My inbox messages are labeled as "Read Only" and I cannot delete them

The messages in my inbox have been marked as "read only" somehow and I cannot delete them or move them to the trash. When I click on them I can read them but they stay black instead of turning to grey, so my unread mail count never goes down. It is an AOL account and the only way I can delete them is to go onto AOL.com and delete them from there.
Is there a way to get rid of the "read only" I don't know how it got there to begin with. It just started happening about a month ago

Connect the phone to the computer and set it to sync only the photos you want on the phone.
<http://support.apple.com/kb/ht4236>

Similar Messages

  • Emails kep appearing in my inbox that have no content , no subject and I cannot delete them.  I have about 10 now.  What can I do to get rid of them?

    My email server is comcast.

    Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'.
    If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Where are movie downloads stored? And can I delete them after watching?

    I downloaded a show to my Android & wanted to move it from internal storage to my sd card  but i cannot find where the show is being stored so I can delete after Im done watching... Where is it?

    You are unable to move it ( copyright reasons)

  • I've updated FF to 15.0.1; now there are no new tab boxes, and I cannot delete a tab with scroll wheel.

    I'm using Windows XP.
    So, there used to be a little square box next to last tab opened that I could click on to open a new tab. Now I can only open a new tab if I double click on blank space next to last tab opened.
    And I used to be able to open a bunch of tabs, do what I needed to do, and then click center scroll of mouse down the line to delete what I no longer needed. Now the only way I can close tabs is to use the x on the right-hand side of the tab I'm currently on. But, sometimes it does work...
    Nothing has changed about how I have FF set up--just the update.

    Thank you for the answer about the customize window. That solved one problem. As far as the other issue, I've gone back to an earlier version of Firefox so that I can once again use center scroll to delete tabs.

  • TS1363 How do I remove some photos fro my Iphone that went on there accidentally when I got it ? They are just pic files that were on my computer and I cannot delete them just from my phone

    Hello when I got my Iphone 4s and plugged it into my laptop and it started to sync I didn't realize that it also put Photo Folders with many pics on my phone and I want to remove them but can't do it like I can with the pics I have taken with my phone. I want these other Photo Files off my phone as I know they take up room

    You remove them the same way you put them there.  The sync process.
    Deselect them in itunes and sync.

  • Some incoming messages have a blue dot and i cannt delete them

    i have about 12  incoming messages that  have a blue dot and i cannot delete them
    the message is from "no subject" and it says no content
    when i click edit i dont get a white dot that i can mark to delete
    help

    Reset your phone--hold the home button and on/off switch for about 15 to 20 seconds, past the prompt to turn off and release when you see the Apple logo.
    If this doesn't solve your problem, delete your email account.  Reset your phone as above, then reinput your email account.

  • How can I get a birthday reminder from items which are in the read-only cal

    I am looking for a solution to get a reminder message for birtdays which are within the read-only calender imported/updated from he address book. I so far have not found the option where to turn on the reminder and I do not want to duplicate items (ie creating another birthday calender inside iCal).
    Thanks for comments.
    PB G4 Ti, 1GHz, 10.2.8   Mac OS X (10.4.7)  

    Hi ontour,
    This limitation is one of the many reasons I wrote Dates to iCal. It is a replacement for the Birthdays calendar in iCal, so you would need to turn the Birthdays calendar off in iCal's preferences.
    See here: http://discussions.apple.com/thread.jspa?threadID=466478
    Best wishes
    John M

  • All of a sudden my outlook inbox messages are all scrambled by date instead of being sorted by most recent at the top...how do i sort them by most recent at top (which is suppose to be default)

    all of a sudden my outlook inbox messages are all scrambled by date instead of being sorted by most recent at the top...how do i sort them by most recent at top (which is suppose to be default)

    As far as I can tell, there is no way to reverse the sort.

  • In the new version of Thunderbird it seems impossible to set that attachments are shown as"Read only". It was possible in previous versions. Can anybody help?

    In previous version of Thunderbird it was possible to set that incoming attachments are shown as "Read only". The solution was to set browser.helperApps.deleteTempFileOnExit as TRUE. In the latest version, no matter how I set this value,. the attachments ARE NOT shown as Read Only. As I need my attachments to be shown as Read Only, I had to restore older versions of Thunderbird. Does anybody have an idea how I can solve this in the new version of Thunderbird ?

    ''Wayne Mery [[#answer-672415|said]]''
    <blockquote>
    hmm, https://bugzilla.mozilla.org/show_bug.cgi?id=1009465 and https://bugzilla.mozilla.org/show_bug.cgi?id=1095893 seem relevant
    </blockquote>
    I don't see a solution on these links. I am not a computer expert, but it was easy to fix in previous versions of Thunderbird. I can't do it now with the latest version, on either Windows 7 or 8.

