My image is not being fed into my podcasts.

Everything about my image is okay. Why is it not being fed into my podcasts?

That depends on how you are making your feed; presumably you aren't hand-writing it (if you are you can simply remove the return). A program or service creating a feed shouldn't introduce the line return - all I can suggest is looking closely into the program and perhaps trying to contact their Support.

Similar Messages

Item in sales order not being picked into picking list

Hi Gurus,
Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
Many Thanks
Choudry

Hi
Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
Try by changing the schedule lines in sales order in VA02
there you try to change the delivery date to past
It might be possible if you had enough stocks at that time
Regards
Raja

Images are not being display in people search for few users - why ?

Hello,
In my farm, users having profile picture in UPSA and they are able to see in My Profile page as well.
However when I find user in People search - images are not being display for few users while for others it works.
I have checked picture property which is indexed and then I run full crawl still its same issue.
Following are the settings for Picture Property - would you please let me know why its still not being display in people search ?
Dipti Chhatrapati

Dipti,
Hope below urls will help you,
https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
Sudip
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5.

My jpg files from CR2 edits in CS6/CC are not being imported into LR5. Bridge and Explorer can see them ok. Tried to reimport but LR5 cant see them.
The file numbers are the same as original CR2 but have the jpg extension. TIFFS and PSDs seem ok. Can anybody help please?

how do I get all these files in my catalogue in the correct places cos they scattered around a bit
That's kind of a broad question ... and there are many different approaches ... so I will explain my approach, and other people can explain their approach.
My approach is to assign keywords and optionally captions and titles and other metadata to all of your photos, and use those to organize and search. Then, it doesn't matter what folders things are located in, if you want to see all your pictures of Chicago, you simply click on the arrow to the far right of the keyword Chicago. You don't have to remember what folders to look in, and this works even if the photos are scattered in a dozen different folders. In addition, since photos must be in one and only one folder, that limits your ability to organize; but you can assign as many keywords as you'd like to a photo, so a single photo can have keywords "Chicago" "Zoo" "Elephant" "Vacation" "Illinois" "United States" etc.

Dynamic image is not being displayed in Adobe Reader 8.1

Hi,
In interactive form, we have followed below required steps to show a dynamic image.
For the left image, drag and drop an Image Field element from the standard Library tab to the Body Pages pane. Select this image field and edit the following properties:
Click on the Layout tab and choose None for the Caption position.
Click on the Object, then the Binding tab and choose None for Default Binding.
Click on the Field tab, enter $record.SapOnlineShopUrl for the URL entry, and select Use Image Size for the Sizing field.
Click on the script editor and enter the following FormCalc script statement, which enables the dynamic integration of the image. Show: initialize Script: this.value.image.href = xfa.resolveNode(this.value.image.href).value;
Language: FormCalc Run At: Client
Image is displayed properly in Adobe reader 7.1 but it's not being displayed in Adobe reader 8.1.
I was going through some forums and understand that Adobe 8.1 blocks href URL. If this is indeed true, what's the alternative way to show a dynamic image?
Regards
Chandra
Edited by: Chandrashekhar Singh on Apr 24, 2008 7:28 AM

Soory, I thought its static image....
Regards,
Vaibhav Tiwari.
Edited by: Vaibhav Tiwari on Apr 24, 2008 11:45 AM

How do I turn off automatic renewal of subscriptions eg to New York Times. AND can I be sure that when I download an update I am not being hooked into an on going subscription. Thankyou

How do I turn off automatic renewal of subscriptions eg to New York Times.
AND can I be confident that when I download an apstore update I am not then being hooked into an on going subscription.Thankyou

Hi,
I am using German OS therefore maybe the items are called differently in English:
1) Go into the main menu
2) Select "Alerts"
3) select the Profile you like to adjust
4) Select App Alerts
5) Select Email
6) You sould see your 3 mail accounts listed
7) Select the one you like to "mute" and you can set everything (sound, LED, vibration etc. individually for this acount)
Hope it helps
Alex
Please feel free to hit "Like" if my post was helpful :-) Thank You!

