My important annotations on acrobat for android are missing! What do I do?

Help. I annotated some very important documents on my android tablet in acrobat and the annotations have gone missing. How do I get them back!?

Actually, if you know of any nice PC stores, they could help you with determining what needs to be done. Memory slots are memory slots, whether they are PC or Mac. If you look at the memory already in your computer, how many do you have? If you have two sets of two, then you very well might have no additional slots to put memory in. The lower level Macs did only have four total slots. For instance, my dual 1.8 only has four slots and only supports up to 4GB of RAM. If you have the actual slot that the memory fits in, but the clips that are on the ends of each slot are missing, then you should be fine to add more RAM.

Similar Messages

Acrobat for Android - License question

We are going to use acrobat on some Android devices connected only to corporate network (no Internet connection) and each device is going to be used by many users.
I have downloaded the APK file from Adobe, and published this as test to the devices using Mobile Device Management. We contacted Adobe support if this was OK license vice, but was asked to post the question here as they did not support the mobile versions...

What? Acrobat for Android, I don't think so.
There is an Adobe Reader for mobile devices only you can download for free.

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."

When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

When opening iTunes, I get the following error message: the registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.

When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

When i click on itunes to open, message says: the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes. I'm inexperienced. Please help

When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie

Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?

I just installed the latest version of iTunes, but when I went to open iTunes I got a message saying registry settings used to for importing and burning CDs and DVDs are missing and I should reinstall iTunes. Really?

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Proposal for acrobat for android!

I have a proposal. In acrobat for android it needs to fix text from left to right that it could not be moving after increase or decrease.

paulcb wrote:
Apple, like most companies, does not accept unsolicited ideas...
http://www.apple.com/legal/contact/
http://www.apple.com/legal/policies/ideas.html
That never entered my head, any way I can "retract" my previous statement ?

ITunes drivers for importing and burning CDs and DVDs are missing

Hi,
I recently switched from a relatively small drive to a much larger one and had the larger drive taking image of the older drive. All of my older programs are now back up to working but I can still can't burn a CD.
I get the following error message "the registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes a few times and have done soft and hard reboots but still no luck. Any ideas on the simplest way to resolve this matter?
Thank you
this is the result of the diagnostic:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
System manufacturer System Product Name
iTunes 11.3.0.54
QuickTime 7.7.5
FairPlay 2.6.12
Apple Application Support 3.0.5
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0031B3A80E383418
Current user is not an administrator.
The current local date and time is 2014-08-26 07:06:48.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GTX 570
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.3.0.54 (x64) is currently running.
iTunesHelper 11.3.0.54 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.

You posted here --> Apple Support Communities / iTunes / iTunes for Mac
I will request this be moved.

The drivers for importing and burning CDs and DVDS are missing, it advised reinstalling but a reinstall does not fix

When I open Itunesthis message appears
"The regidtry settings used by the iTunes drivers for importing and bruning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes"
I have tried reinstalling mulitple times and it has not helped. I am not aware that any other CD burning softawre being installed.
Also, when I plug in my I-pod another message appears saying
"This Ipod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
The 64-bit version is already installed and again reinstalling hasn't helped.
What is wrong? Can anyone help?

I think you might have two different things going on at once here.
Let's try fixing the following one first:
"The registry settings used by the iTunes drivers for importing and bruning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes"
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Itunes drivers missing for importing and burning CDs and DVDs are missing

Hello,
I have been dealing with the following problem for a couple days now, I have searched all over the internet, talked to friends and even Apple tech support but the problem has not been solved.
Whenever I access itunes, I get the following warning: "The registry settings used by the itunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other burning software. Please reinstall itunes."
I have now reinstalled itunes several times and completely removed then reinstalled as instructed, but the message continues to appear and itunes will not allow me to burn cds. Tech support advised to create a new user account on my computer which I did, it seemed to work but all I can do is import music. I cannot burn any. All my settings and playlists aren't on this account. But, are on my other one where the first message appeared.
Can anyone help? Please. I have struggled with this and cannot figure out what else to do except reset my computer to its factory setting, but would really like to avoid doing so. Please help.
I have a new HP computer running Windows Vista, I have never experienced any problems with itunes until now. I bought a new 120GB ipod in November and it works fine. Oh, I have gotten rid of Nero which was installed when this problem first occurred.
Thank you.

