My installation fails with U44M1P7
Been browsing different forums to find a solution, as Adobe removed the option to enter new support tickets . I'm running W7Pro/64 and got the Extention Manager 6.0.5. update today. Failed on error code U44M1P7.
My error log says:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {7E13F325-CE11-42B3-BFD8-C15A8296EACB} Adobe Extension Manager CS6_6.0.5_AdobeExtensionManager6.0All 6.0.5.0 -----------
ERROR: DF022: Pre checksum mismatch for file "C:\Program Files (x86)\Adobe\Adobe Extension Manager CS6\Replace.exe"(Seq 33)
ERROR: DW063: Command ARKPatchCommand failed.(Seq 33)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Extension Manager CS6_6.0.5_AdobeExtensionManager6.0All: Install failed
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Unfortunately I'm not able to de-code this. Anyone out there who can read and understand what I should do?
Regards Hans
Branching this to a separate discussion as your installation log is different than the one posted in http://forums.adobe.com/thread/1036343. The DW063 error indicates a permission issue. I would recommend you review your installation log in it's entirety by following the steps listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
For information on how to correct file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
Similar Messages
-
Update to Latest Photoshop CC fails with (U44M1P7)
Update to Latest Photoshop CC fails with (U44M1P7) any ideas why
Please verify your Ps version from Help→System Info, it should be 14.2
Also provide us with snapshot of the error and the following files.
You can find them at:
Installer logs
For Mac:
Library\Logs\Adobe\Installer
For Win:
Program Files(x86)\Common Files\Adobe\Installers
AAM logs
For Mac:
/Volumes/%Volume Name%/Users/%Username%/Library/Application Support/Adobe/AAMUpdater/1.0
For Win:
C:\Users\\AppData\Local\Adobe\AAMUpdater
You can zip all the files together and send us through mail ([email protected]). This would help us in finding the root cause.
Appreciate your help. Apologize for the inconvenience.
Regards,
Ashutosh -
Windows Server 2008 R2 Service Pack 1 installation failed with error code 0x800f0a12
Hello,
I'm facing problem to install windows server 2008 R2 SP1. I cannot install SP1. In this server have running Exchange 2010 server. to update Win2008 R2 SP1 facing the following error:
1. Service Pack installation failed with error code 0x800f0a12.
2. Installation Failure: Windows failed to install the following update with error 0x80070643: Windows Server 2008 R2 Service Pack 1 for x64-based Systems (KB976932).
Please suggestPlease run the system update readiness tool.
http://windows.microsoft.com/en-us/windows7/What-is-the-System-Update-Readiness-Tool?SignedIn=1
Then post the complete contents of;
%SYSTEMROOT%\Logs\CBS\CheckSUR.log
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
Hello World,
I have this remote server that used to be a sms 2003 secondary site server. We uninstalled the SMS role. And used the server as an SCCM remote distribution point. We also want to install an client agent on that server machine. But no mather how i try
to install the client i always see the same error in ccmsetup.log:
File download 100% complete (17847296 of 17847296 bytes). ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Download complete. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Successfully downloaded client files. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Searching for available transform ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Failed to find resource file 'client.mst' ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
No transform available for this locale. Installation will proceed with no transformation. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Updated security on object C:\WINDOWS\system32\ccmsetup\. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
An MP exists on this machine. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
The client version 4.00.6487.2000 does not match the MP version 2.50.4253.3000. The client will not be installed. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
Deleted file C:\WINDOWS\system32\ccmsetup\WindowsServer2003-KB923845-x86-ENU.exe.download ccmsetup 8/18/2010 9:17:18 AM 9916 (0x26BC)
I think the installer finds some remenance of the old SMS_MP. When looking i found some remains in IIS . I tried to remove the remains but still have the same error when installing the client. I uninstalled IIS completly. Can someone tell me where the client
installer looks for the MP version? Would it help if i installed an SCCM MP on that server and the uninstalled it (Upgrade the MP)?Hello Kent, i ran the ccmclean.exe from the SMS2003 Toolkit. It informed me that my system was cleaned. I ran the sccm client setup manualy and found this in the ccmsetup.log
MSI PROPERTIES are SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
IsFileMicrosoftTrusted Verified file 'C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi' is MS signed. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
Running installation package
Package: C:\WINDOWS\system32\ccmsetup\{4CD82FBB-0AFC-4864-A089-15364DF5F14B}\client.msi
Log: C:\WINDOWS\system32\ccmsetup\client.msi.log