  • Yahoo mail, problem messages are marked as read

    hi,
    i am able to read the messages from yahoo mail using pop3, but even new messages are marked as read once retrieved through client code.
    How to leave new messages as unread?
    Thanks in advance.
    Regards,
    -Satish.

    As explained in the JavaMail FAQ, the POP3 protocol,
    and thus the POP3 driver for JavaMail, does not
    support any flags for messages.
    I don't know what you mean when you say that new
    messages are marked as read when retrieved by
    client code. POP3 doesn't know what's new or what's
    read. The Yahoo web interface might be assuming
    that messages retrieved by a POP3 client have been
    read, however. I don't know of any way to control
    that.

  • I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone.

    I recently got an iphone 5S and my songs not purchased from iTunes are grayed out (phone only) and are skipped past when playing them through my iPhone. i have tried the following:
    1) Removing all music from phone and resynced to iTunes PC library.
    2) Erased phone and restored from back up
    3) Erased phone and started as a new iPhone
    4) Reformated the music files in my library that weren't playing
    5) Deleted songs from iPhone and computer and re-imported CDs
    6) Tried to redownload my COMPLETE MUSIC LIBRARY from iCloud.
    7) I have also turned it off and turned it back on several times
    8) I tried syncing through my macbook (only moved partial songs to it to see if it would even work).
    9) I have tried to get Siri to play them, did not work.
    10) All music does play fine on my iPod Touch 3rd (iOS6 i think) gen and iTunes on Mac and PC
    11)  I added a CD to my roommates iTunes and it plays on their iPhone 5S but not mine.
    After all of these things it is now WORSE!!!  My iTunes purchased songs are now experiencing the same issue along with some (not all) of the original music files that were skipping and grayed out.  My conclusion is i have no clue at this point!  I have done everything i have found online in EVERY discussion, i have spent over 60 hours trying to get this to work and i am asking myself, i bought this product why am having to fix this when it worked just fine on my iPod touch (3rd Gen) and iPod Classic!!!!  PLEASE APPLE FIX THIS ISSUE FOR US!!!! 

    I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
    i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
    so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
    hope this helps!

  • Ipad form ....help needed please.  Clear form after email as read only and sequential numbering

    Hi
    i am a complete novice at this however this is what I want to achieve.
    i Have a paper duplicate report sheet that I want to get electronically, I want to be able to add sequential numbers to each report and be able to email the report to the client from a email field in the form
    so far I have so I have created the pdf form, I have a button that runs a JavaScript that will hide the submit button and then send to the clients email and to bcc myself so I have a copy of the report also. This has been tested and works
    i Am struggling with sequential numbering and once the form has been emailed it's un-ditable as the JavaScript has converted it to read only for emailing which is good as it can't be edited. But Is there a way on my submit button to email the report as read only and then clear all form fields in the report ready for filling with the next sequential number?
    I Have had a good look sound for a resolution to this but am struggling
    many thanks in advance for any feedback
    paul

    Hi Paul,
    I presume that you are using the desktop version of Acrobat Pro to author the form.
    I will move this discussion to the PDF Forms forum so that the experts in the forum can answer your question.
    Please note that the Reader/Acrobat DC mobile apps (for iOS, Android, Windows Phone, etc.) have limited JavaScript support.
    JavaScript for Reader Mobile API Reference (iOS)
    You may be able to make the form work as you want in the desktop version of Adobe Reader/Acrobat Reader DC.  However, some functionality (e.g adding a sequence number to each PDF) will not work in the mobile apps due to the limited JavaScript support.  Sorry for the inconvenience.

  • When I converted a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text.  How can I solve this problem?

    When I tried to convert a file from PDF to WORD.DOC it opened as Read Only and I'm unable to alter any of the text.  How do I solve this problem?  I don't know how to change it from Read Only.

    Dear Sara
    Thank you very much for sending the converted file.  Yes, I am able to edit it - that will be very useful to me and I appreciate your help.
    Referring to your previous message when you said you'd converted via Acrobat and not Acrobat.com, I'm converting via Acrobat.com because that's the only option that is shown (how do I convert via Acrobat? - perhaps that would be more successful).  I'm using the Export PDF website, and the OCR is enabled to "Recognize text in English UK".  However, I've just tried converting a different LPA pdf form, this time for Health & Welfare https://www.gov.uk/government/uploads/system/uploads/attachment_data/file/245571/LPA114_He alth_welfare_LPA.pdf and again I have the same problem as before.  I've altered it from "Read only" and thought I'd then be able to enter text, but "Drawing Tools" is shown in the pane and I'm unable to enter anything onto the form - everything appears to be in images.  Also, the lettering on the heading of' page 1 has become jumbled, with the word "Public" overlaying the word "Guardian."  Any suggestions as to what it is I'm doing wrong would be welcome - I don't like to be beaten!
    Regards,
    Judith.

