My iMac sound keeps resetting to come out of left or right speaker only.  Why?

I have a new iMac 5k Retina.  With this purchase I also started using some speakers through the headphone jack.  I've noticed this annoying pattern that quite often the sound from the iMac keeps resetting to come out of the left speaker only or the right speaker.  I keep having to reset it to balance them.
Is there a way to stop this?
Thanks.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Similar Messages

  • Why does my sound keep cutting in and out?

    Why does my sound keep cutting in and out?

    Yeah Kase12 I was just wondering if you ever figured out what was making this happen...I have tried replacing all the cables and it still does it...Every couple minutes the sound will cut out for a few seconds then come back on and it might be 30 miniutes before it does it again or it might do every 4 minutes theres no pattern to it
    .If you figured it out could you please shoot me an email at [email protected] thanks

  • Hi. I'm using illustrator cs6 on pc. I've made a scientific figure for a paper and now I'm trying to export as a png or save for microsoft office. Despite my figure being in the middle of my artboard, it always comes out bottom left in the png file or jpg

    Hi. I'm using illustrator cs6 on pc. I've made a scientific figure for a paper and now I'm trying to export as a png or save for microsoft office. Despite my figure being in the middle of my artboard, it always comes out bottom left in the png file or jpg. Must be making a school boy error! Please help!

    In similar cases, my solution is to "select all" then "deselect" only the artwork I want to keep and "delete". If I'm curious I may "cut" then "paste" to see what shows up in the center of the screen. it is usually some stray point. or other element out direct sight.

  • Macbook pro sound defaults to right speaker only

    How do I set the sound output to not change to the right speaker only by default? It resets itself every so often.

    Welcome to Apple Support Communities
    Your graphic is damaged. Take it to an Apple Store

  • How  to  do inner join ,outer join, left join ,right join by using infoset

    how  to  do inner join ,outer join, left join ,right join by using infoset

    Hi
    If you want to make  join ,outer join, left join ,right join then its possible if you are using ODS or direct infoobject (In BW3.5) and if you are using BI7.0 then you also make join ,outer join, left join ,right join with Cube also.
    For making join ,outer join, left join ,right join in infosets you just select your info provider then right click on your infoarea from context menu select info set after doing this one pop-up opens here u define your infoset technical name and give either ODS object name of infoobject name.
    After doing this next screen opens in right hand side your selectes ODS or infoobject shows in graphical format .
    and left hand side it shows one menu bar here you can select another ODS or infoobject for making join ,outer join, left join ,right join .just click on ODS button in menu bar and select ODS drag your selected ODS from Left to right after doing this your selected ODS shown in right hand side window in graphical format you just now after doing this you are able to make join ,outer join, left join ,right join for this first you select field from one ods and drag a line from 1 ods to second ods after doing this one arrow is created from one ods to another ods just right click on arrow  and make join ,outer join, left join ,right join in to your ODS.
    I think its clear how we can we make join ,outer join, left join ,right join in infoset.If you have any further query then welcome.
    Assign Points...............
    Thanks and regards
    Ankit modi

  • How to use iphone as a microphone for the sound to come out in a bluetooth wireless speaker? what app?

    well i want to do the impossible- i think. i want to know if i there is an app that will allow me to use my iphone as a microphone, for the iphone to be able to be connected to a wireless bluetooth speaker, and for the sound, to come out on the speaker. (the voice) without any cables. in order to do some fun stuff like karaoke or just talk.

    Hi redzknzz,
    I see this has been up for over a year with no responses. Did you ever find a solution? I'm interested in something similar. The apps I've seen require the iPhone be connected to a powered speaker with a stereo cable. There are apps that allow you to connect to another iDevice via WiFi, which can then connect to the speaker. No output via Bluetooth yet.
    Have you found anything?

  • Sound effects can't come out from SoundSticks after upgrade to 10.4.4

    After upgrading to 10.4.4, the sound effects of OS X, such as emptying trash, iChat effects, etc, doesn't come out from the SoundSticks (first generation, connected via USB), even though I've turned it (effects) to the highest level, and selected to have it come out of the SoundSticks.
    The effects are fine if I select Built-in Audio as sound output.

    After upgrading to 10.4.4, the sound effects of OS X, such as emptying trash, iChat effects, etc, doesn't come out from the SoundSticks (first generation, connected via USB), even though I've turned it (effects) to the highest level, and selected to have it come out of the SoundSticks.
    The effects are fine if I select Built-in Audio as sound output.

  • HT1379 my imacs sound keeps cutting off

    my imacs volume keeps cutting off and i dont know why...i tried resetting the PRAM and it still cuts off

    I'm having the same problem?

