My IMac just stopped recognizing my Iphone and Itouch when I connect them? Any idea why?
My IMac just stopped recognizing my Iphone and Itouch when I connect them? Any idea why or how to fix this?
Did You upgrade iOS on the iPhone and ITouch?
It might be that you now need a new version of iTunes for the new version of iOS.
I am guessing here because you did tell us very much to go on.
Allan
Similar Messages
-
I have iPhoto, iOS, etc. all up to date.... however my iPad, iPhone, and Mac PhotoStreams all contain different pictures and aren't the same. Any ideas why? I'd rather not reset the whole thing if I don't have too.
OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
Also I am assuming you have checked Finder - Preferences - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount..... -
Imac not showing the contents of my classic iPod and iPad when i connect them to the iMac?
imac not showing the contents of my ipod classic and ipad when i connect them to my imac?
That's not much to go on.
What operating system and version are you using? Are you using the most recent version of iTunes? If so, did you update prior to this happening? What other changes might have triggered this? What troubleshooting have you done already and what was the result? -
I am selling an iPad and cleared its contents and settings as given in other exchanges on this site but when I downloaded a new app on my iPhone it appeared on the iPad. Any idea why?
Sounds like you did not set back as new, or if you did you reset the iPad with your Apple Id again.
If it had been reset back as new it would have stayed at the Begin Setup screen, and you wouldn't have been able to see any Apps being downloaded, as you wouldn't have acccess to the Home Screen yet.
Follow Diavonex's post to restore the iPAd back to factory defaults, and that's it. It should be back to the Setup screen, without any Apple Id associated with it, and no Home screen visible. -
My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?
I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.
-
ITunes is telling me it can't sync data from my iPhone or iPad at the moment. Any ideas why, please?
IiTunes is telling me it can't sync data from my iPhone or iPad at the moment. Any ideas why, please?
Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.
-
I have V 5.0 but the App Store says it has 5.2.2 and that it's installed. Any ideas why I cannot open the document, please?
When you updated to Mavericks and qualified for the free iWork apps and then installed them, the old iWork apps were rounded up and put into a folder name iWork' 09 and the three new versions of the apps are scattered in the apps folder in alphabetical order.
-
My macbook pro keeps crashing and emitting a beeping noise when it does. Any ideas why?
my macbook pro keeps crashing and emitting a beeping noise when it does. Any ideas why?
3 beeps = no good banks. You will have to go to the Apple Store for immediate service. If you would rather do it yourself, go to https://selfsolve.apple.com/GetWarranty.do. If you want Apple's help (without having to go to the Apple store), go to https://expresslane.apple.com/GetproductgroupList.do?PRKEYS=SG1.
-
Hello i made a site using the 3 platforms: desktop, tablet, and smartphone but... on tablets and smartphones appears the desktop design, any idea why?
Vivek,
I've checked the "Redirect from Desktop" and after uploading the website into the hosting account, it still appears in the desktop version. Would you please take a look at this? I hope you can see what I've missed. Thanks.
Initial BC version during construction: Oklahoma Immigration Attorney- Jonny Randall. Immigration, Criminal, Divorce, and Bankruptcy Defense
Uploaded version into hosting account: Oklahoma Immigration Attorney- Jonny Randall. Immigration, Criminal, Divorce, and Bankruptcy Defense -
i have just purchased a new ipod classic about a week ago and it wont play certain songs/albums and stops them halfway through the track. if you fast forward past the spot it plays and it plays perfectly on itunes and on my old i[od. any ideas?? HELP
Since the iPod is only a week old, I would consider returning it to Apple or wherever you purchased it from and showing them what is happening. If they decide that the unit is faulty, they'll swap it out for you at no cost.
B-rock -
I use my iPad for music when i teach my dance class. The default layout in the music program on iPad is: song title, artist and album. I need the name of the dance, so in iTunes, I right click on the song title, then choose "get Info". I then edit the info and under album title I write in the dance name. Then when i sync the iPad still has the same three columns, but the info i need displays under the album column. UNTIL i upgraded to ios7 and installed the latest iTunes. When I synced last night, after adding new music, the songs that were already in the playlist, stayed the same. ALL the new songs were placed in the playlist but none of the info that i edited synced. It shows it as i want it when i look at the playlist in iTunes, but it does not carry over after the sync.
