My iMessage still isn't working?what do I do?
My iMessage stopped working.l earlier today and hasn't come back up.what do I do?
Oh good. I think for some after the Apple servers reset, there needed to be a 'restart' for your phone (s).
Glad you are up and running.
and btw Apple is really very good. I was on Windows since the 80's and they have NO support options, etc. With Apple they truly have a service 'culture' even if it takes a while - at least there are options!
B
Similar Messages
-
I cannot receive messages from iphones since I got a new android device. did the change apple I'd password and whatnot...it still isn't working. what do I do?
Lets take first issue first: Apple does not charge a customer to 'keep' iPad access. That does not happen at apple. If you were billed and charged that amount of money from someone you were speaking to over the phone, you were not talking with Apple support. If you need to speak with apple support you are free to call them at 800MYAPPLE and they will talk to you for no more money than 19.00/ support event.
Please read this article to asssit with imessage and factime troubleshooting.
http://support.apple.com/kb/TS4268
I'm sorry you have this happen to you - that being charged fraudulently for a non rendered service.
Good luck to you Friend. -
I've already tried uninstalling and then installing the quick time again, but it still isn't working. I have an ASUS laptop it that helps.
I think this is a known problem with Lion and some installs of Logic, I've seen it mentioned before.
Contact Apple.
Here is a related thread.
https://discussions.apple.com/thread/3218471?start=0&tstart=0 -
I ran out of data and iMessage didn't work now I have data iMessage still isn't working?
I ran out of data on my phone and iMessage turned itself off now I have data it won't turn back on after trying to re-active it? Any suggestions
iOS: Troubleshooting Messages - Apple Support
-
my iPod nano has stopped working. It is fully charged. I have tried to reboot and restore, and it still isn't working.
What do you mean it is not working? Does it power on? Is it recognized in iTunes? Need a bit more detail in order to assist you here.
B-rock -
I have synced my IPhone 3GS to the newest iTunes version to get IMessage, it worked for a while but now it doesn't work and I have tried resyncing my phone but it still doesn't work. what should I do?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
If you have been through ALL of the troubleshooting steps and you're still having problems, then you'll need to bring your phone to Apple for investigation. -
My phone randomly shut off. When I turned it back on it said it needed to restore, to plug it into itunes. When I did, and tried to restore it, it failed with a code 21. I have followed all the instructions, it still isn't working. I've uninstalled and reinstalled all that the steps told me to, I've updated everything in my computer. I don't know what else to do. My phone will just show the apple sign and the itunes plug in sign.
Hey Carolefromthelou,
The following link will provide steps on how to best remove all traces of iTunes from your PC and then reinstall it:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Welcome to Apple Support Communities!
Best,
Delgadoh -
Just got new Apple TV, done everything it says but Home Sharing still isn't working. Any ideas?
Just got new Apple TV, done everything it says but Home Sharing still isn't working. Any ideas?
Me too I have the same problem as MicheleP57!!!! What can I do???
-
HT5655 The new Flash installer from Adobe still isn't working, right?
The new Flash installer from Adobe still isn't working, right? We get the "installation failed" messages, and we're awaiting Adobe's follow-up on it?
AdmrlLocke wrote:
Adobe Acrobat 8 has two problems on my iMac. The lesser problem comes when I go into the Print command and click "Preview." I get a message that says that Preview isn't supported.
Preview is not supported because building a preview of a print job under OS X involves creating a .PDF file. You already have a .PDF file open if you're using Acrobat, so there's no point creating a new one.
The greater problem just cropped up as I was writing about my problems with Quicktime and Real Player: Acrobat tried to update itself and then gave me a message that says, "Cannot overwrite file /Users/(myname)/Documents/Update5/AdobeUpdater/acrobat8pro-en_US/AUMProduct.dmg .
That's not a problem with Acrobat. The system is saying that you have a file named AUMProduct.dmg in place already, and you don't have permission to update it. You need to change the permissions on that file so that you can update it, or to use an account which has update permission. Or it might just be locked and you need to unlock it. Locate it using the Finder (you have the complete path to the file listed above) and see what permissions are on the file and whether or not it is locked.
You might also just put the entire Update5 folder into the Trash and try updating again.
The file maybe be locked or you may not have sufficient access rights. Please make sure you have write access to this file." Can anyone help? Thanks. -
I have tried every answer and my iMessage still won't work!
Tell us the Whole Story - beginning to end - in detail - use this a s a guide
Quoted from Apple's "How to write a good question"
To help other members answer your question, give as many details as you can.
Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
Describe the problem, and include any details about what seems to cause it.
List any troubleshooting steps you've already tried, or temporary fixes you've discovered. -
Can I get my front camera working? On my iPod touch 5th generation 16gb? As I've reset it all and it still isn't working.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?
I really can't comprehend the logic that leads to believe that password for old apple id will come to e-mail for new id. Buy may be I just misunderstood something. Contact Apple for assist with password retrieval. If you can verify yourself as account owner they may be able to help you.
-
My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Do Not Disturb still isn't working!
Does anyone know why the iPhones do not disturb feature still isn't working. My phone still rings during my set schedule as well as when I set it to do not disturb.
Try resetting your iPhone. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears.
Maybe you are looking for
-
Event 0032 - To create Account Payable in FPCJ
Hi All, I am working in Insurance module - FS CD , in transaction FPCJ. While posting documents by clicking on-account Postings,posting is made to a dummy account, we need to ensure this is balanced to zero i.e there is no balance remaining in
-
Issues while creating new user in SAP HANA
Hello Team When i am trying to create a new user in SAP HANA studio i can see that there has been a new field added of DATA validity where there are two options a) Valid From and b)Valid Unitl . No matter whatever dates i give in
-
When you add a VI to a polymorphic VI, the highlighted VI in the "Instance VIs" is not the one you just added (unless the polymorphic VI has only one instance VI). To recreate issue: create a polymorphic VI, add two instance VIs to it, now add a thi
-
Accessing unix script from Apex
Hi There, Is it possible to access unix script from apex? Or to run a batch file through apex? Please help!! Thanks in advance, Pushpesh Pallav
-
How to debug the formula in the query using RSRT ? Query is calculating after aggreagtion or before aggregation, how to debug the formula ? Any idea ? Thanks Liza