My iMac wants to connect to symcb
My iMac wants to connect to symcb.com & entrust.net. Are these to be trusted? I do not remember my OS trying to connect to these before I updated to 10.9.4
Hi Don,
I thought for a minute I might have found it. I had a saved search in the "Search For" section that referred to the hard drive on the G5. But unfortunately, removing it didn't prevent the error from showing during startup. If it helps I've attached a screenshot of the error message.
Thanks,
Chris
Similar Messages
-
New iMAC - want to connect PC Laptop to Internet via iMAC Airport
Hello - I have a new IMAC and the Internet connection to the IMAC is fine but I'm having trouble establishing a wireless network.
The store told me that I could use the Airport built into the MAC as a wireless router so that my PC laptop can access the Internet as well. My PC laptop is running Windows 2000 - and I have used it with a wireless router previously.
I can see the iMAC wireless network connection in my laptop's available network; however, I'm unable to connect to it.
Also, my IMAC system properties for Airport indicate that the wireless network is unavailable.
I've not selected any security settings - unless there's some default settings that I'm not aware of.
Advice or suggestions please???The store told me that I could use the Airport built into the MAC as a wireless router so that my PC laptop can access the Internet as well.
That's correct. You will be using your Mac OS X's Internet Sharing feature to share your iMac's wired Internet connection wirelessly, using the iMac's AirPort, to your PC laptop. However, you will not be able to use wireless security, as the only option available (WEP), for Internet Sharing, will only work with other Macs.
To setup for Internet Sharing (Wired to Wireless):
Enable Software Firewall - iMac
System Preferences > Sharing > Firewall
- Click Stop to start the software firewall
Setup the Network
Cable Modem > (Ethernet cable) > [Ethernet port] iMac > (wireless) > PC laptop
Setup Port Order - iMac
System Preferences > Network > Show > Network Port Configurations
- Verify that "AirPort" and "Built-In Ethernet" are enabled.
- Verify that "Built-In Ethernet" is at the top of the list, followed by "AirPort".
- Click "Apply Now."
Configure the Internet Connection - iMac
System Preferences > Network > Show > Built-In Ethernet > TCP/IP
- Configure IPv4: Using DHCP
- Configure IPv6: Automatically or Off
Enable Internet Sharing - iMac
System Preferences > Sharing > Internet
- Share your connection from: Built-in Ethernet
- To computers using: AirPort (checked) (Note: Uncheck all other entries in the list.)
- AirPort Options
-- Network Name: <anything you want>
-- Channel: Automatic
-- Click OK
- Click Start -
My iMac wants to connect to another machine on startup
Hi All,
I purchased a new iMac a few weeks ago and went through the Migration Assistant to move stuff from my old G5. I did it via the ethernet method since I didn't have a fw800/400 cable to connect the 2 machines. There was a slight hiccup in that it didn't want to transfer the applications just all of my other data. I didn't mind and went forward. Now the problem, during the first few days of usage I kept filesharing on the G5 turned on so I could grab various things from its 2nd internal HD. At some point I switched off filesharing on the G5. Now I get error messages (currently during startup) that the machine (the G5) couldn't be found and that I should check my network, etc. For a while I attributed this to the ftp application Transmit. I had a long email thread with the developer because it seemed that every time I started Transmit that warning would come up. He thought it might have been an alias in my Sites folder that Transmit was trying to resolve, but that didn't seem to be the case. As part of the troubleshooting process I set Transmits default folder to be a random folder on an attached USB Drive. So that seemed to stop that warning from happening when I launched Transmit. However during the startup process of the iMac I was getting the error. It seemed to be happening when Transmit's menu bar icon was loading. So I turned off the menu bar feature. Unfortunately the warning is still coming up. So now I am trying to figure out what process is looking for the old G5.
I looked in my Console to see if anything stood out. (I've pasted a snippet below). I see a line item for rpc.statd that references the ip address of the G5, so that looks like something. But I also see that it is after the line where iClip loads. When the machine is booting up I get the error message. When I click 'OK', then the rest of the startup process continues and iClip loads after that. So not sure what that means.
If anyone has any other methods for trying to figure out what is trying to contact the G5 I would greatly appreciate it. Its really getting annoying now.
Thank You,
Chris
7/20/11 4:03:30 PM SecurityAgent[148] Showing Login Window
7/20/11 4:03:31 PM kernel NTFS driver 3.4 [Flags: R/W].
