My iMac yosemite does not let thunderbird update
I don't think i had this problem before yosemite
''Matt [[#answer-713443|said]]''
<blockquote>
does your firewall block programs or ports?
</blockquote>
Similar Messages
-
My iMac Yosemite does not recognise my new WD Elements external hard disk
Does Yosemite include drivers for the WD Elements external hard drive?
Several questions:
Can it be seen in Disk Utility (applications - utilities - disk utility)?
Has it been formatted to Mac OS Extended (Journaled)?
Where are you looking to see if it can be seen by OS X?
Please answer all three questions. -
IPhoto does not start to update after my iMac was updated to OS X Yosemite.
iPhoto has been "paused" after my iMac was updated to OS X Yosemite. iPhoto does not start to update when I click "UPDATE" in App Store "Updates". The circle on the left top corner just keep circling. Do you know how to fix this problem? I cannot download my photos to iPhoto without updating it.
Thank you LarryHN,
I could not follow what you have explained to me as I struggled to find iPhoto 9.6. Anyway, while I was struggling, I managed to update iPhoto somehow. Finally, I can use iPhoto!
Thank you very much for your quick response.
Tama Chan -
I believe it is running an older version of maverick it is 10.6.8 but it will not let me update any further . I added 3gb of ram to upgrade from the original 2gb it came with but still no updates are being allowed Does anyone have any idea why this is ? I am sure the criteria for the upgrade is available so I don't know why I can not up date it?
10.6.8 is Snow Leopard.
Run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
iCloud system requirements:
http://support.apple.com/kb/ht4759
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion -
After upgrading to Yosemite, Preview does not let me edit jpg photos (cut out something in background and paste a patch to get rid of the flaw.) Help.
thankyou. THANK you.
thankyouthankyouthankyou!
sorry about no screenie but the first option worked (at least so far!)
THANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOUTHANKYOU -
I am new with iMac and I am trying to copy some file from my external HDD that a used with my PC but it does not let me also I can't delete anything from this HDD using the finder. Can somebody help me , please?
No, unfortunately, when you format a drive, it will erase all the contents. So you will need to find a temporary "storage" place to put the stuff using a PC so you have access to it. Then reformat using Disk Utility (Applications > Utilities). If only using with mac, format Mac OS Extended (Journaled) and use GUID Partition scheme under Partitions/Options. After formatting, you can drag the files back.
-
My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.
here is fix! i tried only step 1 and then restarted my computer and now it works. Choose remove All Files
Hope it helps.
https://discussions.apple.com/thread/5952624?tstart=0 -
Macbook Air does not want to update to Yosemite 10.10.3
My Macbook Air is running on Yosemite 10.10.2 and I want to update it to the current version of 10.10.3. However, I cannot do that as it is not letting me update anything. When I click on the update tab in the app store, in the left hand corner, it keeps "Checking for updates" and will not allow me to update anything. I can click on the tab to update but nothing will happen. I also need to update my iTunes and it is not allowing me to do so. This is HIGHLY annoying and I have high speed internet so I know it isn't that. Is anyone else having this problem? Please help!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then take the action that isn't working the way you expect. Select any lines that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
My iMac will not let me in to my iPhoto it asks me for my password but then still does not let me in
Hi,
My imac will not give me access to iphoto. It asks me for my password but then when I input that it still does not let me in. Any suggestions. I have limited computer knowledgeBack up all data.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please
Hey there mbarikiwa,
If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
OS X Yosemite: If a USB device isn’t working
If the device is connected to a USB hub:
Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on.
If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord:
Try plugging the device directly into your computer’s USB port or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding.
If you have many devices connected to your Mac:
Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps.
Verify that the device appears in System Information:
Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information.
In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps.
Restart apps:
Quit and restart any apps that use the device.
Restart your Mac:
Choose Apple menu > Restart.
Check your device’s USB connection
Thank you for using Apple Support Communities.
All the very best,
Sterling -
My Hot Spot does not work after update to 6.0.1. Any suggestions?
