My iMac isn't detecting the sound device

I've not had a single problem with my iMac since I purchased it... until now. For some reason, my iMac is not longer detecting the audio device. Several forums suggested plugging in a set of head phones for testing purposes. I have done that, but still have no volume control. The speaker in the top right corner is light gray, and when I try to do anything using the keyboard controls, I get a speaker with line through it.
Does anyone have any suggestions?

I have been having fun and games trying to set up a dual-band Airport network with the old AEBS and the new AEBSn so know what frustrations you are going through. Some of the options that have helped me include:-
1. A quick reset y pulling the power cord from the AEBS waiting a few seconds then putting it back in helps - then click on the Airport scanning symbol on the top right menu bar, then Join Network, Show other networks and it often finds it.
2. If no go then reset the AEBS fully by putting in a paper clip to the small hole then plugging in the unit to the power and waiting about 15 seconds until it flashes. Then start again with the Airport setup.
Best of luck
Mike

Similar Messages

[SOLVED] GStreamer was unable to detect any sound devices

In my experiments to get the headphone jack working my my Mac Pro, I have managed to break the audio system. That's often the result of experimenting towards solving a problem.
I get this error when attempting to open the audio mixer panel.
"GStreamer was unable to detect and sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem."
I suspect that the audio drivers have been corrupted during my experiments. How do I restore them?
Last edited by AnalogKid (2015-03-22 16:01:50)

Solved with
pacman -S linux

How do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.

how do i use the headphone jack as an input on a macbook pro 9,2.... the option just isn't in the sound app.
all i have is the internal mic option, can anyone help?
thanks

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

KT4 Ultra, I can install or detect the Sound Card.

I have a KY4 Ultra, model MS-6590 (v1.X), G52-M6590X6.
I can install, or detect the sound card. In the manual I found an option to enable or disable the Audio Controller, but in my MOBO, I can´t find this option.
The Windows 98SE can detect the Multimedia Card, and I tried to install manually with the "Drivers CD", but in the begining of the instalation, appears a message saying that there can detect the Sound Card.
What can be that ?

Quote
Originally posted by maesus
Do you mean in your MOBO as in hardware? The option to enable/disable the audio controller is inside the BIOS settings. Press DEL when you see the POST screen should lead you to the BIOS settings.
Where in the BIOS? I certianly cannot find it on my 6590 v4.0 board.

Unable to change the sound device to your selected device. Please he

Hello,
I have the Audigy 2 ZS notebook and everything has been working great. I was just fooling around and I had my speaker settings on 4. as that's the amount of speakers I have. I thought I could try changing it around and I accidently selected 7. in the speaker selection. This caused the program to crash. I tried ending the speaker selection from the processes in the Task Manager but that does not work. So I have to reboot but here's the serious problem: I'm not getting any sound anymore, not from my speakers nor from my headphones.
Please help as I really need some sound. Should I take it out and reinstall it's Is there a way to restore default settings in the EAX console so I can at least change it back to 4. Thank you.

I am having a very similar problem only it happens whenever I try to open any of the creative sound programs ie: speaker settings graphic equalizer etc.. I get the "cannot change the sound device to the current device" I have to hit ok like 6 times cause it just keeps popping up over and over then just goes away, only diference is I dont lose my sound it just wont let me go into any of the creative programs.

In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

In My IPhone the sound device not working properly. I can here the sound through head set only.kindly send an idea ti solve this problems

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

Iphone can detect the paired devices but can not connect

My iphone 5 can detect the paired devices but once I enter the pin code It will not connect.

I was wondering what the Renew Lease button did, that is why I never tried it before. I just tried it now and no luck. It still is not connecting. I have had this phone for almost a year now and this has never happened before.
I appreciate the effort anyways.

