My iMac wake up from a sleep mode and opened " Console". RTC (Alarm)

Hello Apple Communitie,
I have a problem. My Apple Imac warned me of a RTC Alarm. It opened it self while it was in a sleep mode. It Opened Console and this it what it said:
22-11-11 00:36:07,000 kernel: Wake reason: RTC (Alarm)
22-11-11 00:36:07,000 kernel: RTC: maintenance alarm 2011/11/21 23:36:07, sleep 2011/11/21 21:36:11
22-11-11 00:36:07,000 kernel: Previous Sleep Cause: 5
22-11-11 00:36:07,000 kernel: 103260.729211: ar9300WowWakeUp: Skip PCIE WA programming
22-11-11 00:36:07,000 kernel: 103260.729231: setDISASSOC from disconnectVap
22-11-11 00:36:07,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
22-11-11 00:36:07,000 kernel: 103260.753978: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
22-11-11 00:36:07,000 kernel: EIR is supported.
22-11-11 00:36:07,000 kernel: SSP is supported.
22-11-11 00:36:14,000 kernel: AppleBCM5701::selectMedium - autoselect, any duplex, EEE allowed, flow control allowed
22-11-11 00:36:14,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link down on en0
22-11-11 00:36:14,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0300,0de1,0300,45e1,0000]
22-11-11 00:36:14,000 kernel: Graphics suppressed 7160 ms
22-11-11 00:36:14,859 configd: network configuration changed.
22-11-11 00:36:14,862 applepushserviced: <APSCourier: 0x7fa9739033a0>: Stream error occurred for <APSTCPStream: 0x7fa971e15e40>: The operation couldn’t be completed. Socket is not connected
22-11-11 00:36:14,892 configd: network configuration changed.
22-11-11 00:36:16,289 airportd: _doAutoJoin: Already associated to “Ziggo268141”. Bailing on auto-join.
22-11-11 00:36:16,299 airportd: _doAutoJoin: Already associated to “Ziggo268141”. Bailing on auto-join.
22-11-11 00:36:16,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 00:36:16,000 kernel: AirPort: Link Up on en1
22-11-11 00:36:16,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 00:36:16,000 kernel: AirPort: RSN handshake complete on en1
22-11-11 00:36:30,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link down on en0 (wol enabled, BJP 613)
22-11-11 00:36:33,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,0300,0181,0000,45e1,0000]
22-11-11 00:36:33,000 kernel: 103287.068449: ar9300WowEnable: Skip PCIE WA programming
22-11-11 00:36:33,000 kernel: 103287.068500: ar9300SetPowerModeWowSleep: TODO How to disable RXDP!!
22-11-11 00:36:33,424 configd: arp_client_transmit(en0) failed, Network is down (50)
22-11-11 00:36:33,424 configd: bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
22-11-11 00:36:33,424 configd: DHCP en0: INIT-REBOOT transmit failed
22-11-11 00:36:33,424 configd: LINKLOCAL en0: parent has no IP
22-11-11 00:36:33,424 configd: DHCP en0: ARP detect ROUTER failed, arp_client_transmit(en0) failed, Network is down (50)
22-11-11 02:36:30,000 kernel: Wake reason: RTC (Alarm)
22-11-11 02:36:30,000 kernel: RTC: maintenance alarm 2011/11/22 01:36:30, sleep 2011/11/21 23:36:34
22-11-11 02:36:30,000 kernel: Previous Sleep Cause: 5
22-11-11 02:36:30,000 kernel: 103287.587760: ar9300WowWakeUp: Skip PCIE WA programming
22-11-11 02:36:30,000 kernel: 103287.587782: setDISASSOC from disconnectVap
22-11-11 02:36:30,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
22-11-11 02:36:30,000 kernel: 103287.613640: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
22-11-11 02:36:30,000 kernel: EIR is supported.
22-11-11 02:36:30,000 kernel: SSP is supported.
22-11-11 02:36:37,000 kernel: AppleBCM5701::selectMedium - autoselect, any duplex, EEE allowed, flow control allowed
22-11-11 02:36:37,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link down on en0
22-11-11 02:36:37,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2300,0de1,0300,45e1,0000]
22-11-11 02:36:37,000 kernel: Graphics suppressed 7099 ms
22-11-11 02:36:37,102 applepushserviced: <APSCourier: 0x7fa9739033a0>: Stream error occurred for <APSTCPStream: 0x7fa973920ed0>: The operation couldn’t be completed. Socket is not connected
22-11-11 02:36:37,103 configd: network configuration changed.
22-11-11 02:36:37,195 configd: network configuration changed.
22-11-11 02:36:37,198 mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:36:37,000 kernel: [ffffff800e3dea00][AppleMultitouchDevice::willTerminate] entered
22-11-11 02:36:37,000 kernel: [ffffff800e3dea00][AppleMultitouchDevice::stop] entered
22-11-11 02:36:38,485 airportd: _doAutoJoin: Already associated to “Ziggo268141”. Bailing on auto-join.
22-11-11 02:36:38,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 02:36:38,000 kernel: AirPort: Link Up on en1
22-11-11 02:36:38,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 02:36:38,000 kernel: AirPort: RSN handshake complete on en1