7/20/11 4:03:31 PM kernel NTFS volume name backup, version 3.1.
7/20/11 4:03:39 PM SecurityAgent[148] User info context values set for chriscatalano
7/20/11 4:03:40 PM SecurityAgent[148] Login Window Showing Progress
7/20/11 4:03:40 PM SecurityAgent[148] Login Window done
7/20/11 4:03:40 PM loginwindow[46] Login Window - Returned from Security Agent
7/20/11 4:03:40 PM loginwindow[46] USER_PROCESS: 46 console
7/20/11 4:03:40 PM com.apple.launchctl.Aqua[158] launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
7/20/11 4:03:40 PM com.apple.launchd.peruser.501[156] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
7/20/11 4:03:40 PM loginwindow[46] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
7/20/11 4:03:40 PM com.apple.loginwindow[46] 2011-07-20 16:03:40.241 loginwindow[46:107] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio, 262): no suitable image found. Did find:
7/20/11 4:03:40 PM com.apple.loginwindow[46] /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
7/20/11 4:03:40 PM loginwindow[46] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x1006066d0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
7/20/11 4:03:40 PM com.apple.loginwindow[46] 2011-07-20 16:03:40.243 loginwindow[46:107] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x1006066d0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
7/20/11 4:03:41 PM kernel NTFS volume name backup, version 3.1.
7/20/11 4:03:41 PM SystemUIServer[161] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
7/20/11 4:03:41 PM SystemUIServer[161] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x103627700 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
7/20/11 4:03:41 PM com.apple.launchd.peruser.501[156] (com.apple.Kerberos.renew.plist[199]) Exited with exit code: 1
7/20/11 4:03:41 PM com.apple.launchd.peruser.501[156] (0x100300610.mach_init.switchboard.sh) Failed to check-in!
7/20/11 4:03:41 PM com.apple.usbmuxd[37] HandleUSBMuxDictionary client 0x100304ce0-iTunesHelper/com.apple.iTunesHelper using library usbmuxd-211 built on Jan 13 2011 at 04:19:31, running usbmuxd-211 built on Feb 8 2011 at 13:49:43
7/20/11 4:03:41 PM UserEventAgent[194] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
7/20/11 4:03:41 PM UserEventAgent[194] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x10050dd20 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
7/20/11 4:04:22 PM iClip[229] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
7/20/11 4:04:22 PM [0x0-0x1d01d].com.inventive.iClip[229] SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x2e25000, p = 0x2e25026, pEnd = 0x2e25027)
7/20/11 4:04:22 PM [0x0-0x1d01d].com.inventive.iClip[229] SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x2e25000, p = 0x2e25026, pEnd = 0x2e25027)
7/20/11 4:04:22 PM [0x0-0x1d01d].com.inventive.iClip[229] SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x2e25000, p = 0x2e25026, pEnd = 0x2e25027)
7/20/11 4:04:22 PM [0x0-0x1d01d].com.inventive.iClip[229] SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x17b51a70, p = 0x17b51a96, pEnd = 0x17b51a97)
7/20/11 4:04:22 PM [0x0-0x1d01d].com.inventive.iClip[229] SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x17b51a70, p = 0x17b51a96, pEnd = 0x17b51a97)
7/20/11 4:04:22 PM [0x0-0x1d01d].com.inventive.iClip[229] SystemFlippers: didn't consume all data for vers ID 1 (pBase = 0x17b51a70, p = 0x17b51a96, pEnd = 0x17b51a97)
7/20/11 4:04:42 PM kernel en1: 802.11d country code set to 'US '.
7/20/11 4:04:42 PM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
7/20/11 4:05:03 PM rpc.statd[39] Failed to contact host 192.168.1.3: RPC: Port mapper failure - RPC: Timed outHi Don,
I thought for a minute I might have found it. I had a saved search in the "Search For" section that referred to the hard drive on the G5. But unfortunately, removing it didn't prevent the error from showing during startup. If it helps I've attached a screenshot of the error message.
Thanks,
Chris -
Hey guys! I want to connect my Imac 21 " with my Tv just for fun. Does anyone know , how it works?
Selecting the correct adapter and cable depends on which year model iMac you have and what inputs the TV has?
Check the User's Guide that came with your iMac or your Spec's at > Apple - Support - Technical Specifications
to see if your iMac has a Mini-DVI or Mini DisplayPort and then select that adapter with the correct connection for the TV.
