My in app purchase will not complete the transaction

I am being redirected to support as my app will not purchase the add ons? Help?

Click here and ask the iTunes Store staff for assistance.
(107621)

Similar Messages

  • My iPhoto app will not complete the installation of an update

    My iPhoto app will not complete the installation of an update.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off the router and then power it back on
    - Reset network settings: Settings>General>reset>Reset Network Settings. You will have to rejoin all networks

  • IMovie 9.0.7 will not complete the update either with the download dmg file from the apple site or from the OS software update. I would appreciate some advice.

    When installing the new update 9.0.7 to iMovie either via a dmg file or from the software updater the install will not complete the installation. The indicator bar just stays in the same place with the note install time remaining about a minute. I have let it set for hours and nothing happens. Does anybody have any advice?

    Try this.
    After signing into the Mac App Store (MAS) with your iTunes Apple ID, look at the Purchased page. You should see the three bundled iLife apps listed with Accept buttons. After you have accepted them and Apple has verified that they came on a new Mac and assigned them to your Apple ID and iTunes/MAS account, you should be able to update them.

  • My iPad 2 will not complete the download of software upgrade 6.1.2?

    Hi. My iPad 2 will not complete the download and install of the iso 6.1.2 software upgrade to fix the calendar exchange that is draining battery. It goes through the process and then just says there is an error but does not indicate the error. Any ideas gratefully accepted.
    Also I don't know if it is connected but  it also will  not download new apps or iBook I purchased. Please assist if you can.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off the router and then power it back on
    - Reset network settings: Settings>General>reset>Reset Network Settings. You will have to rejoin all networks

  • App updates will not complete download?

    I have 4 apps that show updates but will not complete the updates.  This has been going on for a couple of days.  Any suggestions on how to fix problem.  My Internet connections is on and working for other apps

        @Stevec0331
    I always enjoy looking at what applications are ready to be updated. Often times these updates bring about great new features to the device. I notice that were working an Apple device. Once you head into the App Store, it will advise to Update All or you may individually tap update for each app. I would ensure that a data connection or wi-fi connection is available while processing the update of applications. I'm sure you will find this information beneficial. 
    YosefT_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • My I phone 4 will not complete the backup to i cloud.

    My I phone 4 will not complete the backup to i cloud.

    Try deleting your last backup by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on again.  If it still won't back up, you may have an app that is preventing the backup from succeeding.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • HT4009 Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    Not very user friendly! Where is the place to report a problem!? I have been billed for an in-app purchase but not had the goods - I received an error message telling my I hadn't been charged at the time and now it is on my bill! What can I do?

    You can try contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • HT3669 My Epson Perfection 1200 scanner functions as a flatbed scanner but when I try to scan transparencies the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimet

    Epson Perfection 1200 scanner continues to function as a flatbed scanner but when I try to scan transparencies/film negs the control panels change in  Image Capture but the scanner bar will not complete the overview scan  & cannot travel beyond the first 2/3 centimeters. All the communications seem to recognise the scanner and the mode for the intended scan but the necessary overview scan is not completed, nothing comes up on the Image Capture scan window. If I unplug the film adaptor I can get a document scan. When I plug in the adaptor again the Image Capture details change which allows me to select the type of scan required but when the scanner attempts an overview scan it is unable to complete it.
    I have had the scanner from new (12 Years) and have previously scanned slides and film with the adaptor but maybe this was before I upgraded my computer (imac 27").
    Do I have to buy a new scanner?  It seems so close to working correctly. 
    I have downloaded the Epson recommended driver (5.4) and have Epson Perfection 1200 6.6 Universal showing in the Applications List.
    Any thoughts or observations would be much appreciated before I go out and spend money an new hardware.
    Thanks

    I have same issue - have you solved this yet?

  • My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

    My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
    I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
    I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
    When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
    I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
    The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
    My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
    Any help is appreciated.

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • My time machine will not complete the back up.  It say that my sparsebundle is already in use.  What do I do and how do I fix it?

    My time machine will not complete the back up.  It tells me that my sparsebundle is alreay in use.  I currently have imac ungraded my sofeware to the latest.  What do I do to correct this?

    Try here...
    The Backup disk image ... sparsebundle ... is already in use.
    From Pondini’s excellent Information Here...
    http://pondini.org/TM/Troubleshooting.htm

  • HT4061 I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • HT1386 My iPhone 4S will not complete the sync process with iTunes. The sync process will not complete Step 3 of 6 (Preparing to Sync).

    My iPhone 4S will not complete the sync process with iTunes. It hangs up on Step 3 of 6 (preparing to sync). Prior to trying to sync the iPhone I updated iTunes. Any suggestions?

    I've already tried unplugging the iPhone and restarting my computer - twice.

  • Firefox will not complete the installation even after several attempts of rebooting the computer.

    I downloaded the Firefox 9.0.1 upgrade but it will not complete the installation on my computer. Everytime I try to remove the program, it tells me to reboot the computer to finish the installation. After several reboots, the same error keeps coming up.

    Try to run the Firefox program once as Administrator (right-click firefox.exe: Run as Administrator).
    If that doesn't solve the problem then remove the Firefox program folder (C:\Program Files\Mozilla Firefox\) to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • TS3212 I'm trying to download i tunes for windows 8 but it will not complete the process?

    I'm trying to download i tunes for windows 8 but it will not complete the process

    does it give you an error message?

  • IPhone 4s will not complete the recent download of iOS.702

    My iPhone 4s will not complete the most recent download of the iOS 7 too. It accomplishes about 20% and freezes. I have tried resetting several times. Same result. The phone is for all intents and purposes locked up on the download screen. Has anyone else had this problem.? And how was it solved? An online search shows nothing regarding this problem.

    I've already tried unplugging the iPhone and restarting my computer - twice.

Maybe you are looking for