22-11-11 02:36:40,461 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:129A:DDFF:FEA2:0533)
22-11-11 02:36:40,461 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:36:52,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link down on en0 (wol enabled, BJP 613)
22-11-11 02:36:54,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, No flow-control, Debug [796d,2300,0181,0000,45e1,0000]
22-11-11 02:36:55,013 configd: arp_client_transmit(en0) failed, Network is down (50)
22-11-11 02:36:55,013 configd: bootp_session_transmit: bpf_write(en0) failed: Network is down (50)
22-11-11 02:36:55,013 configd: DHCP en0: INIT-REBOOT transmit failed
22-11-11 02:36:55,013 configd: LINKLOCAL en0: parent has no IP
22-11-11 02:36:55,014 configd: DHCP en0: ARP detect ROUTER failed, arp_client_transmit(en0) failed, Network is down (50)
22-11-11 02:36:55,000 kernel: 103313.844371: ar9300WowEnable: Skip PCIE WA programming
22-11-11 02:36:55,000 kernel: 103313.844422: ar9300SetPowerModeWowSleep: TODO How to disable RXDP!!
22-11-11 02:37:04,000 kernel: Wake reason: EHC2
22-11-11 02:37:04,000 kernel: Previous Sleep Cause: 5
22-11-11 02:37:04,000 kernel: The USB device HubDevice (Port 1 of Hub at 0xfa000000) may have caused a wake by issuing a remote wakeup (2)
22-11-11 02:37:04,000 kernel: 103314.303280: ar9300WowWakeUp: Skip PCIE WA programming
22-11-11 02:37:04,000 kernel: 103314.303299: setDISASSOC from disconnectVap
22-11-11 02:37:04,000 kernel: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
22-11-11 02:37:04,000 kernel: 103314.414570: setDISASSOCIATE ****STA SYNC DISASSOC SUCCESS
22-11-11 02:37:04,000 kernel: The USB device BRCM2046 Hub (Port 1 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
22-11-11 02:37:04,000 kernel: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
22-11-11 02:37:04,000 kernel: 103314.483313: performCountryCodeOperation: Disconnecting from AP
22-11-11 02:37:04,000 kernel: 103314.483317: setDISASSOC from disconnectVap
22-11-11 02:37:04,000 kernel: HID tickle 203 ms
22-11-11 02:37:04,000 kernel: EIR is supported.
22-11-11 02:37:04,000 kernel: SSP is supported.
22-11-11 02:37:04,000 kernel: AppleBCM5701::selectMedium - autoselect, any duplex, EEE allowed, flow control allowed
22-11-11 02:37:04,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link down on en0
22-11-11 02:37:04,000 kernel: Sound assertion "0 == fAudioEngineArray" failed in AppleHDADriver at line 3047 goto Exit
22-11-11 02:37:06,633 mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:37:06,633 mDNSResponder: DeregisterInterface: Frequent transitions for interface en0 (10.0.0.3)
22-11-11 02:37:06,000 kernel: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2300,0de1,0300,45e1,0000]
22-11-11 02:37:11,042 applepushserviced: <APSCourier: 0x7fa9739033a0>: Stream error occurred for <APSTCPStream: 0x7fa971e1fe90>: The operation couldn’t be completed. Socket is not connected
22-11-11 02:37:11,045 applepushserviced: <APSCourier: 0x7fa9739033a0>: Stream error occurred for <APSTCPStream: 0x7fa971e1fe90>: The operation couldn’t be completed. (kCFErrorDomainCFNetwork error 2.)
22-11-11 02:37:11,045 configd: network configuration changed.
22-11-11 02:37:11,048 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en0 (FE80:0000:0000:0000:CA2A:14FF:FE1B:B266)
22-11-11 02:37:11,049 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:129A:DDFF:FEA2:0533)
22-11-11 02:37:11,049 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:37:11,081 configd: network configuration changed.
22-11-11 02:37:11,084 mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:37:11,084 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en0 (10.0.0.3)
22-11-11 02:37:11,086 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:129A:DDFF:FEA2:0533)
22-11-11 02:37:11,086 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:37:11,000 kernel: en1: 802.11d country code set to 'NL '.
22-11-11 02:37:11,000 kernel: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
22-11-11 02:37:11,000 kernel: [ffffff800e9bd400][BNBTrackpadDevice::init][66] init is complete
22-11-11 02:37:11,000 kernel: [ffffff800e9bd400][BNBTrackpadDevice::handleStart][66] Done
22-11-11 02:37:11,000 kernel: [ffffff801404d000][AppleMultitouchHIDEventDriver::start] entered
22-11-11 02:37:12,079 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
22-11-11 02:37:12,083 configd: network configuration changed.
22-11-11 02:37:12,087 mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:37:12,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 02:37:12,000 kernel: AirPort: Link Up on en1
22-11-11 02:37:12,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 02:37:12,697 airportd: _doAutoJoin: Already associated to “Ziggo268141”. Bailing on auto-join.
