My Imac won't recognize my SD card?

I put my 8gb SD card in the slot, properly, and unlocked, and it does not show up on my desktop or finder or disk utilities. How do I get it to recognize the card so I can download pictures off of it

Do you have your Finder Preferences set to show external disks on the desktop? And is your reader USB? Readers to fail - they are just hardware and can (and will) fail at some point. Do you have another card reader and/or have you tried it on all your USB ports (to rule out a port problem)?

Similar Messages

HT4623 after updating to iOS 6.0.1 my iphone 3s won't recognize my SIM card. i updated my phone through iTunes, what happened to my phone?

after updating to iOS 6.0.1 my iphone 3s won't recognize my SIM card. i updated my phone through iTunes, what happened to my phone?

If it now says "invalid" or "unsupported" SIM, your iPhone was almost certainly hacked to unlock it from the original cell carrier and updating has now removed that hack and the iPhone has relocked back to that original carrier. You will have to contact that carrier and ask if it would be possible to get your iPhone officially unlocked.
Regards.

I changed batteries in my Apple track pad and now my iMac won't recognize the UBS keyboard

I changed batteries in my Apple track pad and now my iMac won't recognize the USB keyboard

Please read and use Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad

Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop. How do I get it to recognize it again?

Iphoto won't recognize my memory card anymore (since a month ish?) but the mac itself does and puts the icon on the desktop. How do I get it to recognize it again?

Thank you so much for responding. I will look for the other disks.
One more question - I initially decided to do this because my Mac kept opening with the date changed to 2008, and I keep having to re - enter my Web key. In addition, it was running much slower. Since I 'cleaned' everything out, I thought all would work perfect. This morning, the date changed to 2008; again AND it again asks for my Web key. Does this mean my Mac has reached it's almost end or could I have a 'bug' on it?
Again, thanks so much for your suggestions.

IMac won't recognize midi device

IMac won't recognize midi device (Roland Fantom) which is connected via USB only; no midi interface. I have rebooted both the Roland and the iMac, still no go. I have manually added the midi device under Audio Midi setup, still none of my apps will recognize the device; Logic Pro, ProTools and Sibelius. How do I get this configured? I've read through some other posts and nothing has worked.

Its standard for all computers - if you have 3rd party things that do not work - contact that company - they may have a driver for you to download specific for mac.
Some 3rd party things are windows only - probably same for Mac.

I'm trying to burn photos onto a CD from Finder, but my iMac won't recognize either a CD-R or a DVD-R.

I'm trying to burn photos onto a CD from Finder, but my iMac won't recognize either a CD-R or a DVD-R. Any clues? Nothing shows up in Finder as far as a Device, and I have a message telling me to "Insert a blank disc to begin" and that I will need a disc with at least "47.6 MB"--it's only 18 photos, and I need to burn them for a parent of a student (I'm a teacher). I have tried several different discs, so it's not the actual CD or DVD.

Create a new folder. Place the photos in that.
From the Finder File menu choose New Burn Folder. That will appear on your desktop. Place the folder of photos you created into that.
Now open Disk Utility and you will see that Burn Folder listed. Choose Burn from the menu.

My mac won't recognize my sd card

my mac won't recognize my sd card. recently had the hard drive replaced as per the replacement program.

Check your Finder Preferences, Sidebar, to make sure the "Hard disks" is selected.

IMac won't recognize DVD/CD drive anymore

As the title suggests, my iMac won't recognize my dvd drive anymore.
I don't know what the reason is for it.
I've never had this problem before, it happened a couple weeks ago.
I first noticed this when I tried burning a CD in iTunes.
It said at the top of the screen "Disc burner or software not found..."
I then went to System Profiler and checked "Disc Burning" and it
read, "No burning device was found. If you are using an external device please make sure that it is connected and powered properly." I'm not using an external device. I'm using the DVD drive that originally came with my iMac.
If anyone could please help me out with this I'd be very grateful.

Lately, I left my iMac on while I was sleeping. Couple nights ago, the optical drive made a funny noise and woke me up. It sounds very similar to opening up Disk Utility on my MacBook Pro, it looked for the internal optical drive. First, I didn't do further investigation on my iMac.
Yesterday, I happened to do some 'housecleaning' and attempted to slide in a data CD. The drive didn't response, so the CD was stuck. In the past, I had opened up numerous iMacs and they were getting more complicated model by model. I am certified to perform the repair, but since this iMac is covered under AppleCare, I decided to make an appointment with the MacGenius.
I did perform a PRAM reset earlier.
Do you have 'put the hard disk(s) to sleep when possible' checked under Energy Saver?
Out of all the Macs with slot-load optical drives built-in I have owned, this is the first malfunctioning I have ever had.

