My iMac reboots multiple times upon startup.
My iMac reboots one to two times in the morning when I start it up or when it crashes. It seems to crash about once every couple days. When it reboots it also rebuilds spotlight each time. Any ideas? I have only standard software installed.
Launch the Console utility and look for messages around the time of the problem that might explain the cause. If you don't understand what you find, copy a range of messages and paste them into a reply here.
Similar Messages
-
I have a Free Agent external backup hard drive connected to my iMac Intel desktop via USB, I never unplug it. Why do I get an error message, from time to time, upon startup stating, "Disk was disconnected improperly. Always eject disk before disconnecting."?
I never unplug the external harddrive, and the error message comes up only occassionaly upon startup. Maybe the USB connection gets disrupted enough to cause the computer to see it as disconnected and then reconnected while the iMac is powered.
-
just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now
I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend! -
IMac shows multiple times on my Apple TV after installing Yosemite.
After upgrading to Yosemite my IMac show multiple time on my Apple TV.
Weird. Restart everything including your router.
-
Imac beeps 3 times at startup, the original ram was put back into the ram slots, but it still beeps 3 times, how do I fix this
http://support.apple.com/kb/HT1547
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
Your RAM is bad. Make sure you push the RAM firmly until you hear a snap. If that still does not work, you need to purchase new RAM. -
Installed Firefox 4 but wont complete, keep asking me to reboot (have rebooted multiple times)
I downloaded Firefox 4 and it asked me to reboot to complete the installation. I rebooted and when I tried to launch it it keeps asking me to reboot (have done multiple times). I tried to remove the program and start over and when I try and remove the program it asks me to reboot. So, I cant even get rid of it and start over. Ack Help!
I found a dirty solution for this problem:
# I deleted the Firefox folder in Program Files (the profile is not in this folder so I keep all my bookmarks, passwords,...)
# I re-installed Firefox 4
Now Firefox 4 works well without rebooting the computer. -
IMac shows multiple times in Finder
I have an issue in the Finder.
I'm working on my iMac. It keeps showing my iMac multiple times, but I can't connect to any of them, and worst of all, I can't remove them.
Anyone had something like that, or knows how to resolve this?Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Preferences/com.apple.finder.plist and com.apple.sidebarlists.plist. Move the .plists to your desktop.
Re-launch Finder by restarting and test. If it works okay, delete the plists from the desktop.
If the same, return the .plists to where you got it from, overwriting the newer ones.
Thanks to leonie for some information contained in this.
You might need to redo the View settings after an update. -
Loading google multiple times on startup???
with firefox startup google is loaded Multiple times- 20 or more tabs on the tab bar
See:
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols -
Infinity HH5 keeps rebooting multiple times a day
Hello.
I have had normal broadband on the HomeHub3 with no problems for 3 years, BUT I upgraded to Infinity (with HomeHub5) 10 days ago. Ever since I have been on Infinity and the HomeHub5 I get multiple connection problems a day (HH5 goes orange, then back to blue a minute later).
Unfortunately the phone contact I have had with BT has not resolved the issue, so I have come to the forum in the meanwhile, please can someone resolve my problem?
