My iMAC often freezes after waking from sleep, or occasionally freezes at random. How do I stop this?

I have 10.6.8 on my iMAC. I have been shutting down my iMAC partly because I often get freezes a few seconds after the mac wakes. The freezes also occur at random. There is seldom any way to shut down the MAC except by pulling the power cord, though very rarely I am able to finally achieve a normal shutdown. I have tried fixing permissions as well starting in Safe Mode, and while these seemed to help at first, they no longer seem to have any affect.
I thought that maybe I got some kind of virus/trojan/etc., but from what I have read here that very likely is not the case.
I have also read here that the issue could be  "hardware."  Does this mean things like my printer or external speaker, or external hardrive? or does it mean the hardware of the computer itself? I have read about a "Hardware Test." Does this "Apple Hardware Test" have a benefit here in figuring out the problem?
Does anyone have any suggestions? I certainly can't keep 'pulling the plug,' and I know now from these discussions that shutting down (vs. sleep) on a regular basis is not best either for the imac. (I am loathe to upgrade to LION until I get this problem resolved, though, interestingly, I seem to see that a number of LION folks have the same or similar problem.)

FussGus,
Welcome to the Apple Discussions!
What periherals, especially USB ones, do you have attached to your Mac? Does the problem persist with everything other than the Apple keyboard and mouse disconnected?
Does the problem persist if you Start Up in Safe Mode? If so, check what items are in /Library/StartupItems and /Library/PreferencePanes.
As generic advice for sleep-related issues:
For a Mac OS X with sleep problems (file names and locations are for 10.4.x):
-- trash /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
-- trash /Users/[username]/Library/Preferences/com.apple.systemuiserver.plist
-- reboot while resetting PRAM (restaqrt while holding down command-option-p-r until you hear three sets of chimes, then release the keys)
While not directly related, since your wakes before freezing, also refer to Computer Will Not Wake From Sleep

Similar Messages

  • After upgrading to Tiger, freeze after waking from sleep on PM G4

    My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
    So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
    When I installed Tiger, I used the 'archive' option.
    My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
    When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
    I also see an error in the system.log which may reveal what is going on:
    Nov 20 18:54:40 localhost kernel[0]: standard
    timeslicing quantum is 10000 us
    Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
    2005 11: 46:54)[44]: starting
    Nov 20 18:54:40 localhost kernel[0]:
    vmpagebootstrap: 284852 free pages
    Nov 20 18:54:40 localhost kernel[0]:
    migtable_maxdispl = 70
    Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
    modules
    Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
    1982, 1986, 1989, 1991, 1993
    Nov 20 18:54:40 localhost kernel[0]: The Regents of
    the University of California. All rights reserved.
    Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
    headers and 2949 cluster IO buffer headers
    Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
    9 already taken
    Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
    AppleUSBOHCI[0x2057000]::start OHCI controller will be
    unloaded across sleep
    Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
    TI ID 8019 built-in now active, GUID 000a27ff
    feb38fe6; max speed s400.
    Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
    VendorID 1033 ID cd PCI now active, GUID 0000303c
    0008c32e; max speed s400.
    Nov 20 18:54:40 localhost kernel[0]: Security auditing
    service present
    Nov 20 18:54:40 localhost kernel[0]: BSM auditing
    present
    Nov 20 18:54:40 localhost kernel[0]: disabled
    Nov 20 18:54:40 localhost kernel[0]: rooting via
    boot-uuid from /chosen:
    474ACE52-2523-3EE7-9C54-DDC3734C7922
    Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
    ID="0"><key>IOProviderClass</key><string
    ID="1">IOResources</string><key>IOResourceMatch</key><string
    ID="2">boot-uuid-media</string></dict>
    Nov 20 18:54:40 localhost kernel[0]: Got boot device =
    IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
    Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
    Nov 20 18:54:40 localhost kernel[0]: BSD root:
    disk0s10, major 14, minor 10
    Nov 20 18:54:40 localhost kernel[0]: jnl:
    replay_journal: from: 2668032 to: 12288 (joffset
    0xe04000)
    Nov 20 18:54:40 localhost kernel[0]: Jettisoning
    kernel linker.
    Nov 20 18:54:40 localhost kernel[0]: Resetting
    IOCatalogue.
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 2
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: Matching service
    count = 4
    Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
    loaded and registered.
    Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
    version: 4001000
    Nov 20 18:54:40 localhost kernel[0]: raw version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
    2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
    version: 4001000
    Nov 20 18:54:40 localhost kernel[0]: raw version:
    Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
    2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
    Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
    filtering initialized, default to accept, logging
    disabled
    Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
    Ethernet address 00:0a:27:b3:8f:e6
    Nov 20 18:54:41 localhost launchd: Server 292f in
    bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
    abnormally: Hangup
    Nov 20 18:54:41 localhost lookupd[56]: lookupd
    (version 365) starting - Sun Nov 20 18:54:41 2005
    Nov 20 18:54:41 localhost diskarbitrationd[36]:
    disk0s10 hfs
    474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
    Nov 20 18:54:41 localhost kernel[0]: jnl:
    replay_journal: from: 1374208 to: 1564160 (joffset
    0x624000)
    Nov 20 18:54:41 localhost diskarbitrationd[36]:
    disk1s10 hfs
    947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
    /Volumes/Backup
    Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
    [98000000:08000000]
    Nov 20 18:54:43 localhost
    /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
    Login Window Application Started
    Nov 20 18:54:43 localhost loginwindow[72]: Login
    Window Started Security Agent
    Nov 20 18:54:44 localhost mDNSResponder: Adding browse
    domain local.
    Nov 20 18:54:45 localhost kernel[0]:
    UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
    Full Duplex
    Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
    setting hostname to "Jason-Radtkes-Computer.local"
    Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
    executing
    /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
    Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
    posting notification
    com.apple.system.config.network_change
    Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
    lookupd (version 365) starting - Sun Nov 20 18:54:47
    2005
    Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
    target=enable-network: disabled
    I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
    I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
    I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
    Thanks in advance for your help.

    Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
    Ron

  • Freeze after waking from sleep mode on MBP retina

    After waking from sleep mode my MBP retina freezes for 3-5 seconds. Mouse and touchpad don't work. I wonder if it's mountain lion problem or hardware problem. Anyone faced this?

    Just got a brand new model and OS X 10.8.2 (12C3012) and face the same issue, almost everytime it sleeps for too long. This is not a 3rd type SDD, this is a standard Apple SSD. I turned off the BT, I removed the almost every option from the battery saver mode. The current test is to disable the power nap - I will let you all know the result in a few hours.

  • Freeze after waking from sleep

    hi, it's been happening only in the past 3 days.
    my mac pro is less than a month old.
    3 gig ram, dual 2.66mhz processor, 120G hd with more of a third free disk space.
    this's what happens: if the computer is in sleep mode, and if after few hours i wake it back up, it freezes.
    for the first 10 seconds, the computer apparently works fine, but after that the curson stops responding, as well as all apps.
    i can't quit applications, or esc...
    all i can do is to powerboot it again.
    i've run disk utility and verified disk and repaired permissions.
    as it is now all is in check.
    can you please let me know what i can do?
    on my other systems i used to run Cocktail, but i haven't installed it or run on this intel machine yet, not to screw things up.
    can anyone tell me what i should do for this freeze issue, and what's the best system management utility for intel machines?
    thanks in advance
    milly

    Cocktail is not a system management utility, but rather a troubleshooting only utility. Freezes can happen waking from sleep often if there is a third party USB device connected or a PCI adapter to USB that is not familiar with Apple's Energy Saver low power mode. Before proceeding with this experiment, it is important to backup your data*:
    http://www.macmaps.com/backup.html
    Dismount (if a volume), and disconnect all third party USB devices and see if it freezes. If it does, make sure the hard disk is less than 85% full (an arbitrary number most have found to be safe for Mac OS X) using my http://www.macmaps.com/diskfull.html FAQ as a guide. And if it still freezes waking from sleep, repair the directory:
    http://www.macmaps.com/directoryfaq.html
    Cocktail, and other cache cleaning utilities should be avoided unless an obvious cache problem exists. You can use Cocktail also to delete files no other programs will delete, but only after backing up your data, to ensure you don't delete the wrong file.
    * Links to my pages may give me compensation.