22-11-11 02:37:12,000 kernel: AirPort: RSN handshake complete on en1
22-11-11 02:37:13,269 configd: network configuration changed.
22-11-11 02:37:13,274 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:37:13,284 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Probe
22-11-11 02:37:13,285 UserEventAgent: CaptiveNetworkSupport:CaptiveStartDetect:2343 Bypassing probe on Ziggo268141 because it is protected and not on the exception list
22-11-11 02:37:13,285 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - Unknown
22-11-11 02:37:13,287 configd: network configuration changed.
22-11-11 02:37:15,744 mDNSResponder: DeregisterInterface: Frequent transitions for interface en1 (10.0.0.4)
22-11-11 02:37:15,744 mDNSResponder: mDNS_RegisterInterface: Frequent transitions for interface en1 (FE80:0000:0000:0000:129A:DDFF:FEA2:0533)
22-11-11 02:37:16,000 kernel: [BNBDevice::staticKickStartTimerFired] Timer fired with owner 0xffffff800e9bd400
22-11-11 02:37:16,000 kernel: [ffffff800e9bd400][BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========
22-11-11 02:37:17,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Timeout waiting for data
22-11-11 02:37:17,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d6
22-11-11 02:37:17,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:37:17,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] commandSleep in sendData returned an error
22-11-11 02:37:21,000 kernel: [BNBTrackpadDevice][waitForHandshake][70-cd-60-fb-09-c9] Timeout waiting for handshake
22-11-11 02:37:21,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] commandSleep in sendData returned an error
22-11-11 02:37:21,000 kernel: [ffffff800e9bd400][BNBTrackpadDevice::_simpleSetReport][66] ERROR: setReport returned error 0xe00002d6
22-11-11 02:37:21,000 kernel: [ffffff800e9bd400][BNBTrackpadDevice::_resetMultitouchDevice][66] ERROR: _simpleSetReport returned error 0xe00002d6
22-11-11 02:37:25,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Timeout waiting for data
22-11-11 02:37:25,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d6
22-11-11 02:37:25,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:37:35,000 kernel: [ffffff800f4ef000][BNBTrackpadDevice::init][66] init is complete
22-11-11 02:37:35,000 kernel: [ffffff800f4ef000][BNBTrackpadDevice::handleStart][66] Done
22-11-11 02:37:35,000 kernel: [ffffff800bd30400][AppleMultitouchHIDEventDriver::start] entered
22-11-11 02:37:40,000 kernel: [BNBDevice::staticKickStartTimerFired] Timer fired with owner 0xffffff800f4ef000
22-11-11 02:37:40,000 kernel: [ffffff800f4ef000][BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========
22-11-11 02:37:40,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Timeout waiting for data
22-11-11 02:37:40,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d6
22-11-11 02:37:40,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:37:40,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] commandSleep in sendData returned an error
22-11-11 02:37:42,000 kernel: [BNBTrackpadDevice][waitForHandshake][70-cd-60-fb-09-c9] Became inactive waiting for handshake
22-11-11 02:37:42,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] commandSleep in sendData returned an error
22-11-11 02:37:42,000 kernel: [ffffff800f4ef000][BNBTrackpadDevice::_resetMultitouchDevice][66] ERROR: _simpleSetReport returned error 0xe00002c0
22-11-11 02:37:42,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] Became inactive while sending data
22-11-11 02:37:42,000 kernel: [BNBTrackpadDevice][getReportWL][70-cd-60-fb-09-c9] Could not send GET_REPORT command
22-11-11 02:37:42,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d7
22-11-11 02:37:42,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:37:47,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 02:38:00,000 kernel: [ffffff800c722c00][BNBTrackpadDevice::init][66] init is complete
22-11-11 02:38:00,000 kernel: [ffffff800c722c00][BNBTrackpadDevice::handleStart][66] Done
22-11-11 02:38:00,000 kernel: [ffffff8014456e00][AppleMultitouchHIDEventDriver::start] entered
22-11-11 02:38:04,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Timeout waiting for data
22-11-11 02:38:04,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d6
22-11-11 02:38:04,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:38:05,000 kernel: [BNBDevice::staticKickStartTimerFired] Timer fired with owner 0xffffff800c722c00
22-11-11 02:38:05,000 kernel: [ffffff800c722c00][BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========
22-11-11 02:38:06,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] commandSleep in sendData returned an error
