My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Similar Messages

I'm trying to transfer my iTunes library from my old Windows-based Acer to my new MacBook Pro. The Acer has two hard drives, and I've had to split my music between the two drives in order to hold it all.

Neither drive has enough room to consolidate the entire library. And over time (for reasons I just chalk up to the Acer being a bad computer), I've inadvertently created multiple "libraries". After everything went missing somehow a couple of years ago, I had to import a previous library called "Previous iTunes Library," and my library has annoyingly enough been called that ever since. What's the best way to make all this get fixed into a new complete library on my new Mac? I have an external hard drive, and if I cleared everything else off of it, it might be able to store the entire consolidated library. Would that work?

It sounds like the library might have been placed in your Home/Library folder which is invisible.
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
When you find the iPhoto library move it to your Pictures folder.
OT

My HP computer's hard drive crashed. I have replaced the hard drive and reinstalled all of the software. I have copied my I tunes library from my backup hard drive to the new one. How do I restore the permissions? This is the 3 rd time I have had to d

My HP computer's hard drive crashed. I have replaced the hard drive and reinstalled all of the software. I have copied my I tunes library from my backup hard drive to the new one. How do I restore the permissions? This is the 3 rd time I have had to do this. THe share screen says you are limited to 5 ??

No backup is not good.
You can transfer itunes purchases from an ipod. File>Transfer Purchases

My husband backed up our music and movies onto a hard drive and now all my playlists in my itunes have disappeared, how do I retrieve them back into my itunes library???

My husband backed up our music and movies onto a hard drive and now all my playlists in my itunes have disappeared, how do I retrieve them back into my itunes library???

Sounds more like the media was moved.
Move it back.

I have 5 computers authorized to use my iTunes. 2 of those computers do not exist and have had their hard drives destroyed. How do I remove those computer from my iTunes account?

I have 5 computers authorized to use my iTunes. 2 of those computers do not exist and have had their hard drives destroyed. How do I remove those computer from my iTunes account?

Begin by opening the iTunes program and going to the iTunes Store via the iTunes Store button in the top right.
Once you're at the iTunes Store, click on the Sign In button at the top left corner (if you're not signed in) or on your account name in the same location (if you're already signed in).
This will bring you to your iTunes account. In the top box, you'll see a section labelled Computer Authorizations towards the bottom. Next to it is a button that reads Deauthorize All. Click it.
A window will pop up asking you to confirm that this is what you want to do. Continue.
In just a few seconds, all 5 computers on your account will be deauthorized.
Now, re-authorize just the computers that you still use and you'll be all set.

I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

I am running Snow Leopard on my iMac and have partitioned my hard drive to run Windows XP. If I upgrade to Yosemite, will I still be able to run XP?

bobfromnorth battleford wrote:
...Now what happens if I upgrade to Yosemite on either my iMac or my MBPro?
If I install VM Fusion or Parallels, does Windows run all the time? How does that affect computer performance? and how much do I need to worry about hard drive corruption?
Current versions of Fusion and Parallels are compatible with Yosemite. Both are applications which you only run when you want to run Windows within them. As such, there's no effect on computer performance when they're not in use. Like any other software, there is some additional load on your Mac when both Windows and the Mac OS are running together, but any noticeable effect depends on what each is being expected to do and what resources (e.g. available RAM and the number of CPU cores) you can devote to each.
I think there's less chance of HD corruption with a VM than there is with running Windows natively on the Mac in Boot Camp. Consider that, with a VM, you can create Snapshots of the state of your VM at a given time, and then, if something goes wrong (virus, malware, software installations), you can simply restore the Snapshot in a matter of seconds and eliminate the problems in the process. Moreover you can make a backup copy of the entire VM file, and replace a later version if you wish. Also consider that you can assign, say, 100GB of HD space to the VM, but the actual space devoted to the VM is only what's actually used; as more is needed, more is made available and Windows can't tell the difference. So, for example, my Win 7 Pro VM has an 80 GB virtual HD but only takes up 45 GB on my SSD, and that's with XP Mode in VPC installed inside it.
Microsoft no longer supports XP, though virus signature updates are still being issued. But MS has installed a pop-up message about EOL that won't go away (it's installed with KB2934207). Even if you remove that KB in Add and Remove Software, the pop-up continues. But if you have a Snapshot or a backup which is prior to it's original installation, you can skip installing KB2934207, and suppress it's reappearance on a Software Update list.