  • 2009 Quad MP freezes after waking from sleep

    Hey again.
    I've read numerous reports about the sleep/waking problem but mine seems to be different. I even created a new main admin account to see if some of my preferences (I migrated my user accounts from an iMac over to the new MP) and still having the same issues.
    If I let the system go to sleep it will on its own but when I wake it up the keyboard and mouse don't do anything. I even unplugged the mouse/keyboard and plugged them back in and still nothing. I have to hold the power button down to shutdown. Upon restarting everything is fine again.
    Now if I put the system to sleep manually it will sleep and wake perfectly!! I know I can work around this by not letting it go to sleep on it's own but why would be wake from sleep one way but not the other?
    Any help welcome.
    PS. I have a OWC 1TB FW800 hooked up, Wacom tablet/pen, keyboard and that is it. I have the hard drives set to 'sleep', and only have istat menu bar running. I've tried it with that off and no programs running and still have the same results.

    but after I bought this MP it's been headache after headache. (Sleep issues, monitor issues..)
    Are you still under warranty? Can you have the machine replaced? I would try to do that... No reason for bad experiences from a brand new machine. No one deserves that and you may just have gotten a machine by nature that is a bit buggy. Granted the dust is still settling about these Macs and how they play out in the real world. But consistent problems like yours, are worth fixing. Getting the Mac replaced would be ideal.
    JM is probably right about the driver, I forgot that too. One removes everything except the kernel of trouble in the first place. It's a shot anyway. There could be more going on.

  • Wifi/System Preferences Freezes After Waking From Sleep Mode.

    Every since I installed Mountain Lion, I've had the issue of my MacBook Pro freezing up while it checks for Wifi after waking up from sleep mode. I have to constantly restart my computer. I'm wondering if Apple is aware of this happening on other computers and not just mine.
    Also, my laptop is considerably slower since installing the OS update, especially when I turn on my computer.
    - Rog

    !!!!!!!!!!!So far only this has worked for me!!!!!!!!!!!!!!!!
    Go to System Preferences -> Energy Saver -> and UNcheck the box that says "Put hard disk(s) to sleep when possible on BOTH the Battery and Power Adaptor tabs.
    I had this issue when I first installed Mountion Lion on my Aluminum MB 2008. Thought it was 10.8 so I down graded to 10.7 Lion, issue still happened. But after I applied this setting the issue seemed to go away. Before this I also deleted the old wifi settings in Network Utilities and added the Wifi device, ssid, and wep key again (not using WPA2). I will continue testing through the night and will update once I can determine the issue is gone.
    Hopefully this works for others too.

  • Why does my computer keep freezing after waking from "sleeping"?

    I'm running Lion (10.7.2) and frequently, not everytime, but often, the computer will freeze about 1-2 min after I've woken it from sleep – there are usually 1-2 applications open and then I can work for about a couple minutes and then it freezes and the only way to resolve it is to power it off w/ the power button and then restart.
    I've got a late 2008 15" MacBook Pro, 2.4Ghz Intel Core 2 Duo, 4GB RAM – there is very little on the hard drive, but that seems irrelevant here anyway.
    Thanks for any tips/help!

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • Programs freeze after waking from sleep mode

    For some reason if I put my MBP into sleep mode (10.6.3), any programs I try to start up will freeze (I would to force quit since nothing opens). Any programs that were open prior to going into sleep mode working fine, unless quit it and then try to restart the program same problem (so if firefox open before sleep placed my laptop in sleep mode then I wake the laptop, firefox works fine. Now if I were to quit firefox after my laptop was turned on from sleep mode then I quit firefox and try to reopen it, then firefox icon just bounces up and down and nothing happens and it freeze and I have to force quit). The only way is for me restart the laptop, but even then its a temp fix.

    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
    After that Repair Permissions.
    No need to report Permissions errors....we all get them.
     DALE

  • Macbook freezing after waking from sleep

    My 4 GB RAM macbook freezes for 30 seconds after I wake it from sleep mode. Sometimes it is unresponsive and sometimes the beachball comes up. I have 200 gigs of free space and no login items. The bluetooth wake is also turned off. What is the problem?

