My iMac keeps on diconnecting from my network and The internet is very slow on it too.

Hi
My iMac has been acting wierd for the past month. It has been disconnecting from the internet/network and also it has a very slow speed when using Safari or any other internet application (eg. Skype). Im not sure why this is happening. My iMac has Windows installed (100GB partioned) and yet the internet is fast on it than the Mac side. On other computers and mobiles the internet is very fast, and does not disconnect. I scanned my computer and it came up with nothing.
Please Someone Help...

If you connect to your router with with Wi-Fi, please try connecting with an Ethernet cable. Turn Wi-Fi off and test. Any difference?

Similar Messages

  • Imac keeps restarting only when i am on the internet ''/

    *after 2 years of using my imac, its starting to act up, whenever i am on the internet my mac restarts on it own:::::: "/........ any suggestions*

    Try putting these numbers in Network>TCP/IP>DNS Servers, for the Interface you connect with...
    208.67.222.222
    208.67.220.220
    Then Apply. For 10.5/10.6 Network, highlight Interface>Advanced button>DNS tab>little + icon.

  • IPad 2 connects to my network and the internet and disconnects after a few seconds. This started after the last update.

    All my other computers work fine with the network settings I have.  I have done the reset in general settings and the toggling of the airplane mode button and a few other suggested remedies such as hard reboot, etC.  Can anyone help?  As much as I hate to do this I am thinking of going to another brand and perhaps someone would recommend one or discourage me from the move.
    Glenda

    Hi glendafromns,
    If you are having issues with intermittant WiFi disconnects on your iPad, you may find the following article helpful:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Regards,
    - Brenden

  • Help...I'm connected to my network and the internet but cant get on!

    Ok, so im connected to the internet and my network but when i open safari i can't get on the web. It says to run network diagnostics and when i do it tells me all is working fine!!!
    I've now added Firefox which will allow me on the net. But when users log on it wont automatically pick up the proxy settings. Its killing me because its such an annoying problem.
    It all started when we added a new ISA server for the PC and Xserve networks but we have since proved that that isn't causing the problems.
    ANYONE GOT ANY IDEAS!?!?! I NEED HELP
    G5   Mac OS X (10.4.6)   Mac Xserve and Xraid network going through an ISA Server

    Hey
    Just had a go and now help! We had an ISA expert in and a PC expert plus me and another MAC expert.....still no help!
    We formatted a comp and now safari works!
    Its killin me cos i don't wanna format all my comps
    arghhhh!

  • IOS 6 upgrade prevented Youtube from working and internet is very slow

    Since I upgraded to ios6, the internet is very slow and youtube stopped working.  Tried to download youtube app from google in itunes but it has not been working.  Used to love my iphone 5 but now very disappointed.  At this point I'm considering to return the phone.  Tried using youtube in safari but nothing.  Any help is appreciated.

    If you JUST updated it, may be that Software Update is still downloading pending updates. Since Mountain Lion does that thru the App Store, so you can start that up and check in Update/Purchases/Check for Unfinished Downloads...
    Or you can start up the Activity Monitor in Utilities, click on the Network tab and if you see a solid green line pegging the roof, means the kitty is downloading stuff for all it's worth.
    Default setting is to automatically check for and download any available updates. Adjustable in System Preferences / Software Update.

  • I am have trouble with 2 new 21.5" iMacs losing wifi connection from my network. I have 4 other vintage iMacs that never lose connection. Please help.

    I am have trouble with 2 new 21.5" iMacs losing wifi connection from my network. I have 4 other vintage iMacs that never lose connection. Please help.

    This subject has been talked/written about a lot, after Lion was introduced. A solution from Apple has not yet been published, everybody is waiting.
    Try for instance https://discussions.apple.com/thread/3734081?start=15&tstart=0, but there are more discussion groups with the same subject: frequently lost WiFi-connections in newer Macs running Lion or up.

  • Why does my iMac appear many times in my network and labelled 1,2,3, etc

    why does my iMac appear many times in my network and labelled 1,2,3, etc

    Ok, I solved it.
    I followed this steps:
    1- Turn Off Wi-Fi from the Wireless menu item
    2- From the OS X Finder, hit Command+Shift+G and enter the following path:
    /Library/Preferences/SystemConfiguration/
    3- Within this folder locate and select the following files:
    com.apple.airport.preferences.plist
    
com.apple.network.identification.plist
    com.apple.wifi.message-tracer.plist

    NetworkInterfaces.plist

    preferences.plist
    4- Move all of these files into a folder on your Desktop called ‘wifi backups’ or something similar – we’re backing these up just in case you break something but if you regularly backup your Mac you can just delete the files instead since you could restore from Time Machine if needed.
    5- Reboot the Mac
    6- Turn ON WI-Fi from the wireless network menu again

  • My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?  Read more: My iphone 3g is keep searching for network, and the carrier unable to load network list

    My iphone 3g is keep searching for network, and the carrier unable to load network list , wat shall i do?

    Yes, that kind of tallies with my experience ... after 3 days of useless iPhone 3G (BTW, killing 3G on the phone and relying on acquiring AT&T 2G didn't help, it still locked onto T-Mobile with the result that it was draining battery and rebooting frequently!), I ended up visiting the local Apple Store.
    Although the visit was not to resolve the iPhone problem, whilst there I happened to cycle the phone and due to the store having a local AT&T cell, the strength of the local signal meant that I finally re-acquired a AT&T 3G signal ... once locked on again the phone was fine for the next day.
    Nett outcome of this is that I would prefer to lay most of the blame for this debacle on the poor state of 3G support both by AT&T (and US carriers in general), maybe exacerbated in my case by two related events (the local DNC in Denver, which saturated local AT&T cells including 3G and a proliferation of v2.0.0 and v2.0.1 firmwares on iPhones in town, which dragged cell coverage into the weeds).
    It would be nice for future sanity if AT&T and T-Mobile could at least resolve the ability to acquire/release the iPhone gracefully, otherwise I'll be very sceptical of travelling back to the US with only my iPhone, as a self-employeed consultant I can't afford to be out of touch for three days again!

