My iMac will not upgrade from 10.8.5 to 10.9.3

I am currently running Mac OS 10.8.5 which I purchased via APP Store. I have downloaded the free Mac OS 10.9.3, which claims it is compatabile with Mac OS versions 10.6.8 and higher. However, when I try to run the download, it says that I need version 10.9 in order to upgrade to 10.9.3. I cannot download version 10.9 because only 10.9.3 is available at the App store, or on the Apple web site. My latest Mac OS boot disc is Snow leopard, as I purchased Mountain Lion via App store and do not have a hard copy DVD from which to restore. How do I solve this dilema without restoring operating system to Snow Leopard. Is there a work around? Please advise!!

If you actually went to the Mac App Store and "purchased" Mavericks, then baltwo's answer is your only choice. Nobody here can fix a problem with the Mac App Store.
If you didn't get the Mavericks installer from the Mac App Store and instead downloaded the 10.9.3 Update from Apple Downloads, then you're doing it wrong. That update is for updating 10.9.x to 10.9.3 (or possibly just from 10.9.2 depending on which one you downloaded). To go from 10.8.x to 10.9.x requires the Mavericks Upgrade which is only found in the Mac App Store.

Similar Messages

  • Original iMac will not boot from new disk

    I am having considerable difficulty getting a new disk to boot in an original 'Bondi blue' iMac.
    I think I have researched this issue reasonably well and found a few references to it but no solution. I have more resources than most and have tried every trick I know. The story at the following link is not dissimilar to my experience:
    http://www.applefritter.com/node/20518
    Details:
    iMac - original 233 MHz revision A with 160 MB RAM
    New disk - 120 GB 7200 rpm Western Digital disk type WD1200SB
    Format - HFS+ with 7 GB first partition and 107 GB second partition
    Jumpers - both CD and disk set to master - normal for this iMac I believe
    The iMac will seldom boot from OS X 10.3 on first partition or OS 9.2.2 on second partition with or without the other OS totally removed. I have reformatted several times and played with several disk drivers. I have zapped PRAM a few times. I sometimes get a grey screen but more frequently get a flashing question mark.
    I can mount both volumes when booted from a CD and every test shows that they behave as expected. The disk boots properly in a G4.
    I am prepared to try anything but I would particularly appreciate advice from somebody who knows what the problem is.

    Eureka - it works - thanks very much.
    It now boots from OS 9.2.2 on both partitions every time. I have yet to replaced the OS X that I removed earlier but I am not expecting difficulties.
    My view is that http://docs.info.apple.com/article.html?artnum=25249 is badly written. I assume that item 4 should read 'OS X' and not "Mac OS". It may have been written on the assumption that users only want OS X and Classic on a single partition. My experience, particularly with early iMacs, is that it pays to have 2 bootable partitions and it is expedient to have OS X on one and OS 9.2.2 on the other with the OS 9.2.2 being used for Classic and for direct booting into OS 9.2.2.
    My error was in paying insufficient attention to
    http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/stdadp.php?p_faqid=1277&pcreated=1095792241#jumper
    which clearly indicates jumper positions for single drives although a few words about it would underline the point. I had already discovered that these iMacs normally have both CD and disk set to master so should have realised that strictly they are 'single drives'. I had initially used the clear, but misleading, drive silk screen printing, ie CS, slave, master to set the jumper but should have changed it when checking the WD site later. Perhaps they could use this thread to update their FAQs - I will mention it to them.
    In answer to those, on this thread and elsewhere, who were not happy with my sloppy copying of OS 9.x, I discovered some years ago that as long as you 'blessed' the end result in situ with one of the free OS 9.x updaters it is surprising what you can get away with. - I am not advising anybody to do this unless it is within the terms of their Apple license!
    Now I wonder if I should stick with OS X 10.3 or if it is worth trying OS X 10.4 with
    http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto.htm l
    Does anybody know how satisfactory it is and if it has serious memory or speed implications? My only slightly unusual software is Cisco VPN client.