    I have noticed similar behaviour.  I think it depends on the network activity being carried out when I closed the lid, and maybe it has to wait for something to time out. I don't really know, I'm just guessing.
    I have noticed that when it happens, I have to close the lid and watch the light on the front. This will be solidly lit. When it starts "breathing" I can open my MacBook again and it will work ok. 
    Bob

  • IMac is unresponsive after waking from sleep

    Have a late 2006 20 inch iMac
    This just started happening... after a long sleep when you wake screen is either blank or frozen.
    Restart does NOT help... Just have a blank screen. Sometimes a flashing question mark
    The only way is to restart with a safe boot. Then it takes at least 10 minutes to come back up.
    Then if you restart it's ok until it goes to sleep again.
    Sometime just checking something like mail will freeze the system
    Have done the pram reset. Used disk utilities to check/repair HD... Said all was fine. repaired permissions etc.
    Was running system 10.5.8 upgraded to system to 10.6.4 same results
    Have not done a complete erase of HD yet
    Any ideas? Thanks

    I'm having the same issue with my Macbook, and it started just after I updated to 10.6.5. This has happened ~5 times in the last week and I never had this problem before. Either there's a blank screen after wake or there is no response when I type into the log in screen (I have mine set up to require a password after wake)

  • System Freeze after Waking from Sleep

    Hi,
    I have seen a few other posts out there with similar issues however mine is a little different. I have been noticing a few oddities since updating to Mac OS X.5, and finally X.5.1. The first challenge I noticed was that my machine does not go to sleep all of the time now, and it might be because I have a HD plugged in at night for Time Machine, but I am not sure because I seem to remember it doing this before.
    Secondly I have noticed that when it would fall asleep, and then I would wake it up it would take some time before I gained control of the track pad and the keyboard. I chalked it up to the OS doing what it needed to do to get the machine ready. The times seemed to vary and it didn't happen all of the time.
    However this last time I opened the machine and it gave me the desktop, and an iCal alert but the Finder was the fore most application. I waited but never gained control of the input devices and was forced to restart the machine.
    I was wondering if anyone else had seen this or has any ideas of what might help.
    Thanks
    Patrick

    A PMU reset might help.
    Sounds like you should try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk also.
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
     Cheers! DALE