Hmm. "iTunes registry error Vista fix burning and importing issues". play around with the search words till you find something relevant. Not sure, but following is something that might help. I am not a vista user so I can't help much. Good luck.
http://www.vistax64.com/software/194044-itunes-registry-error.html
*But be warned that messing with registry might be fatal to your current OS intallation. So think all the way through before you do anything. I think you can keep a back of the registry so if something goes wrong you can restore it, but thats in XP, not sure about vista.*

Error msg at launch says "Registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. ... Please reinstall iTunes."

Each time I launch iTunes (latest version) on Windows 7 (w/ latest system updates) I receive the following error msg:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
When I click on "OK" iTunes completes the launch process and the application functions properly. This error msg appears without fail every time I launch the app.
I have reinstalled iTunes four times and continue to receive this message. iTunes is set in the system Control Panel as the default program for all functions that iTunes uses. I never burn CDs or DVDs and have never attempted to do so on this machine. I have had iTunes on this computer since I bought it last November and never had a problem with it until 2 months ago when this message began popping up. I did not notice any action I took that caused this, in terms of creating conflicts.
I hope someone can assist me in finding a way to stop this annoying error! Thanks!
David

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Important global parameters from Financial Accounting are missing for Asset

Hi friends,
When I'm trying to assign CHN Chart of Depreciation to c.Code 0319 the below error message is giving by SAP Sytem. This Chart of Depreciation is already 4 C.codes are using.
Could you pleasea provide the detailed procedure...
Error Message is:
The result of the check of company code 0319 shows that important global parameters from Financial Accounting are missing for Asset Accounting.
One or more of the following fields are affected:
Currency
Chart of accounts
Fiscal year version
Input tax indicator for non-taxable transactions
Thanks,
shafi

Hi Shaik,
The solution is in the error message itself i.e
Input tax indicator for non-taxable transactions
Firstly you have to create tax codes for non taxable transaction in TR Code FTXP for the respective company code.
Secondly you have to assign these tax codes to your company code in TR code OBCL and save
Then You can proceed and do the assignment of Chart of Depreciation to the Company code.
I think this will solve the problem.
Regards
Pratiksha
*Please assign points if helpful

Itunes keeps telling me "the registry setting for importing and exporting and burning cds are missing" reinstall itunes. I have reinstalled itunes about 30 times and still get the same message. I do not have another cd burning software loan

I keep getting the message "the registry settings for importing and exporting and burning cds are missing. Please reinstall itunes. This may be the result of other cd burining software on your computer" I do not have another CD burning software on my computer and have reinstalled itunes about 30 times and still get the same message and am not able to burn CDs. All of my drivers and firmware are up to date. Please help

Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems?

The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing

Error on Itunes start-up. Must click OK before Itunes will start.
The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes.
I have reinstalled iTunes using their complete uninstall instructions.
iTunes does seem to work after OK is clicked, I'm just tired of having to hit OK.
Other thoughts... This started after the iTunes update required to go to IOS 6 for my devices. I'm able to sync my devices. It is possible that ZoneAlarm (my Antivirus and Firewall) got in the way at install. It flagged something and I denied it. I was doing multiple things at the time and the flag did not have any indication about iTunes. I have tried shutting down ZoneAlarm for the install and that has not helped either.
Will try another full uninstall that includes uninstalling ZoneAlarm...

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

My important annotations on acrobat for android are missing! What do I do?

Similar Messages

Maybe you are looking for