My imac keeps ejecting my discs, wont burn anything either

my imac keeps ejecting my discs, wont burn anything either

Are these CDs? DVDs? or both?
Have you tried using a different brand of disks? Some work better than others.
Does it eject all disks or only some? Only blank disks or some that have already been made? Commercial disks or burned?

Similar Messages

My imac keeps ejecting discs and wont read them

my imac keeps ejecting discs and wont read them

I did not ask for the full serial number. Anyway, you are the 7th week of 2008, unlikely that is a PRAM battery issue.
Since your machine isn't under warranty, I'd try a CD cleaner that supports car stereos, like this one from Radio Shack online, but only if Apple Authorized service technician says it is safe:
http://www.radioshack.com/index.jsp?productId=2361963
This being a user to user forum, I can't say if it is or isn't.
Or you can buy a supported external optical drive, like the various ones from http://www.macsales.com/
Internal optical drive replacement is complicated, and possibly covered on http://www.ifixit.com/

IDVD keeps ejecting my disc before final burn can anyone help

My iDVD movie keeps ejecting the disc before the final burn what can I do

• Material used: Video-Codec and Photo file format and Audio file format - matters too. I use
- Video - StreamingDV .dv or AIC
- Photos as .jpg (only)
- Audio as .aiff 16bit 44.1kHz or 48kHz (ONLY - never .mp3 or directly from iTunes - all converted to .aiff first)
With this I do not mean any setting in iDVD - BUT the raw material used in iMovie / FinalCut / Avid 100 / Adobe Premiere
As this usually matters - later in iDVD
How did You Export from Video-editing program used ? I prefer
• iMovie HD6 - just drop the movie project icon (NOT iMovie Icon - the PROJECT one) over into iDVD big menu window (avoiding - drop-zones as they are for other tasks)
• iMovie'08 to '11 - Share to MEDIA BROWSER - AND AS MEDIUM - not HD or other resolution as iDVD does a bad downscaling job.
• iMovie'13 (version 10.0.x) - Share as 480p - Import this into iDVD
• FinalCut (Pro or Express) - Export as QuickTime .mov - NO QUICKTIME CONVERSION - IMPORTANT
• Adobe Premiere - I don't know - not tested Yet
• Avid 100 - I don't know - not tested Yet
Cleaning the DVD-burner - If it Burns DVDs OK then that's may be not the problem - But if it only burns CDs OK then either the DVD-burning-laser is dirty or broken.
It is very easy to kill this DVD-laser as it over-heats if one burns several DVDs in a row. I only burn three at a time - then let it cool down for 30 minutes till next batch of three DVDs.
Yours Bengt W

MBP 17" EJECTS DVD DISC WHILE BURNING 2X SPEED ERROR CODE 080020063 BY LW

MBP 17" EJECTS DVD DISC WHILE BURNING AT 2X SPEED ERROR CODE 080020063 BY BIGHANDZ

Thank you. This has worked, but I don't know why as it isn't anything I didn't do the last time. What a difference a day makes.
Once again, thank you for taking the time to help.
Jim

IMac keep ejecting my 2TB external HDD but in safe boot mode it is totally fine. How to resolve the problem?

Hi,
I have WD 2 TB external HDD. It has two partitions, one I use for my time machiine backup and one for my personal files and documents. Recently the iMac keeps ejecting the external HDD as soon as it gets connected to the iMac. I tried to reboot the computer in safe boot mode (by holding down the shift key at startup) and found out that problem is not there anymore. I can access my external HDD there and it never ejects the HDD.
It seems like the HDD is fine, the problem is with the iMac. Can anybody please give any solution to this problem?
Thanks!

Thanks Allan for your reply!
It makes sence that there must be some log in /start up item which is causing this problem. I went System Preference>Users & Groups> Login items> disabled all the items there to make sure, and restarted the computer but the problem is still there
Is there any other way to stop/configure the log in items?
Thanks again!

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now.

I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc. It started to install the first time and said it needed to restart to finish, restarted but ejected the disc. It ejects every time now. I've also installed the 10.5.8 combo update but that didn't help it. I've tried restarting the macbook with the disc in, holding c, all that. Why won't this work?!