Ok, I had the same issue, my phone is unlocked(iphone 5 with 6.1.3). So I went to the apple store and had it replaced. it worked good for a day and started doing the same thing. When the apple tech replaced my phone, he transfered my screen protector to the new one.
so I thought it was my sim card, I put in my sisters sim card from a different carrier and it did the same, so then I was like let me take off the screen protector, and that was it.
so guys, if you have a screen protector on your phone and it's doing "low signal", "No Service", "Searching", "Full bars cycle" then take off the screen protector. so far my phone is working normal. -
I have an issue with my computer. the volume was working fine on wednesday june 29th 2011 (thats the last I could remember) and today is july 3rd 2011. so when I start the computer up it does not let me play anything trough the iTunes volume when I start a song it goes immediately to pause but no sound comes out. When I click on the volume in the menu bar it does not allow me to raise the volume up, nor does it allow me to play volume through my speakers when I am on youtube.com. AND when I go to system preferences it has checked off that it is on mute, BUT it is a light gray color and it does not let me check the setting off. please help! what do I do? I think it is still under warranty because it is only between 11 months-12 months old.
*******************************************************ANY ADVICE WOULD BE APPRECIATED THANKK YOU!*************************************************************That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific) -
My Apple TV does not let me see vídeos when transmiting from my iPad And iPhone, however let me listen music And see the pictures when transmiting from theese devices.
Ok thank you so much, for your timely response.
RESPONSES:
1) When I set up my iMac, I did not transfer any data directly from my windows PC. I simply used the same iTunes login and account. I have access to all of the files via the "Purchased" section of the iTunes store. If I click "Download Previous Purchases" text, I can download ALL of the purchases I have ever made.
2) I have the Apple TV 2, so good news, question answered. I thought maybe it was the Apple TV 1, but it is the Black model, so bam. Good response for you. Well the whole damned reply is an awesome response, just pointing out that one piece of awesome. I stated that it was an Apple TV 2, and yet you were still good enough to figure I could be mistaken, and provide me with knowleedge just incase.
QUESTIONS:
3) So can my iMac not stream the data directly from itunes, without download? Apple TV can, but perhaps that is something among many things that maker it unique, and awesome.
SERIOUSLY.... THANK YOU...
I work in the computer support section for the Military. The only problem is we use Windows , lol. Well that and i've been gone for nearly 6 months on recover. I go back next month though I hope. But working in that field gives me the abilty to judge responses that run inside the same vein. Your response was so awesome that I half thought I might have written it myself. -
Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
ThanksThis really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly -
HT1414 iOS 7 does not let me resize my wallpaper pics to normal size to make a smaller wallpaper.
iOS 7 is a good idea. But for apple consumers that are familiar with computers this is a sad upgrade. This was forcefully released with many issues. First insure is my air play. I can only airplay sounds and my IPAD 2 plays the picture. Second issue is that the iOS system lags. Third when accessing photos to make a photo a wallpaper, it does let you move but it does not let the photo be resized like the iOS 6. Another issue is that the apple store keeps showing me updates, but there are not any updates to update. The auto brightness does not respond even when placing my hand over the sensor. This is a disgrace for apple users. How are these issues going to be resolved? Do we have to go back to IOS6? I have rebooted many time is the fix for this issue? Remind me of windows vista, *****. Please fix.
Ok, I just found the solution Thank God
You see how with the new update the icons move as you tilt the phone to give you that "fancy" 3D look, well because of this the wallpaper gets distorted.
I turned this option off, and the wallpaper resizing issue went away
Here is how to turn that dumb 3D option off (which also drains your battery):
Navigate to the iOS 7 Settings -> General -> Accessibility -> Reduce Motion -> ON
Yep, that's all.
Enjoy
Maybe you are looking for
-
When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes
When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes
-
Drag and drop feature is not working in Maverick?
what can i do when the Drag and Drop feature is not working in my I Mac Using Maverick 10.9.4, it will not do it at all i must do copy and paste. reading from earlier forums this has been a problem in earlier versions for the mac.
-
Where to find 4-pole 3.50 mm (1/8-inch) minijack for 2ZS digital
I am having a lot of trouble locating a Digital Out via 4-pole 3.50 mm (/8-inch) minijack to coax connector for the Audilgy 2ZS to enable digital output to my home theater system. Does anyone have any idea where these are found, or an alternati've so
-
can i change my google searches back to being in alphabetical order rather than in most searched for?
-
Treating intranet client connecting differently from internet client
Hi All, I am developing a server socket application that accept connection from client. The clients can connect either through internet or intranet. I need to treat them differently. Is there a way to know whether the client is an intranet client or