Intel iMac won't recognize external display with Dynex mini-DVI adapter

I've got an original Intel iMac with a Mini-DVI connection on the back. I'm attempting to hook it up to an external display (a plasma screen, in fact). I picked up a Dynex Mini DVI to Video Adapter DX-AP100 for Apple. This connector has a mini-DVI connector on one end, and both a video-out and an S-video-out on the other.
When attempting to use the adapter, the iMac does not recognize that there is an external display connected. Here are the facts:
The external display: I've tried this with a Panasonic Plasma screen connected directly through S-video, as well as a Pioneer receiver (one that switches video) connected both through s-video and composite video. And yes, I've got the settings on the TV correct. I've also tried this with a Polaroid LCD TV connected via S-video and composite video.
I did notice that when I click "Detect Displays" while the Plasma was connected, the plasma briefly "flashed", implying SOMETHING was happening, but still no dice.
Anyone have any experience with this Dynex DX-AP100 that could share some wisdom?
OS: v10.5.6
System Profiler:
ATI Radeon X1600:
Chipset Model: ATY,RadeonX1600
Type: Display
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x71c5
Revision ID: 0x0000
EFI Driver Version: 01.00.068
Displays:
iMac:
Resolution: 1440 x 900
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Built-In: Yes
Display Connector:
Status: No display connected

Yeah, I realize S-video is limiting, but I'm trying to keep things as simple as possible. The TV is mounted to the wall and there are not currently any DVI or HDMI cables coming out of it. There's an S-video input from my receiver that I'd prefer to use since it's readily accessible already. In the end my goal is to use Netflix "Watch Now" on the TV, so I'm not too worried about video quality.
and before someone asks if I considered that the receiver's S-video input might be the problem...I tried taking the s-video wire from the stereo and plugging it directly into the adapter. No dice.
ONE ADDITIONAL PIECE of information...while trying to get this to work on an LCD monitor, I plugged the composite video connection from the TV into the adapter. Suddenly the Mac recognized an additional monitor, but it saw it as a VGA monitor, not as s-video or composite video, and no signal went to the TV.
I'm considering trading in this adapter for a mini-DVI to VGA adapter, but that really won't help me with the connection to the TV.

Computer won't recognize Airport Extreme Card

Okay, I need a little help. I bought an Airport Extreme card for my eMac today, which is what my manual told me I'd need to connect to a wireless Internet connection.
I followed the instructions to install it exactly, but the computer won't recognize that it's there. It still says "no information available" when I go look at the Airport card settings.
I'm not sure if it's a fault of mine, the card's, or the computer's. When I insert the card, should it snap into place? Should it slide out easily? How can I tell if it's in properly?
If anybody can help out, it'd make my year. I am dying to get this high-speed Internet set up. Thanks.

surfingbaku, Welcome to the discussion area!
Use the information in KB 86325, eMac: How to locate the serial number and identify your model to identify which type of eMac you have.
If you have one of these eMacs
eMac (ATI Graphics)
eMac (USB 2.0)
eMac (2005)
you require the AirPort Extreme card.
Any other eMac requires the original AirPort card.
If you are using the correct card and it is not being recognized, one or more of the following must be correct.
The card isn't installed correctly.
The card is defective.
The eMac's motherboard is defective and not recognizing the card.

IMAC won't boot with USB card reader attached

My quite new 24" iMAC won't boot if I have a USB card reader attached:
I get to the white screen with the apple logo, but it gets stuck there and the little spinning gear below the apple logo never appears (I've waited several minutes). (In all my test cases, there is no card in the card reader.)
I've tried two different card readers with the same results ("iDOTconnect" brand and a brand new Apacer unit, both are USB2.0 multi-format card readers).
The 1st one I tried via a USB hub, the second one I tried via a new hub and also directly connected to the mac (both of those hubs work fine).
Anyone have any ideas?
Regards,
Strathglass
Message was edited by: strathglass