Zap the PRAM and Reset the SMC, then try again.

My imac keeps ejecting cds (new ones). Fixes anyone?

My imac keeps ejecting cds (new ones). Fixes anyone?

Check Finder > Preferences > General
Make sure CDs, DVDs, & iPod is selected.
And check your settings in System Preferences > CDx & DVDs

I am trying to install a language disc. I clicked on the installer. It ran for a long time without installing. I click stop installing and it says it is stopping but is doing nothing. I am unable to eject the disc or stop anything.

I am trying to install a Portugese language disc. I clicked on the installer icon and it said it was installing, but it ran forever without doing anything. I clicked "stop installing" and it says "stopping", but it is doing nothing. I am unable to eject the disc or do anything because it says an operation is in progress.

Please provide some info on the disc, where it comes from, who made it, etc. Also tell us what version of OS X you are running.

SuperDrive on iMac Keeps Ejecting Discs

I've been having trouble with my early 2009 iMac's SuperDrive. Recently I'd been having trouble reinstalling a 3rd party app after ML upgrade, and the install CD was getting stuck. I did have to pop it out manually using a card to gently make it come out. Now the drive will only eject every disc I try to insert. Is the drive toast, or is there a way to koax the drive to take discs again without having to open the iMac? It's obviouosly out of AppleCare, so if I have to replace the SD, what should I get, and how much can I expect it to be to get someone to install it? This has been one **** of a computer and I want to keep everything on it running right, even with its age. I just need it to last about 2 more years, then I will be looking to upgrade. Also as an aside, will the external SuperDrive work on this kind of iMac? I know it's meant for use with the MBA and other notebooks, but I am curious if that could be an option for me in this situation. Thanks!

I can't find any specific info...
Apple reports that the slot-loading 8X "SuperDrive" with 4X double-layer burning (DVD+R DL/DVD±RW/CD-RW) "writes DVD+R DL discs at up to 4x speed, writes DVD-R and DVD+R discs at up to 8x speed, writes DVD-RW at up to 6x and DVD+RW discs at up to 8x speed, reads DVDs at up to 8x speed, writes CD-R discs at up to 24x speed, writes CD-RW discs at up to 16x speed, [and] reads CDs at up to 24x speed."
http://www.everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.66-20-inch-al uminum-early-2009-specs.html
I think the matching the SATA speed is the most important factor.

Disc keeps ejection when trying to burn audio cd

Trying to burn a playlist to audio cd and the disc keeps ejecting. Have done this with no problem before, but since upgrading itunes have this problem. Any help appreciated

I have the same exact problem trying to burn a disc with iTunes using an external CD/DVD drive. I'm also running OS 10.4.11, but on a 1.83 GHz Intel Core Duo Macbook with 2 GB RAM. My external drive is a Samsung SE-S084C/RSBN.
Has anyone out there found a fix?

IMac G5 ejects software discs before loaded

I tried to load new software, but the disc drive (while it sounded like it was working) ejected the disc automatically. I've also had trouble getting the iMovie to multiplex while burning - it keeps ejecting because of an error. Don't know if the 2 are related, but it appears there are problems with the disc drive. Any suggestions?

What is the model of your iMac? Could be that the optical drive is failing, if you are technically inclined, you can replace it, if not, contact [synaptech.com] for help.