Properties: SMSSITECODE=AUTO CCMHTTPPORT="80" CCMHTTPSPORT="443" INSTALL=ALL ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: INSTALL. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: WindowsFolder.8AE6A59B_5597_4D75_9BFD_7F566BF56500. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.98C5B086_7EB0_422A_B0A8_674010F525CD. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SystemFolder.4C5E03E8_F8E5_47CB_8FF4_E46FE34D35A6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.597B26B2_B5D6_40FF_90DA_B8E672626B1D. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: System64Folder.541D9CA5_CE53_4DCE_903A_9B9E5A6EF2C6. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:21: SmsCheckConfig. ccmsetup 8/18/2010 10:48:21 AM 3140 (0x0C44)
MSI: Action 10:48:22: SMSValidateClientInstallStamp. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: LaunchConditions. Evaluating launch conditions ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectWindowsEmbeddedFBWF. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsCheckNewRemoteTools. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: AppSearch. Searching for installed applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: RMCCPSearch. Searching for qualifying products ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: ValidateProductID. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: BCDSetX64Dir. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetInstallDirFromCmdLine. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: CcmSetPrimaryFolder. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: FindRelatedProducts. Searching for related applications ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: Action 10:48:22: SmsDetectInvalidOrderColocUpgrade. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
MSI: An older version of the SMS Management Point is installed. Please upgrade the Management Point before attempting to upgrade the client. ccmsetup 8/18/2010 10:48:22 AM 3140 (0x0C44)
Installation failed with error code 1603 ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Next retry in 120 minute(s)... ccmsetup 8/18/2010 10:48:23 AM 3140 (0x0C44)
Their must be something remaining that ccmclean can't find or can' access so i ran ccmclean /mp. This did some stuff and told me the system was clean again. I reran the client setup.
Guess what
It worked !
Thanxs Kent -
App installation fails with error 0xE8000004
hello,
i have purchased a navigation (GPS) application for iphone and ipad but installation fails with error 0xE8000004, even if the application is the only one (i have removed all other apps). I have tried on iphone and ipad and using different OS: Windows 7 professional 64 and Windows XP 32.
Has anyone an idea of the problem ?Already done and this was the reply:
Response (Frederick) - 03/01/2011 12.59 PM
Dear Ettore,
Thank you for contacting CoPilot Technical Support.
If you are experiencing download issues between two Apple platforms (here between the iPhone and iTunes), I advise you contact Apple directly from your purchase history in iTunes then 'Report a problem' as ALK is not in charge of the installation on this device.
Then i contacted Apple and the reply was:
Ettore, please call up to the iPhone technical support. To find the appropriate phone number, please visit:
http://www.apple.com/support/contact/phone_contacts.html
I am a little bit disappointed. -
Installation fails with "internal error 2502"
I have a client running Windows Vista Home Premium Edition (32 bit) and my app's CVI-built installer fails with "Internal Error 2502".
This installation kit has been successfully deployed on hundreds of computers with various versions of Windows and I have never seen this one. No device drivers or advanced libraries - just the standard runtime. I use CVI 9.0.1.
Searches reveal very little - some old issues with Office installation, date/time settings etc. but I have yet to find anything that indicates what this error represents.
Any insights or ideas very welcome.
Thanks,
Ian
Solved!
Go to Solution.That appears to be a Windows Installer (MSI) error, and can have many different causes. Can you confirm that anyWindows installers (perhaps try newest Adobe Reader) work on that system? Is the system's date/time set correctly? Could there be a permissions restriction with C:\Windows\system32 or C:\Programs\National Instruments\Shared?
I'd also try doing an internet search for "installer error 2502" and see what other tips you might find. If all else fails, try running the installer from the command line like this:
setup.exe /log install_log.txt
That will generate a log file that might contain a hint for us.
Mert A.
National Instruments -
VS 2013 Build tools installation fails with error "Signature or catalog could not be verified"
VS 2013 ultimate - Build tools installation fails with error "Signature or catalog could not be verified" for MSBuild assemblies. Any idea what could be the problem?
Thanks
NMHello,
Do you mean you are trying to use this tool:
https://www.microsoft.com/en-us/download/details.aspx?id=40760
Can you navigate to your %temp% folder and filter by date to see the log of the Build tool?
I want to know which assemblies failed to be verified.
By the way, since MSBuild is embed in Visual Studio why you want to install this again? Do you have any error about this Build Tool when you install Visual Studio 2013 Ultimate?
“Signature or catalog could not be verified” is always related to corrupt source
, please double check you have a healthy network and then try the web installer again.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Resolved - CS6 Updates Fail with U44M1P7
CS6 Design & Web Premium - all product updates fail with U44M1P7 since Creative Cloud was introduced.