22-11-11 02:38:06,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] Became inactive while sending data
22-11-11 02:38:06,000 kernel: [BNBTrackpadDevice][setReportWL][70-cd-60-fb-09-c9] Could not send DATA command via interrupt channel
22-11-11 02:38:06,000 kernel: [ffffff800c722c00][BNBTrackpadDevice::_resetMultitouchDevice][66] ERROR: _simpleSetReport returned error 0xe00002c0
22-11-11 02:38:06,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Became inactive waiting for data
22-11-11 02:38:06,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d7
22-11-11 02:38:06,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:38:07,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 02:38:09,000 kernel: [ffffff800c722c00][BNBTrackpadDevice::init][66] init is complete
22-11-11 02:38:09,000 kernel: [ffffff800c722c00][BNBTrackpadDevice::handleStart][66] Done
22-11-11 02:38:09,000 kernel: [ffffff8014491800][AppleMultitouchHIDEventDriver::start] entered
22-11-11 02:38:13,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Timeout waiting for data
22-11-11 02:38:13,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d6
22-11-11 02:38:13,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:38:14,000 kernel: [BNBDevice::staticKickStartTimerFired] Timer fired with owner 0xffffff800c722c00
22-11-11 02:38:14,000 kernel: [ffffff800c722c00][BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========
22-11-11 02:38:15,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] commandSleep in sendData returned an error
22-11-11 02:38:15,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] Became inactive while sending data
22-11-11 02:38:15,000 kernel: [BNBTrackpadDevice][setReportWL][70-cd-60-fb-09-c9] Could not send DATA command via interrupt channel
22-11-11 02:38:15,000 kernel: [ffffff800c722c00][BNBTrackpadDevice::_resetMultitouchDevice][66] ERROR: _simpleSetReport returned error 0xe00002c0
22-11-11 02:38:15,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Became inactive waiting for data
22-11-11 02:38:15,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d7
22-11-11 02:38:15,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:38:37,000 kernel: [ffffff800e962400][BNBTrackpadDevice::init][66] init is complete
22-11-11 02:38:37,000 kernel: [ffffff800e962400][BNBTrackpadDevice::handleStart][66] Done
22-11-11 02:38:37,000 kernel: [ffffff800d2bfa00][AppleMultitouchHIDEventDriver::start] entered
22-11-11 02:38:39,000 kernel: en1: BSSID changed to 00:26:f2:80:66:84
22-11-11 02:38:42,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Timeout waiting for data
22-11-11 02:38:42,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d6
22-11-11 02:38:42,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:38:42,000 kernel: [BNBDevice::staticKickStartTimerFired] Timer fired with owner 0xffffff800e962400
22-11-11 02:38:42,000 kernel: [ffffff800e962400][BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========
22-11-11 02:38:44,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] commandSleep in sendData returned an error
22-11-11 02:38:44,000 kernel: [BNBTrackpadDevice][sendData][70-cd-60-fb-09-c9] Became inactive while sending data
22-11-11 02:38:44,000 kernel: [BNBTrackpadDevice][setReportWL][70-cd-60-fb-09-c9] Could not send DATA command via interrupt channel
22-11-11 02:38:44,000 kernel: [ffffff800e962400][BNBTrackpadDevice::_resetMultitouchDevice][66] ERROR: _simpleSetReport returned error 0xe00002c0
22-11-11 02:38:44,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Became inactive waiting for data
22-11-11 02:38:44,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d7
22-11-11 02:38:44,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:38:46,000 kernel: [ffffff800cfc9000][BNBTrackpadDevice::init][66] init is complete
22-11-11 02:38:46,000 kernel: [ffffff800cfc9000][BNBTrackpadDevice::handleStart][66] Done
22-11-11 02:38:46,000 kernel: [ffffff800e95de00][AppleMultitouchHIDEventDriver::start] entered
22-11-11 02:38:51,000 kernel: [BNBTrackpadDevice][waitForData][70-cd-60-fb-09-c9] Timeout waiting for data
22-11-11 02:38:51,000 kernel: [BNBTrackpadDevice][getExtendedReport] getReport returned error e00002d6
22-11-11 02:38:51,000 kernel: [BNBTrackpadDevice][updateBatteryLevel] Couldn't get battery percentage from device
22-11-11 02:38:51,000 kernel: [BNBDevice::staticKickStartTimerFired] Timer fired with owner 0xffffff800cfc9000
22-11-11 02:38:51,000 kernel: [ffffff800cfc9000][BNBDevice::staticKickStartTimerFired] ========= Forcing MT restart =========
Can someone tell me what this is, and might give me some advice.
You can also reach me at my mail adres: [email protected]
Thanks,
Mitchell Gonzalez