Example: if you have a 2010 or 2011 iMac and an HDMI ready TV, then you would want the > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.) -
I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?
For the "Arangements" option to appear, the external display must be turned on with the correct input selected and connected to the computer. Then close system prefs, reopen, go to "Display" and "Arrangement" will be along the top.
-
ust installed update10.6.8 on my imac restarted and opened safari i have little snitch, it said xdefender wants to connect with apple, i let it. but after i thought has a malware been installed and os update rooted it out? kindly advise
i have this sorted, a misunderstanding it was not xdefender trying to connect with apple it was XProtect Updater from apple.
jcher -
iwant to connect my iphone to imac and to see the pictures, i want to connect my iphone to imac and to see the pictures
it require iphoto and iphoto should auto start when the iphone is connected if it don't you should be able to manually start the app in programs
-
Hi I got a iphone 5 today and I want to connected to me Itunes and is a no connection, Im trying to update the software in my Imac 9,1 but it sees is updated I download itunes 10.7 and it sees i need onother update I try to do it again and sees sotware updated software but i go and updated and is sees no.
What version of OS are you running on your iMac 9,1?
-
I have an IMac OSX and a 2013 MacBook Air and I want to use the screen on my IMac. I have purchased the cable and connected, but the IMac will not connect to my MacBook. I have tried the Command/F2 but it does not work. Any help would be appreciated.
Target Display Mode 2009 & 2010 iMacs
Target Display Mode 2011 & Later iMacs
iMac- How to use your iMac as a Target Display Mode display
Target Display Mode- Frequently Asked Questions (FAQ) -
Want to connect android tablet to imac
i want to connect my imac to an android tablet? do i need to download a file?
Interesting. I bought a Plantronics 650e bluetooth headset to use with my iphone and Powerbook (Skype). The Plantronics site said it was compatible with the iPhone and capable of multipoint bluetooth pairing with two other devices. I've tried two of the Plantronics headsets and found that they work fine when only paired with the iPhone. However once I pair it with the Powerbook I find that the iPhone will not talk to the headset again unless I re-pair the headset to the iPhone bluetooth. However once I turn the headset off or talk to it with the Powerbook bluetooth it will no longer work with the iPhone. I'm starting to think that the iPhone is broken with respect to multipoint paired bluetooth headsets or at least this Plantronics one. Does anyone have an iPhone working with a bluetooth headset that is paired with multiple devices at the same time? Which one? Do you have any tips on getting it working?
-
My iMac often wants to connect to the wrong network
I live in a retirement community that has wi-fi. Their system doesn't allow devices to see each other, so I paid for regular cable Internet access and plugged in my wireless router. It's in the room with my wife's iPad and allows us to connect with our wireless printer as well as each other.
The trouble is, a couple of times per week I discover my iMac trying to connect to the other Wi-Fi (there's a logon screen to connect). I have my own network at the top of my Preferred networks. My wife's Mac doesn't seem to have this problem, it stays with the wireless router network.Did you click OK after making sure your network is at the top of the list?
Open System Preferences > Network > Advanced > Wi-fi and drag your Wi-Fi network name to the top of the Preferred Networks list then click OK. -
IMac won't connect to network laser printer
Hi,
I've recently purchased a new 27" iMac 3.4 GHz with 16 GB RAM running OS 10.6.8. Everything has been running smoothly until this morning when I accidently switched off my HP LaserJet 4000n. After I turned it back on, I found that I could no longer print from the iMac to the Lasterjet any more. So, (stupidly) I thought I'd remove to printer from the Fax / Printer selection in System preferences and simply click + to add new printer and reinstrall the HP LaserJet 4000n. But here's the problem, my new iMac won't let me add a new printer because it can't find the HP LaserJet. I have tried everything. I even got a message saying the Appletalk was not turned on - interesting as 10.6.8 doesn't have appletalk any more. I did however find that Appletalk had been switched off on the G5, so I clicked it back on, but i still couldn't locate the HP LaserJet on the iMac. I can get the iMac to print if I connect to the HP LaserJet 4000n as a shaed prionter by turning on the G5 and using the Bonjour shared prointer facility, but I got the imac so I could sell the G5. I don't want to have to keep turning on another computer just to print off a recipe for chicken soup.