Two questions:
1. I saw earlier case which pointed to http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html. For my clarification, does this solution mean I have to Uninstall & Reinstall CS6 from scratch?
2. I did not mean to install, nor do I want Creative Cloud. So how do I get it off my computer and keep it off?
Thanks, George
UPDATE:
This was a Windows7 Ultimate 64-bit system
No Replies, but persistence prevails ...
Following resoplution steps worked for me, resulting in all products being Up To Date post reboot:
1. Start > Control Panel > Uninstall "Adobe Extension Manager CS6"
2. Reboot
3. Reinstall "Adobe Extension Eanager CS6"
a. I had original download files saved and used them.
b. But, download from http://www.adobe.com/exchange/em_download/em6_download.html produced same files
4. Reboot
5. Performed Validations:
a. Started Adobe Application Manager (which starts Creative Cloud)
1. Select "Install or update an application" and all products are noted as "Up to date".
b. Started Adobe Creative Cloud
1. Select "Install or update an application" and all products are noted as "Up to date".
c. Selected "Help > Updates" from within Dreamweaver, Fireworks & Photoshop (64-bit) CS6 (random choices)
1. All products are noted as "Up to date".
FYI, I noted that some other cases noted resolution with install of "Extension manager CC" (i.e. Createive Cloud)
I did not install this product.
Case closed for me. Hope this helps someone else.I will suggest to uninstall the Photoshop CC and completely clean Photoshop CC using Creative Cloud Cleaner tool.
you can download CC cleaner tool from : http://www.adobe.com/support/contact/cscleanertool.html
and cleaning reinsall phothshop CC using Creative cloud and then try to update the application.
Please let us know incase if you still face any issue -
Installation Failed with ERROR: Media DB Error : 12 Please help
Hello,
Adobe received my payment, I've downloaded Creative Cloud, click on Try button next to product, always on 43% installation failed with- 0 fatal error(s), 1 error(s)
ERROR: Media DB Error : 12
What does it mean? I used Cleaner Tool, it says some of the files could not me removed.
Please help me, I am desperate
MichaelaHello,
Adobe received my payment, I've downloaded Creative Cloud, click on Try button next to product, always on 43% installation failed with- 0 fatal error(s), 1 error(s)
ERROR: Media DB Error : 12
What does it mean? I used Cleaner Tool, it says some of the files could not me removed.
Please help me, I am desperate
Michaela -
Installation failed with error code 1603
Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
NaveedI have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done -
11.0.4 Updater installation failed - error U44M1P7
For the benefit of others, I wanted to post the steps that fixed this issue for gbrozk1:
Open Extension Manager CS5.
Select Dreamweaver on the left, and then remove the HTML5Pack (11.0.3 Updater) extension.
Repair the installation of Dreamweaver using your original installation media.
To do this, insert your original installation DVD, or double-click the downloaded DMG file, and then double-click Set-Up.app to begin the installation.
When given choices of which products to Install/Re-install, uncheck everything except Dreamweaver. (That is, we need to be sure Dreamweaver is selected to be re-installed. Re-installing repairs the installation.)
Follow the remaining on-screen instructions to complete the re-install/repair of Dreamweaver.
Restart your computer.
Install the 11.0.4 update.
Hope that helps someone!I have had the same problems as you @davert2
Dreamweaver CS5 11.0.4 Updater
Installation failed. Error Code: U44M1P7
I have done the following to try and rectitfy the error:
1. I tried Carey Burgesses help here - http://forums.adobe.com/thread/848587?start=0&tstart=0
2. Installing the update manually from here - http://www.adobe.com/support/dreamweaver/downloads_updaters.html
3. As suggested - removing the /AAMUpdater folder here - http://forums.adobe.com/thread/847350?start=0&tstart=0
4. Tried the "fix" link - http://kb2.adobe.com/cps/902/cpsid_90241.html - dead link
I am not going to reinstall CS5 because I can't get a fix, I'm not all together sold that THAT would fix the error either...
Anyone have an actual solution for this?
That was the post from me in November...
As of today, I've had the Adobe Application Updater run 3 times this morning, all with the same result.
I am on a Mac, 10.7.2 and am running CS5 - Dreamweaver runs fine there are no issues there, I have now 3 Adobe Application Manager updates in my tool bar... As soon as it runs again, I'll have 4...
Anyone have any answers that DON'T involve reinstalling Dreamweaver? -
All installations fail with Exit Code: 7 error
Hi, can you help please?