The event log data from HH5>troubleshooting, shows the following data:
BLOCKED 1 more packets (because of Packet invalid in connection)
11:17:32, 23 May. BLOCKED 2 more packets (because of Packet invalid in connection)
11:17:31, 23 May. OUT: BLOCK [9] Packet invalid in connection (Packet not in tcp window: TCP [192.168.1.64]:40851->[65.20.0.43]:993 on ppp3)
11:17:31, 23 May. OUT: BLOCK [65] First packet is Invalid (Packet not in tcp window: TCP [192.168.1.64]:40851->[65.20.0.43]:993 on ppp3)
11:17:07, 23 May. (440800.010000) CWMP: session completed successfully
11:17:07, 23 May. (440799.780000) CWMP: HTTP authentication success from https://pbthdm.bt.mo
11:17:00, 23 May. (440792.810000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
11:17:00, 23 May. (440792.800000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
11:16:58, 23 May. (440790.790000) WAN operating mode is VDSL
11:16:58, 23 May. (440790.790000) Last WAN operating mode was VDSL
11:16:57, 23 May. (440789.060000) PPP IPCP Receive Configuration ACK
11:16:56, 23 May. (440789.040000) PPP IPCP Send Configuration Request
11:16:56, 23 May. (440789.030000) PPP IPCP Receive Configuration NAK
11:16:56, 23 May. (440789.030000) PPP IPCP Send Configuration ACK
11:16:56, 23 May. (440789.030000) PPP IPCP Receive Configuration Request
11:16:56, 23 May. (440789.010000) PPP IPCP Send Configuration Request
11:16:55, 23 May. (440787.520000) PPPoE is up - Down Rate=22352000Kbps, Up Rate=9658000Kbps; SNR Margin Down=5.5dB, Up=5.9dB
11:16:55, 23 May. (440787.510000) CHAP authentication successful
11:16:55, 23 May. (440787.450000) CHAP Receive Challenge
11:16:55, 23 May. (440787.450000) Starting CHAP authentication with peer
11:16:55, 23 May. (440787.450000) PPP LCP Receive Configuration ACK
11:16:55, 23 May. (440787.420000) PPP LCP Send Configuration Request
11:16:55, 23 May. (440787.420000) PPP LCP Receive Configuration Reject
11:16:55, 23 May. (440787.420000) PPP LCP Send Configuration ACK
11:16:55, 23 May. (440787.420000) PPP LCP Receive Configuration Request
11:16:55, 23 May. (440787.400000) PPP LCP Send Configuration Request
11:16:53, 23 May. (440785.420000) CWMP: session closed due to error: No response
11:16:52, 23 May. (440785.010000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
11:16:52, 23 May. (440785.000000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
11:16:52, 23 May. (440784.770000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
11:16:52, 23 May. (440784.730000) PTM over DSL is down after 0 minutes uptime
11:16:49, 23 May. (440781.900000) PTM over DSL is up
11:16:48, 23 May. (440780.050000) PPPoE is down after 39 minutes uptime [Waiting for Underlying Connection (WAN Ethernet 2 - Down)]
11:16:44, 23 May. (440776.940000) PPP LCP Send Termination Request [User request]
11:15:48, 23 May. (440720.070000) Lease for IP 192.168.1.66 renewed by host KatieMarketing (MAC 80:56:f2:36:b8:85). Lease duration: 1440 min
11:15:48, 23 May. (440720.070000) Device connected: Hostname: KatieMarketing IP: 192.168.1.66 MAC: 80:56:f2:36:b8:85 Lease time: 1440 min. Link rate: 144.4 Mbps
11:15:47, 23 May. (440719.970000) Lease requested
11:15:42, 23 May. ath00: STA 80:56:f2:36:b8:85 IEEE 802.11: Client associated
11:15:42, 23 May. ath00: STA 80:56:f2:36:b8:85 IEEE 802.11: Client disassociated
11:14:50, 23 May. (440662.490000) New GUI session from IP 192.168.1.64
11:14:07, 23 May. IN: BLOCK [9] Packet invalid in connection (Invalid tcp flags for current tcp state: TCP [54.230.199.161]:80->[86.168.251.248]:56850 on ppp3)
I believe the key lines are:
11:16:53, 23 May. (440785.420000) CWMP: session closed due to error: No response
11:16:52, 23 May. (440785.010000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
remember this connection failure is happening between around 10-40 times per day.
I have read multiple other posts but the only answer seems to be to install an openreach modem, but BT infinity should work with a HH5, I don't want to be told to buy more equipment please.
I have read: http://www.theregister.co.uk/2014/02/04/bt_home_hub_5_disconnection_mystery/
and BT's response to that: https://community.bt.com/t5/BT-Infinity-Speed-Connection/BT-Home-Hub-5A-dropping-connection-updates/...
