My imac turns on with start up sound then nothing else just the timer going round
my imac turns on with start up sound then nothing else just the timer going round
Try restarting holding down the SHIFT key. That will do a directory check in Safe mode. It will take longer to start so continue to be patient.
If it starts in Safe mode, then restart normally and see how that goes.
Similar Messages
-
My mac book pro will not fully boot up. I have the grey background with the apple sign and the timer going round...but 20 minutes later still no desktop
You could try doing a hard shut down (holding the power button or yanking the battery) and then doing a safe boot by holding the shift key at startup:
http://support.apple.com/kb/HT1455
Also, not sure if this applies in your case, but I've had that happen when there's a USB drive inserted either in the computer or a connected external keyboard. I did a hard shut down, removed the drive and it went through a normal start up. -
I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks
If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).
-
this problem started last fall after upgrading to Mavericks. If I shut down my computer (or restart) I have problems getting it going again. This is getting progressively worse. I hadn't shut down in over a month, forgot about this issue and shut down (which I used to do daily), so now I can't get my computer to boot. When I hit the power button I hear it starting, then a loud alarm sounds, then a long pause then start up sound with a gray screen with a progress bar. Once the progress bar fills, the screen goes black again for a bit. This whole process will repeat until I get frustrated and force - shut down by holding the power button. I have tried reseting the pram, starting up in safe mode, starting up with the command - R, starting up with my original install disc... none of it works. I'm at a loss! I do have an external hard drive that I have been using for Time Machine, but it's not recent because the disc needs repairs and I hadn't gotten around to buying a new HD to back up to first. Has anyone else had this problem? I really can't afford a big repair/replacement bill.
A long, steady, load tone followed by a progress bar can indicate it is trying to install a Firmware Update. Any other Tones would be multiple beeps and show an error code.
http://support.apple.com/kb/HT5860
You can also see a progress bar similar to booting into Safe Mode. However, the firmware update bar is thinner vertically than the Safe Mode bar.
http://support.apple.com/kb/ht1455
Either way, I would say something is wrong and it would be better evaluated at an Apple Store as Kappy points out. -
I just got my first ipad. When I turn it on, it briefly shows a start up screen with a "lock" icon then goes black. how to i get started????
I resently purchased an ipad and i think i could help. Does it look like a plug and itunes? Thats what came up on mine. Try pluging it into your laptop and go on itunes. They say the new ipad with ios5, you dont need your computer, then i cant help you there. But go to an apple store they are very helpful. They helped me recently and they are very nice. They could help anyone, from old people, to youngsters like myself. I hope i helped you. I tried my best :)......keep in mind, im only 12
P.s. i purchased my ipad before ios 5 -
After turning on iMAC the sign in page comes up and accept my password. It then goes to a page with a background pictures but nothing else. If I leave it there it eventually fades and shows the clock. How to I get it to open from there?
Hello,
See if it'll Safe Boot from the HD, (holding Shift key down at bootup). -
I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help
Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
Then, install OS X. -
Please help, my iMac will not start up, the apple comes up and the wheel goes round but then I am left with a blank white screen. Has anyone any ideas.
Locate your original install disk (it's grey) and use it to restart your iMac by holding the "C" key during startup. Use the disk utility to repair your harddrive.
-
i was working on mail and arrow with nice airplane sound disappeared and changed to the word sent how do i go back to arrow ?
Launch Mail.
Start "New Message".
Click "View" in the menu bar and then "Customize Tool Bar".
Customize Toolbar sheet should drop down.
At bottom left there is "Show" pop up box, click it and select "Icon and Text".
Click "Done". -
I updated the IPAD with the latest update and now when I turned the IPAD on, I get the itunes logo and then nothing else. How can I fix this to let me use my IPAD?
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary. -
Hello,
My white McBook (2008 or 2009) recently stopped turning on. When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound. I've tried the re-boot option, but nothing works. I first thought I needed a new battery because the lights at the back are all off, but shouldn't the computer turn on once the power adapter is hooked up and the light on the Magsafe adapter shows green? I'm a computer doofus, so please be kind. Please advise! Thanks in advance.
SSTake it in for service.
-
I have apps in my notification center on for notifications (like News apps), with banner and sounds, but i never get the notification from those apps. I tried reinstalling the app and restarting the phone but all in vain
The apps I currently have are for the i phone and i pad but i would like to see this on this computer
On the Mac Air launch iTunes. Then connect either the iPad or iPhone.
Select the iPad or iPhone under Devices left side of the iTunes window in the source list.
Then select Apps from the menu on the right.
If you don't see the apps listed there, from your iTunes menu bar (top of your screen), click Store > Authorize This Computer.
See if that makes a difference... -
I have a mac book pro. 4yrs old. when I'm starting it, its not booting up.. no sound.. no display. just the blinker is coming on. plz help..
Ok..
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
If nothing helped, since you don't hear the startup chord, make an appointment at an Apple Apple Genius Bar or take your Mac to an Apple certified repair provider.
v10.5.6 is an oudated version of Leopard. -
I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!
Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G -
Black box with timer going round keeps showing up!
I keep getting black box with timer going round keeps showing up! I know how to use the memory clear app built in to my BB, I also have Boost memory, I know how to click the browser and then options tik the bottom 2 boxes plus all the rest, I've pulled battery, I also have Bejoose. This just started the last couple days. Its really frustrating to try to type something in an email or FB and have it freeze up for a minute or so. I just don't know what else I can do.
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.
Solved!
Go to Solution.goto options
press BB button to get menu and Enable keyboard
press and hold &%123 key for 3 sec
type -??5* and device analyzer will be enabled
if you mistype it at all, press esc key to home screen and try again.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V
Maybe you are looking for
-
Background job step - Printer - Output device table
Hi, When creating background job, printer- output device also specified for every step. Which table to check for job name and output device combination ? Thanks.
-
Hi All, I have customized the MIGO screen by adding a subscreen with two fields using MB_migo_Badi and the data entered in these fields is saving in a custom data base table using the POST_DOCUMENT method of the BADI. I Need to write the code to disp
-
Subcontracting challen po net value not come in challen
Hi While I taking print of subcontracting challen po net value not come in challen any reply Regards Kailas ugale Edited by: Csaba Szommer on May 9, 2011 10:36 AM
-
Trouble with MS Word after 10.4.3?
After upgrading to 10.4.3, I find that MS Word won't work...it opens and immediately, upon chosing a style sheet, closes down....I can't open documents that I've saved in that format. None of the other programs in Office have this problem so it's app
-
Is Apache OpenOffice 4.0.1 safe to download?
I have OpenOffice 3.3.0 installed from several years ago and wish to update to Apache OpenOffice 4.0.1 and wish to know if this is safe and will a download be stopped by Gatekeeper which is set to accept "Mac App Store and identified developers"? Are