My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys., My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys.

Who is your ISP?
Power-Cycle the modem... and then ower-cycle the router...then finally power-cycle your computer.

Similar Messages

My MacBook isn't connecting to the Internet. When I try to connect, it shows the signal strength in the top right corner as if it was connected, but the Internet doesn't work. When I go to my network preferences, it says the ip is self-assigned.

My MacBook won't connect to the Internet, but it's connected to my router. When I go to network preferences, it says that it has a self assigned ip address, and can't connect to the Internet. How can I fix this? Please help!

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect?

When I login to Horizon View, it shows me the list of desktops to connect to. If I'm entitled to only one desktop then can View auto connect me to that desktop instead of me clicking on Connect.

Yes you certainly can.
Right click any desktop in the list > Settings > in the left pane select the desktop you want to auto connect to > check "Auto connect to this desktop".

TS4185 my facetime on my mac will not connect with anyone. the other side can see me trying to facetime them but when they try to connect nothing on my side shows connection just keeps trying to ring them.

on my mac desktop, when i try to facetime anyone it doesn't connect. the screen shows that it is trying facetime them and on the other side says that my requests come up and when they try to answer by connecting it wont and on my side all it does it continously trys to ring them and then finally tells me to try again.HELP!

i can face time from my phone and ipad as well but if i call myself from either iphone or ipad to my computer theres no connection

My apple TV will not show my iPhotos travel photos in sequence. I set up a sequence of photos that STAY in sequence when viewing in iPhoto on my iMac, but they do not show in sequence when my Apple TV shows them on my TV screen. My Apple TV is MC 572C/A

My Apple TV will not show my photos in iPhoto on my iMac in the same sequence of images that I can see when viewing the iPhoto photos on my iMac. This is especially frustrating when I try to show my travel pictures in sequence on my TV. I have to resort to showing them on my iMac which defeats the principle purpose for purchasing my MacTV. Does anyone have a solution?
My Apple TV is Model MC 572C/A and the software is 5.2.1 (6025)
My iMac is Mac OSX version 10.7.5
THANKS!
Doug May

I can't recall whether slideshows are ordered by title or date, but you can manually re-arrange the albums in iPhoto, then batch change them once you have the order you want.

Hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m my problem is imac works fine in safe mode,but when you try to startup normal it's connstantly restart by it self.

hello I have imac (27-inch mid 2011) 3.1ghz intel core i5 1tb serial ata hard drive, amd radeon hd 6970m
my problem is
imac works fine in safe mode,
but when you try to startup normal it's connstantly restart by it self.

in safe mode works perfectly,soon as I try to boot in normal mode it's keep restarting.on screen I don't see any line vertical or horizontal picture look normal on safe mode.but unable to start normal it just restarting over and over.I try another HDD but same things happen,I replace memory but still same.works ok in safe mode but not in normal mode.I will try to post system error report.

I upgraded my Iphone, but now I can't connect it to itunes because it is not upgraded. However, when I want to upgraded, it says that my computer (imac) needs to be upgraded to another version. I can't find anything to help me out.

I upgraded my Iphone to IOS6, but now I can't connect it to itunes (10.6.3) because it is not upgraded. However, when I want to upgraded, it says that my computer (imac Mac OS 10.5.8) needs to be upgraded to another version. I can't find anything to help me out.

You need iTunes 10.7 or later.
To get this, you need Mac OS 10.6.8 or later.
You can get 10.6 Snow Leopard here -> http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

When i connect my iphone to my laptop and open itunes it shows my iphone has nothing on it(no music, no movies, etc...) then when i try to sync it says iphone is is full and can only put in a selected amount of songs

when i connect my iphone to my laptop and open itunes it shows my iphone has nothing on it(no music, no movies, etc...) then when i try to sync it says iphone is is full and can only put in a selected amount of songs. Take in mind this is my first time to sync with this laptop(HP 15 ENVY) and as well my laptop is just brand new. just got it a week ago. so how do i fix this prob. and also when i open my itunes store and then view my account it says error occurred either debug it through Microsoft visual studio or close program. I tired copying all the .dll files to the itunes folder didn't help

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

Often, when I connect my iPod Touch to the PC, instead of it showing up as a device in iTunes, a window pops up that says I have connected a camera, and asks what to do. It is really annoying when this happens, because sometimes I cannot update my iPod

Often, when I connect my iPod Touch 2G to the PC, instead of showing up as a device on iTunes, a pop-up appears that says I have connected a camera and asks what I want to do. This device doesn't have a camera in it. When this happens, (not always)I can't update my iPod, no matter how many times I try to connect it. I have an old Nano that has never had this problem at all. Can anyone tell me what to do about this?

Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

My iPhone 5 is not showing up in iPhoto over WiFi. Is this normal? Or will it only show up when I connect with USB ?

My iPhone 5 is not showing up in iPhoto over WiFi.
Is this normal?
Or will it only show up when I connect with USB ?

It will show up, when connected directly by USB as a camera.

TS1369 When I connect my iPod touch to my computer it does not show up! It allways did it before, so I could sync pictures frojm computer to my iPod Touch. Please help what to do!

When I connect my iPod Touch to my computer it does not show up in Itune on the left side and I do not see on the bar "picture", it allways did before.

Here:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When our iPad is in use on the internet, my iMac internet connection goes off. I can't get the two devices to work at the same time with the AirPort Express. Is there a setting somewhere I may have missed?

When two or more devices conflict it typically means that the DHCP service is either misconfigured or is not running at all. DHCP provides IP addresses to local network clients.
Is your AirPort Express base station the only router in your current network configuration? That is, is it connected directly to an Internet modem and not to another router upstream of it?

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access.

Upgraded to Maverick. Now cannot connect to wifi. All my other devices will connect. Have rest wireless hot spot switch and cable modem. Other devices still connect but MacPro does not. MacPro wireless is self assigning an IP address blocking access. It will connect if I connect to my iPhone hot spot via wifi. Any ideas?

If you follow this video you'll see how to delete your WiFi AP from the OS, this will allow you to select it again which I feel will correct your problem.
https://app.box.com/s/fe7v7h7kywjr23spumqp

Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

I keep losing entire events in iPhoto on my iMac. Where an event was, there is a light gray event box displaying a dark gray palm tree and when I hover my cursor over the box, it shows 0 photos are there, where there were once photos.

I keep losing entire events in iPhoto on my iMac. Where an event was, there is a light gray event box displaying a dark gray palm tree and when I hover my cursor over the box, it shows 0 photos are there, where there were once photos. I am operating a 27 inch iMac running OS X 10.9.4. It has a 2.7 GHz Intel Core i5 processor, and its memory is 4GB 1333 MHz DDR3. Is there any way to retrieve the lost photos?

WHat version if iPhoto? Where is your iPhoto library located?
TRy
BAckup your iPhoto library, depress and hold the option and command keys while launching iPhoto until the first aid window comes up and repair permissions and if necessary rebuild your database
LN
Edit

My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys., My imac show self assigned IP when connected to Wi Fi Router. Any Solution Guys.

Similar Messages

Maybe you are looking for