I have lost my imac bootable disks and have erased my hard drive.

I wanted to format my hard drive and put a clean install of Tiger on my iMac so that I could sell it, so I went in to disc utility and erased my hard drive. What I thought were my bootable discs were for my macbook pro with Snow Leopard on, and they wont work on my iMac. I have since gone in to disc utilities from the bootable discs (just after it tells me these discs wont work) and have replaced my hard drive with the DVD (thinking I would be able to boot to that point and mount an image from another DVD to run tiger from there) and now I am totally lost! I know I shouldnt meddle with things I dont know, but I've never managed to break a windows PC by doing this!
Could someone help please as I have no idea what I can do now!
Super thanks
Helen

Replacement disks run about 16.00 per disk. You can buy Mac OS X Tiger from Amazon for anywhere from 79.00-200.00.
If you buy a full retail copy of an OS like Snow Leopard you can install that on any compatible computer. The license for a standard retail copy of the Mac OS entitles you to install it on 1 system. However the retail copy of the Mac OS does not include the iLife Applications which come with the original install disks that came with your computer.
The individual install disks that come with each computer are made just for that computer and include drivers required for that system. As a former Dell owner I can tell you that Dell also uses specialized install disks for the OS. They don't hand you a copy of windows, rather a set of disks that are specific to that model of computer.
Cheers!

I just need to know how you get an iTunes library off the original hard drive of a mac and onto an external hard drive and still have it work normally?

I just need to know how you get an iTunes library off the original hard drive of an imac and onto an external hard drive and still have it work as it normally would?

http://support.apple.com/kb/HT1449

I have an external hard drive and want to know how to transfer files to my new lap top Window 7

I have an external hard drive and I want to transfer my i-tune files to my new laptop....Anyone done this? What must I do?Thanks

These are two possible approaches that should work.
Method 1
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
I'd recommend method 1 since it establishes an ongoing backup for your library.
tt2

I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well??

I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well?? plzz help
Merry Christmas

Repartition and format the drive for a Mac:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

My hard disk is damaged and i have no external hard drive, and i was wondering, if i sent my computer to Apple, would they back up my files for me before repairing it?

My hard disk has been damaged for about 4 months now. When I ran the disk repair under disk utility, it told me to back my files and send it in for repairs. My problem is that I had a external hard drive, but I lost it, so I obviously can't back up my files. Also I tried using other external hard drives and that didn't work, pretty sure it was because they were not formatted for a mac. So my question is that if I send my computer to Apple, for repair, that would they back up my files there before repairing my computer. It could be a dumb question but at least I asked. Also my mouse pad no longer works. The "clickability" of it stopped about 3 months or so after getting the computer and just around last Christmas the mouse would not click anymore at all, it would move if one put there fingers on the mousepad but it would not "touch click" anymore. So yeah, help!
And the OS X was still a snow leopard, not sure the number of the OS.

Can't you just get another external drive, format it for Mac OS Extended (Journaled) and backup some if not all of your files? Apple's not in the data recovery business. You should have maintained a backup and now it might be too late. Your best bet would probably be just to call it a loss and buy both an internal, to put in your machine, and an external, for backup purposes. You can boot from your installer disc, format the 'new' internal and begin restoring your apps at least.
I'll never understand why some people don't have backups. Drives fail. It's best to have redundant backups so that all three or four drives don't all fail at once.
Sheesh - I know that I'm not helping your problem but maybe now you've learned your lesson and others will as well.
Clinton

I have a 1st Gen Time Capsule 1tb. It turns on, boots up and turns green for 5-10 mins, but then turns solid orange and then blinks orange. I have removed the hard drive and replaced the power supply . . . still the same problem. Suggestions?