Dvd keeps ejecting during multiplexing and burning in idvd

Ok, I realize a lot of other people have had this problem and somehow managed to resolve it. I have done a lot of reading and experimenting but so far NOTHING has worked. So, to recount everything that I have tried and all the details to this problem:
First of all, I would like to mention that I have successfully burned a number of DVDs in idvd in the past. Then suddenly it just stopped working.
I have run a verify/ repair disk permissions. I have deleted all the idvd files off my computer, the .plist and preferences file, restarted, and reinstalled iDVD TWICE with a custom install. I have 500 gb of free space on my boot drive. I used a cleaning disc on my SuperDrive, and my regular DVD player. I switched to a better brand of blank dvd. I am now using Sony DVD-r, 4.7 gb discs although memorex DVD+r always worked just fine before. The project I am burning fits on the disc. I am not using chapters. I tried turning on the tv safe area and made sure everything was inside it, but still the same problem. I tried booting up in safe-mode then restarting. Still, same issue. I am burning at 2x speed, using professional quality setting. The project preview works just fine. It goes through the whole idvd process just fine, until the burning and multiplexing. After burning about 10 minutes of the project, the disc ejects suddenly. Idvd says "done" but then at the bottom it says "about one minute left" and the little burning wheel symbol is still spinning. The disc plays fine in my DVD player till about ten minutes in, then freezes and eventually goes back to the main menu. I can see on the disc that it is only partially burned.
Oh, and I have also tried saving to a disc image and burning with toast and disc utility. Once, this actually did work with toast and resulted in a playable DVD. The weird part was that I still got the error sense key message in toast and thought I had made another coaster, but when I tested the DVD it worked fine in my regular dvd player only (it was not readable in my xbox or ps2). Since that one fluke, however, it hasn't been successful. Disk utility did not work for burning the disc image. I am absolutely at a loss here...somebody PLEASE help.

I believe I have finally fixed the problem but I am going to post what I went through just in case someone else ever runs into these same issues, maybe I can save them some time. I went through so much troubleshooting and each problem solved seemed to result in new problems, so, let me recap.
First, computer was working fine. Burned a DVD, it worked. Then a few days later, tried to burn another DVD. It didn't work. I tried different brands of discs, different types of discs, (-r and +r) sometimes there was a partial burn, sometimes no luck at all and an unusable, unplayable disc. The disc would eject early during the burning phase, giving me simultaneous contradictory messages that it was both "done" and had " about one minute left".
I tried running a verify/ repair disk permissions. Everything came out fine, but still no burned DVDs. I tried uninstalling and reinstalling idvd. I tried a cleaning disc. Still no go. Sometimes idvd would crash or freeze on me or give me error messages. Result varied depending on what i tried, but were never good.
Then I bought an external drive and tried saving my DVD project as a disc image and burning with toast as many people have suggested. This worked! So, I concluded that my SuperDrive was faulty but I'm not going to bother getting it replaced right now because the external works just fine. I thought my problem was finally solved, but then...
I noticed that upon restarting, my computer would display a white-gray screen as is normal, with the familiar apple symbol, but now a new addition: a very annoying loading bar that took 5-10 minutes to load. Unacceptable!!! Also, I noticed shortly after that iTunes did not work. It wouldn't even open, but crashed due to an error and asked if it could send a report. I tried deleting and uninstalling iTunes but that didn't work.
I ran another verify disc permissions with disc utility, and I got a very bad error message. It said there were errors on the drive and it could not be repaired and it said I needed to start up from the Mac OS X install disc and use disc utility to repair the volume. Problem with that...my install disc says it can't install on this computer. I soon learned from one (finally) helpful apple support guy that the reason for this was that I am running snow leopard 10.6.8 and the disc that came with my computer was for 10.5.2 or something.
On a side note: I had called apple support before and specifically asked if the reason the disc didn't work was because it was for a different version and the guy said he had no idea if that was the reason or not. Jerk. CLEARLY, that was the reason and my ignorant butt didn't know any better and he wanted me to pay 19.99 just to answer that question for me.
So, I went to the apple store and purchased snow leopard. It was delivered today, I started my computer from the new snow leopard disc and repaired my drive. Restarted. A bit slow restarting but no more loading bar and not as bad as before...iTunes still didn't work but I completely uninstalled a reinstalled it again and this time it seems to be working fine. Idvd is working, I saved another movie to disc might. And am assuming it will still burn fine with toast in the external drive.
During my arduous troubleshooting I discovered that I most probably have the seagate 1 tb hard drive that was recalled by apple due to its tendency to fail...whether this has been the root of my computer's troubles from the start, I still don't know for sure. But, everything seems to be functioning correctly now at least and since my computer has lasted this long without hard drive failures, maybe it will be ok. It's possible that I somehow caused the errors while I was fiddling around on the computer trying to fix idvd and iTunes. Hope this is helpful to somebody, someday. I did gain a lot of advice from various forums on the web and found many people having one or more of the issues I was running into, so I thought I should record my process here for others as well.