IMac doesn't detect the base station correctly (with new base station)

I have a brand new Airport Express. I'm trying to connect to my iMac G5. Everything works fine in the start up with getting the green light on the Express base station. But, my iMac doesn't "connect" with the base station.
I try the "Airport Setup Assistant" and get a window that says "No new Airport networks were found."
I look at the "pie" at the top of the iMac screen. It has the white and black stripes on it. I click it and find "Apple Network e3fec9" and select it. The signal level shown has all blue buttons. That window also reports "Status: Connected to 'Apple Network e3fec9'" and "Base Station ID:00:19:E3:E3:FE:C9". That's what makes me think that my problem must be in the iMac and not the base station.
I had also tried my Dell laptop (from work) and found that it found the internet network. It detected the "local host" and "Apple Network" and the signal strength was very good (~90% or so). The only problem was that the laptop thought it needed to recreate an IP address before it could connect to the internet. I didn't do that, since I saw it was detecting the network.
Please help. Why should this be so hard?
iMac Mac OS X (10.4.9) none

I'm confused. You say you're connected to "Apple Network e3fec9", and you're having trouble connecting your iMac? It sounds like you've managed to connect to your Airport Base Station.
Have you configured the Internet settings for the base station? Try this:
1. Launch Airport Admin Utility (in /Applications/Utilities/) select "Apple Network e3fec9" and click Configure.
2. Under the Airport tab, give the base station a name, click the Base Station Options… button, and make sure Enable Ethernet Port is checked.
3. Select Create a Wireless Network (Home Router) if it isn't already selected, give your network a name, and check Create a closed network
4.Click the Wireless Security button and set it to WPA Personal, and enter a password.
5. Under the Internet tab, set Connect Using: to Ethernet, and in the Configure dropdown, select Using DHCP
6. Click the Access Control tab and click the plus button on the right side of the window. In the panel that pops up, click the This Computer button.
7. Click Update
I'm hoping it's something simple, like Enable Ethernet Port wasn't checked or something, and not something more serious.
Hope it helps.
Rob
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)
17 iMac G5 Mac OS X (10.4.2)

IPhone 4s won't sync to iMac, isn't recognized as a device in iTunes or iPhoto.

my iPhone 4s is not recognized as a device in iTunes or on my iMac. Doesn't show up in Wifi cloud sync as a device either. It's charging now via my iMac so the USB cord is good. I am on iTunes v.11.1.1 and Mac OS X v. 10.8.5. All other SW updates complete on iPhone and iMac. Also, when connected to iMac, iPhoto doesn't pop up asking to import the photos, which I need to do because I have so many on my iPhone and my memory is almost all used up.
Also, I think the iPhone is the issue NOT needing to uninstall and reinstall iTunes because of the memory issue and I have had the issue of the sound not working when playing back video and the sound has had weird issues which I've read about and think about a month or 2 ago I triggered where ther is a shut off safety precaution for when moisture might be in the iphone after I ran with it one night and wondering if the connector where the USB is plugged in is the problem. However, that wouldn't explain why it doesn't show up as a device in my iTunes when used as WiFi and not via a USB cable right?
I am afraid if I go back into the Apple store even though this one was replaced in March they will charge me to replace it again and then the next time I can upgrade to get an iPhone 5 will be extended (again).
Next I'll go checkon the support and whether I bought the extended warranty. Since this is the 1st replacement from my first iPhone 4s, would a 2nd one keep the same Apple warranty on the device or is it the same length?
I cannot afford to replace it now if they will change me for it, but I also but wish they'd allow me upgrade since I was due to be upgraded in Oct. 2013 and now it's not until March of 2014! So, if i have to replace it with this a 2nd time, would my upgrade be pushed to OCTOBER of 2014? I don't recall their terms since I haven't had to replace mine so many times before, so haven't paid attention.
Going to research T's and C's of Apple Care/warranty and extended Apple care now.

Another thank you here ... I was ready to go to the dark side!!

IMac doesn't detect the keyboard

Hi,
I just replaced the batteries of my blootooth keyboard, it powers up just fine (I have also tried it with another mac) but my iMac doesn't detect it - so I cannot log in. Can anyone help me? I have tried to turn iMac off and unplug all cords but it doesn't help.

Hi, plug into your computer any USB k/b - Login, go to System Preferences -> Bluetooth -> hilite your BT k/b & Mouse -> Use the (-)sign at the bottom of the open window to delete items..
Restart your computer -> Repair Permissions & then set up your BT k/b & mouse...L

How to detect the installed device name

Hi,
I am using Labview 8.5.
I need to display the device name installed in my pc.
I have a PXI chassis with DAQ,Digitizer and function generator card.To display the DAQ device name used the "DevName" property of DAQmx driver.Similarly to display the Digitizer and function generator card name which function do we need to use.
Please tell me how to do this?
Regards
Meenatchi

Please see the attached zip of VIs.
- Partha
LabVIEW - Wires that catch bugs!
Attachments:
Detect Installed Device Details.zip ‏131 KB