  • Embedding an imovie video (with audio) in Keynote on Ipad, audio only comes out on headphones not external speaker?

    When using imovie on ipad to embed music onto ipad keynote slide, sound does not come out external speaker, only through the earbud jack?  Is there a setting that will allow for sound through the external speaker?

    Two possibilities I can think of. MAke sure that the side button on your ipad is set to screen lock & not mute. If it is set to mute, you'll need to slide it to unmute it before the speaker will work. Otherwise, it sounds like some kind of software glitch. I'd do a reset (I think you hold down the power button & the button on the top for like 10 seconds, until you get the screen asking if you want to turn your ipad off. Follow through, give it a few seconds, then restart it.

  • Popping sound from right speaker only of imac

    I recently bought a (refurbished) September 2013 model imac 21.5".  Looks great, but only one problem when I play any audio/ video, streamed or local, there come a clicking and popping sound from the right side only. Sounds like fireworks from a distance.  No such noise through headphone.  I tried all solutions suggested on different forums.  No success.  Can someone out there help, before I decide to take it to the apple store or return it?

    By starting a new thread instead of re-viving an old one,
    suggestions would be addressed to you directly...
    However you may choose to discuss the matter with
    an Apple Store specialist or Genius, and contact one
    nearest your location for an appointment date/time
    for someone to perform diagnostic testing. If the unit
    is covered under AppleCare or a the complementary
    warranty at that time, further suggestions for repair
    if needed could be discussed &/or arranged.
    See all worldwide telephone support numbers
    Contact a mobile carrier
    Find an Apple Authorized Service Provider
    Visit an Apple Retail Store
    For Apple authorized Sales, Service, Training, Certification
    and Consulting, see these links to locate sources:
    If you are located in the US, then this page may help:
    https://locate.apple.com/ - (page may default to local)
    If you are in another region or country, then this may:
    https://locate.apple.com/country
    In any event...
    Good luck & happy computing!

  • Burned CDs come out with static, and stop/skip.  Why?

    The CDs I've tried to burn come out with fuzzy static and pause momentarily at times. I have tried altering the writing speed (I've tried 1X, 4X, and "maximum possible") and playing the discs in the car, cd player, and computer (all produce the same result). I can hear the music, but with the fuzz and momentary pauses it's annoying to listen to. Also, the burned CDs play at a much softer volume level than, say, the radio in my car--so much so that I deafen myself whenever I change out the CDs and the radio kicks in.
    What's going wrong? Is this an iTunes problem I can fix? The burner is new from Dell a year ago and never been used, so I don't think it's that. I would appreciate any help. Thanks.
    Dell Latitude C840 (PP01X)   Windows 2000  

    Try going to dell.com and download all updates for your system on there site, especailly firmware updates for the CD ROM and BIOs updates and chipset updates for the PC system.
    If that doesn't fix it, goto edit>preferences>advanced tab>burn sub tab and UNCHECK "Sound Check" so they play louder
    If needed we can check and see if the drive is in PIO mode instead of DMA. Does the PC lock up or get really slow when burning CDs?

  • Vocals will only come out of left speaker

    When recording vocals in GB09 sound will only come out of my left monitor. This is the only program that does this. What are some settings that I can check?

    When you first create your 'real instrument' track the default setting is 'stereo'. However, you are inputting a 'mono' signal (your mic) so it will only appear out of one side. In the lower right corner of the inspector where it says 'input source' click on the drop down and switch the setting to 'mono' . Select either mono 1 or mono 2. You should now hear your vocals out of both sides!

  • My screen goes black after about a minute fading out from left to right

    my screen goes to black after about a minute fading out from left to right

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • IChat Audio out of right speaker only

    Not sure what is going on but iChat only sends chat audio only to the right speaker on my MacBook Pro. When in iChat I can launch other programs with sound and it comes out both speakers. My output in preferences is set to the middle also so it should come out both speakers right?

    Hi
    Thats normal in iChat as the mic is close to the left hand speaker, its so you dont get feedback going on.
    Tony

  • Mini CQ10-450CA mono sound (right speaker only)

    Hello,
    The right internal speaker on my new Mini CQ10-450CA seems to be working for both left and right ones since when I test speakers in "Playback Devices / Speakers and Headphones" only the right one produces sounds no matter which speaker I choose left or right.
    With external headphones, the stereo is working just fine.
    I have Windows 7 Starter and all the software up to date including BIOS.
    Can someone let me know if this problem looks to be a hardware issue so the replacement is the only way to fix it?
    Thank you.

