My imovie '11 capture function cannot record audio

I don't know why I cannot record the audio with video using the capture key. There is no problem when I do the recording separately!
Can anyone help answering this, please?

AppleMan,
Thx much. This has been driving me NUTS!
I have already tried the plist deletion and I evn deleted the entire application and reloaded via the APP store and still no luck.
I will try this again, I am tottally baffled that all the videos sounf fine in QT, and FCP, but NOTHING in iMovie '11 (9.0.4)
I have been using iMovie for a long time and this has never happened before????
Thx again and if you have any other suggestions, please pass them along.

Similar Messages

Iphone 4 cannot record audio while video recording

Cannot record audio while capturing video. I cleaned voicerecorder situated next to headphones jag but problem still persist. How I troubleshoot this problem?

Hello Livon4090,
Thanks for using Apple Support Communities.
If you're also having issues with people hearing you on a phone call, along with this issue where you don't hear audio in a recorded video, please follow the directions in the article linked to below.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
Take care,
Alex H.

Cannot Record Audio In CS6

I am trying to record an audio track in Premire Pro CS6 and cannot seem to get it to work.
I have a USB microphone that funcations fine, I can see the levels in Premiere and it reconds well in other programs. When I sletect my track for recording I can see the levels in the Audio Mixer, but when I press Record then Play the levels do not transfer over to the Master track and after I stop recording the audio does not get tracked, it was like it didn't record.
I have followed the steps in this article: http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7f3ca .html as well as other video tutorials from other websites.
I follow the steps exactly and it will not record.

I was actually able to solve my issues. It turns out I had an In and Out point set on the sequence timeline. If you have an In and Out point audio will ONLY record between the two points and no where else. After removing the In and Out points I was able to record audio just fine.

Cannot record audio & video simultaneously

This may seem to be a bone-head question, but here goes:
When I FIRST start a new Captivate project, and choose to
begin my recording, after I select which application I wish to
record from the drop-down list, and then click the 'fit to window'
button, then click record, I get the animated countdown box showing
the 4.3.2.1 sign with a microphone graphic. This would lead one to
believe that as they are recording their screens, the voice
narration into the headset microphone is also being recorded; well,
on my Captivate, no audio is captured.
After the recording is complete and I stop the audio
narration, Captivate compiles the slides and takes you to the
editing screen. None of my slides, despite the voice narration,
contain audio.
It appears the only way I can add audio narration is to first
lay down the recorded screen slides, then record the narration on
"top of" each individual slide. Depending upon the situation and
some general factors, this may NOT be the ideal choice. I realize
that there are benefits to laying down the audio separately and on
an individual slide basis, but I should not only have this one
method - right?
Has anyone else encountered this? Are you also only able to
record audio after the motion slides have been generated? This is
really frustrating when you think you have delivered a fine audio
narration all the way through a recording only to discover no audio
was recorded with the screens/slides.
My headset and record settings are fine and I am at a loss.
Other Captivate users here experience the same thing.
Any help is greatly appreciated. Thanks in advance!

If I've understood you correctly, the "countdown" you are
describing is just the visual signal to let you know when to
begin
the narration. It sounds like you are saying that you think
the recording is over when it hits "zero", but in fact, when it
hits "0", just begin speaking - and moving the mouse through the
application to create the movie.
All of that is assuming you have first connected and
calibrated your microphone, and that the hardware is working
correctly before you begin.
I disagree with your comment that there is EVER a time when
it might not be best to add audio narration after-the-fact, during
the editing stage. It is just a personal observation, but I believe
the "narration during recording" feature is the biggest mistake int
he history of this great application. It just shouldn't be done -
too much like patting your head and rubbing your stomach
simultaneously - requires coordination skills that are waaaaay
beyond those of the average bear. Create your movie complete with
actions, then during editing, add the audio to the movie. It's
quick, simple, and avoids problems with synchronization of hte
audio and the background changes in the movie ... that's just my
opinion, though ...