Build thumbnail image does not take AnalogBalance into account

When I build a thumbnail, it does not take AnalogBalance into account.
dng_image_preview thumbnail;
dng_render render (host, *negative);
// Build stage 2 image.
negative->BuildStage2Image (host, ttShort);
// Build stage 3 image.
negative->BuildStage3Image (host, ttShort);
render.SetFinalSpace (negative->IsMonochrome () ? dng_space_GrayGamma22::Get () : dng_space_sRGB ::Get ());
render.SetFinalPixelType (ttByte);
render.SetMaximumSize (256);
thumbnail.fImage.Reset (render.Render ());
thumbnail.fImage.Get()->Rotate( dng_orientation::Mirror90CCW() );
thumbnail.fInfo.fColorSpace = thumbnail.fImage->Planes () == 1 ? previewColorSpace_GrayGamma22 : previewColorSpace_sRGB;

The AnalogBalance is going to affect the mapping between temp/tint values and camera neutral values. If the white balance values are already stored as camera neutral values, I would not expect it to significantly change thumbnail rendering.
It sounds like you do not understand AnalogBalance correctly.

After 1.1.1 update, image emails not being delivered

just upgraded to the latest patch (1.1.1). Sending images) as email are not being delivered. I am using Yahoo for email. Anyone else see this?

I've just switched SIM cards with someone else who is on P&G o2 and has an IPhone 5 running 6.1.2. My sim in their phone still won't send texts to the problem number yet their sim in my phone will? Think it might be a network issue?

Edited images are not being saved in LR5

When I edit images in PSE11 from LR5 and then hit SAVE...my edited images are not showing up in LR5:(

Dipti,
Hope below urls will help you,
https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
Sudip
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Keyword tags not being imported into Organizer when doing Save As

I've got quite a number of pictures in the Organizer, and find the keyword searching invaluable.
However... When I open a file containing keywords in the main editor, and save as, it offers the choice "Include in the Organizer" which is ticked by default. This brings the new version of the image into the organizer, but the keywords don't appear. They are still in the source .psd or .jpeg, going back into the editor and doing File | File info... shows that they are there.
I got round it by saving with "Include in the Organizer" unchecked, but it doesn't remember the setting of this - it always switches back on. This keeps the file out of the Organizer so at least you can use Ctrl+Shift+G to import which will take the keyword tags.
I guess there are two questions here:
1. Is it possible to get the Save As to put the keywords as well as the image into the Organizer?
2. Failing that, is there a way to turn off the "Include in the Organizer" check box?
I've searched the web, messages in this forum, and the FAQ by John R. Ellis and haven't been able to turn up any clues. Hope someone can help or advise :-)
Regards,
Duncan

Hi,
Thanks for the reply.
How are you opening the files into the Editor. Are you in the Organizer and you select a photo and the Ctrl-I (or menu command) to open the editor? Or do you open the file from the Editor directly, searching for it among your folders?
I'm opening the files from the Organizer using Ctrl+I.
What version of PSE?
I'm using PSE7 with the latest updates applied.
What file type are you trying to save the photo as? Please confirm that the originals are .jpg and not RAW.
I'm using .jpg and .psd, using Save As with the same filetype. e.g. open dsc1017.jpg save it as dsc1017_modified.jpg
Regards,
Duncan

How can I stop getting the error message of firefox not being permitted into a website?

Okay so yesterday while on my school site trying to do work and access my course, this error message popped up saying either my internet connection is not good, which it is working, or that the website is busy but it wasn't so it had to be with my firewall and firefox. So I went to firefox website to see if I can fix it, I did what they said to do and to remove firefox from the list of programs I'm allowing in and then to allow it back in. And it didn't work. So i updated firefox and it worked perfectly.
Until today, I tried to access my course and it popped up with the same message. So I tried to do what I did yesterday with removing it from the list and allowing it back in but it didn't work. And firefox is up to date so I honestly don't know what else to do. Can you help?

Sounds like you were 'fixing' the firewall for Firefox access. If Firefox is working everywhere except your school website, I doubt if your issue is with the firewall.
Please provide a screenshot of that error message.
https://support.mozilla.org/en-US/kb/how-do-i-create-screenshot-my-problem
It is best to use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed a maximum file size of 1 MB.
Then use the '''Browse ....''' button below the '''''Post a Reply''''' text box to upload the screenshot.

My Apple TV stalled during an update and now just shows an image of it being plugged into a USB. It won't complete the update and does nothing when I plug it into my Mac via USB.

2 Apple TVs. The first won't reboot, it stalled during an update and now shows a picture of a UBS plug. Ive tried to plug into my computer, nothing happens. At a standtill.
The second Apple TV works but only if I send something via Airplay. The remote no longer has any affect. The light on the front of the Apple TV blinks when I push a buttom on the remote but nothing happens.
Any Ideas? I am starting to think I need to replace them. Thanks.