How do I know if my HH5 has that configuration fix? I know my firmware number is the same, but it doesn't mean that I have received that configuration fix for that firmware version... is the whole problem because CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username is trying to install that configuration fix but it never completes it?
I have read: https://community.bt.com/t5/BT-Infinity-Speed-Connection/restarts-every-33minutes-speed-fine-sync-al...
Can a MOD install this configuration fix for me please?
Here is the data from the HH5>Troubleshooting>helpdesk:
1. Product name: BT Home Hub
2. Serial number: +068543+NQ50911009
3. Firmware version: Software version 4.7.5.1.83.8.204 (Type A) Last updated Unknown
4. Board version: BT Hub 5A
5. DSL uptime: 0 days, 00:39:09
6. Data rate: 9658 / 22352
7. Maximum data rate: 9658 / 26218
8. Noise margin: 5.9 / 5.7
9. Line attenuation: 27.4 / 24.2
10. Signal attenuation: 27.4 / 20.9
11. Data sent/received: 669.6 MB / 5.3 GB
12. Broadband username: [email protected]
13. BT Wi-fi: No
14. 2.4 GHz Wireless network/SSID: BTHub5-QPZK
15. 2.4 GHz Wireless connections: Enabled (802.11 b/g/n (up to 144 Mb/s))
16. 2.4 GHz Wireless security: WPA2
17. 2.4 GHz Wireless channel: Automatic (Smart Wireless)
18. 5 GHz Wireless network/SSID: BTHub5-QPZK
19. 5 GHz Wireless connections: Enabled (802.11 a/n/ac (up to 1300 Mb/s))
20. 5 GHz Wireless security: WPA2
21. 5 GHz Wireless channel: Automatic (Smart Wireless)
22. Firewall: Default
23. MAC Address: 44:e9:dd:fd:dc:46
24. Modulation: G.993.2 Annex B
25. Software variant: AA
26. Boot loader: 1.0.0
I have also done: http://speedtest.btwholesale.com/
down=21
up=6
ping=43
I ran the further diagnostics but there wasn't any extra information.
I have been told by BT over the phone that there is no phone line fault (and when doing the phone line noise test I cannot hear any crackling).
I just want my internet to not drop out, please can someone explain why it is dropping out and resolve it please?
I have taken a photo of my phone socket in case that helps:Just had another connection drop:
14:48:37, 23 May. (453489.200000) PPP LCP Send Configuration Request
14:48:35, 23 May. (453487.210000) CWMP: session closed due to error: No response
14:48:35, 23 May. (453486.810000) CWMP: Server URL: https://pbthdm.bt.mo; Connecting as user: ACS username
14:48:35, 23 May. (453486.810000) CWMP: Session start now. Event code(s): '4 VALUE CHANGE'
14:48:35, 23 May. (453486.580000) CWMP: Initializing transaction for event code 4 VALUE CHANGE
14:48:35, 23 May. (453486.540000) PTM over DSL is down after 0 minutes uptime
14:48:32, 23 May. (453483.790000) PTM over DSL is up
14:48:30, 23 May. (453481.960000) PPPoE is down after 211 minutes uptime [Waiting for Underlying Connection (WAN Ethernet 2 - Down)]
14:48:27, 23 May. (453478.890000) PPP LCP Send Termination Request [User request]
14:46:17, 23 May. IN: BLOCK [16] Remote administration (TCP [103.27.236.78]:43059->[109.157.48.0]:22 on ppp3)
14:44:40, 23 May. IN: BLOCK [16] Remote administration (TCP [43.255.188.134]:38120->[109.157.48.0]:22 on ppp3)
14:43:11, 23 May. IN: BLOCK [16] Remote administration (TCP [121.88.5.177]:8888->[109.157.48.0]:22 on ppp3)
14:41:59, 23 May. IN: BLOCK [16] Remote administration (TCP [183.136.216.3]:9090->[109.157.48.0]:22 on ppp3)
1. any ideas what the cause was?
