My iMac won't wake-up from a black screen...

At random times, more and more often, now, I return to my iMac (Lion) to find it with a black screen. It will not respond to clicks of a mouse, keys on the keyboard, or pressing the power button. I do not have 'hibernate' feature enabled. I leave it at night and the display dims and blanks out after ten minutes. I hit 'esc' in the morning and it pops right up for me, and is fully functional. But when I leave my computer for ten or fifteen minutes during the day, I return to that mysterious non-responsive black screen.
I don't know what to do to eliminate this problem. Is it software? Is it hardware? Is it the operating system? Do I need an appt with the Genius Bar? My computer is only nine months-old.
Help!

When posting in Apple Communties/Forums/Message Boards.......It would help us to know which iMac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***

Similar Messages

  • My imac won't wake up from sleep

    My iMac is about 6 months old and if it goes to sleep it won't wake up.
    The screen is dark, I press on the space bar, click the mouse but nothing happens. (at least on the old iMacs there was a light to see whether it was on or not).
    Then I have to hold the start button in for 15 seconds, let go, and then hold it in briefly and it restarts.
    I'm running Lion. I have the screen saver set to 5 minutes and the energy saver 1) computer sleep and 2) display sleep both for 10 minutes

    I'm having this same issue. Try this advice
    http://www.maclife.com/article/howtos/how_fix_mac_won%E2%80%99t_wake

  • IMac won't wake up from sleep

    When my iMac goes to sleep, pressing any key on the keyboard, or moving the mouse will not wake it up. I've tried resetting the SMC (System Management Controller), as suggested in one the Tech Support articles but to no avail. I have to shut it down by holding the Power Button, the turn it back on again, every time it goes to sleep. Any suggestions?
    iMac 20'' Intel '06   Mac OS X (10.4.10)  

    Ok, while you check the software check the firmware version you have, this doc will help
    http://docs.info.apple.com/article.html?artnum=303880
    If the firmware is updated, perform a permissions verify this doc will explain how http://docs.info.apple.com/article.html?artnum=152369
    Then if you notice no change you can reset the Pram by holding down the command option P and R keys while doing a re start the mac will fire up and you will hear a chime ,keep the keys pressed down until you have heard 3 chimes then release, the mac will then boot up ( be aware that this will reset your preferences to the default ones)
    Let me know how you get on
    kindest,becca

  • My iMac won't wake up from sleep, and often refuses to boot

    Hey guys,
    I recently became the proud owner of a 27" iMac.  However, when I first received it, it refused to start.  I had to plug it in, unplug it, plug it back in, hold the power button, unplug it, etc. for about 10 minutes before it finally started up the first time.  Since then, it has four times now gone into sleep mode and not come out, refusing to reboot until I perform the above dance.  I tested the power cable and power strip; both work fine.  Has anyone else encountered this behavior?

    I have two iMacs that are doing this though I only need to unplug the power cable for 30 seconds, plug it back in and then press the power button for a couple seconds. One iMac is late 2009 and the other late 2013 purchased in 2014. I can't pin down the precise date that it started but it was sometime in the last 4-5 weeks.
    The solution is to set computer sleep to never.

  • My iMac won't wake up after sleep or screen saver.

    For the last couple of days my late 2011 iMac (21 inch) has had this issue. If I press the power button, a dark screen will appear with the white cursor (*** apple?) and after a few seconds go back to sleep mode. The fans are running and the only way to turn it back on again is to force it by pressing the power button for 10 seconds or unplugging it.
    I have tried reseting the SMC and PRAM, tried to repair the disk, deleted the Cashes and Cookies folders as shown on this post. I have updated the software from Mac OS X (10.7.2) to Mac OS X (10.7.5), showing no satisfying results.
    My computer has never had an issue as serious as this one, as I can no longer just leave it there in standby without having to worry about an unsaved file or anything of the sort. What can I do?! Please help!

    Please detail ALL you have done so far in the way of troubleshooting?   Need this info to avoid the been there done that scenarios.
    Have you read for possible solutions over in the "More Like This" thread over here?----------------------->
    Care to share which OS you are using?

  • My iMac won't wake up when it's been asleep for awhile

    Each morning now, (since the last update of ML) my iMac won't wake up from sleep when I try from either
    my bluetooth keyboard or mouse. Seems like it would be a bluetooth connection issue but how do
    I make sure it will not interfer with waking up my computer.
    I tried pushing the on/off button briefly to get it to wake up but no luck there. I always have to restart
    it.

    This sounds like the intermitent problem that has been around for a few users since some point during 10.6 Snow Leopard. I had the problem off and on and found the only 'fix' that worked 100% was to set: System Preferences>Energy Saver and set 'computer sleep' to 'never'.