I am trying to download and install the CC 2014 through the Creative Cloud app but they keep failing with the Exit Code: 7 error mentioned above. The installation gets to 42% and then I get the error. Rebooted several times and re-tried. It happened first after trying to update Bridge CC, asked me to quit programs and Retry and now have this issue and cannot move forward. Used the Adobe Cleaner to remove CC Desktop app and re-installed OK, but problem persists.
I can carry on working in my current apps but really would like to start with the CC 2014 a soon as possible
Thanks
SimonPlease Refer : http://forums.adobe.com/message/5391508
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
For Exit Code 7 : http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Hope it helps you.
Regards
Rajshree -
Installation failed with Windows Vista and JDK1.602
Hi All,
Appreciate any help to resolve the following installation error on my Windows Vista system with JDK1.602
Pop-up Error Message:
The installer is unable to run graphical mode. Please check the value of the DISPLAY environment varibale.
Thanks,
CPJSE8.1 (based on NetBeans 5.0) is not supported on Vista. You may want to consider using the latest NetBeans 5.5.1. (NetBeans is where all future development is planned for).
http://forum.java.sun.com/thread.jspa?threadID=5192837
From the release notes of NB551:
# Issue #85361: NetBeans 5.5 installer does not start on Windows Vista.
Description: On systems running Windows Vista, the NetBeans 5.5 installer fails to start
and a message suggesting running with the "silent" or "console" flag appears.
Workaround: To correct this, run the installer on JDK 6.0 build 96 or newer.
If you encounter further difficulties, disable Compatibility Mode manually. You can do
this by right-clicking the .exe installer file and choosing Properties from the pop-up menu,
then deselecting Compatibility Mode in the Compatibility tab of the File Properties dialog.
Note that if Compatibility Mode was turned on automatically, it is necessary to disable it
for both the current user AND all users. To do so, click the "Show Settings for All Users"
button, then deselect the Compatibility Mode checkbox in the "Compatibility for All Users"
dialog.You can try the same workaround for installing jse8.1, to see if that works. But, it is an older version that is not supported on vista and hence my suggestion to consider a later version of NB. -
VMWARE Server2012RT Installation failed with option: I will install the Operating System later
Hello, first sorry for my englich but I hope it wille ok for this Issue.
I have instelled the Win2012RT Server in VMware but the Installtion failed with this error:
Ok i chose the option: "I will install the Operating System later.",
and also tried
this:
http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
However, I always get
this displayed:
Last Log entry is this one:
2014-05-07T09:42:03.962+02:00| vmplayer| I120: VMMgr: Finished opening VM at /vm/#cf2324dcf779001d/ from G:\VMs\Server2012RTVmware.vmx
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: main UI rect: 687x619 @ 948,249
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Found 0 present screens
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: Windows for extra guest monitors will not be shown
2014-05-07T09:42:03.962+02:00| vmplayer| I120: cui::MKSScreenWindowCoordinator::HandleGuestTopologyChange: setting main view to all displays
2014-05-07T09:42:03.978+02:00| vmplayer| I120: SnapshotTree: Emitting refresh (G:\VMs\Server2012RTVmware.vmx)
2014-05-07T09:42:04.009+02:00| vmplayer| I120: VMHSVMCbPower: G:\VMs\Server2012RTVmware.vmx, Setting state of VM to powerOn with option soft
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Stats VMX "G:\Programme2tePlatte\vmware-vmx-stats.exe" not found. Using standard VMX "G:\Programme2tePlatte\x64\vmware-vmx.exe"
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: Starting vmx as G:\Programme2tePlatte\x64\vmware-vmx.exe
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VigorClient_StartAndConnect Failed: Message
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Pending power op found, completing.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Clearing execReqPath
2014-05-07T09:42:04.024+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.024+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: VMHSStartVmxVigorCb: vmPath=/vm/#cf2324dcf779001d/ status=error
2014-05-07T09:42:04.040+02:00| vmplayer| I120: G:\VMs\Server2012RTVmware.vmx: Reloading config state.
2014-05-07T09:42:04.040+02:00| vmplayer| I120: VMHS: Transitioned vmx/execState/val to poweredOff
2014-05-07T09:42:04.040+02:00| vmplayer| I120: Setting power state poweredOff
2014-05-07T09:42:04.056+02:00| vmplayer| I120: Internal VMDB error: VMDB failure (-1)
2014-05-07T09:42:04.056+02:00| vmplayer| I120: VMMgr::CloseVM: closing VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.056+02:00| vmplayer| I120: DlgUI: Error while powering on: Internal error.