Macbook Pro keep ejecting OSX disc. It won't boot.

Hi
I bought a Mac OSX 10.6.3 Snow Leopard CD (Family Pack) to upgrade on my Macbook Pro, but it won't boot.
There are sound like it was running but it reject in the end. My Macbook Pro is Intel Core Duo 2GHz
with 2GB Ram. It is currently running OSX 10.5.8.
I tried the disc on other Macbook running 10.6.6 purchased 2-3 years ago and it work.
So i don't really know what happen with mine. My DVD drive work fine though.
Anyone have an idea need help please.

OK I did it anyway. It make my Mac work faster a bit. For example cursur arrown moves smoother.
But still doesn't solve ejecting Leopard disc problem. Do you have any other suggestion?
By the way I was able to sucessfully install Leopard on other Mac. It seem like mine is the only problem.
My Macbook Pro bought in 2007
Intel Duo Core 2 GHz
2 GB RAM
Running OSX 10.5.8
Please help!

ITunes wont burn anything

I am running iTunes 6.0.2 and can not burn anything. I have had this problem since version 5 though. I can put a blank disc in and it goes thru the motions that it is going to burn but never gets past the preparing the disc. Any help at this point would be great.

Well, the latest version of iTunes requires a minimum G3 500 mhz processor. Your system is 400 mhz. So that could be the problem. Quicktime requires a minimum G3 400 mhz, which could explain the sluggishness, as you're right at the line. Newer apps require higher processing power, otherwise, they could present operation problems.
Also running Tiger on your system with 512 RAM can slow everything else down.
Other than that, to perhaps resolve the iTunes burn issue you can try a fresh copy of iTunes and see if that makes a difference. To do so: Remove the existing iTunes application from your system, including the preference files com.apple.iTunes.plist and com.apple.iTunes.eq.plist found in your User Library/Preference folder, and iTunes.pkg and iTunesX.pkg files found in your Main Library/Receipts folder.
Next, download a fresh copy of iTunes from the Apple site. Not sure if that version if 6.0.2. If not, go to software update to upgrade to the latest version. Repair permissions via Disk Utility after you're finished.
Next, you'll have to setup your preferences again. This includes making sure iTunes is pointed to your Music Library (preferences - advance tab>general).
Post back with results.

Why can't my iMac see contents of discs or burn DVDs?

Contents of DVDs don't appear and I cannot burn DVDs.
About two months ago I became unable to burn a DVD.
One month ago I became unable to see the contents of DVDs, though my iMac can recognize and read an audio CD..
I've tried accessing information from commercial as well as Sony DVD-R 16X discs made by a friend using his iMac—to see if my friend's discs were blank, we opened them in his iMac and found all the programs; I tried again on my iMac and still can't see any content.
I have repaired permissions using Disc Utility, but the problems were not solved.
Discs appear on the desktop as "Untitled DVD". When I open "Disc Utility", the discs themselves do not show up, and the image for "SuperDrive" seems greyed out; still, when I select "SuperDrive" I can get "Info" and instructions for erasing a disk.
I was advised to open System Preferences>Users & Groups, unlock the lock, click on the little plus icon, make a new administrative account, then log out & into the new account; but the problems were not solved.

Hi Babowa,
I inserted my friend's DVD (proven to have content), saw the iMac could see no content, then went to: Apple > about this Mac > more info > System Report > Disc Burning and got the report below which says the disc is blank:
OPTIARC DVD RW AD-5680H:
Firmware Revision:          3AHB
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:
Type:          DVD-R
ID:          SONY16D1
Blank:          Yes
Erasable:          No
Overwritable:          Yes
Appendable:          Yes
Write Speeds:          2x, 4x, 6x, 8x
Twice I inserted a commercial DVD and it was automatically ejected both times.

My imac keeps ejecting my discs, wont burn anything either

Similar Messages

Maybe you are looking for