2. ok I will find a way to unscrew the front plate and leave it plugged in to the test socket, and see if it goes down again.
3. what is the definition of internal wiring? I imagine it includes filters, but what else exactly?
Cheers again. -
IMac crashes multiple times a day
I need help. I bought my iMac in December 2013 and I've gotten multiple crashes and kernel panicks. Below is the report from the most recent one.
Anonymous UUID: DC1A408B-1D2B-5C60-75D4-47D314ED1F9D
Wed Feb 19 06:06:37 2014
panic(cpu 2 caller 0xffffff800d4dc19e): Kernel trap at 0xffffff7f90faf434, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff7f90faf434, CR3: 0x000000000f064002, CR4: 0x00000000001606e0
RAX: 0xffffff834a88c4b8, RBX: 0xffffff7f8f03b1a8, RCX: 0xffffff834a88c4b8, RDX: 0x0000000000000001
RSP: 0xffffff839dbeb0b8, RBP: 0xffffff839dbeb1c0, RSI: 0xffffff8052a3fd00, RDI: 0xffffff804b2d0a48
R8: 0x0000000000002000, R9: 0x00000000000000ff, R10: 0xffffff839dbeade0, R11: 0xffffff800da89c00
R12: 0x000000000000077c, R13: 0x0000000000000000, R14: 0xffffff7f8f03b1a8, R15: 0x0000000000000000
RFL: 0x0000000000010202, RIP: 0xffffff7f90faf434, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff7f90faf434, Error code: 0x0000000000000010, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff839dbead40 : 0xffffff800d422f69
0xffffff839dbeadc0 : 0xffffff800d4dc19e
0xffffff839dbeaf90 : 0xffffff800d4f3606
0xffffff839dbeafb0 : 0xffffff7f90faf434
0xffffff839dbeb1c0 : 0xffffff7f8efae9db
0xffffff839dbeb1f0 : 0xffffff7f8eff0656
0xffffff839dbeb2a0 : 0xffffff7f8efee9bf
0xffffff839dbeb4e0 : 0xffffff7f8efeb763
0xffffff839dbeb650 : 0xffffff7f8efeb0e8
0xffffff839dbeb6f0 : 0xffffff7f8efed9dd
0xffffff839dbeb710 : 0xffffff7f8efe5255
0xffffff839dbeb9d0 : 0xffffff7f8efd9694
0xffffff839dbeba60 : 0xffffff7f8d9f4d66
0xffffff839dbebae0 : 0xffffff800d60cb1c
0xffffff839dbebb30 : 0xffffff800d5fd7a0
0xffffff839dbebbb0 : 0xffffff800d606c30
0xffffff839dbebca0 : 0xffffff800d603627
0xffffff839dbebd40 : 0xffffff800d605ffe
0xffffff839dbebd90 : 0xffffff800d78232f
0xffffff839dbebdc0 : 0xffffff800d776a10
0xffffff839dbebe70 : 0xffffff800d5fa016
0xffffff839dbebea0 : 0xffffff800d5e46b3
0xffffff839dbebed0 : 0xffffff800d5dda6a
0xffffff839dbebf40 : 0xffffff800d5e4657
0xffffff839dbebf50 : 0xffffff800d83de23
0xffffff839dbebfb0 : 0xffffff800d4f3e06
Kernel Extensions in backtrace:
com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7f8d9e8000->0xffffff7f8da0cfff
com.apple.driver.CoreStorage(380.0)[3927D143-D5D9-34CD-98C2-7A481A48A986]@0xfff fff7f8ef98000->0xffffff7f8f05afff
dependency: com.apple.iokit.IOStorageFamily(1.9)[9B09B065-7F11-3241-B194-B72E5C23548B]@0xff ffff7f8d9e8000
BSD process name corresponding to current thread: launchd
Mac OS version:
13B42
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide: 0x000000000d200000
Kernel text base: 0xffffff800d400000
System model name: iMac14,2 (Mac-27ADBB7B4CEE8E61)
System uptime in nanoseconds: 1869734884952
last loaded kext at 14413891201: com.nvidia.CUDA 1.1.0 (addr 0xffffff7f8ef95000, size 12288)
last unloaded kext at 94911784231: com.apple.driver.AppleFileSystemDriver 3.0.1 (addr 0xffffff7f8f90c000, size 8192)
loaded kexts:
com.nvidia.CUDA 1.1.0
com.kaspersky.nke 1.6.2a12
com.kaspersky.kext.klif 3.0.2a39
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.0f6
com.apple.driver.ApplePlatformEnabler 2.0.9d1
com.apple.driver.AGPM 100.14.11
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleHDA 2.5.3fc1
com.apple.GeForce 8.1.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleIntelHD5000Graphics 8.1.8
com.apple.driver.AppleMikeyDriver 2.5.3fc1
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelFramebufferAzul 8.1.8
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.1.12