  • IMac will not boot from any mode except Target Disk

    I have an Early 2008 Penryn iMac 24" MB398LL/A running OS X 10.7.4 (see specs below) that will not boot from ANY mode, It also has several strange vertical bars from top to bottom on the screen. They are about 10 px wide, with some pixels empty and looks a bit like a barcode if you squint at it.
    I have tried Safe Boot, Force Boot, DVD Boot, FireWire/USB Boot,  and it always gets to the same point. It gets to the apple screen with the spinning gear and then after about 8 seconds it freezes. The only way it works at all is in Target Disk Mode. It pops right up on my Macbook Pro and I was able to grab all my info!
    I have run Disc Utilities and Tech Tool on it many times from my MBP and it passes every test.
    I reformatted the HD and installed 10.7 again, it still freezes up at the same point. 
    I have tried using Single User mode and every time have had to run /sbin/fsck -fy twice because it always says the disk is ok but it was modified on the first pass.
    I thought maybe it had a bad video card or logic board but and I ran the Apple Hardware Test on many occasions and it always passes. Recently I was told about Loop Mode and just completed running the AHT for just over 30 hours without any errors at all.
    UPDATE...
    Strange Part… I tried installing Mountain Lion in Target Disk Mode and everything went smoothly. When it restarted on its own the lines on the screen were gone for the moment, but the Mac still freezes up on the spinning gear and immediately restarts on its own.  I have run every thing listed above on it and still nothing. Sometimes the lines reappear then in two more starts they are gone.
    I did manage to have it start one time got a copy of the  the error report (its at the bottom too) The Mac ran for at least 30 minutes with no problems, then the screen went crazy a few seconds and it became unresponsive. The mouse moved but that was all it could do. Now my iMac continually restarts itself, I don't have any more ideas, HELP!
    Specs...
    The iMac "Core 2 Duo" 3.06 24-Inch Aluminum (Early 2008/Penryn) features a 3.06 GHz Intel "Core 2 Duo" processor (E8435), with two independent processor "cores" on a single silicon chip, a 6 MB shared level 2 cache, a 1066 MHz system bus, 2 GB of RAM (800 MHz DDR2 SDRAM, PC2-6400), a 500 GB (7200 RPM) Serial ATA hard drive, a vertically-mounted slot-loading DVD±R DL "SuperDrive", NVIDIA GeForce 8800 GS graphics acceleration with 512 MB of GDDR3 memory, a built-in iSight video camera, and built-in stereo speakers underneath the 24" glossy TFT Active Matrix LCD (1920x1200 native) display.
    Error Report…
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0