Cannot record audio whilst recording movie

I could previously record audio at the same time as capturing
screens. However, this does not work now. When I create a new
movie, I have the Record Narration checkbox checked, and in the
Options I have the Record Narration checked. When I click Record, I
get the sound calibration and that works fine, yet when I review
the movie there is no narration nor is there a speaker icon at the
bottom of the slide. I know that it is not my microphone as I can
add audio to the slide aferwards, but as I find narration 'after
the fact' as it were harder to get all the timings correct.
I have reinstalled Captivate to see whether this made any
difference, but I am still having the same problem.
Can anyone help?

I am using Version 1 not Version 2

Cannot record audio using Audition

After I installed M-audio software, I cannot record an audio using Audition. I uninstalled M-Audio software and reboot the PC but still cannot record anything.

This is a duplicate; see other thread.

Cannot Record Audio using Logic Express 7.0.0 on 13" Macbook

Help! I have Logic Express 7.0.0 and am running it in on an Intel model Macbook 1.8Ghz, 13''. I do not have an external soundcard. Will this version of Logic Express allow me to record live audio if I do not have an external soundcard? I only want to be able to record & edit a single audio track, so thought I might be able to. I cannot seem to get the 'R' (Record) button to appear despite activating it in the >View< section, so I cannot arm any tracks, and so cannot record. Is there a bug with this version of Logic and the Intel Macs? Do I need to update? If so, what would be the best way to update?
Regards,
Lee
<br>
Intel Macbook 1.8Ghz Mac OS X (10.4.8) No External Soundcard

I updated to Logic Express 7.0.1 successfully but the problem wasn't solved. Now if I try to update to Logic Express 7.2.0 it says that it cannot find the correct version of Logic Express. Im not sure how updating works - Can Logic Express 7.0.1 be updated to Logic Express 7.2.0?

I have voxer, and my phone keeps saying when I am trying to hold and speak, that voxer cannot record audio without a microphone, please connect a headset and try again.

I have downloaded voxer on my phone, it was working yesterday and today, I put my phone on my docking station and used voxer a few times while it was on there. When I took it off and tried to send a new message my phone keeps saying when I am trying to record a new message, Voxer can't record audio with out a microphone, please connect a headset and try again?
does anyone know how to change it back so it will work again?
thanks for your help

Try resetting your phone by pressing and holding the Home button and the power button unti the silver apple appears. If that doesn't work, contact the developer of the app.

Xperia Z2 Cannot record audio sound louder than a bird chirping without distortion!!

Seriously Sony My Nokia 808 Pureview recorded Loud Concerts perfectly!!! Amazing that i spent 450 Euros on the new Z2 Xperia and the audio recording isnt bad is ABSOLUTELY HORRIFIC!! Why have 4K Video if u cant record the sound. Even at a sports event it sounds Horrible... I NEVER had this problem on my Nokia Pureview... PLEASE FIX THIS!!! IT is totally unacceptable for a Flagship device!!

Because the CEO of Nokia is a moron that should have put ANDROID in the Pureview and that would sell a million units!!
But lastly Windows phone has NO let me repeat NO good apps!! If the Apps were equal, I would have absolutely no issue with getting a Nokia Lumia ahnds down!...You cant even get Tinder on a Windows phone!

Dv6 notebook Cannot record audio

Hi I have a HP Pavilion dv6-6135dx Entertainment Notebook PC, windows 7 and I can't record any audio. The web cam crapped out a few months ago so I don't know if that's related. The IDT Audio HD Codec Driver is installed and apparently up to date. I've tried to record with both stereo mix and integrated microphone array set as default. I've tried sound recorder, audacity, and max msp and I simply can't get any audio signal. My PN is LW262UA#ABA. Thank you.

hI jIM66, Sorry to hear that you are having issues with the sound and recording on your computer. I have found a updated Audio driver for you that may resolve the issue. Please click on the link that I have provided and do the download. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4308... On this same page is a download for the HP Support Assistant. The Support Assistant is a great tool to use if you think you may have issues with your computer. It will run threw a scan on your computer and come back with pin pointed diagnostics so I suggest that you download and install it as well.
If these steps do NOT resolve the issue, please feel free to respond.
Thanks in advance
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Cannot record audio

In ex.8 when I arm a track (by the way, when I do so, it does not bring the audio path dialogue up) Trashed perferences, re-installed, just did the update, checked motu drivers, etc. etc. These are projects from logic ex.7. Recording a no go. When I hit the record button it crashes logic 8, and oddly enough crashes the finder.
Anyone else have this problem.
Thanks

I would check to be sure you can record using another app and the core audio drivers for your Motu. Since these are existing projects I wouldnt expect the audio path dialogue to appear since the path should already be defined in the project properties. You can check the project properties also to be sure it is seeing the audio path. I am assuming - you can playback these existing LE 7 projects okay? Can you save these existing projects?