  • How can i keep my music from my iPhone and sync it my new macbook? Only purchased music seems to be available to sync, even though the rest of the music was uploaded from CD's on my  last laptop.

    Hi, I have changed from an old laptop to a macbook air. how can i keep my music from my iPhone and sync it my macbook? Only purchased music seems to be available to sync, even though the rest of the music was uploaded from CD's on my  last laptop.
    As I can't upload CD's onto the Macbook Air, how do I keep the existing music on my iphone syn onto my new macbook without deleting all the cds on the iphone??
    Many thanks!

    Hi RaulRod,
    Are you pressing the Sync button to transfer music after connecting your iPhone or do you have the option checked to 'Automatically Sync when the iPhone is connected?'
    Have you tried manually dragging and dropping music from your library into your phone?

  • For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme.  Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

    For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet.  More recently, I added an iMac and iPhone.   PROBLEMS:  A few months ago the Mac mini lost its connection to  the printer, and now it cannot locate the network at all. 

    If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
    Use the same SSID and password for both machines. Computers will connect to the strongest signal.

  • Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???

    Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???
    my iphone is now just coverd with case and the back house is crased

    Etisalat, Mobinil and Vodafone provide warranty service in your country.  You can also search Google for a 3rd party repair shop near you.

  • How do I keep my iPad from switching back and forth from my Apple ID to my husbands Apple ID?

    How do I keep my iPad from switching back and forth from my Apple ID to my husbands Apple ID?

    Your question confuses me because there is no way that the iPad can switch Apple ID's without user input. Where are you seeing evidence of this?
    If you are seeing app updates that require your husbands ID, that's because those apps were purchased with his ID and will always require his ID and password for updates.
    If you are seeing his ID elsewhere, explain....

  • I am trying to connect to a network but keep getting a message saying "Unable to join the network' and the only option is dismiss, what can I do?

    I am trying to connect to a network on my ipad but keep getting a message saying  " Unable to join the network" and the omly opion is dismiss.....Can anyone help me find out what is wrong please?

    Have a look at this may help
    http://www.apple.com/uk/support/ipad/wifi/
    Are you refering to a home network or some form of public
    if home network ensure your router has latest firmware and try rebooting it

  • How do I stop my iPhone 3 from tethering?  Everything I read says to go to Settings General Network but the Internet Tethering is always searching.  I've been advised to wait but it's going on 2 hours so I think I've met my "waiting" quota.  HELP!!

    How do I stop my iPhone 3 from tethering?  Everything I read says to go to Settings>General>Network but the Internet Tethering is always searching.  I've been advised to wait but it's going on 2 hours so I think I've met my "waiting" quota.  HELP!!

    Same with Bluetooth, as long as you're looking at the screen, it will be searching. As soon as you exit the screen it stops, so quit looking at that screen. You know your refrigerator light? You open the door and it's on...trust me, close the door & the light goes off .

  • I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on

    I bougnt my S5 a month ago and I am having two major issues.  The screen is very slow to respond.  When the screen is dark and I press the home button, it doesn't come on.  I have to press the button anywhere from 4-10 times and then it usually flashes on and back off.  It is very, very frustrating.  The other issue is that the battery drains very quickly.  I have called Verizon numerous times regarding these issues.  They tell me to do different things that never help.  We eventually did a factory reset and it still has the same issues.  Help!  It is a brand new phone and unfortunately I am in a new two year contract.  Ugh. Is there anyone out there who can help me?

    I have done that several times.  In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly.  I keep telling them I have already done them but they insist they are SURE it will work this time.  It never does.  After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying.  I did what you suggested above on the slim chance it would work this time but it did not.  I bought two S5's that day and the other one works perfectly fine.  I know I got a bad phone.  Verizon just does not listen.  It is a bad phone.  I just want a new phone that works properly.  Is that too much to ask?  I bought a new phone that has been bad from day one.  Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this?  It shouldn't be this difficult!  Help please!!!

Maybe you are looking for

  • TABLE - How to set the row in the table

    I have a problem where I have a selection on one view and then call a second view to display the results in a table. The table displays 5 rows. I then go down to the 20th row and select the row. When I have finished processing, I still have row 20 se

  • RFC connection BI and ECC 6.0

    Hi I am trying to connect BI and ECC 6.0 at home on two different virtual machines for data extraction and practicing delta management ( they are on the same virtual network). I am following these steps : Step-by-step procedure to connect BI with ECC

  • Error signaled in parallel query server p005 DATE format comparison

    Hello All, I have a data like this. {code} j_id   s_id     b_id    lc   t_date                             my_val1     my_val2 100    200    300     prs   2013-07-17 16:01:47         myval1     myval2 100    200   300     prs    2013-07-17 16:01:47  

  • SQL Developer 2.1 removes the stored password in SVN Application Data

    Hello everybody SQL Developer is a great Tool and I use it together with the SVN Versioning System. I also use TortoiseSVN on my Windows XP Operating System, that's why I found out that either the SQL Developer or its SVN Extension has a bug. I have

  • How can i call this file path into my bsp-html  to display the images?

    Hi I have a file path for an image like c:/test_logo.bmp. How can i call this file path into my bsp-html  to display the images? moosa