My imac randomly restarts and then takes 45 minutes to load.  What can I do to fix it?

I upgraded to Mavericks as soon as it released a few weeks ago.  This is the only change I've made, no new programs or apps otherwise.  Last week my imac randomly restarted and then took 45 minutes to load.  It's done this about 5 times in the last week.  I need some help resolving this.
I've gone through the disk utility to repair/verify the hard drive, and it's done nothing to solve this issue.
I do have a time machine and am wondering if it would be too drastic to reformat and restore from the time machine.
Any help would be appreciated!  I have work to do! 
Imac 21.5 inch mid 2010, OS X Mavericks

OK here they are:
Hardware Information:
          iMac (21.5-inch, Mid 2010)
          iMac - model: iMac11,2
          1 3.06 GHz Intel Core i3 CPU: 2 cores
          16 GB RAM
Video Information:
          ATI Radeon HD 4670 - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 2:54:13
Disk Information:
          WDC WD5000AAKS-40V6A0 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (277.14 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-STDVDRW  GA32N 
USB Information:
          MICRONET FANTOM DRIVE     2 TB
                    EFI (disk1s1) <not mounted>: 209.7 MB
                    Time Machine Backups (disk1s2) /Volumes/Time Machine Backups: 2 TB (201.03 GB free)
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Wacom Co.,Ltd. CTH-460
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          LaCie P'9231 Desktop Drive 2 TB
                    EFI (disk2s1) <not mounted>: 209.7 MB
                    LaCie (disk2s2) /Volumes/LaCie: 2 TB (1.15 TB free)
          Apple Inc. Built-in iSight
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.rogueamoeba.HermesAudio          (4.1.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.adobe.SwitchBoard.plist
          [loaded] com.crashplan.engine.plist
          [invalid] com.crashplan.engine.plist.save
          [loaded] com.flipvideo.FlipShareServer.launchd.plist
          [loaded] com.google.keystone.daemon.plist
          [loaded] com.leapfrog.connect.shell.plist
          [loaded] com.macpaw.CleanMyMac2.Agent.plist
          [loaded] com.oracle.java.JavaUpdateHelper.plist
          [loaded] com.rogueamoeba.hermes.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.flipvideo.FlipShare.AutoRun.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.wacom.pentablet.plist
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.ARM.[...].plist
          [loaded] com.crashplan.javacheck.plist
          [not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
User Login Items:
          Monitor
          Dropbox
          CrashPlan menu bar
          Google Chrome
          HazelHelper
3rd Party Preference Panes:
          DivX
          Flash Player
          Flip4Mac WMV
          Growl
          Hazel
          MacFUSE
          PenTablet
Internet Plug-ins:
          AdobeAAMDetect.plugin
          Default Browser.plugin
          DirectorShockwave.plugin
          DivXBrowserPlugin.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          googletalkbrowserplugin.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          NP_2020Player_IKEA.plugin
          npgtpo3dautoplugin.plugin
          o1dbrowserplugin.plugin
          OfficeLiveBrowserPlugin.plugin
          OVSHelper.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    LaCie: Disk size: 2 TB Disk used: 846.34 GB
                    Macintosh HD: Disk size: 499.25 GB Disk used: 222.11 GB
          Destinations:
                    Time Machine Backups [Local] (Last used)
                    Total size: 2 TB
                    Total number of backups: 36
                    Oldest backup: 2013-10-25 13:10:19 +0000
                    Last backup: 2013-11-09 15:08:15 +0000
                    Size of backup disk: Too small
                              Backup size 2 TB < (Disk used 1.07 TB X 3)
Top Processes by CPU:
               8%          WindowServer
               6%          PenTabletDriver
               3%          ConsumerTouchDriver
               2%          Google Chrome
               2%          EtreCheck
               1%          Dock
               0%          Dropbox
               0%          CrashPlan menu bar
               0%          fontd
               0%          GoogleTalkPlugin
Top Processes by Memory:
          410 MB             java
          377 MB             Google Chrome
          246 MB             mds_stores
          197 MB             com.apple.IconServicesAgent
          131 MB             Adobe Bridge CS5
          115 MB             Finder
          115 MB             Google Chrome Helper
          82 MB              WindowServer
          66 MB              Dropbox
          49 MB              PenTabletDriver
Virtual Memory Statistics:
          8.92 GB            Free RAM
          5.04 GB            Active RAM
          800 MB             Inactive RAM
          1.26 GB            Wired RAM
          1.65 GB            Page-ins
          0 B                Page-outs

Similar Messages

  • I have windows 7, perfect connection to the internet, but it takes forever for firefox to load pages, sits and thinks for minutes before loading. what can i do?

    i have windows 7, the internet connection is perfect, i use other computers with no problem loading pages. With this pages take forever to load, worse then if i had dialup. I think internet explorer is the same, but i don't use it and it's very out of date. I tried a system restore, it worked for a day then back to the same thing. Pages take minutes to load, any page. some time out. i don't know what to do next, i've cleared history, cache, cleaned the computer up not sure where the problem is or what it is.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Whenever i try to play a video on my iphone, it pauses literally every 2 seconds. i will hit the play button, the video will play for a few seconds and then it will pause again. what can i do to fix this?

    videos will play for a few seconds on my iphone then it pauses. i press play and it pauses again. why is it doing this? and this is for all videos: youtube vides, videos off the internet, videos ive downloaded from itunes

    I can understand this with videos you are streaming, i.e. maybe you have a slow data connection.
    Videos on your phone should not do this.  Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • My 24" iMac just died and will not power-up.  What can I do?