2014-05-07T09:42:04.087+02:00| vmplayer| I120: VMMgr::OnVMDestroyed: cleaning up after destroyed VM at /vm/#cf2324dcf779001d/
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::SetAttached: detach
2014-05-07T09:42:04.087+02:00| vmplayer| I120: cui::MKS::OnSetAttachedCompleted
2014-05-07T09:42:04.118+02:00| vmplayer| I120: FILE: FileDeletionRetry: Non-retriable error encountered (C:\Users\Michael\AppData\Roaming\VMware\preferences.ini~): Unknown error 2 (0x2) (2)
2014-05-07T09:42:07.488+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:42:09.874+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
2014-05-07T09:44:13.286+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=1
2014-05-07T09:44:13.473+02:00| vmplayer| I120: Cmd /host2/#_client/util/file/cmd/##135/op/stat/ failed: Invalid path
2014-05-07T09:44:17.061+02:00| vmplayer| I120: PlayerFrame::UpdateActivePlayer: mActive=0
Does anyone have
an idea maybe??
Vmware Version is: 6.0.2 build-1744117
Host: Windows 7 Enterprise, 64-bit 6.1.7601, Service Pack 1
WIN2012RT Iso is: 9600.17050.WINBLUE_REFRESH.140317-1640_X64FRE_SERVER_EVAL_DE-DE-IR3_SSS_X64FREE_DE-DE_DV9.ISO DOWNLOAD: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspxOk. I could finde out the Problem.
I uninstalled VMware witht RevoUninstaller and deleted all Vmware sysfolders and all regKeys.
Important note:
The first Installtion was on the 2nd Hard disk on my PC. These Harddisk was Connected via USB3 Port. VMware was successfully installed, and via the standart installation procedure the ISO files could be installed in Vmware, but the problem persist with
WIN2012RT server.
After a new installation of VMware into the Local C: Drive. The Win2012RT.Iso could be installed. With this procedure
without Issues: http://www.techieshelp.com/server-2012-windows-cannot-read-the-setting-from-the-unattend-answer-file/
ISO Download: http://technet.microsoft.com/de-de/evalcenter/dn205286.aspx -
Oracle 8.1.6 Installation fails with java.lang.NullpointerException
HI,
We are installing Oracle 8.1.6 on a D Class machine running HPUX 11.0 OS
While i start the Universal Installer, it fails with the following
error.
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-dt-interface
system-medium-r-normal-s*-*-*-*-*-*-*-*-*" to type FontSet
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-dt-interface
user-medium-r-normal-s*-*-*-*-*-*-*-*-*" to type FontSet
Exception java.lang.NullPointerException occurred..
java.lang.NullPointerException
at sun.awt.motif.MComponentPeer.setFont(MComponentPeer.java:197)
at sun.awt.motif.MFramePeer.<init>(MFramePeer.java:73)
at sun.awt.motif.MToolkit.createFrame(MToolkit.java:177)
at java.awt.Frame.addNotify(Frame.java:203)
at java.awt.Window.show(Window.java:143)
at java.awt.Component.show(Component.java:511)
at java.awt.Component.setVisible(Component.java:473)
at
oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:419)
My ORACLE_TERM is set to dtterm.
Can anybody give some suggestions what would be the problem..?
Thanks
vinod
nullPretty much the same thing, Tomcat is the web server in CUCM, so that should have been sufficient.
Please rate all useful posts!
Chris
Maybe you are looking for
-
Loading Modules and Mounting Local Filesystems failed during boot
Hi all, since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process). [gianluca@gianluca-laptop ~]$ dmesg
-
Does Adobe Photoshop Elements work with MacBook Pro with Retina display?
Does Adobe Photoshop Elements work with MacBook Pro with Retina display, please? Have searched Adobe website for answer - most recent is 2013 answer, saying no. Contradicted by a staff ember who only referred to Photoshop, not Elements. Reason I need
-
Exporting fce4 avchd edited movie to dvd-r for ps3 play back
Hello, Im trying to figure out how to take an AVCHD edited movie from fce4 and burn it to dvd-r so i can play it back on ps3 at full hd resolution. Thanks for any help!
-
Why the Report page language can not be in Chinese
Dear experts, My customers language is Chinese, but when I log on SRM 7.03, it shows Chinese except the report page. it is like this: while if I change to German, the report page can show German. I searched the discussions before and can not find the
-
Hi All, I want to calculate Period Dimension members Jan to Dec only. I have some more period dimension members at level 0. If I use @LEVMBRS("Period",0), it will caluculate all the level 0 members in the period dimension. But I want to calculate onl