Hello strathglass
The same thing can also happen with other connected devices such as external HD's and iPods, the Startup Manager is lost and searching for a boot volume.
1. You may be able to fix it by going to: *System Preference / Startup Disk* and select the *Mac OS X 10.5.5 on Macintosh HD* then *Click the lock to prevent further changes.*
2. Leave those devices that cause boot issues disconnected until the iMac is up and running!
3. Only sleep the iMac, and be sure to disconnect those devices be for shutting down or updates that require a restart!
As a habit, I have always ejected and disconnected all mounted USB devices (flash driver, iPods, cameras, card reader, etc.) from my hub be for sleeping, restarting or shutting down...
Dennis

Stuck at login screen after Yosemite Upgrade - 2013 27" imac won't recognize keyboard or mouse

I installed yosemite without issues on my 2013 macbook pro retina so decided to try it on my 2013 27" imac. Install went fine until I get to login screen. Wireless keyboard and mouse won't pair so I can't type in password. Connected generic wired keyboard and mouse and still won't recognize it.
However, when I restart it I can hold down option on keyboard and it will bring up list of hard drives to boot from (I also have windows installed with bootcamp) so I know imac pairs the key

So the iMac was purchased by my father in 2011 shortly before he died. I thought, why not check if he also purchased Applecare at the same time? Turns out he did! So after calling and trying to reset the SMC, etc. with it not working the Apple tech told me to turn it over to an authorized repair shop here in Louisiana. Hopefully they can fix it.

Brand new 20" iMac won't recognize Ethernet cable - can't get online

I just got my iMac and cannot get the ethernet cable to recgonize. I know it works b/c I'm using it this very moment to type this on my Powerbook. When I plug it into the PB, I get the yellow,then the green once it connects. However, when I plug it into the iMac, I get nothing. I thought maybe I needed to configure Built-In Ethernet, but it won't let me select configure or connect. The assistant won't recognize it either. I posted in the Tiger forum mistakenly, but thought this forum would be more appropriate. This is what I posted (for more detail):
I just unboxed my new iMac and can't get on the internet (I'm on my powerbook). The problem is this; in Network, it says "The cable for Built-In Ethernet is not plugged in." Only, it is. Can't be the cable b/c that's the cable I'm connected with right now. So, I go through "assist me" and when I click on "Assistant" it takes me to the Intro page where I'm supposed to give a Location Name. I do this, calling it "home." The ver next screen, after clicking "continue" takes me to "How do you connect to the internet?" The problem here is that, of the 5 options, only one is selectable. Airport is the only one that can be selected?? "I use a telephone modem to dial my ISP" as well as "DSL Modem/Cable/Lan" are all greyed out..they cannot be selected. I use an ethernet cable. Why is this not able to be selected? It's very frustrating. I've turned off Airport and Bluetooth, yet I still cannot check any of these. I need to check "I use a cable modem to dial my ISP" but I can't b/c it won't allow me. Can anyone help me here? I can't use my brand new iMac and it's kind of a bummer. I thought these things were plug and play? Thank

Well I tried that and nothing. I'm completely stumped. I have no idea why this is happening. And it's weird b/c, everytime I'm jumping back on here, I'm just unhooking the ethernet cable from the iMac and plugging it into my PB. And, nearly immediately, i'm up and running, connected with the PB. How can it work on the PB and not on the iMac? And why would those options be grayed out on the iMac? It's like it just refuses to let me check them and/or configure. That is very weird.

Photoshop CC 64 bit sometimes won't recognize Nvidia graphics card

Sometimes when I open Photoshop CC 64 bit on windows 8.1 I get these warnings. I then have to restart my laptop for Photoshop to recognize my graphics card. Sometimes when I launch photoshop it is fine and there is no issue at all. It seems like every other time I launch Photoshop I get these warnings. I noticed that when installing programs from Adobe CC there are 2 versions installed. I tried opening the version that is not 64 bit and I did not get these warnings.

I noticed from another thread, that nVidia released a new Windows driver earlier this month. About the 3rd of March if memory serves. I don't know what card you are using, but I think some of those drivers cover a range of cards for the OS the driver is intended for.

Late 2006 iMac won't recognize external monitor

My late 2006 iMac doesn't recognize an external VGA monitor connected via the mini-dvi port with adapter and cabling.
Doesn't show up in Displays System Preferences - at times the mouse does show up but not the full display.
Any suggestions - Am I missing something?
Thanks
Bob

Download the software or driver from the manufacturer's site.

My Imac won't recognize my SD card?

Similar Messages

Maybe you are looking for