I hope this makes sense and does anyone have any idea why?Amazing! I'm a dance instructor and am doing the exact same thing as you - and not seeing what I need on my iPad Air ... I can't believe there has been no reply on this! I also can't believe there isn't an easy way of seeing track info in the iPad or iPhone but I've spent hours searching and am not finding anything
-
I am using the same credit card, and when I download an app on my PC in iTunes it loads fine, but using the same card on my iPhone 5 it declines any purchases. I have checked the card, re-entered it and checked the billing zip code. Any ideas why this is happening?
Hi nezniezken!
First of all, Explicit tags will only appear if your music or song is downloaded via itunes on ur idevice or itunes app.
For example, your friend downloaded a song from itunes with an explicit content and you get or copied it to transfer to your idevice also... itunes application (pc or mac) will read it as an explicit one, but in your idevice it will not, unless you log in the apple id email account your friend used to download or buy the song to your idevice and download the purchased song. in that case u'll get the explicit tag
Using metadata, mp3tags, or any softwares that adds "explicit tag" will only be read by Itunes app. but not on your idevice.
Ways to check if you have a purchased music or song from itunes.
1. All music from Itunes are M4a or AAC file.
2. There should be a "Purchased By" and "Purchased Date" including the "Email (apple id account) and name" used for downloading the said song or music.
(Right click the song from your library, Click Get Info and you should see it.)
*If you have a friend telling he/she has a song bought from itunes and it is an explicit one, you will know the truth. If it has Explicit tag on his/her idevice then its bought from itunes, but if not.... he/she is lying.
*If your friend bought a song from itunes and you tried to copied it (an explicit song for example) you will also see the "PURCHASED BY" PURCHASED DATE" "EMAIL AND NAME" etc. but u will not see the Explicit tag once you put it in your idevice, but itunes app will read it as an explicit one,
There are many sites that are doing piracy, meaning... they are buying the song/album from itunes then upload it over the internet so other people may download it.
I hope i helped you nezniezken!
-EveShanelle -
Every time I click an app the app opens and then closes right away. any idea why?
Every time I try to use an app when I click on the app it opens and then closes right away. Any idea what I can do to fix that?
Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
Hello - When I stream Netflix from my Ipad, I only received black and white TV reception?? Any thoughts why? Thank you, Jackiedd
Nope. It will reset all settings. For fix errors.
Or you can try Logging out and Restart your iPad and Sign in again. -
I download OSX mountain Lion and my mac is very slow.Any idea why?
After downloading mountain lion my mac gets slow...any idea why?
Try this:
Boot into Safe Mode then reboot normally. Do the following:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Does this help? If not, then you should reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
Calling stored procedure from a column in report
Hi All, I am new to APEX. I did a search on this forum but couldnt get an exact answer. I know how to call or execute a stored procedure from a button. like create a PL/SQL anonymous bloack and asssociate it with the button. my issue is a bit differe
-
Classes are not visible to each other in a same package
Hi, I have a question. How to make all classes in a same package visible to each other? For example, I have two classes below, T1.java and T2.java: Below is T1.java package thesis; public class T1 { public T1(){} public void func1(){
-
I've never used any Data Guard protection mode except Maximum Performance before so please forgive me if my questions seem ignorant. I have a primary DB with 2 standbys both currently operating in maximum performance mode. The primary is a 2 node RAC
-
OK...I'm close! I got a package to build, but even though I changed EXTRAVERSION from -ARCH to -RT I get this error when trying to install: kernel26rt: /usr/src/linux-2.6.21-ARCH/include/sound/cs46xx_dsp_scb_types.h: exists in filesystem kernel26rt:
-
Check Point VPN and local wireless network
I need to use Check Point VPN to access a client's remote network. Now I cannot access my wireless printer or AirPort base station, even when I have disconnected and shutdown the Check Point client. I have removed the Check Point startup items from L