regards,

Hi,
Good afternoon and greetings,
Wishing you a Happy New Year 2007
Please go through the following OSS Note
Note 191927 - Posting logic: GR for foreign currency PO
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Error Rounding Difference too high when reset cleared document using FBRA

My Client has posted cleared document with T_Code F-51. This cleared document has cleared 6040 open items.
And now, they want to reset and reverse that cleared document.
We found error "Rounding difference too high" when we are reset cleared document using FBRA.
Kindly need your advice.
Many thanks in advance.
Regards,

Hello,
Please let me know the ERROR number.
Regards,
Ravi

When I print business cards, they sometimes print 1/4 too high but not always.

I have my business cards in a Word document using an Avery template. I have used the same file for years. I never had a problem with my Canon printer but after buying an HP Photosmart D110 I have had nothing but problems. When I print then they print about 1/4 inch too high ruining the cardstock and wasting ink. This doesn't happen all the time. Sometimes I print and they are perfect but when I go back and print another, the problem returns. This is the same card stock I have used for years and when it is inserted in the printer it doesn't matter if it is a single page or a stack of them. I have tried previewing the page before printing and the alignment is correct. I've tried printing to a PDF and then printing the PDF, same problem. I try it on the Canon and no problem. Only reason I bought this in the first place was the cartridges were cheaper and I do a lot of color printing and scanning! I have just replaced the cartridges and did a head alignment so that is not the problem. I have tried it with regular paper and the problem persists. I'm ready to drop kick this thing and buy another Canon!
This question was solved.
View Solution.

Did you ever find a solution for this problem? I have no problem printing the business cards out on a Canon printer, or a different HP printer I used to have, but the D110 is nothing but a pain in the you know what ! I'm using publisher and the avery 8371 card stock, I searched solutions for days and did everything possible but still they're not printing correctly!! I'm dissapointed in this printer, every time I have a problem with something it always seems to be an HP product!!! Very frustrating because I never had to mess with any settings in the other printers I had, I would just put the file in, change the quality and click the print button with no problems. I'm ready to throw this printer out the window Anyway thanks in advance and I hope somebody can help me with this issue !!!

Trying to install OS X Yosemite but it keeps failing - how can I tell if my iMac is too old? Currently running on OS X 6.8

Trying to install OSX Yosemite but it keeps failing - how can I tell if my iMac is too old? Curently running OS x 10.6.8

Hold on.
7,1 is a mid 2007 model (20 or 24")
It can run Yosemite, make sure that you have at least 4GB of Ram.

In reply to MK re: print too high...

MichaelKazlow:in Re: print too high;
I'm using A.Reader v.9.3.4 in XP.3 and Officejet J4540 series; I do think you are on to something with print preview composite showing Zoom 94% & page set to 8.27 x 11.69" but where to change to 8.5 x 11 inches since the zoom @ 94% does not jibe with over 11 lgth X less than 8.5 inches which would seem logical if the 94% issue were the trouble...please expound ~ Jaye ~

I'm not on Windows now, but the Windows dialog box is similar to the Mac Print dialog box.
You can see under Comments there is a Page scaling dialog box. Click on the drop down menu and switch from None to Shrink to Printable Area.
If you need to continue this discussion stay here or the original thread (at this point here might be better). Do not create yet another thread.

My macbook pro cpu temperature is too high??please tell me correct fact and information

i mistake deleting my activity.......re question...
I'm using macbook pro retina 13inch 2013 late version.
my macbook has NO external graphic card, just iris graphic.
when i was playing diablo3 or watching movie by using bypass ip address, my cpu temperature was maintained 90~100 celcius degrees.
And at the same time, my cooling fan was maintained 5800~6000 rpm.
There are two questions.
One, is my macbook temperature too high or normal level ?
Two, i know that 6200rpm is maximum speed of cooling fan. Why did fan run 5800~6000rpm, not maximum?

When processor intensive activities are taking place, temperature may reach the maximum level.
     Reset SMC.     http://support.apple.com/kb/HT3964
     Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

My iMac is too high

Similar Messages

Maybe you are looking for