My iMac will not boot up from the Leopard upgrade disk nor will it eject it.
My iMac is very slow and sluggish. Followed online instructions to use the Disk Utility to run repair. After doing so it told to reboot my system from the install disk and then run the Disk Uitility to run repair from it. I put in my Leopard upgrade disk and tried to reboot. I get the chime and the Apple logo and hear the disk trying to be read, but after about 5 minutes my iMac shuts completely off. I have tried to eject the disk using all the methods found in the community and nothing works. I want to try my orignal Mac OS X install disk to see if that works. My computer is about a 2007 model. It worked great until just a couple days ago. Frankly I can't afford to take it in so I will have to figure this out on my own with your help. :-(
I cannot open terminal. When booting I get the gray screen with the Apple logo and the twirling comb goes for a while and shut the computer completely off.
I got into the single-mode user and learned the following: disk1s3: I/O error. SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Singleuser boot -- fsck not done
Root device is mounted read-only.
If you want to make modifcations to files: /sbin/fsck -fy
/sbin/mount -uw /
I typed in the drutil eject and got:
SAM Multimedia: Read & Write failed, SENSE_KEY = 0x03, ASC = 0x02m ASCQ = 0x00.
Library not loaded. Reason: not suiteable image found.
It did find:
/system/library/rivateframeworks/installserver.framwork/versions/a/installserver : unknown file type, firfst eight bytes: 0xCA 0xfe 0xba 0xbe 0x00 0x00 0x00 0x04 Trace/BPT trap.
I have tried holding the left mouse key, the eject key and nothing happens. To bad I can't pull the
thing out with tweezers.
So where do I go from here?
Similar Messages
-
my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?
Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao. -
FCP Studio will not boot up after Snow leopard upgrade.
Everything was working fine on Leopard but decided to upgrade to Snow Leopard. Now the program stats up and we get to the splash screen then it quits. Anybody help me? so far Snow Leopard has been a complete waste of time, After effects on Mac will not work now either.
They all work except FCP 6 and After effects cs3. FCP is my main worry. I have a deadline to finish.
-
Tiger on a G5 will not boot even from the CD after PS failure
While the G5 was running, it has a abrupt power supply failure. Since it was just out of extended warranty, I bought a power supply and installed it. After pressing the power button, it only gets as far as the gray screen with the Apple logo. After a minute, the fans start on high. Trying to start on the CD, both Apple and Techtools, and the same happens. Safe mode and single user has the same effect, just to the gray screen with the Apple logo.
But when Command, Option, Shift, and Delete are held down, the screen tries to start with some text and then shows the "must restart" box similar to a kernel panic.
I can run the hardware test and the hardware checks out fine.
I tried unplugging the HD, re-setting teh PMU (if I did it correctly), and safe start. All with the same results.
Any ideas?
Thanks for looking.This may be too little, too late for you, though I hope it's helpful, but maybe someone perusing this discussion might benefit:
My problem has been slightly different; my computer, after a few months of perfect operation has started to suddenly shut down.
No one has yet mentioned in this discussion that certain G5s have a hardware problem that Apple will fix for free. See:
http://www.apple.com/support/imac/repairextensionprogram/
and
http://www.apple.com/support/imac/powersupply/repairextension/
My G5 apparently qualifies for this repair. Now to see if my Italian dealer will honor it . . .
I HAVE POSTED THIS ELSEWHERE FOR PEOPLE WITH SIMILAR PROBLEMS
CIAO! -
Will not boot up from DVD drive
HP pavilion slimline s3200n will recognize the DVD drive but it will not boot up from the drive
Hi,
Try hitting the escape button from boot up. It normally gives you the boot options where you can select the DVD drive.
If you can't get into the boot options, try getting into the bios with F10 and change boot order options.
Greetings
Philippe
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future! -
IMac 27 inch i7 OSX Lion will not boot up from Hard Disc
iMac 27 inch i7 OSX Lion will not boot up from Hard Disc on cold start, and cannot find wifi hardware in the machine. Restart and everything is fine. I have two machine and they behave the same. Software or hardware problem?
First of all, try a hard restart; making sure no disks are in the slot, unplug everything from your computer (keyboards, mice, etc.) and then unplug the computer itself. Leave it unplugged for a minute or two, then plug it back in and boot it up.
If that fails, reboot it while holding down the option-key on your keyboard. The screen should show a choice of which disk drive to boot from. Choose your usual drive.
If that fails, reboot it while holding down the shift-key on your keyboard. It should take a while for it to boot up, as it is destroying all connections to sources that may contain a virus.
If that fails, reboot it while holding down keys "option-command-P-R" until you hear the startup tone a second time.
If that fails, reboot it while holding down the C-key. Make sure you have inserted the installation disk before doing this step.
If that fails, reboot it while holding down the command-key and the R-key.
If that fails, please reply to this and let me know. -
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
2005 mac mini on OSX leopard will not boot up from firewire disk
I have an old mac mini that my son still uses and the super dirve does not work any more. But now the main hard disk needs to some attention from Disk Utility. So I need to boot up from the Leopard install DVD. But of course the DVD dirve does not work so how to do this? I have tried to create a bootable disk by restoring the install DVD to a partition on a firewire drive and this is seen as a bootable drive by my 2008 iMac, but not by the Mac Mini. So is it possible to boot up rom a irewire drive? USB doesn't work either
Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed. -
I have a MacBook Pro that will not boot up. The apple symbol is there and the spinning wheel keeps spinning. Any idea how I can fix this?
Reinstall OS X.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
OR
Reinstall Snow Leopard without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
V3-5727105 will not boot up from HDD or from Recovery CD.