Perform a hard reset on the Notebook. To perform a hard reset, follow the steps below.
Unplug the AC adapter from the notebook PC.
Remove the battery from the notebook battery compartment.
Disconnect any external devices or peripherals connected to the notebook. Press and hold down the power button for about 15 seconds
After this, update the firmware of your Notebook by downloading it from here Let us know if issue persists even after this done.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Similar Messages

IPhone 4 doesn't wake up from the Sleep Mode

iPhone 4 32Gb doesn't wake up from the sleep mode. When the iPhone goes into the sleep mode, I can't wake it up with the 'Power' button, neither with the 'Home' button. The phone is working, I even can hear the sound of 'unblock' slider if u touch and slide the screen at the place where the 'unblock' slider suppose to be, but the screen remains black. I have to push the 'Home' or 'Power' buttons MAAAANY TIMES to make the screen appear finally. Sometimes I need to push it 30 or 40 times!!! Or I just have to reboot the phone to make it work. But right after it goes into the sleep mode, I can't wake it again But when the phone is connected to iTunes, the sleep mode is working good (one push on the button and the phone is awaken). I tried to upgrade to 5.01 but nothing have changed. Also I've tried to synchronize the phone as 'New', but no luck again, the problem is still on the case. What I have to do? Do someone have the same problem? In Russia we have no official Apple Stores and my iPhone 4 is from Malaysia. So I can't just go to the Apple office and replace the phone. What can I do?

No, I don't have a case only a protective membrane on the screen... and I've tried to reset the iPhone by holding the 'Power' and 'Home' buttons with no result. After this reset the phone is working normally sometimes for about ten minutes (wakes up after one push), but then it's all repeats. And I repeat, that if I connect the iPhone to the PC with the USB-cable, the sleep mode is working fine, just like it should (I can wake the phone with one button push).

C310 Does not wake up from Energy Sleep mode

Printer wont wake up from Sleep mode. I have to unplug the printer from the electrical plug. Then it connects Wireless to my network. This Piece of {Content Removed: Language Filter Evasion} is about to find its way back to the store and I'm going to look at another brand. I have had HP for quite some time. I need Help and don't tell me to call Support unless you can give me someone in AMERICA that speaks english fluently

Me too, I have had the same problem. Numerous hours spent on the phone with HP Support. Tried sequence to get into special support mode but it didn't work. This is my second C310 that has had this problem. I returned my original new one that I bought on HP's shopper site when support determined it was bad. It had the same issue. The last call I made to support they told me just ot wait for new firmware that is supposed to fix this. The do not have any idea when this firmware might be ready. They said just to wait. I have used only HP printers for over 15 years because I believed they were the best printers. I have told several customers, friends, etc to buy only HP printerst, that they were the best. Not so sure I will think that anymore now. We'll see if we ever get that firmware and it works how I feel about HP printers. I really hope it works out but I am tired of waiting.