  • Macbook pro 2010 crashes after waking from sleep

    Hi,
    I upgraded to mountain lion a month or so ago and ever since my MBP often crashes after waking from sleep.  I've included the error report below. Any help would be appreciated.  After it restarts, it works fine.  Problem consistently happens after waking from sleep.
    Thank-you
    Interval Since Last Panic Report:  55755 sec
    Panics Since Last Report:          1
    Anonymous UUID:                    D0E51DBB-BAAC-864E-AF93-8DAF5E934CE9
    Sun Dec  2 08:24:22 2012
    panic(cpu 0 caller 0xffffff7f8aabdb25): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811e05d000 0x0a5480a2, D0, P2/4
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80fa7bb420 : 0xffffff800a21d626
    0xffffff80fa7bb490 : 0xffffff7f8aabdb25
    0xffffff80fa7bb520 : 0xffffff7f8abb74b3
    0xffffff80fa7bb580 : 0xffffff7f8abb7527
    0xffffff80fa7bb5f0 : 0xffffff7f8aecc853
    0xffffff80fa7bb730 : 0xffffff7f8abdd659
    0xffffff80fa7bb760 : 0xffffff7f8aac78da
    0xffffff80fa7bb810 : 0xffffff7f8aac2fac
    0xffffff80fa7bba00 : 0xffffff7f8aac43a2
    0xffffff80fa7bbad0 : 0xffffff7f8acb815a
    0xffffff80fa7bbb00 : 0xffffff7f8ac9be1a
    0xffffff80fa7bbb30 : 0xffffff7f8ac9b241
    0xffffff80fa7bbba0 : 0xffffff7f8ac9b362
    0xffffff80fa7bbc20 : 0xffffff7f8aca687d
    0xffffff80fa7bbc50 : 0xffffff7f8acae61c
    0xffffff80fa7bbdd0 : 0xffffff7f8aa5a3c7
    0xffffff80fa7bbe40 : 0xffffff7f8aa4457b
    0xffffff80fa7bbeb0 : 0xffffff7f8aa46c04
    0xffffff80fa7bbf00 : 0xffffff7f8aa0839f
    0xffffff80fa7bbf20 : 0xffffff800a649e4a
    0xffffff80fa7bbf60 : 0xffffff800a23dcde
    0xffffff80fa7bbfb0 : 0xffffff800a2b26b7
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000->0xffffff7f8aa36fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
             com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000->0xffffff7f8aa53fff
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
             com.apple.NVDAResman(8.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa56 000->0xffffff7f8ad58fff
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
                dependency: com.apple.iokit.IONDRVSupport(2.3.5)[86DDB71C-A73A-3EBE-AC44-0BC9A38B9A44]@0xff ffff7f8aa42000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.5)[803496D0-ADAD-3ADB-B071-8A0A197DA53D]@0 xffffff7f8a9ff000
             com.apple.nvidia.nv50hal(8.0)[9F3D09B5-3158-3D9E-BDA3-E71576AAD3B7]@0xffffff7f8 ad66000->0xffffff7f8b088fff
                dependency: com.apple.NVDAResman(8.0.0)[A4C53A36-22B6-3075-82B9-9DE612A9C015]@0xffffff7f8aa 56000
                dependency: com.apple.iokit.IOPCIFamily(2.7.2)[B1B77B26-7984-302F-BA8E-544DD3D75E73]@0xffff ff7f8a829000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000000a000000
    Kernel text base: 0xffffff800a200000
    System model name: MacBookPro6,2 (Mac-F22586C8)
    System uptime in nanoseconds: 50092647901403
    last loaded kext at 48562451601465: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f8c5c0000, size 16384)
    last unloaded kext at 48645674911297: com.apple.driver.AppleUSBCDC    4.1.22 (addr 0xffffff7f8c5c0000, size 12288)
    loaded kexts:
    com.razer.orochi.driver    2.0
    com.rim.driver.BlackBerryUSBDriverInt    0.0.74
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AudioAUUC    1.60
    com.apple.driver.AGPM    100.12.69
    com.apple.driver.AppleHDA    2.3.1f2
    com.apple.GeForce    8.0.0
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.9f33
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.ApplePolicyControl    3.2.11
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.AppleUpstreamUserClient    3.5.10
    com.apple.driver.AppleIntelHDGraphics    8.0.0
    com.apple.driver.AppleIntelHDGraphicsFB    8.0.0
    com.apple.driver.AppleMikeyHIDDriver    122
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport    4.0.9f33
    com.apple.driver.AppleSMCPDRC    1.0.0
    com.apple.driver.AppleSMCLMU    2.0.2d0
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AppleMikeyDriver    2.3.1f2
    com.apple.driver.AppleMuxControl    3.2.11
    com.apple.driver.AppleMCCSControl    1.0.33
    com.apple.driver.AppleLPC    1.6.0
    com.apple.driver.SMCMotionSensor    3.0.2d6
    com.apple.driver.AppleUSBTCButtons    235.4
    com.apple.driver.AppleUSBTCKeyboard    235.4
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AirPort.Brcm4331    602.15.22
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard    165.5
    com.apple.driver.IOBluetoothHIDDriver    4.0.9f33
    com.apple.driver.AppleHIDKeyboard    165.5
    com.apple.driver.DspFuncLib    2.3.1f2
    com.apple.iokit.IOAudioFamily    1.8.9fc10
    com.apple.kext.OSvKernDSPLib    1.6
    com.apple.nvidia.nv50hal    8.0.0
    com.apple.NVDAResman    8.0.0
    com.apple.iokit.IOSurface    86.0.3
    com.apple.iokit.IOSerialFamily    10.0.6
    com.apple.iokit.IOBluetoothFamily    4.0.9f33
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.iokit.IOFireWireIP    2.2.5
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport    4.0.9f33
    com.apple.kext.triggers    1.0
    com.apple.driver.AppleSMBusPCI    1.0.10d0
    com.apple.driver.AppleGraphicsControl    3.2.11
    com.apple.driver.AppleBacklightExpert    1.0.4
    com.apple.iokit.IONDRVSupport    2.3.5
    com.apple.driver.AppleSMBusController    1.0.10d0
    com.apple.driver.AppleHDAController    2.3.1f2
    com.apple.iokit.IOGraphicsFamily    2.3.5
    com.apple.iokit.IOHDAFamily    2.3.1f2
    com.apple.driver.IOPlatformPluginFamily    5.2.0d16
    com.apple.driver.AppleSMC    3.1.4d2
    com.apple.driver.AppleUSBMultitouch    235.7
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.driver.AppleKeyStore    28.21
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
    Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
    Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334348302D4346382020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.81.22)
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST9500420ASG, 500.11 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Razer Orochi, 0x1532, 0x0013, 0xfa140000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 5
    USB Device: BRCM2070 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 9
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3