  • SD card is suddenly read only (and it never used to be before).

    I'm not tech-svvy at all, so I'll try to be as detailed as I can with my problem and hopefully some patient soul will be able to give me some step by step instructions on how to fix this haha.
    I've had my MacBook Pro for about a year now and I haven't had a problem with transfering photos from my phone and camera onto it. My camera has an SD card and my phone has a Micro SD.
    As of a few days ago, I've noticed that when I insert my SD card into the slot, there's an icon to the top left side of the window when I open it that never used to be there. It kind of looks like a pencil with a line going through it, but it still let me transfer photos to my computer, so I didn't think anything of it.
    When I tried to transfer photos from my phone's Micro SD, it does the same thing. I can still transfer pictures to the computer without a problem.
    The issue becomes when I want to transfer photos from my computer to the card for my camera or the one for my phone. I've tried to look through similar questions on here and elsewhere on the internet, but all I've been able to gather is that the little pencil with a line through it means my cards are in "Read Only" mode as opposed to the "Read and Write" that they should be in.
    I don't recall making any changes to any sort of settings on this computer and I haven't had any recent updates to the software.
    Also, none of the cards are locked. I know there's a little swtich to the side of them that manually makes them read only, but I never touch them and they're always 'unlocked' as it were.
    Can anyone guide me through getting these settings back to the way they were?
    (Since I'm technologically illiterate, I have no idea what operating system I'm on, so I apologize if this is an important factor in helping me.)

    The contact inside the SD card slot could be dirty. you can try to clean them by shutting the system down, get some electrical contact cleaner and put a small amount on the SD card contacts and push it in and out a few times. Let it dry for a few minutes (most of these type contact cleaners alcohol based and dry fairly fast) and power up the system. See if the cards are now Read+Write.
    Also check the cards to see if the little switch hasn't been pushed into the Lock setting.
    Even though these card may work in your camera and or phone they may be at the end of there life cycle. Try a NEW card and see if that makes a difference.
    As a last resort you can always buy a external card reader and connect it to a USB port.Some SD cards come with a small SD card reader that plugs directly into a USB port. The only problem I've had with them is that some of them do not go in all the way on MBPs. The case of the MBP stops them from inserting all the way and or if you have something else plugged in to the other USB port there isn't enough room, right to left, to insert another device. Or you could spend some more money and have Apple Care fix it, that is if none of the above work.
    Good Luck.

  • How do I flag and DELETE all messages in my IN basket -- Seems that if I delete them one by one they still indicate being there even if there are NO messages

    When I retrieve mail and delete the message I still see the message count even if all of the messages are gone

    I had tried that and it appeared to select nothing, so I got thrown off. But yes, I should have tried the delete button at that point. Then delete the swatch, then copy it all and paste it into a new file. The paste-in is my primitive way of confirming what's actually there. I'm sure there are more elegant ways.
    Thanks, guys.

Maybe you are looking for

  • Adding print button to interactive report

    For now I have the downloaded to PDF option checked so the user can print an interactive report via the widget. I would like to have a print button on the report also. Has anyone got any of the java script stuff working off of a button?

  • How can I share a project specific calendar I created on Entourage 2008 ?

    How can I share a project specific calendar I created on Entourage 2008 without showing my personal calendar? I created a project specific calendar using Entourage 2008 for Mac. I want to add someone that uses Outlook from a PC. We are in the same ex

  • How do I get the Up to date OSX?

    Hi, so I've tried to get the free download of the OSX Lion, as I bought my MacBook in June, but it never goes through. I've tried to redo it but now it says that I cant because I already registered my MacBook to get the update. Help, please?

  • How to create new text symbols for the standard program.

    Based on the customer's requirement, I need to create a new implicit enhancement for the selection screen. I want to create new text symbols for the parameters and blocks, but I cannot change the standard ones. Does anybody know something about that?

  • Image Conversion with Byte Arrays

    I'm trying to read in a byte[] for JPG, PNG, BMP, and GIF files which will then be converted to a .TIFF file so it can be printed on Post Script printers. Technically I have it working BUT the catch is that it physically needs to create the file. I'd