I purchased a used 1st Gen Time Capsule with a 1 tb hard drive.
When I plugged it in and did the initial setup, it worked fine, but gave me a hard drive error. A few minutes later the green light turned solid orange, then blinking orange, then the status light went off. The lights in back stayed on.
I removed the hard drive and rebooted, it turned green for 5-10 minutes then reverted back to a solid orange, blinking orange, then went off.
Next I purchased a remanufactured internal power supply, and installed it (without the hard drive in). It turned green almost immediately. After about 15-20 minutes, I decided to try to install the hard drive again, booted it up, and tried to erase the hard drive with was working properly according to the software. It stopped erasing the disc after about 20 minutes and turned solid orange again, then blinking, then no status light (but back lights were still lit).
I'm a bit flabbergasted at this point, any suggestions on what to do next? I think i've pretty much replaced everything except the logic board, but can't seem to find any information on the symptoms of a logic board malfunction.
Thanks!!!!!!!

A Gen3 is identical board to a Gen4 although they have some differences in firmware and wireless card was updated on every model.. but a Gen3 is substantially faster than Gen1, Gen2 which also have identical boards.
You can with careful shopping get a Gen3 pretty cheap.
Most use a delta power supply which I think is a lot better than the flextronics used in most Gen1/2
You can sell back the parts to ebay.. people still would buy the power supply etc. Even just the case can be useful to a repairer.
But if the board is gone.. it is hard to repair.. not impossible.. but hard.
Gen 3 and Gen 4 are not without faults.
See this page.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I have fixed it a different way.. by using the small converters you can buy in bulk from ebay for $1 each.. KIS3R33 .. they produce 3.3V at 2A peaking at 3A.. amazing.. I keep using them to replace onboard power converters by removing the inductor and simply power directly.. the end result has worked great. You can simply change the resistors around and get any output from 1v to 20v depending on input.
Is it worth doing it .. no of course not.. it will waste many more hours than $50 is worth.. but it is kind of fun that you can actually make things work again.
Here is a pic of the Gen 3 totally powered by me. All onboard power removed.
This was to track down the fault in the Gen3.. but I am kind of pleased that it ended up neat enough and reliable enough to work for more than a year.. the Gen3 still serves as a way to get Netflix via network for a friend running 24/7.
The units supply (from left to right)
1v, 1.1v, 3.3v, 5v, 1.8v
It is feed by 12v supply which is also directly connected to the hard disk.
So it is possible to fix.. !! Only got to be a bit crazy.

I have deleted my hard drive and know i can't plug my ipod

As the title says, i have lost all my data in my extarnal hard drive and all my music, pics and video were in it!
so now i can't plug my ipod cuz i'm affraid that i will lose all my music! 14 Giga is not easy.
is there anyway to copy all my music from my ipod without losing any? Saddly i didn't buy any music via iTunes.

See Zevoneer's post here > Moving files from Ipod to Itunes: Apple Support Communities

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB hard drive and only 120GB Macbook. It worked fine before the latest Maverick's

Every time I try to back up my Macbook Pro with an external hard drive using Time Machine, I receive the error of "the disk does not have enough space". I have a 500GB external hard drive and only 120GB Macbook. It worked fine before the latest Maverick's update. Any help would be greatly appreciated.

My guess would be it has created an entirely new backup of your drive when you upgraded to Mavericks.
See Here: http://pondini.org/TM/1.html
And here: http://pondini.org/TM/9.html
Peruse the whole site. There is a lot of information there.

I have a new hard drive and my iPhone 4 needs to sync

my hard drive was replaced. I need to get my old apps back on my hard drive and how do I do this? . How do I sync with my new drive, . my iPhone has a lot of my information I need. How do I sync with my new drive and not lose my information that is very importlant

Copy everything from your backup copy of your cpomputer to your new hard drive.

My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up. I've run Disk Permissions and have verified my hard drive and all is in order. What do I do to start up my Mac in a normal manner?

Similar Messages

Maybe you are looking for