    Chinese cannot protect you from this yang disaster, and when I speak it, it never gets out.
    Anyway, story to date.
    The machine was misrepresented when it was sold, and despite 3 weeks of service visits with claims to have been repaired , and the "LEFT SPEAKER REPLACED" it became apparent, ONLY upon having the case opened (prior to being destroyed by the tech) that irregardles of all and any published spec, and the tecnhicians own knowledge of the machine, that there exists no left hand speaker for there to have ever had been repaired OR replaced.
    These specs were edited online on one of two ocurrrences on HPS website that states categorically that they have STEREO SPEAKERS, within hours of an escalation one day. However these are still the specs on the HP Shopping site, and they are clearly viewable.
     |When it became apprent after several weeks that, (WELL WITHIN THEIR OWN cOMPANY repair AND replacement policy)
    that we were dealing with some sort of damaged neanderthal or gorilla, a replacement (3rd offer) was agreed upon and agreed to with the return and scknowledgement of a legall binding document. At this point I had a verbal, and written legally binding agreement, (which she offered as an alternative to keep the case out of small claims court), or as I had alluded to earlier (during the day where the published specs were edited within hours) to conclude this escalated case.
     I waited for my new laptop.
    I waited longer.
    After several more days I calle dback and was then told it was not being approved , and that the replacement they offered now was a machine with none of the funtionality of this one (whereas the policy was to replace it with one thsat has all of the functionality, even if requiring a better unit, that met the advertised specs). 
    HEWLETT PACKARD renegged on this replacement AFTER having accepted the agreement, after further escalations at HP in California, and my having been told gain yesterday that NOW the agrred-upon replacment has approved.
    They have renegged again.
    As I understarnd it, my mother ( unsure as to why she feels to get involved in my absense) spoke to an Escalations Magager Supervisor today and was told that it is being .... in short... I don't know what it is being. Deliberely wasting my time and compounding my complaints by renegging on the original agreement (S).
    As cost was a factor in todays delay (although it hasn't been to date, having cost HP  much more than the origninal post and concluding by them having left me with a further damaged machine than when it started) I suppose it has been left not having been addressed at all. The proverbial,  omnipresent SCRAPIE from "last years model".
    I will suggest to you the following if you have this complaint about this CQ10 machine.
    3) I will contact now all of the Wireless Carriers that sold this ,model during it's promotion and mention the misrepreented product to them. I will point out how this, as it was a misrepresented product at thier level too, NEGATES ALL OF THE CELLuLAR CONTRACTS for SERVICE that axccompanied this purchase on the simple strength that the product legally locked into owning for the duration of the cell contracts, isn't the one we got. (Didn't get what we were sold, or aed for, or promised as delivered).
    4) Contact your individual cellualr carriers and mention this case to them. Tell them you would like the balance of your cellular contracts cancelled, and they should themelves contact Hewlitt-Packard.
    5) Try a differnt colour Cover Up this season. It's Fall. Know your Autumns from your New, Clear, Winters.
    Thus is this case so far. For ALL of this time,, a month, all of these visits, all of these misrepresented "repairs" the facts ramin this notebook is in WORSE condition than when it went for repair, and they are arguing about cost.
    In short, one entire month of "Sit, stay, get angry. Stay angry. Progress nowhere."/ 
    How much does a month of your time cost, America? Mine costs you a FORTUNE. An UNPRECEDENTED FORTUNE.
    This womam at HP, this escalations manager, just worked on one case for one months and achieved LITERALLY nothing. aDRESSED literally nothing. Concluded LItERALLY NOTHING.
    How much is THIS post going to COST YOU, Hewlett=Packard?
    I suggest you procede with cellular data contract cancellations. 

Maybe you are looking for

  • Month calculations: DATE() vs EDATE()

    In a recent topic (Challenge to get a date correctly), I mentioned using the DATE function to calculate a date that is (for example) one month later than a given one. Specifically, if cell A1 contains the given date, then I suggested using this formu

  • Can't type anythings in console mode

    i can see all booting process in CLI mode but can't type anything. Pls help me this.

  • Currency translation on Query level (YTD exchange rate)

    Hi Experts, I want to implment the currency translation logic in query as below. Please advise what I should do. Case 1 Variable entry screen Posting date (range): 01.09.2007 - 31.03.2008 Query result Sales amount figures from 01.09.2007 - 31.12.2007

  • "change" button is not visible in check status ?

    HI, We are under upgrade of SRM 4.0 to SRM 5.0 . In SRM 4.0 "change" button is visible in check status even if shopping cart is under approval state. But in SRM 5.0 "change" button is not visible in check status if Shopping cart is under approval sta

  • PAPI problem

    Hi, We developed one simple process in Aqualogic Studio 5.7 and the same is deployed using Aqualogic BPM process Administrator. The application server used is Weblogic server 9.2. Our requirement is to instantiate/start the process from external Java