  • I have recently upgraded and am finding my iMac won't wake from a sleep state 80% of the time. What do I need to change or do to prevent this?

    have recently upgraded and am finding my iMac won't wake from a sleep state 80% of the time. What do I need to change or do to prevent this?

    Hi 02SilverSport,
    Try using the power button to wake the iMac.
    OS X Mavericks: Using the power button
    http://support.apple.com/kb/HT5869
    If you are using a wireless keyboard or mouse, check out this article:
    OS X Mavericks: Wake your computer with a wireless mouse or keyboard
    http://support.apple.com/kb/PH13997
    And for more generic troubleshooting, try this one:
    OS X: When your Mac doesn't sleep or wake
    http://support.apple.com/kb/TS5357
    where there's a section for "Your computer cannot wake from sleep" and "Your computer is slow to wake from sleep".
    Best Regards,
    Nubz

  • Won't wake up from sleep mode

    I have only had my iMac for a couple weeks and four times now it won't wake up from sleep mode. I have to use the on/off button for a response.

    Since you have a new machine, I would call Apple immediately and have them deal with the problem.

  • My iMac will not wake up from sleep after upgrading to OS X Mavericks

    After upgrading to OS X, my iMac will not wake up from sleep.  Each time I have to do a hard restart.  Is there a fix for this problem?

    Hi,
    I have just had the same problem with my iMac and after upgrading to Mavericks my iMac would not wake without pressing the power off button and re-booting.
    Anyway, I have since done a complete new install on my iMac and have gone 5 days without an issue with the iMac not waking.  It was a bit of a pain to do but my own view so far is that the problem is linked to the upgrading of the OS instead of a clean install.
    My iMac now flies with a new OS installed instead of an upgrade.

  • X1C won't wake up from sleep mode using keyboard

    Hi...so finally got my X1C today. One thing I am noticing is that the machine won't wake up from sleep mode when I press any key on the keyboard -- it only wake up by pressing the power key. This is a bit unexpected to me. Is it by design, and is there any way to change this?
    Thanks for your help.
    Solved!
    Go to Solution.

    Does it awaken from stand-by if you press the Fn key? That's been the ThinkPad standard for as long as I can remember.
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • MacBook screen goes gray and won't wake up from sleep - 10.6.2

    We have a MacBook Alum running 10.6.2 with 4gb ram.
    We recently upgraded to 10.6.2 from Leopard and this issue started to happen.
    It seems that as the MacBook goes to sleep or goes to the screensaver mode, the screen goes gray and won't wake up from sleep or screensaver mode without a hard reboot.
    Is Apple aware of this issue? It did not happen with the previous version of Leopard. This issue arrived when we upgraded to Snow Leopard. Other than the sleep issue, SL is rock solid. Kudos to Apple for producing a great OS!

    Hi GrooveDaddy,
    Have you contacted AppleCare via telephone to make them aware of this issue? It definitely doesn't sound like normal behavior. What sort of troubleshooting have you done so far on the issue? What sort of settings do you have on your screen saver? Password protected? Custom iPhoto slideshow?
    What if you manually sleep the machine by closing the lid or engaging it via software (via the Apple menu) does the screen have the issue in both scenarios?

  • Imac won't play songs from my iPhone after I have authorised the computer

    Imac won't play songs from my iPhone after I have authorised it

    My solution was restoring my iPhone. Techs at Apple couldn't figure out why so I had to do a restore and worked after that. I know it's a pain and you have to reinstall all you stuff, but it worked for me. Hope this helps.

  • G3 Bronze Keyboard won't wake up from sleep

    I have a hand-me-down Powerbook G3 Lombard 400 Mhz (bronze keyboard), with a dead main battery. It works great with the power adapter, and has just enough charge for me to move it from one outlet to another without shutting down. I'm trying to set it up for use as an Itunes server connected to my home stereo, which is fine because it will always be plugged in.
    The problem is that the laptop won't wake up from sleep. This morning I noticed that the display and HD seemed to be sleeping, but the fan/processor buzzing noise was still going (there were no lights other than the little green light on my PCI card). I couldn't figure out any combination of keyboard or power key strokes that would either wake it up or shut it down. I unplugged it, waited half an hour or so, and it finally shut down. I then plugged in, hit power, and it started and booted perfectly (after the expected disk check for abnormal shutdown). Then this afternoon, the whole thing was sleeping (I think -- no sound, no lights other than PCI card light), and again it wouldn't wake up. Again, I unplugged, let it power down (waited for the PCI light do die), the replugged and it started up just fine.
    Any idea what gives? Or what I do when it's sleeping? Right now, I have changed the power saving settings so that it never goes to sleep, but I'd really like to let it sleep when people forgot to turn it off...
    thanks!