    Here is the complete error log...
    Sat Sep  1 17:13:12 2012
    panic(cpu 0 caller 0xffffff801a4b7b95): Kernel trap at 0xffffff7f9bab8654, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000010, CR3: 0x0000000011803000, CR4: 0x0000000000000660
    RAX: 0x0000000000000001, RBX: 0xffffff8050e00000, RCX: 0xffffff801aa8eb00, RDX: 0xffffff80602dba38
    RSP: 0xffffff80602dbb60, RBP: 0xffffff80602dbb60, RSI: 0x0000000000000000, RDI: 0x0000000000000000
    R8:  0x0000000000000000, R9:  0x00000000000000ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
    R12: 0xffffff8050e00000, R13: 0x0000000000000000, R14: 0x0000000000000002, R15: 0x0000000000000000
    RFL: 0x0000000000010246, RIP: 0xffffff7f9bab8654, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000000010, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff80602db800 : 0xffffff801a41d5f6
    0xffffff80602db870 : 0xffffff801a4b7b95
    0xffffff80602dba40 : 0xffffff801a4ce4ad
    0xffffff80602dba60 : 0xffffff7f9bab8654
    0xffffff80602dbb60 : 0xffffff7f9baa218c
    0xffffff80602dbbb0 : 0xffffff7f9baa20e2
    0xffffff80602dbbd0 : 0xffffff7f9ba73554
    0xffffff80602dbc00 : 0xffffff7f9aa8d470
    0xffffff80602dbc40 : 0xffffff7f9aa8d3df
    0xffffff80602dbc60 : 0xffffff7f9aa926ec
    0xffffff80602dbcf0 : 0xffffff7f9aa8af20
    0xffffff80602dbd20 : 0xffffff7f9aadacc7
    0xffffff80602dbd70 : 0xffffff801a833b9b
    0xffffff80602dbdc0 : 0xffffff801a862d57
    0xffffff80602dbe30 : 0xffffff801a497cef
    0xffffff80602dbe80 : 0xffffff801a420abd
    0xffffff80602dbeb0 : 0xffffff801a410448
    0xffffff80602dbf00 : 0xffffff801a4195fb
    0xffffff80602dbf70 : 0xffffff801a4a5ad6
    0xffffff80602dbfb0 : 0xffffff801a4ced13
          Kernel Extensions in backtrace:
             com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000->0xffffff7f9aab8fff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
             com.apple.NVDAResman(8.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aad8 000->0xffffff7f9addafff
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
             com.apple.GeForce(8.0)[4B9BE287-5251-398E-96B0-BB16C9BFB2D9]@0xffffff7f9ba72000 ->0xffffff7f9bb34fff
                dependency: com.apple.NVDAResman(8.0.0)[6A699209-FB98-316B-A3C0-DCA82AA8C86B]@0xffffff7f9aa d8000
                dependency: com.apple.iokit.IONDRVSupport(2.3.4)[99CA4184-8D92-31B2-8726-46139E8E3DFF]@0xff ffff7f9aac4000
                dependency: com.apple.iokit.IOPCIFamily(2.7)[8C9E06A4-13D0-33F5-A377-9E36F0ECC229]@0xffffff 7f9aa4d000
                dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[2600903C-EEDE-321B-A023-169DC9B26EA6]@0 xffffff7f9aa81000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    12B19
    Kernel version:
    Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
    Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
    Kernel slide:     0x000000001a200000
    Kernel text base: 0xffffff801a400000
    System model name: iMac8,1 (Mac-F227BEC8)
    System uptime in nanoseconds: 26349024446
    last loaded kext at 22534854703: com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2 (addr 0xffffff7f9c489000, size 12288)
    loaded kexts:
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
    com.apple.driver.AppleHDA          2.3.0f2
    com.apple.driver.AppleTyMCEDriver          1.0.2d2
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
    com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMuxControl          3.2.6
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.GeForce          8.0.0
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ApplePolicyControl          3.2.6
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleIRController          320.15
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.AppleFileSystemDriver          3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.1
    com.apple.driver.AppleFWOHCI          4.9.5
    com.apple.driver.AppleUSBHub          5.1.6
    com.apple.driver.AirPortBrcm43224          600.36.17
    com.apple.iokit.AppleYukon2          3.2.3b1
    com.apple.driver.AppleAHCIPort          2.4.0
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleUSBEHCI          5.1.5
    com.apple.driver.AppleUSBUHCI          5.1.5
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.DspFuncLib          2.3.0f2
    com.apple.iokit.IOAudioFamily          1.8.9fc9
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.nvidia.nv50hal          8.0.0
    com.apple.NVDAResman          8.0.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.3.0f2
    com.apple.iokit.IOHDAFamily          2.3.0f2
    com.apple.iokit.IOSurface          86.0.2
    com.apple.iokit.IOBluetoothFamily          4.0.9f8
    com.apple.driver.AppleGraphicsControl          3.2.6
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleSMC          3.1.3d11
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleUSBMergeNub          5.1.5
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.2.0
    com.apple.iokit.IOATAFamily          2.5.1
    com.apple.iokit.IOUSBFamily          5.1.6
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
    Graphics: NVIDIA GeForce 8800 GS, NVIDIA GeForce 8800 GS, PCIe, 512 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0x2C00000000000000, 0x38485446313238363448445A2D3830304531
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.16)
    Bluetooth: Version 4.0.9f8 10405, 2 service, 18 devices, 1 incoming serial ports
    Serial ATA Device: WDC WD5000AAKS-40YGA1, 500.11 GB
    Parallel ATA Device: MATSHITADVD-R   UJ-875
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1a100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Hub in Apple Extended USB Keyboard, apple_vendor_id, 0x1002, 0x1d100000 / 2
    USB Device: Trackball, 0x046d  (Logitech Inc.), 0xc404, 0x1d120000 / 4
    USB Device: Apple Extended USB Keyboard, apple_vendor_id, 0x0204, 0x1d110000 / 3

  • Ipad 4th gen will not upgrade from v 6.1.6 to 8, have current update on Itunes

    I have a 4th generation touch which will not upgrade. I did all the steps I could find, but have not done a reset. I have a current v of Itunes on my laptop which is on a windows operating system. I can down load apps and there is no problem in recognizing my account. I can not upgrade some of my apps because my ipad is not up on its version. Anyone know how to fix this?

    The fourth generation iPod touch can't be updated past 6.1.6; iOS 7 requires at least 512MB of RAM, and iOS 8 requires a dual-core processor.
    (114731)

  • IMac will not boot from Snow Leopard DVD or original Leopard disc!

