My image blacks out when usi

I am unable o use the healing brush, patch tool, etc.  The image keeps blacking out.  This repeats.  It's as if it is "unstable."  The image does not stay on  screen.  I experienced the same problem while using the crop tool, but was able to crop in Raw.  I am an experienced user with PS 5; this is my first week with CC.  Is anyone able to help me?  Thanks.

Hello Mr. Cox,
Thanks for your suggestion.  I wopuld like to follow it, and give it a
try.  But, I am not very computer skilled to do what you recommend
without further help.  Would you be willing to tell me how I set the
Photoshop GPU mode to "basic" since I do not know how.  FYI: my computer
is brand new laptop from Lenovo.
Many thanks,
Herbert

Similar Messages

  • Screen doesnt get blacked out when on call after the new update

    Since the time i Have updated the firmware screen doesnt gets blacked out, when on call after the new update. Because of this option automatically get selected by getting touched cheecks.
    any solution?

    Please try to update your plugins [http://www.mozilla.org/en-US/plugincheck/] Flash is out of date.
    Also the Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • G580- Screen blacks out when power supply is not plugged in to the laptop

    My laptop is just 3 months old and I am already having problems with it.
    The laptop screen blacks out when i remove the power supply from it.
    When plugged in , it starts workin again.
    Whats the point of a laptop if i am not able to use it without plugging in??
    I don kno what the probelm is. Can anyone help here pls...
    Cheers
    Vaish

    Hi Vaish,
    I’d like to help you with this issue as we can try to increase the Brightness of the screen from the power options while plugged in,
    And then please if still the same we can try to uninstall the Lenovo Energy management and reinstall it back:
    Lenovo Energy Management for Microsoft Windows 8
    Lenovo Energy Management for Microsoft Windows 7
    Hope the information helps. Let us know.
    Regards
    Soha
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Photoshop 5: blacking out when I use certain tools

    I have Photoshop 5. Everything is up to date.
    Most of the time when I use the crop tool or patch tool, it will black out when I am circling what I want to change or crop. I can't see what I'm cropping, I just have guess, and the same thing with my crop tool. It's been happening for a very long time. Almost since I first purchased it.

    Do you really mean the ancient, obsolete Photoshop 5?  Or did you mean Photoshop CS5 a.k.a. Photoshop 12.x?
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • My ipod touch 'blacks out ' when loading apps. I have tried resetting it and re-downloading the apps but with no success.

    My ipod touch 'blacks out ' when loading apps and then goes straight back out to the screen. I have tried resetting it and also re-downloading the apps but with no success. All software is up to date.

    Did you try download/installing a new app?
    Then try:
    iOS: Troubleshooting applications purchased from the App Store

  • Canvas blacking out when working with layers or shapes

    Whenever I create a shape on my canvas, or I use a shape as a clipping mask, the entire canvas blacks out and I can't see anything until I click off to the side, in the workspace, so none of my layers are selected. This has happened when I have dropped items onto my canvas and am moving them around, as well.
    it will flicker back and forth between showing me the actual image and just being black.
    I have no idea what is causing this or how to fix it.

    Thank you!!! That was the issue. For those looking in the future who need the steps:
    In Photoshop,click on Edit>Preference >Performance
    On the right side you will see an option of graphics processor settings. Click on advance settings and if the drawing mode is advanced, change it to basic and click Ok.
    Then close and re-launch the program.

  • I have a problem with FF 4.0b8 and Adobe Flash player where portions of the YouTube page or FF window will black out when I move my curser over buttons or tabs, etc. Any suggestions?

    I'm running FF 4 Beta 8 with the latest Flash player (10.1.102.64). When I play YouTube videos, the video is loaded, starts, and plays okay, but when I move my cursor around within the Firefox window, portions of the window black out under where the cursor travels. FF tabs and buttons will black out, or parts of the YouTube page (but not the video). CTL-ALT-Del to bring up Windows Security Panel, then CANCEL will restore the Firefox window, plus the YouTube page correctly (ie black is gone and window has been redrawn correctly). I can open up new tabs and replicate the problem multiple times. I've also experienced this problem with embedded YouTube videos (though it's easiest to replicate the problem direct from the YouTube page.) I don't experience this problem at all with FF 4 Beta 8 in Safe Mode, nor the latest FF 3.x.x. I have tried uninstalling and re-installing the Flash plug-in. Anyone have any ideas?

    Problem involving videos played from the YouTube site is much less noticeable after upgrading from FF 4.0b8 to 4.0b9, but still occurs with embedded YouTube videos, where blacking out of other portions of the window still happens.

  • Z2 screen does not totally black out when not in use

    Hi, I noted after upgrading to lollipop os, that my screen does not totally off ( still some dim light is emitted from the screen) even when I have set the phone to time out the screen to after 5 mins is inactivity. Why is that so and what can I do to make it black out totally when screen is time out?
    Appreciate all your advices.