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleThunderboltIP 1.0.10
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 650.4.4
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.4.0
com.apple.driver.AppleSDXC 1.4.0
com.apple.iokit.AppleBCM5701Ethernet 3.6.9b9
com.apple.driver.AirPort.Brcm4360 800.21.45
com.apple.driver.AppleAHCIPort 2.9.5
com.apple.driver.AppleUSBXHCI 650.4.3
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.0
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.IOBluetoothHIDDriver 4.2.0f6
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.5.3fc1
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.4fc11
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.7.1
com.apple.nvidia.driver.NVDAGK100Hal 8.1.8
com.apple.nvidia.driver.NVDAResman 8.1.8
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.0f6
com.apple.iokit.IOBluetoothFamily 4.2.0f6
com.apple.iokit.IOSurface 91
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.6d1
com.apple.iokit.IOAcceleratorFamily2 98.7.1
com.apple.AppleGraphicsDeviceControl 3.4.12
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.driver.IOPlatformPluginFamily 5.5.1d27
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.driver.AppleHDAController 2.5.3fc1
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.iokit.IOHDAFamily 2.5.3fc1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleThunderboltEDMSink 1.2.1
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.iokit.IOUSBHIDDriver 650.4.4
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleThunderboltDPOutAdapter 2.5.0
com.apple.driver.AppleThunderboltDPInAdapter 2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily 2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.0
com.apple.driver.AppleUSBComposite 650.4.0
com.apple.driver.CoreStorage 380
com.apple.iokit.IOUSBUserClient 650.4.4
com.apple.driver.AppleThunderboltNHI 1.9.2
com.apple.iokit.IOThunderboltFamily 2.8.5
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.iokit.IO80211Family 600.34
com.apple.driver.mDNSOffloadUserClient 1.0.1b4
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.0
com.apple.iokit.IOUSBFamily 650.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.10
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 21
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1
Model: iMac14,2, BootROM IM142.0118.B00, 4 processors, Intel Core i7, 3.5 GHz, 32 GB, SMC 2.15f2
Graphics: NVIDIA GeForce GTX 780M, NVIDIA GeForce GTX 780M, PCIe, 4096 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454655352D474E4C2D46
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x111), Broadcom BCM43xx 1.0 (6.30.223.154.45)
Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE SSD SD0128F, 121.33 GB
Serial ATA Device: APPLE HDD ST3000DM001, 3 TB
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: FaceTime HD Camera (Built-in)
USB Device: Keyboard Hub
USB Device: Apple Keyboard
USB Device: PTK-640
Thunderbolt Bus: iMac, Apple Inc., 23.10First you need to uninstall these per the developers instructions
com.nvidia.CUDA 1.1.0
com.kaspersky.nke 1.6.2a12
com.kaspersky.kext.klif 3.0.2a39
Secondly, did you upgrade the ram or is the 32gb directly from Apple? -
New X1 box freezes and reboots multiple times
My wife and I just got our X1 box replaced because the old box had a hardware issue that the tech said was due to a loose fan. Somehow, we had the old box set to reboot once a day - can't seem to find out how to set the new box to do so - and the new box, which was installed yesterday morning, has rebooted at least 5 times since the tech dropped it off. Our old box never reset so many times in one day, even when there was a service issue. Can anyone help me with this?