Hi! I want to connect my Jabra easygo Bluetooth device with my iPad but iPad is not detecting the Bluetooth device

Hi! I want to connect my Jabra easygo Bluetooth device with my iPad but iPad is not detecting the Bluetooth device

Hi Usmanfarooq83,
Here is an article of troubleshooting for bluetooth devices and iPad:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers!
- Ari

Bluetooth cannot detect the remote device

hi all,
I finished the Midlet code using bluetooth adaptor on my PC to search the remote bluetooth device, but when I run it, (Eclipse 3.2, JAVA JDK 1.5, SUN WDK 2.5), it can identiy the local bluetooth, and giveback the address, but it cannot search the remote device.
actually this program can run on a cell phone with JSR 82 API, is there any different? should I add some code to identify the serial port? I set the local bluetooth on COM 6 and remote device on COM 7 through a Bluetooth software which is provided by vendor.

Hey!!
I experienced similar error a week back. Pal i got to know that Java cannot access the windows blue tooth protocol stack. So there seems to be a solution called bluecove get it from benhui.com and im unable to get it worked. So if u find any solution mail me to [email protected] and i will keep you updated thanx bro!

My iPods internal speaker isn't working, the sound works with headphones but now without. I've turned it on and off several times and pulled the headphone out and put them back in but nothing seems to work, please help?!

My sound usually works but just yesterday it totally just stopped. The sound is turned on full, the headphones are out, and I've tried turning it off then back on but it didn't help at all. It's an iPod touch 2nd generation, 8G.

Try the following to rule out a software probleM
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPodIf you still have the problem you likely have a problem with the headphone jack in the iPod. They can be replaced. I would make an appointment at the Genius Bar of an Apple store to identify/determine the cause.

My iMac's Bluetooth isn't detecting the Wireless KB nor the Magic Trackpad.

Hi All,
I've been trying to pair my Wireless Kb and Magic Trackpad with my 24" iMac but with no use.
I've went to the preferences of the bluetooth and tried to detect them but it just can't find them, also I've tried to connect the phone to it (just to see if the BT works) but even that isn't found.
I have the latest OS and I don't know what's the problem.
Please advise... Thanks.

There are two known cures for this problem, documented on other threads that you can find by searching for "magic trackpad."
1. Uninstall USB Overdrive, if you ever installed it in the first place. It comes with an uninstaller, which you should run. But the uninstaller doesn't remove everything, so you have to search in the Finder (with system files included) for any file with "usboverdrive" in the file name, and delete them. Then reboot.
2. The problem may recur shortly after removing USB Overdrive. If it does recur, or if you never installed USB Overdrive, do this:
Shut down your Mac, unplug the power cord, unplug the USB cable from all USB devices, wait a minute or two, plug the power cord back in, start up, then replug all USB devices (the last step will give you back control of your keyboard and other USB devices). Maybe you should shut down and restart again, but I don't think you have to.
Here's the explanation for step 2: On many Macs (maybe all Macs), Bluetooth is handled through a USB driver. For some reason, the USB Bluetooth driver can become disabled. The symptom is that the Bluetooth preference pane no longer appears in System Preferences or, if it does appear, a line of text at the top of the Bluetooth pane says something like "Name of device unknown." In addition, if you had the Bluetooth menu item set to show in the menubar, it appears with a squiggly line through it, and its only menu item says something like "Bluetooth: not available." After you apply the cures described above, the Bluetooth preference pane will once again appear in System Preferences and work correctly (once you re-pair your Magic Trackpad, if you have to do that), and the Bluetooth menu item will function normally. You can also verify that everything is working correctly by running System Profiler and selecting Hardware > USB. When the Magic Trackpad is working correctly, you will see that one of the USB drivers is described as the Bluetooth USB driver. When Magic Trackpad is not working, the Bluetooth item is missing from the list of USB drivers.
Another symptom, in my case, was that when the Magic Trackpad stopped working, iTunes stopped recognizing my iPhone 4 on its third-party USB charging stand. When I applied these cures, iTunes once again recognized the iPhone. I'm guessing that any USB device might become flaky while the Magic Trackpad isn't working, perhaps due to interaction unique to your particular setup.
I have reported all this to Apple on the developer bug report site, and Apple has responded with interest. So I think they're on it.
Hope this helps.

My iMac isn't detecting the sound device

Similar Messages

Maybe you are looking for