    My 24" iMac just died and will not power-up.  What can I do?

    Bring it into an Apple Store for a free diagnosis and quote for cost of repair/replacement of parts.
    If the costs are $500 or over, consider using the money toward a new or "newer" (used) Mac.

  • Imy phone is automatically restarting and the screen is turning blue what can i do to make it ok again??

    imy phone is automatically restarting and the screen is turning blue what can i do to make it ok again??

    Hey babylovesyou,
    Thanks for the question. If I understand correctly, the iPhone shows a blue screen and is restarting on its own. I would recommend that you read this article, it may be able to help the issue.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

    My nephews iPad Mini is stuck on the lock screen. It's frozen and you can't slide the unlock bar. I tried rebooting it and it didn't work. What can I do to fix it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My IPod touch froze and its not responding at all what can i do to fix it?

    my IPod touch froze and its not responding at all what can i do to fix it?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT3302 My iPod Touch fell into the washer and now does not start. What can I do to fix it?

    My iPod Touch fell into the washer and now does not start. What can I do to fix it?

    If it is totally dry:
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price      

  • When I plug my iPad up to charge it says not charging, and my battery drains very quickly what can I do to fix?

    When I plug my iPad up to charge it says not charging, and my battery drains very quickly what can I do to fix?

    There are two different types of adapters by Apple that look similar. One is a 5 Watt adapter used with iPhones and iPods. The other is a 10 Watt adapter used with the iPad. Other than looking at the text on the adapter, which is hard to read, you can tell the different by looking at the socket the pin part plugs into the adapter. The 5 Watt has two notches and the 10 Watt has only one notch.
    Make sure you use the 10 Watt adapter with an iPad.

  • Spinning a wheel, randomly stops and then takes you to another frame.

    I would like to be able to spin a wheel in flash, this wheel has 8 sections to it split up equally, it spins for a random amount of time, 3 - 7 seconds and then stops. the section which lands on the marker is the result and will take you to a specific frame. Also i would like it when it stops to gradually slow down however this is not vital.
    this code works for just rotating a wheel but i want to know how to randomly stop it and how to take it to another frame.
    onClipEvent (enterFrame){
    this.ang=ang+0.01;
    _alpha=190*Math.sin(this.ang)+190;
    _rotation++;
    _xscale=260*Math.sin(this.ang)+1900;
    i do not know a lot of coding, so do not use complicated words and if you could post how to do this it would help alot.
    thanks

    import mx.transitions.Tween;
    var obj:Object = {};
    start_mc.onRelease=spinF;
    function spinF(){
    obj.x = wheel_mc._rotation;
    var myTween:Tween = new Tween(obj, "x", mx.transitions.easing.Strong.easeInOut,0, Math.random()*360*5, 3+Math.floor(Math.random()*5), true);
    myTween.onMotionChanged = function() {
        wheel_mc._rotation = obj.x
    myTween.onMotionFinished=function(){
    yourmovieclip.gotoAndStop("yourframelabelornumber");
    p.s.  please mark helpful/correct answers.

  • HT1926 I tried to update my itune with the latest update and now I can't use itunes at all . All I get is MSVCR80.dll and then Error7 (windows error 126) what can I do ????

    I tried to update my itune with the latest update and now i can't use itune at all . I have tried reinstalling it . all get is MSVCR80.dll and then I get Error 7 (windows erreor 126) . Need help please .

    Similar problem here.  iTunes11 notified me it was available.  However, auto-update failed.  So, I downloaded for manual update.  That failed with "permission" message.  I am administrator on this machine (WIN7).  I tried uninstalling old version, but it failed with same permission issue.  I now can't start iTunes... throws permission message.  So, I'm completely dead in the water.  Does this stuff get tested before it's shipped?

  • I just bought the a iPod 5th generation and I can't delete my email it keeps down loading back on my inbox over and over it's very annoying what can I do to fix the problem I've reset my mail and it still keeps down loading over and over what can I do?