I'm having the same issues. Already had Comcaset internet, but decided to get their TV also. The X1 DVR was installed last Friday. It tends to reboot a few times a day. I've attempted to record 3 shows and only one actually finished out. After that one finished recording, it locked the system up with the record light still going. Last night, during Sharkweek and Hannibal, it rebooted once, then locked up 20 minutes later. I called Comcast today and the guy said that the firmware is out of date and could be causing it to overheat. He was going to start the firmware to download and said to powercycle in 45 minutes. Unfortnunately, I have no idea what the old version was so I don't know if it actually did anything. If it starts acting up again, I'll have a tech come out.
-
Powerbook crashes multiple times every startup--os x?
hello,
i have a powerbook g4 17' in pristine condition which i would like to sell. i reformatted it and am about to put it on ebay, but everytime i turn it on, it freezes either on the gray screen with the apple or right after/or during finder loads all of the desktop items. it usually takes 3-5 reboots before it works fine, as fast as ever. does it have to do with os x 10.4.8 (completely updated)? has anyone else had this problem?
please help,
morganMorgan,
Try doing an erase and install. Instructions can be found on the support site, www.apple.com/support. The name of the article u want is "About the Archive and Install Feature"
In there, follow those directions, but when you click options, select erase instead of archive. If after it is finished, and you still have the same problem, contact applecare to setup a repair.
Jen -
ITunes Library Deleted each time upon startup
Each time I start my computer, my iTunes Library is deleted. All the files are still on my computer, but still playlists, songs, movies, apps.. everything is gone from iTunes. Is it a settings issue? I'm lost. Any ideas?
Your sig states a Sony. Does that mean a Sony Vaio?
If so, read through this older topic. It's some Sony software conflicting with itunes. Redkeefy has a good post on it.
http://discussions.apple.com/thread.jspa?threadID=1800551&tstart=90 -
My niece's boyfriend was messing around with the user names and airport settings and ever since the computer has crashed upon every restart. I tried putting the original software disc to reload the original software and I found out that there is a cd already in the slot. Please help!
THanks!I just ejected the cd using command + option + O + F and then tping eject cd - IT WORKED!!!! Now I just gotta figure out how to get the computer to - NEVERMIND! I GOT IT!!!! THE COMPUTER IS STARTING UP WITH THE ORIGINAL CD!!!!! I'M RELOADING THE ORIGINAL SOFTWARE RIGHT NOW! I appreciate everyone being here even though I figured this one out myself. Can I get a witness??? LMAO!!!!! WHOOOOOO!!!
-
iMac is asking for admin login password upon startup when it never did before, settings are still on auto login. Why is it doing this out of the blue?
Is sounds like it might for some reason booting into Safe Mode, which does prompt for a password.
Try a PRAM reset:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
If that doesn't help, restart holding down the option key which should take you to the startup manager. Select Macintosh HD (you may need to use the arrows on the keyboard if the kb is Bluetooth), tap 'enter'. Does it boot normally now?
Maybe you are looking for
-
When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?
-
Option keys no longer working!
Can any experienced user provide a solution for this seemingly simple problem? Since I upgraded to 10.6.8, my keyboard (first slim version, extended) option keys are dead. All other keys seem to be working normally. Here are just a few problems assoc
-
Is TREX required for CCM 2.0 search?
Hello, Is TREX a manadatory component for CCM 2.0? Regards, Bejoy
-
Custom authenticator problem in 9.1
We are in the proccess of converting to 9.1 and unfortunately it is not going very smoothly. One of the problems we are running into is in our security module. Our custom authenticator appears to be creating the correct MDF file but after reading thr
-
Error in Source system-No entry for user in table RSADMIN Available
I have a user id with SAP_ALL But when i try to create source system, i am getting the follwoing message No entry for <user> in table RSADMIN Available