I spent about 6 hours on the phone to Apple support today with an elevated support person, but even they gave up in the end after we had tried everything. I even tried to copy the system file to another HD to see if I booted up just form the system if it would connect to the printer in the absence of all applications, but couldn't as i kept getting an error type 8003 message about 45 seconds into the copy process. As you may imagine I am seriously frustrated and not a little pee'd off.
Any clues as to what's happening, and also, how come the Apple support guy didn't ask me if i had backed everything up on Time Machine - which I do. Odd.
It's probably too late fore that option now anyway as he got me to renew the DHCP leases - so my router will have different numbers now.I'm using the same printer with my late 2010 iMac (3.2GHz i3, 27") running OS X 10.6.7.
Took me a long while to get it to work, because I'd had it set up to work with my G4 running OS 9 via AppleTalk, and the iMac needs to connect via IP.
The setup that finally worked for me -
In the Print/Fax control pane in System Preferences, click the add button. In the Add Printer window, click the IP item in the header bar. In the new screen -
Protocol - set to "HP JetDirect - Socket"
Address: enter the IP address of the printer. If you don't already have that, you need to get it from the printer itself. To do that, use the "Menu" and "Item" buttons on the printer to step through the various offerings until you get to the Configuration page - select to print that page. The printer's IP address will be included on that page.
The IP address was not included on that page when I first printed the page. I think this was because it had originally been set up to use AppleTalk. The solution was to do a Cold Reset of the printer. To do that, turn the printer off. Hold the Go button down and turn it back on. Release the Go button when you see resetting activity in the message screen on the printer. Once I did that, the next time I printed the Configuration page the IP address was included.
Leave the rest of the Add Printer screen blank.
That should take care of it. -
Can anyone help? My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.
First run Software Update to make sure your iMac is up-to-date.
Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences -
Want to connect 2 cinema display
hi i want to connect 2 cinema display to an iMac what do i have to do? is it compatible? what do i have to bue?
thanks
peterIf you don't need high speed for one display, you could use a USB to DVI adapter
<http://www.gefen.com/kvm/dproduct.jsp?prod_id=4517> -
Airport does not want to connect to a weaker signal
my airport has decided that it does not want to connect to a weaker signal. at home if i am next to the wireless source my computer connects just fine, but if i go downstairs to my room the signal strength starts dropping and then will disconnect all together and i am unable to connect again. the signal strength is strong enough to connect because my computer connected just fine before and i tried it with my brothers computer (he has a 15in macbook pro) and it connects just fine. any suggestions? thanks
=)-SamIam-(=yes everything connects to the same wireless internet. i did notice i had a harder time connecting around the time i upgraded to 10.5.6. (i cant remember for sure)
i don't think it matters but i am not connecting to a AP base station at home. We use our iMac for our wireless internet. but even if i am not at home i cant connect to any wireless signal while others around me are connecting to a free service in town. (i used to be able to connect to the same service in town to which i can not anymore)
i did notice that when i open my MBP and wake it form sleep i am able to connect for a couple of min, then the signal gets weaker and weaker until it disconnects and i am not able to connect again.
thanks
=)-SamIam-(=
Maybe you are looking for
-
My wife gave me her older ipad. I have reset and removed all data. My Apple ID (Ipod touch) is not an email adress, but when I try to stu up the ipad it asks for my Apple ID, then tells me that for security reasons the Apple ID must be in email forma
-
I use JBuilder 8 to develop Java projects and everything's fine. however when I try to compile / run a java file in DOS CLI mode, error pop-up: C:\>java Error opening registry key 'Software\JavaSoft\Java Runtime Environment\1.4' Error: could not find
-
JFreeReport(By using Table Model)
Hi, Good Evening I got the sample coding for JFreeReport from jfreereport-0.8.3-A4.pdf.I understand the coding. But I couldnot understand What are the required libraries and how to add all in to my program.I didnot know how do set 'jfreereport-0.8.3.
-
Preparing to copy hang on iPhone6+
Syncing with iTunes and restoring from my old iPhone 5S, all my apps move over seamlessly, but on photos and music, VERY little has moved. Randomly selecting songs/photos to copy over. Syncing hangs on Step 7, Preparing to copy items stage, with no
-
Java 7 to remote in a windows based program
I am running OS X 10.9.3. I installed Java 7 yesterday to set up my remote access to a windows based program at my work. I cannot access all of my work because one program says I need to have Java 1.6.0_31 but I installed Java 7. I'm not sure if I