HP laptop does not wake up from the sleep mode! Urgent help needed!

Hi everyone,
I have purchased HP Pavilion DM4 laptop 3 months ago, for the past month when the laptop goes in the sleep mode ( after being idle for several minutes) and I then try to wake up by hitting any key, even power button, nothing happens. Power light keeps beeping but nothing happens. I have to pull battery and restart the laptop, this is extremly painful as I keep loosing my unsaved documents all the time.
This happens once in every 2 tries. I would really appreciate a help!

Perform a hard reset on the Notebook. To perform a hard reset, follow the steps below.
Unplug the AC adapter from the notebook PC.
Remove the battery from the notebook battery compartment.
Disconnect any external devices or peripherals connected to the notebook. Press and hold down the power button for about 15 seconds
After this, update the firmware of your Notebook by downloading it from here Let us know if issue persists even after this done.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

My ipod 5 laged just now 1st the wifi closed on sleep mode then.i cant touch any thing so i pressed the sleep mode and open again and i phoned that i have 5 iMessages and my ipod bluged into charge but its not then my touch was back and i can do everythin

And thats what happened ... Apple please make wifi always on and.. Make it off when its on dnd mode please

Wifi is turned off due to inactivity and is turned back on when you go to use it

IMac wakes up from sleep independently

My iMac wakes up from sleep mode. Sometimes I have to login, sometimes not. Time Machine is inactive because the external HD is not connected. I´m a new Apple-User, switched just about 14 days ago to Apple and I don´t find a solution for my problem.

I have the same issue. I'm also not using Time Machine on my iMac. It happens within the same couple of hours every few evening. I think it might be a process / update that is looking for updates in the background. I think I'm going to check the logs next time it happens.

Alu iMac wakes up from sleep every night

Since I have installed the last Leopard Security Update my iMac wakes up from sleep every night at 1 pm.
Enyone has an explanation?

I have the same problem, i am located in France and the wake up tile is also 1:00 AM i have some doubt about Elgato Eye TV could be the root cause.
I have seen that in main admin account the eye tv helper task is lauch during logging.
I remove it, and the mini does not wake up this nignt, but ...
When i launch Eye TV, it installed again eye tv helper task...
Are you also and elgato user ?
Pascal

Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the

Would like to use an alarm clock. I need the alarm clock to function from the sleep mode. A review said that MAC products will not allow a program to wake up a Mac. Is this correct ? Are there any products in the Mac store what will function from the sleep mode ? How do I check this out ?

You can set times for your computer to turn on or wake from sleep in the Energy Saver system preference pane using the Schedule... button.

My imac takes about eight minutes to be fully functional after a cold start or from the sleep mode. The hard drive sounds like it has to go through a number of gyrations before being fully loaded. When I first bought the imac start up was much faster

My Imac takes about 8 minutes to be fully functional after a restart or awakened from the sleep mode. I can hear the hard drive making a number of gyrations before it's ready to let me do stuff. This is a 5 year old machine and was much faster in the beginning. Any suggestions?

Impossible to say however it may need more RAM, or if you have been turning it off every day it isn't given the opportunity to run it's daily, weekly and monthly maintenance. This is all done in the background in the middle of the night. I would recommend following the steps in 25 Ways to Speed Up Your Mac until you find the cause of your slowdown.

ITUNES WONT OPEN UNLESS I GO INTO SLEEP MODE AND THEN WAKE.

I recently update to itunes 11. the problem is when it wont open unless i go into sleep mode and then wake the pc from it. Steps first double click on itunes to open it. nothing pops up. in task manager it shows that itunes is running. i press the power button to put the laptop into sleep mode. after about a minute i wake the computer again. wallah itunes is suddenly open. its almost as the sleep mode allows it to open. i dont know what to do ive tried everything. HELP PLEASE!!

ive tried uninstalling and reinstalling. ive tried messing around with bootup prefs. ive tried to see what apple services should be running. ive tried end task itunes then end task other prgrams and tried to open it again. ive tried deleting the sc info folder.