    aldpol,
    There are many causes for sleep issues and you just have to wade through them one at a time.
    You can always force a Lombard or newer powerbook to shut down by pressing/holding the power button until it turns off. As you have noted, this is an undesirable process since you can corrupt the HD.
    I would start the troubleshooting in this manner:
    1. Unplug all peripherals (PC cards, mouse, everything).
    2. Reset the power manager:
    http://support.apple.com/kb/HT1431?viewlocale=en_US
    3. Now put the powerbook to sleep via the Special menu, wait a minute or so, then wake.
    4. If no success, restart while pressing the shift key until you see the message 'extensions off', then release. Now test sleep/wake.
    If number #3 is successful, one of you peripherals is probably the troublemaker. If still having issues, please post back with more details if possible.

  • My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well.  Any suggestions?  Running Lion 10.7.4 and sending all reports in.

    My mac won't wake up from a sleep and I have to unplug it to reboot as the power button doesn't function as well.  Any suggestions?  Running Lion 10.7.4 and sending all reports in to Apple.

    First things first:
    Update your profile (equipent, OSX, etc)
    In Lion MS office2004 is not compatible, are you stIll using it?
    Do the SMC RESET and do the PRAM reset.

  • M70-160: won't wake up from hibernate or standby - software or hardware?

    I just got maaaaaan!!
    works fine, but won't wake up from hibernate or standbye !! unless yur gonna wait for awhile!! 15min or something like that!!
    After that it will wake and work normally !
    I thought it's overheating problem but now just power it on and when the toshiba logo appear if you turn it off, it won't power on again, but after 15min it WILL !!!
    so it's not a heating problem !!
    It does that even without HD on it !!
    at first it was hibernate and standby problem, now it dose the same with shutdown !!
    what can I do!!
    i just bought it guys !! ASP is to far a way !!
    is there anyway i can do to fix it !!
    i do fix PCs alot but not notebooks !!

    thank you for your help and the fast replay, i really really appreciate it.
    I'll explain the problem in details, right after hibernate or standby IF you press power button the led goes blue, fan starts, HD led lights, battery led, power adapter led (if its connected), and cd player make sound as if it looking for a CD, and THEN fan stopped, HD led goes off, no sound of CD, leaves u only with power button led ON, a nice frustrating Blue
    after waiting, u eventually gave up, turn it off by along press on power button, and then no matter wut u do, simply won't start only same sounds and leds as mentioned previously, nothing on the screen as if its dead !! no logo no nothing.
    give it a time ( about 15min with battery connected, or 5min or less with battery out) Press the power Button, THERE U GO, works perfectly !!
    same case with shutdown but not always as hibernate and standby (though once it did wakeup from standby!!), but most of the time after shutdown u have to wait 15min!!
    no USB flash memory connected or anything else !
    i did install winXP pro SP2 on it and installed the drivers and Microsoft HOT fixes also, but problem remains.
    i also did recovery from the recovery CD that comes with it, also no good !!
    i noticed that if u disconnected the battery the unit needs shorter time to be able to wake up or boot. about 5 min.
    wut kills me is that the unit works perfectly and i like it !!! i only got this issue with it !!
    so wut i need to know is this: Is there anyway to make sure weather if its a software problem or a hardware problem?
    its not easy to go to the local service cuz its in another city!! i need to try first wutever it takes to fix it on my own!
    thank you for your time!

Maybe you are looking for

  • Ipod flashing on and off

    Alright, I had to do a full restore on my computer and lost everything. Plugged the Ipod in afterwards, and lost all my songs/movies. Well now it told me that I had to download the update in order to put new songs on. I did. Now the ipod is flashing

  • Custom Report times out

    Greetings, We are experiencing a very peculiar problem with a custom report where it times out after the stipulated 30 minutes (rdisp/max_wprun_time = 30 minutes). What is unusual is that, the same report, with the same selection criteria, finishes w

  • Trying to use Crystal Reports XI Release 2  to display a report

    I am creating an application in Visual Basic using Microsoft Visual Studio 2005.  I have downloaded the trial version of Crystal Reports XI and I have built my report and have attached to the Crystal Viewer that is on my form in my application.  I us

  • Recommend Flash CS3/Actionscript 3 Books?

    I am looking to buy two books: one on Flash CS3 and one on ActionScript 3.0 (probably one by Colin Moock). Any recommendations?

  • Datasource: ORA-02019: connection description for remote database not found

    Hi, I recently made the datasource to point to a new host, and using the EM console tested the connectivity to the datasource to be successful. Java code that refers to the DS is also the same as before that was working as only the connection string