    Hey,
    I am going mad! I am trying to update my iMac (with original Leopard installed) to Snow Leopard. Here is what I have tried:
    Using the Snow Leopard DVD:
    - A standard install: the disc ejects after about 15 minutes.
    - Put another working DVD in and verified it in Disk Utility, all ok.
    - Verified the internal hard drive in Disk Utility, all ok.
    - Verfied the SL DVD, all ok.
    - Decided to try a clean install, so backed up everything.
    - Tried to boot from SL DVD by using the Utilities option, it ejects the disc at restart.
    - Tried to force it to boot to the DVD by restarting and holding the C key, it ejects.
    - Restart holding the Option key, it ejects.
    - Restart holding the Ctrl, Alt and Option keys, ejects.
    - Everytime it ejects and starts up normally.
    - So I cleaned the disc, updated all the firmware, reset the NVRAM/PRAM via holding keys when restarting, and repaired disc permissions.
    - Tried to force it to boot again, ejects.
    - Tried to put the disc back in straight after it ejects with all the steps, still starts up normally.
    - Changed the start up disc in System Preferences to the SL DVD, restart, it ejects.
    By now I am readying the noose...
    - Dug out the original Leopard installation CDs.
    - Repeated all the forced boot restarts (C key, Option key, Ctrl, Alt, Option keys), same story.
    - Repeated changing the start up disc in System Prefs, same story again.
    - Call Apple Support, they told me to try everything I have tried and that the DVD drive is dodgy, well it works with everyhting else! Burning and reading! I really don't want to have to go to an Apple Store- it's miles away (a costly journey) and I just do not have the time for all of this.
    RAWR! Does anyone know what to do? Please? S.O.S.?

    Possible scenarios:
    1: The 10.6.3 SL retail disk is bad, it happens.
    2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
    3: Your optical drive is funky or some other hardware issues.
    4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
    5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
    Possible solutions.
    1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
    http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
    2: Make a SL bootable USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
    If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
    1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
    2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
    3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
    4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
    My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

  • Adobe Acrobat 8 professional Mac will not upgrade from 8.1.5 to 11.0.9

    Hi:
    I have Adobe Acrobat 8 professional for Mac version 8.1.5 trying to upgrade to 11.0.9 but when I download the update it fails to grab the application. Although its visible, to advise to install the update it will not allow me to click on update. I am using a MacMini running on
    Mac OS X Lion 10.7.5.
    Any assistance would be appreciated.

    From AA 8, you have to purchase the full AA XI. There is no upgrade for products before AA 9. You should not have been able to purchase XI from Adobe as an upgrade with only 8 as the prior product.

  • IMac will not wake from sleep after 10.4.8 Update

    Recently after a couple of software updates my IMac goes to sleep and the Bluetooth keyboard and mouse will not wake it. The option for wake with Bluetooth is checked. I zapped the PRAM and also checked the HD, Nothing has changed. NOTE: No new software or hardware installs were done except for 10.4.8 update and the other mac software updates. This did not happen in prior versions of the OS on my iMac. Is this a new bug?
    iMac G5 1.8 (pre iSight)   Mac OS X (10.4.8)   Bluetooth, Wake from Sleep

    I've been dealing with this same issue, have tried everything, but to no avail. After MANY sessions on the phone with Apple tech support, as well as an Apple product specialist, I was advised to erase my computer and do a fresh install. I did an archive an install, which didn't help, but am not thrilled about the prospect of erasing everything and starting over. This problem started after the August 2006 round of updates. I feel it's bluetooth related, because I used a usb keyboard and mouse for a week as a test, with no problem. The funny thing is, I unchecked "allow bluetooth device to wake computer" thinking it might help, but the bluetooth devices continue to wake the computer anyway (except when it refuses to wake, of course!)
    Jerry

  • After installing mavericks, the iMac will not wake from sleep properly (at all)

    I've upgraded to 10.9 (late 2012 21" iMac), and I notice in the morning when the iMac has been sleeping overnight, it will not wake up,
    During the day, if it sleeps for a few hours, it seems fine, and wakes normally, prompting me to type my password,
    In the morning however, I hit a key (on my wireless keyboard), and the display wakes up, I get a dark grey screen, and see the loading circle (not the beachball) in the middle, and see the cursor for a few seconds, before it then disappears, and reappears.
    This cycle repeats itself,
    The 'fix' is to do a forced shutdown by holding the powwer button until it shuts down, and then restart.
    Anyone else find this problem/find a solution?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Will not upgrade from snow leopard

    have snow leopard 10.6.8 but it will not download mountain lion what could be the problem?
    Have and Imac

    Your iMac needs to meet the technical requirements and then you have to buy it from the App Store.
    http://www.apple.com/osx/specs/

  • After upgrading to Maverick, my computer will not upgrade from 10.6.8 to 10.9.5 My editing software will not run on my current version and I need this for my job! Please any help would be SO greatly appreciated!