    Back up all data, then uninstall the Razer and Blackberry software according to the developers' instructions. Reboot and test. Most likely there will be no change. In that case, see below:
    MacBook Pro (15-inch, Mid 2010): Intermittent black screen or loss of video

  • My MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode

    Hello, everyone. Since I updated to Yosemite, my MacBook Pro won't reconnect to my Wi-FI automatically after waking from sleep mode.
    Does anyone know how to fix that?
    Thanks in advance,
    Arthur.

    Hi, arthurpacifico. 
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting steps that I would recommend trying to see if it corrects this issue.
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Reset your computer’s PRAM
    http://support.apple.com/kb/HT1379
    If the issue persists, try the troubleshooting steps I have attached below.
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
    After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
    After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
    Solution
    Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
    Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
    Click the TCP/IP tab from the top of the screen.
    Click the "Renew DHCP lease" button.
    Select the Wi-Fi tab and view your Preferred Networks list.
    Select each network and click the minus sign to remove those networks from your Preferred Networks list.
    Click OK and close the Network preferences.
    Remove your stored network passwords using the Keychain Access Utility.Restart your computer.
    Open Keychain Access from /Applications/Utilities. Your window will look like this:
    Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
    Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
    Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/ht4628
    Cheers,
    Jason H. 

  • Apps are switched after waking from sleep

    When I close the lid, my MacBook Air goes to sleep, and when I open the lid again, it wakes from sleep. But it also switches apps after waking from sleep. Is there anything I can do to prevent this from happening?
    This has been discussed earlier, but the proposed solution (changing System Preferences > Security & Privacy > General > Require Password x minutes after sleep) only fixed it temporarily. The symptom reappeared after a short while (after the first restart, I think, but I'm not sure).
    I noticed that the problem does not appear in a new user. It only appears in a user account I moved and upgraded across a couple of Macs and OS X updates. Is there anything I can do short of creating a new user account?

    FWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.

  • After waking from sleep, my iMac (Lion) is unresponsive.  The mouse moves, but when I click things it won't open them.

    After waking from sleep, my iMac (Lion) is unresponsive.  The mouse moves, but when I click things it won't open them.
    This has happened EVERY time the iMac goes to sleep for the last few days.. the only way I have found to resolve the issue is to manually restart the computer each time via the button on the back of the iMac.
    Any and all help is appreciated!
    Thanks

    FWIW, I never sleep my machines or their HDs, just their displays and never have an issue waking up the displays, usually run 24/7. Give that a shot.

Maybe you are looking for

  • Can i have the same Apple-Id-Account to two iPhone?

    Can i have the same Apple Id Account to two iPhone? Or do I need to get a new one? With iPod you can have more than one to the same ID? Regards , Yvonne

  • XML file format

    I'm using UTL_FILE package to write into a text file. Instead of writing this into a text file I want to write this into a XML file. How to do this using the pl/sql procedure?What package and function I have to use to accomplish this?Please let me gi

  • CX_RSR_X_MESSAGE when creating update rules

    Hi, I'm trying to activate SAP Demo scenario for procurement, infocube 0D_PU_C01. I have activated everything except for update rules. Activation of update rules fails with CX_RSR_X_MESSAGE short dump. When I try to create UR manually I get the same

  • Image Upload Problem

    Hi To All I am developing one employee application. in this, The employee has to register with my application. He has to provide all his details. And finally he has to upload jpeg/gif/png format picture. Everything is working good. But the problem is

  • Help on:SAP Workflow mass or batch approval

    Dear Experts, In my current project, I got a requirement that client want to approve training course registration requests in batch. e.g. Person A created a request and one workitem created, person B created another request and another worktime creat