My iMessage will not turn on, what can I do?

I am having problems using iMessage

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • My Ipad will not turn off what can I do ?

    My ipad will not turn off what can i do ?

    Try this.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Let it start up completely and then you can shut down if you want to do so.

  • My iphone 4s will not turn on what can i do

    My  new iphone 4s will not turn on, what should i do

    Has it been fully charged since you brought it out the box?  if you have fully charge it.
    Try a reset holding down the home/power button togetther for 10 to 15 secs or until you see the apple logo and then release.   Wait for phone to boot back up.

  • My ipod touch will not turn on, what can i do?

    My ipod touch 5gen will not turn on. It was working fine at night, in the morning it wouldnt turn on. I left it charging, so my ipod is not dead. I tried turning it on but nothing. My notifications werent coming in. My home button does not work so makes it worse. What can i do? Any suggestions?

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My power cord will not turn green, what can I do

    My power cord will not turn green after preforming an update, what can I do

    http://support.apple.com/kb/TS1713

  • Iphone 4s will not turn on, you can not restore with itunes. What to do? Phone lit white screen and nothing can be done

    iphone 4s will not turn on, you can not restore with itunes. What to do? Phone lit white screen and nothing can be done?

    Reboot computer. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Click the Restore button of iTunes. If still problem, all iPhone 4S have full Warranty. Make Genius reservation and take to Apple for resolution.

  • My imac will not turn over, what should I do

    my imac will not turn over, what should I do

    Just FYI,
    You are not addressing Apple here.
    People here who help troubleshoot and attempt to correctly answer technical questions in these Apple Support Communities are Apple users just like yourself.
    There are two initial things you can try.
    An NVRAM reset.
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    After resetting NVRAM or PRAM, you may need to reconfigure your settings for speaker volume, screen resolution, startup disk selection, and time zone information. The logic board battery helps retain NVRAM/PRAM settings when your computer is shut down.
    IF this fails to help reboot your iMac, you could try an SMC reset.
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Check back if neither one of these solves your iMac's issues.

  • I've just edited all my apple id information and my iMessage will not work at all, can anyone help?

    I've just edited all my apple id information and my iMessage will not work at all, can anyone help?

    Try tapping Settings > FaceTime, turning FaceTime Off, editing the Apple ID associated with FaceTime, and then turning it back on.
    If that doesn't do it, take a look at this Apple doc -> iOS: Troubleshooting FaceTime and iMessage activation

  • HT4993 i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    i am trying to install msnbc app from the app store and keep getting an error message.  The app will not install.  What can i do?

    This is asked and answered many times each day.  The forum search bar is on the right side of this page.
    Disable your firewall/security software and try again.

  • My iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

    my iPhone is fully charged and just gives me a blank screen and will not turn off, what do I do?

    Reset the phone like the manual says:  hold the on/off switch and the home button simultaneously until the Apple logo appears.  May take up to 30 sec

  • I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

    Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
    http://rawtherapee.com/

  • My iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

    my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

    my iphone 4 turned off by itself and will not turn back on. i have tried to 2 methods of recharge and it will not turn on.  can you please help?

  • HT5242 I keep getting an error, and the Java Update will not install. What can I do?

    I keep getting an error, and the Java Update will not install. What can I do?

    Never mind. I kept trying, and finally when I opened "About This Mac" and clicked the software update from there (as opposed to the "Software Update" just below), the Java update finally worked.

  • My new iPhone randomly just stopped working and will not turn on what should i do?

    My new iPhone randomly just stopped working and will not turn on what should i do?

    thanks paul, i just had a similar problem, had to hold it for 30 seconds and the apple sign has come up, my phone was vibrating for over two hours completly unresponsive, now my lap top seems to be comunicating too, oh hello, its back on again...thank you!!!!

  • TS1292 i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!

    i brought my daughter £15 iTunes card. the card has not been activated, I haven't got the reciept anymore. The (not an Apple Store) store i brought it will not activate it. what can i do? please help!

    Does the person who gave it to you still have the receipt ? You can try contacting iTunes Support and see what they say (you will probably need to give them images of the front and back of the card) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Maybe you are looking for

  • Result Caching in Business Service

    Hi, We have a web service to the provider system and need to do the web service result in the Business service. We have enabled the caching and used the Cache token expression as given below. concat($body/sch:Request/sch:ID/text(),'-',$body/sch:Reque

  • Can't get menu to work in brand new ipod classic.

         I cannot get the menu to say anything other than "video" at the top.  I can't get to where it says "music" on the menu.  I've reset 3 or 4 times, but it doesn't help.  I had it at first, but can't get it back. Help!

  • Why can't a user see all files in a network share?

    Windows Server 2008 R2 is sharing a folder. Advanced Sharing permissions give Everyone Full Control. NTFS Permissions give the OU "Operations" read/modify permissions. In the Operations OU, 1 user (let's call him John) cannot see all the files in thi

  • About importing data bases...

    i want to import an access data base to an oracle bata base, but the data is in an "arabic" language so when i converted the access, the data showed in the oracle was not readable... so what to do to convert the data in the arabic language?

  • Mounting Android 2.2 to Arch Linux

    I am no longer able to mount my Android phone to Arch Linux as I used to. Before, I simply used the mount command, and everything would work great. Now when I go to mount my phone with the mount command: $ sudo mount /dev/sdf ~/External mount: wrong