4 weeks ago when I switched on my laptop I got a blue screen message during start-up saying a problem had been encountered and it needed to restart to try to fix the problem, then just a dark grey screen and nothing.Laptop is only 7 months old. Contacted Tech Support and they stated I needed Recovery CDs and provided me with a set after I paid £60.Tried to boot from Recovery CD and got Acer Recovery Management to load, but after selecting restore to factory settings the laptop entered into a never ending cycle of 'analysing HDD' , attempting to fix HDD'.Left the laptop running for 12 hours and that was the only two messages I saw on the screen.No option to 'exit as problem encountered' so I had to power down my laptop to escape the 'loop'.Tech Support now wants me to try to format my HDD by taking my laptop to a local PC repair shop.Why am I being asked to do all the diagnosis work on a 7 month old PC? Surely it should be fixed under the manufacturers warranty?Could someone please explain what trying to format my HDD will show?Thanks
Update ..... My laptop would not boot up from the recovery disc as it turned out the hard drive required to be re-formatted to clear the fault. I was told by the PC Repair company that no matter what I tried I would not have been able to fix/clear the fault. Given it appears to have been a software corruption issue, after reading the Acer Warranty I have found out that I have to pay for the repair as the machine hardware remains in g.w.o. and the laptop is back in full working order once again. The PC Repair man did say however that if I had phoned him first instead of Acer Technical Support, I would not have needed to pay Acer for the set of Recovery discs as he would have provided a fresh installation of Win 8.1. at a fraction of the price! Lesson learned.
-
I updated my iPhone 5S to iOS 7.0.2 and iBooks will not load anything from the Store- I cannot search or even view my purchases.
Also Safari keeps crashing. I have shut down the phone and restarted it twice and that hasn't helped. Any ideas?Libellen wrote:
I updated my Iphone 5s with IOS 7.0.5
The Update would not have Installed if it was not suitable for your Device.
Libellen wrote:
... anyhowe the phone is now totaly "dead" and will not turn on
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
HP Pavilion Slimline s3707c PC will not boot up all the way
HP Pavilion Slimline s3707c PC will not boot up all the way; gives the following message:
Entering Setup
<F10=setup> <F11=System Recovery
<Esc=Boot Menu> <F9=Diagnostics>
Tried to install recovery disc; did not respond.
[Personal Information Removed]Hi wjackson95,
When you get to the screen mentioned below, can you press the F11 key to enter the Recovery system that is on the hard drive? Alternatively, if you can press F10, you can go into the BIOS and change your boot order to put your disc drive before the hard drive so that the PC boots to your Recovery discs. NOTE: You may have to press F10 or F11 multiple times to get it at the right time.
You might consider opening your PC to see if it has dust buildup. If your PC has overheated, it can cause it to not boot. It can also cause heat damage to the interal parts.
For more detailed boot troubleshooting, see this HP Support document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00899280&cc=us&lc=en&dlc=en&product=3882331
Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
My HP mini 210 will not boot up. The repair utility starts, but runs and runs with no results.
My HP mini 210-2080NR will not boot up. The repair utility starts, but runs and runs with no results. Safe mode start up also fails. Tried BIOS diagnostics with f10, memory passed, but HD startd but did not finish. Diagnostic log shows rusult 0303. Any ideas would be helpful. Thanks.
You can order HP recovery media here, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx -
I have seven(7) podcasts on my iPhone 4 that iTunes will not delete. iTunes copies them from the phone to the library and will not delete them from the phone when deleted from the library. I have replayed the podcasts over and over and they still won't delete. Podcasts are WSJ Tech briefings.
This happens to several of my podcasts whenever an updated iOS comes out. You can delete the episode directly from the phone by swiping it from left to right. That seems to fix the issue (they drop off the phone and dont reappear on iTunes). It's as if iTunes stops tracking the play count for some shows.
Hope this helps! -
Lightroom 4.1 will not import video from the Olympus OM-D EM-5
Lightroom 4.1 will not import video from the Olympus OM-D EM-5. It sees the files in the import dialog, but it fails during import.
Here's a post concerning 5D MKIII file corruption, which may also be due to a camera malfucntion. Yes, there could be something wrong with your camera.
http://forums.adobe.com/message/4882852#4882852
SUGGESTION:
Install the Canon EOS Utility that came with your camera. Also check for an updated version of the EOS Utility after the install. You need to install from the CD first before you can install any updates.
http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_5d_mark_iii#Driver sAndSoftware
If the EOS Utility can download the CR2 files to your hard drive, then your camera is not defective.
Maybe you are looking for
-
Splitting an event takes more than 3 min
Hi, I have about 8.000 photos in my library and 2.500 photos in a single event. Now I want to extract a set of pictures from this event and move it in a new event. Is there a faster way doing this than splitting the event before and after the set of
-
When every I try to play music, it says the error code 805a193. I looked up this error code on Bing, and it says it occurs when you try to download an app. Please help, trying to listen to my music, and this is the second major problem with a Nokia 9
-
well i just received a Zen Sleek today for Christmas and so far the only problem im having is that the software is not working on my computer. I think the CD ROM Dri've on my comp is messed up so I was just wondering if there was some way I could dow
-
How do I properly pass values into an input parameter form and app module?
Using JDeveloper 11.1.1.4 I created an application module that calls a PL/SQL procedure that uses input parameters. I exposed this to the data control and dropped the object on a jsff as a input parameter form. I need to set some of the input paramet
-
Be crafull with updating to Lion. I lost all my backup and my mac got realy slow... Any suggestion if it is possible after all to recover my old back up from the time capsule? I guess it lost though.