    Computer won't upgrade to 10.9.5 after Mavericks update.

    This is all a little confusing now...let's stop and get the basics down so Chris and I are on the same sheet of paper:
    What MacBook Pro do you have and how much memory and how much free space on the hard drive?
    From the apple left side of the menu bar, About This Mac, More Info, System Report, Hardware and what does it show for Model Identifier?
    You currently have Mac OS X 10.6.8 installed, downloaded 10.9.x from the Mac App Store?  If so there should be an Installer for Mac OS X in the Finder, Applications folder if it has not yet installed.  Exactly what does it give as the name for the installer and how big is it, should be a little larger than 5 GB.

  • Start up disc problems and my imac will not boot from the cd.

    Hi All,
    I have a start up disc that needs repaired, according to ONYX so then reading the apple support guide it seems I boot from my OSX CD that came with my iMac and use First Aid. However when I insert my OSX CD my imac reads it fine, as it does with any other cd, yet when I re-boot, holding down C, it won't boot. It restarts, but fails then to read the CD and just re-boots again, and again, and again. 
    How can I fix this?
    Thanks all, I appreciate it.
    From abour this MAC:
    OSX 10.6.8
    2.93 Ghz Intel Core 2
    8gb 1333 DDR3
    Start up disc Mac HD

    thanks, but disc is spotless.
    When I put the disc in while machine is on it is read perfectly, appears immediatly and can be opened with no issues. It is only on re-boot ti then appears not to engage with the system.
    I was advised to re-boot holding the "c" button from the MAC forum which I have done. I have also restarted using the restart button on the OSX disc loading screen.
    mark

  • I cannoy download the latest version of Itunes it will not upgrade from the current version

    I cannot upgrade my current version of Itunes to the current version Is there any help available?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
         C:\Program Files\Common Files\Apple\Mobile Device Support
         C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
    tt2

  • IMac will not start up - blue screen after months of Leopard use

    I have an iMac G5 that will not start up. It hangs at the blue screen, but does not have the issue with the ApplicationEnhancer.bundle file. It will start up in safe mode.
    This iMac will not start from a bootable external drive (the external drive can be used as a start up disk successfully with my iBook G4). The iMac's internal drive can be used as a start up disk for the iBook (via the target mode) and does not appear to have any problems. Does this seem like it is a hardware issue with the iMac? The iMac also hangs at the blue screen if I attempt to start up with the Leopard install disk after using the startup disk preference pane in safe start mode.
    I have repaired permissions, verified the disk, etc., using the disk utility. I have cleared caches, preferences, and so on, using Mac HelpMate.

    It may be that some of your login items might be incompatible with the mac. Also, try booting up from the install disk and repair your disk.

  • My iMac will not wake up from sleep after upgrading to OS X Mavericks

    After upgrading to OS X, my iMac will not wake up from sleep.  Each time I have to do a hard restart.  Is there a fix for this problem?

    Hi,
    I have just had the same problem with my iMac and after upgrading to Mavericks my iMac would not wake without pressing the power off button and re-booting.
    Anyway, I have since done a complete new install on my iMac and have gone 5 days without an issue with the iMac not waking.  It was a bit of a pain to do but my own view so far is that the problem is linked to the upgrading of the OS instead of a clean install.
    My iMac now flies with a new OS installed instead of an upgrade.

  • White iMac will not boot after 10.6.8 upgrade

    I downloaded the 10.6.8 upgrade last night. This morning, the white plastic iMac will not boot.
    I have tried evey known keyboard option.
    I have tried booting from the snow leopard dvd.
    I have zapped the pram.
    Nothing!
    Please, any help would be great.

    We bought 2 iMac's 27inch with i7 Quad-core. Did the update a couple of hours ago. My Mac asked to reboot after update, but i didn't accept and worked with iTunes for a while. Then rebooted manually. After reboot it took about 15 minutes to reboot (light-blue screen with nothing on it, not even a mouse). My Wife also did the update of 10.6.8 and rebooted when asked. Her iMac also took 15 minutes to reboot, bus update was unsuccesful! So did update again and then denied reboot and rebooted manually! (Apple-logo and then choose "restart").
    When we did that, iMac was very fast and updateproblem was solved! So deny reboot and reboot manually and problems are over. Same deal with 2 brandnew iMac. I'm guessing this is an issue. To much of a coincidence for me!

Maybe you are looking for