    I just bought the 5th generation iPod my email keeps downloading over and over when I go to delete my email what can I do I've even reset my email and it still keeps doing the same thing it's annoying what else can I do to fix the problem?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -Delete the account from the iPod and reenter the settings. I do not know what you mean by "reset my email ".
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             

  • Intel iMac Randomly restarts, and delayed boot-ups when powered on from off

    First, bought the iPod (20gig w/ photo display). Love it. Still use it. Never a problem.
    Then bought a MacBook in '06. Love it. Only a few problems along the way but easily fixed.
    So, based on that, bought the 20" aluminum intel-iMac (2.4GHz, 2GB memory, 320HD)in October. Loved it. Never a problem. Not one. Until...
    ...I installed Leopard. What a headache. I've solved all of the problems with help from the forum etc. except one:
    iMac waits 3-20 minutes before it feels like "waking up" after I've powered it on, and when it does finally boot-up into OS it restarts upon a whim, sometimes after half an hour or so and sometimes after just a few minutes. Problem.
    After searching the discussions and reading through the posts I can't find a solution.
    Any suggestions?
    (There's nothing external connected to iMac except the keyboard. There are no 3rd party upgrades. All updates successfully downloaded. And I've unplugged the power cord several times. It is the only way to get the iMac to power on and, eventually, boot up again.)
    Any help is much appreciated.
    Tulliver

    Thanks for the reply, Dennis.
    I was able to try the SMC instructions and use Disk Utility before posting my question. It didn't help.
    Since posting my question I talked to the Apple guys where we purchased our iMac and after discussing the problems they're quite certain it is a hard drive problem. I take it in tomorrow.
    The problem with my post is that I left out the most glaring symptom (good thing I am not a doctor).
    My Mac's start-up disk is not named "Macintosh HD". It was. Now it is named ""?????????. So, even though both "Repair Disk" and "Apple Hardware Test" came up just fine, no problems, there is something wrong with my Startup Disk. I had hoped upgrading to Leopard using the "erase and install" method would fix the problem. It didn't. And I just now brought the iMac to its original "Tiger" state and the startup Disk is still called ""?????????. The Apple guys say HD problem. They'll figure it out for certain on Monday.
    Thank goodness for back-up hard drives.
    Thanks again Dennis for your input.
    Tulliver

  • When i get off the internet and i think i am closing firefox and then try to open it up again it tells me firefox is still running and i need to turn it off or restart my computer before opening firefox again. what can i do to fix this

    also on facebook alot of the buttons and photo don't show up unless you scroll the arrow over the place where the buttons are

    Sounds like Firefox is "hanging at exit". That problem is frequently caused by an Extension or a Plugin. Read all of the following articles.<br /><br />
    #Stop the Firefox process:
    #*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
    #*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
    #*Mac users: http://techheavy.com/2011/02/the-mac-task-manager/
    #Why Firefox may hang:
    #*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
    #*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
    #*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
    #Use Firefox Safe Mode to find a problem with an Extension or Plugin:
    #*Don't check anything when entering Safe Mode, just continue
    #*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
    #*See:
    #**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
    #**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
    #**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • I need help: I've a macbook pro with Mavericks....when I click on the Firefox icon on the fox, it just jumps and then eventually invokes slowly. What can I do?

    basically, when I boot up the mac, I click on the firefox icon...it just jumps and sometimes it executes. I probably would have to wait a bit for trying to get into the browser successfully. Anything I can do? Thanks

    Hi,
    This article [https://support.mozilla.org/en-US/kb/firefox-takes-long-time-start-up] suggests that you
    #Change your homepage
    #Check to make sure your extensions are up to date
    # Check to make sure that your antivirus allows Firefox
    #Check to make sure that you have the preference "Do not load tabs until selected"
    However, I would recommend that you close other programs and clear the cache of the profile to increase the load time. [[How to clear the Firefox cache]] A quicker way to do this if you do not have any immediate data to save is to Reset Firefox. [[Recovering important data from an old profile]]

Maybe you are looking for

  • LabVIEW.ex​e - applicatio​n error

    Hi. I'm trying to use CIN to up-down flip a two dimensional array passed from LabVIEW.  Everything seems to work fine when I run the .vi (flipper.vi).  However, when I run another .vi (save_data.vi) that uses the flipper subroutine, it crashes LabVIE

  • Calendar Event Modification Problem with 2.2

    I don't seem to be able to modify a calendar event like I was able to with 2.1.  When I select the event from the calendar it briefly flashes a screen (which happens so fast I can't really read it) and then dumps me into a screen that I can't open th

  • How to connect second computer to Deskjet 3520 e-All-in-O​ne

    How do I connect a second computer to my printer (see subject line) which is connected to my wireless network. First computer is a laptop and connects fine. Do I have to download drivers etc to the second computer? I have been to the drivers & softwa

  • Messing up my podcasts

    iTunes 7 start to displace my new downloaded podcasts. iTunes 6 used on disk a folder structure like: ./podcasts/<Podcast Directory name> / <Podcast Name.mxx>. iTunes 7.01 download new podcasts directly in the Podcast folder ignoring the existing fol

  • Create a report from ABAP Query (SQ02)

    Hi, guys. I must create a SE38- report that simulate the selection of a query in sq02. How can I do for call the query in my own report? (I know all...user group, name, structure name) I can do other elaboration from data after the calling of the que