Ok, with itunes open on the pc, plug one end of the usb cord into the computer, but not connected to the ipad.
now, press the power button on the ipad until it turns off.
Then, press and hold the home button on the ipad at the same you plug the usb cord into the ipad. DON'T LET GO OF THE HOME BUTTON.
Keep holding the home button until you see the recovery mode message pop on the itunes window.
When that happens, you should now be able to restore.

Why are RAW image thumbnails not being rendered?

OK. I am not sure that I used the right terminology, but I have noticed that Bridge is no longer rendering (? proper term) the Canon Raw image thumbnails properly in Bridge CS6.
I shoot RAW and Small JPEGs. I copy the folder of images onto my external hard from my camera and open Bridge. I see thumbnails of both the RAW and JPEGs with a black border around each image. As Bridge reads each image, the black border disappears from each JPEG thumbnail, but not from the RAW thumbnail like it used to do.
When I click the raw thumbnail once, I get the larger RAW preview image. When I click the larger image and get the loop, the RAW thumbnail then renders and either the black border disappears from the thumbnail or the corrections made in bridge become visible in the thumbnail.
When the loop is on the larger preview image, the image in the loop enlarges automatically to 200% and I have to take the time to scale it back to read the image selection at 100%.
When I do a batch edit of many RAW images in Bridge, I can click done and the small slider in a circle icon appears above the RAW thumbnail, but the thumbnail is not rendered to reflect the correctiuons made to the image.
This was never an issue before. Bridge was great in reading RAW images at all stages and now it's not.
Mac OS 10.9.2
Processor 3.7 GHz Quad-Core Intel Xeon E5
Memory 16 GB 1867 MHz DDR3 ECC
Graphics AMD FirePro D300 2048 MB

Have you selected Prefer Embedded previews from the toolbar, or is it set to High Quality on Demand, or Always High Quality?
Have you tried selecting the containing folder, right-clicking and clicking "purge cache for selection"?
It sounds like you are having problems with the cache. Depending on the number of images you have and the speed of your computer, it might be worth purging the entire cache, but this should be a last resort.

Filter not being generated into where clause

Hi,
I have a simple mapping that has a source table, a filter, and a target table that is set to DELETE. The source table has many rows, but the filter would narrow down these rows by a lot. When I generate the code, the cursor that gets created SELECTs the whole table then there is an IF statement that is applied to each row with the filter condition. A lot less processing would be required if the filter was implemented as a WHERE clause in the cursor, but I can't get it to generate this way. I realize that deletes automatically generate row-based code but it would still be row-based if the WHERE clause was in the cursor.
Is there any way to get it to generate the filter as a WHERE clause in the cursor?

Hi,
In general, Warehouse Builder gives you a number of different operating modes:
- set-based: which does everything in (one) SQL statement. This method is most performant, but has some limitations. Warehouse Builder today does not support set-based deletes (arguably, deletes are not the most common operation in a data warehouse).
- row-based: which is optimal for debugging. In row-based mode, you get as many records as possible and all operations/transformations take place in PL/SQL. This option gives you most debugging capabilities.
- row-based bulk: which is the previous method fetching rows in bulk (e.g. 100 by 100). Bulk processing speeds up the overall processing.
- row-based target only: in this mode we push as many of the operations/transformations as possible into the query (cursor). I.e. your filter (in your case) would be implemented as a restriction on the filter.
- row-based target only in bulk: see previous.
Warehouse Builder's default operation is set-based fail over to row-based. I.e. because we do not support set-based delete statements, I suspect you fall back to the row-based method of execution, which is not ideal in your case. I suggest you use the row-based target only option in order to get optimal performance for your scenario.
Note that for the deletes that are common in DW scenarios the row-based bulk deletes that we generate are often faster than set-based deletes. Also note that if you perform a complete delete (or even truncate) followed by an insert that Warehouse Builder does issue one statement for emptying the table.
Thanks,
Mark.

DV not being broken into individual clips

I just imported some DV from my video camera into iMove HD 5.0.2. Usually, the DV tape is broken into multiple clips about 9 minutes long (2 gig) segments. This time, the tape just ran and I have 1 clip in iMovie Clips pane that is 32 minutes long. This has never happened before.
Any idea what is going on?
David

The 2GB clip limit (9+ minutes) existed in iMovie 4, but not in iMovie 5. Neither iMovie 5 nor iMovie 6 has a limit.
iMovie 6 preferences lets you set the clip limit to what you want.
And of course, all versions let you limit clips to the scene breaks.
If that's not how it's working with your camera, you might want to check that the camera clock is set correctly. When it's not, iMovie can't see the scene breaks on the recorded video.
Karl

My image is not being fed into my podcasts.

Similar Messages

Maybe you are looking for