Cannot record audio track within timeline

I've opened the audio mixer in PP CS4 and can only successfully record a voice over if I move to outside the end of the timeline. Trying to record on an unused track where there are video tracks above results in nothing-no audio track is created.
What am i doing wrong?
Thx.

Once again, thank you to the most gracious advisor in these forums.
I will second that!

Cannot record audio from wave on Satellite A100-PSAA9

Why I can not record realtime Audio Conference with the included RealTec Driver on my Toschiba A100?
Record Options given just, "Microphone-Line In-CD" but Wave is Missing, why?
I have another Notebook from Asus with RealTec Driver and there is it possible, on my Toshiba not, why?

Dear all,
I've read so many posts where people want to record music they hear on their Satellite Notebooks (either wave, or sounds from the internet) and it seems that cornelius solved the "realtec driver" problem - that doesn't meen that it's really a problem of realtec - (where there are only three mixer categories) quite well. But I tried a little - because I don't want to spend 30$ for a new driver and found a cheaper solution (finally I hope, it works at least on my Satellite A100-PSAA9).
What you need is:
first, a program that may record your sounds to mp3 or wave or whatever, I use No23Recorder - but there are lots of other programs working very well. Second you need to buy (mine cost 1) a jack plug (in german: Klinkenstecker) with one male and two female slots. Third, a stereo cable with one jack plug at each end of it (2)
Than you can start recording by putting the jack plug into the headphone slot of your Notebook; than putting the stereo cable into one of the female slots of the jack plug and the other one into the microphone slot of your Notebook. To listen to the things you want to record, put a headset into the free slot of the jack plug - and start recording ;-) !
So if you have enough money and you don't like a bit of cable salad, than I suggest you choose cornelius's way. If you are a poor student like me, perhaps you should try mine?
Cheers, Kat

Cannot record audio since moving to Win 7 64 bit

I have just changed my PC to a refurbished Dell Optiplex 755 running Win7 Pro 64bit with 8Gb RAM and 1 Tb hdd. This was what I felt was the most cost effective option moving from XP as it came with the Windows disc/licence.
I used Laplink PC Mover to make the transition.
The move went reasonably well, but for one thing (which I feel is just a setting that I don

Originally Posted by keithklivideo
I have just changed my PC to a refurbished Dell Optiplex 755 running Win7 Pro 64bit with 8Gb RAM and 1 Tb hdd. This was what I felt was the most cost effective option moving from XP as it came with the Windows disc/licence.
I used Laplink PC Mover to make the transition.
The move went reasonably well, but for one thing (which I feel is just a setting that I don
Hi keithklivideo,
Which Creative product are you using??
The message you have posted here in the forums seems to be incomplete
Can you try to avoid using apostrophe once you post again? I noticed that excerpts that have apostrophes are somehow cutting off the rest of the message in this forum platform..
Cheers!

IMovie 9.0.2 - iSight camera captures video but no audio?

I tried to add a video of myself by ticking the "camera" button and using the iSight camera.
The video is fine but there is no audio.
I have the internal mike selected in System Preferences and everything works OK if I use PhotoBooth to record.
But when I record from iMovie I get no audio.
Any ideas what I may be doing wrong?

After a search I found a similar problem from 2 years ago but with no solution.
I then decided to trash the preferences and found 2 files which I trashed.
On restarting iMovie I was able to record audio from the iMac mike.
Only the second, larger file was replaced so I think the other may have been a remnant from iMovie 6.
Whether it was the presence of 2 .plists that caused the problem I do not know?
It may just have been a corrupt .plist.

My imovie '11 capture function cannot record audio

Similar Messages

Maybe you are looking for