I'm new to the MAC world. I turned my computer on from 'sleep' mode, and a window was up stating that the IOS disk was full; asked me to force quit, then it just froze. It's been 2 hours. Help! I'm worried about losing photos/videos of my children. Thx!

I'm new to the MAC world. I turned my computer on from 'sleep' mode, and a window was up stating that the IOS disk was full; asked me to force quit, then it just froze. It's been 2 hours. Help! I'm worried about losing photos/videos of my children. Im not sure if there's something special I need to do once I turn it back on; in the meantime, its still on... which I'm afraid the picture on the screen will burn into the screen. Does that happen on iMac's? Thx!

Try a hard reset. ( holding Power til it restarts)
Once to your desktop. Click the Apple icon >> About this mac >> More info>> Storage
Once you see what you have the most of. Try to see what you can delete.
Open up any folder>>all files>> or buy an external to store more data.
Once deleting make sure you empty your trash.
If you are new and its a new computer, you might need to bring it to a store for further assistence.
Coast Guard Mechanic w/ an Apple Problem

Monitor goes into sleep mode and will not wake up

My monitor goes to sleep and will not wake up. I try powering off and that will not respond. I have to unplug the workstation and start back up. I have turn off sleep to never sleep and now it just goes to sleep when Im working.

Hello @rosendahl14,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your monitor goes into sleep mode and will not wake up, and I would be happy to assist you in this matter!
To rule out any sleep mode issues with the monitor, I am providing you with some steps you can try below:
Step 1. Unplug the power cord from the back of the monitor and the wall
Step 2. Hold the power button down for at least one minute
Step 3. Plug the power cord back into the monitor and then into the wall outlet (not a power bar or surge protector)
Step 4. Press the Menu button on the monitor
Step 5. Navigate to the Factory Reset option and select it
Step 6. Try a different cable connecting your monitor to your computer
If the above steps did not resolve your issue you can try the monitor on a computer or other device to see if the issue persists. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
To further diagnose a possible hibernation issue with your desktop, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7). I also recommend following the steps below to reset your system's power management settings:
Step 1. Click the Start button
Step 2. In the search box, type "Command Prompt"
Step 3. Right-click Command Prompt
Step 4. Click Run as administrator
Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter
reference: http://superuser.com/questions/669571/windows-8-1-64-bit-power-schemes-gone
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

X58 Pro-E Not able to resume from S3 (sleep mode)

Not able to resume from S3 (sleep mode) if Base Clock is set over 169Mhz
ex. ASUS P6T Deluxe Mainboard fix this issue. - bios version is 1403.
from ASUS site. - Fix System may not able to resume from S3 if Base Clock is set over 170MHz.
Anybody same Problem??

Quote from: AstroRetro on 12-November-09, 21:41:14
I have the exact same issue on my X58 Pro-E.
I can confirm that from 133 to 166MHz S3 sleep works as expected. But above this, the PC appears to go to sleep normally, but cannot wake up. After pressing the power button, the drives spin up and peripherals are powered on, but bios does not load and screen stays blank. Once the PC internal speaker emitted a continuous buzz as well. Machine is unresponsive to power and reset button at this point and I need to hold power button her several seconds to force power off. Then when powering on again, the machine will fail to post again, but this time will automatically reboot, pass post and load windows with all previous applications running as if returning from hibernation.
This issue only occurs when "ACPI standby state" is set to S3 in the Bios. S1 standby state (the default) works fine at all clocks but of course leaves all the fans running. I have tried both states of "Re-call VGA Bios from S3" (Enabled/Disabled) and this has no effect on the issue.
Since this board can happily run at 200MHz FSB with my CPU, and pass all thermal and stability tests I throw at it, it is disappointing that I cannot use this very convenient feature.
I look forward to a beta bios revision to address this issue.
I have the exact same issue on my Pro-E. i've tried everything I can think of, but have had no success. Only S1 works. What's odd is that when I had everything stock, sleep mode in S3 worked great.

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

IMac 24' unexpectedly goes to sleep mode

iMac 24' unexpectedly goes to sleep mode. CPU fan works on 3500rpm, CPU temperature 38'C.

Does not help
Problem stays the same...
Fan increeses speed till 3500rpm, then turns into sleep mode... CPU at 42'C

My iMac wake up from a sleep mode and opened " Console". RTC (Alarm)

Similar Messages

Maybe you are looking for