    Hi hesper
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    Since this has occurred after the update what I suggest is running a Software Repair on your handset as it is very likely to fix the problem. 
    Download the PC Companion software and install it on your PC.
    Once installed on your PC, double-click the PC Companion icon on your desktop to start the update.
    Please ensure your phone is powered off and not connected to the PC when you begin this process. You are not required to connect the phone until after step 10.
    1. Install and open PC Companion then select Support Zone.
    2. Phone Software Update.
    3. Start.
    4. Repair Phone
    5. Continue
    6. Accept data removal
    7. Next
    8. Wait for prepare
    9. Select Phone
    10. Follow the connection steps
    NOTE: The software repair will delete all user data
    To back up your phone using PC Companion:
    1. Go to Support  to install PC Companion on a Windows computer. 
    2. When installed, start PC Companion on the computer. 
    3. Connect your phone to the computer using a USB cable. 
    4. Click Start under Backup & Restore. 
    5. Follow the on-screen instructions.
    Hope this helps! Keep us updated
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Black out when screen is moved

    My screen blacks out at times when I move the screen tipping forward and back. There is only a few positions where it will stay on. It's a 2008 black macbook running 10.7.5 and 10.6.8  Everything else is fine. Hardware test shows no problems. Any idea what kind of a repair this would be.
    Thanks for any repley
    Paul

    The symptom is classic of a broken inverter cable. The cable routes through the left hinge to the screen and wears out from opening and closing the screen. It's a difficult repair but following the guide at iFixIt if you have the courage and patience you can do it yourself https://www.ifixit.com/Guide/MacBook+Core+2+Duo+Inverter+Cable+Replacement/4772

  • My picture blacks out when adding text or selecting an area.

    When I try to add text the picture blacks out.  I can't see anything and have to type blind.  When I am done, everything comes back and the words are there, but every time I click in the word box to change anything the picture will black out.
    I also have a problem when doing a large selection area - as I outline the item I want to select the picture will blink in and out.
    Thank you for any help you cna provide

    Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
    Please read these (in particular "Supply pertinent information for quicker answers"):
    Best practices: Usage | Adobe Community
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html

  • My iphone blacks out when i switch on Edge/ 3 g.any remedy?

    My I phone 3 GS has been upgraded to latest IOS6. Now when ever I switch on Edge/3 G services the phone blacks out. Why? Any remedy to this?

    Have you contacted your carrier to ensure cellular data is provisioned properly for your account and iPhone?

  • Monitor blacks out when booting with KVM Switch in the middle

    Hi
    I have attached my Xserve with an iMac G5 to a KVM Switch. When I boot up the Xserve the monitor blacks out after the apple logo.
    I know that the Xserve tries to autodetect the monitor. Apparently it fails in its job when the KVM is in the middle. Everything works well when I remove the KVM and connect the monitor directly to Xserve.
    Any ideas how do I disable the monitor autodetect feature - or something?
    Xserve (intel) Mac OS X (10.4.1) dkvm-4u KVM switch

    Hi all
    I did try that. No luck.. Strangely enough, I realized that when the server boots up, the login screen defaults to 85HZ refresh rate. I found a site that explains the plist file that you can change to force it to 60HZ. What is weird it if I boot the Mac connected to another LCD, then move the cable to the KVM, it works. It almost seems like when the mac is booting, it sends some sort of signal just before the login screen comes up, that screws up this KVM. Tried updating firmware, still in the process of speaking with the KVM support people...
    very strange..
    Enio

  • Second screen blacked out when full screen with dual displays

    I have a MacBook Pro connected to an LCD display. I use both screens. When working from home I'd like to have my local machine showing on the LCD monitor and my work machine showing in the MBP screen. I can do this, however I can't have the work machine in full screen mode because ARD blacks out my main LCD monitor. This frankly drives me nuts as there doesn't appear to be a preference within ARD to change this.
    iTunes does the same thing. If I want to watch a video full screen in one monitor it blacks out the other. C'mon Apple, Quicktime doesn't do this and has a preferences tab just for display settings!
    Does someone have a suggestion, work around, or want to point me to what I might be missing to solve this issue?

    I understand what you are doing, but when you are running as full-screen the second display is blacked out because your making your station only the target at that moment. You are telling ARD that you want nothing to do with your Admin station. Also because the target doesn't have a second screen, your is blank. This avoids any confusion as to what screen belongs to what machine. ARD is working as it was designed to.
    iTunes does the same thing to hid extra screens that are not part of the presentation so they don't detract from the show.
    With your Observe or Control in Windowed mode, make the window of you client to fill the display as much as possible. This is the best you can do. Besides, when you are Controlling a client in Full-Screen, you can't move files and such with drag-n-drop. So if you want to work on both at the same time, you need to stay in windowed mode.
    If you would like to make the petition to have your idea supported, do so here

  • Page elements blacked out when inspecting them

    When in the Firefox dev tools panel and inspecting the elements of an HTML webpage, the element my cursor hovers over gets blacked out.
    http://i.imgur.com/f6pDdUH.png
    It's annoying to have to open chrome each time I have to write a userstyle or something, especially when Firefox has much better developer tools otherwise. So I hope it isn't a "feature", but a bug on my side!
    Anyone knows how to fix this, preferably without having to reset firefox?

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

  • Newest Macbook pro blacks out when the battery is near full and plugged in. Anyone else have this issue?

    So for about 3 weeks, I have been forcing my macbook to close because whenever I wake it from sleeping to use it, I try to put in my password but it blacks out. I finally figured out that this only happens when its plugged in and near full battery life. Does anyone else have an issue similar to this?

    So for about 3 weeks, I have been forcing my macbook to close because whenever I wake it from sleeping to use it, I try to put in my password but it blacks out. I finally figured out that this only happens when its plugged in and near full battery life. Does anyone else have an issue similar to this?

Maybe you are looking for