My intalled add-on doesn't work after i updated it.

after updateting new version of "flash video resource downloader ver 1.0.3." add-on.. the add-on icon on the right below doesn't show up.
and when i go back to the old version of that add-on, the message says firefox 3.6 version doesn't support the add-on.....
what i should do for this trouble...? please help..
thanks you....

I have found a solution to this problem!
You can watch this youtube video for instructions: https://www.youtube.com/watch?v=OWnYeAniGUo
If you want to view the original discussion, the link is here: https://discussions.apple.com/thread/5501655?tstart=0

Similar Messages

  • My SuperDrive doesn't work after Lion update

    My Superdrive doesn't work after Lion update, i have tried a few solutions that i found in forums, but nothing seems to work, please help me shed some light on my problem.
    Thanks

    I too have had the problem since updating to Lion.  My superdrive isn't even recognized.  I have repaid hard disk permissions and also reset PRAM.  Sure wish I had a fix. 

  • Fit the window with mouse doesn't work after new update 10.9.2

    Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

    Doesn't anyone having this issue?

  • EPSON CX5600 PRINTER DOESN'T WORK AFTER MOUNTAIN UPDATE

    Hello Dear,
    I've using my Epson Stylus CX5600 for a  long time with OSX 10.7 Lion on my Mac.
    The printer is connected in another computer (Windows 7) and I can print fine from my macbook air
    After my system update for OSX Mountain Lion yesterday, my printer works fine only on Windows computer
    on my macbook doesn't works anymore
    I've re-installed a lot but when I try to print the sheets appears in blank
    The driver-version available in Mountain Lion is 1.5
    I guess this is the problem and need a urgent correction driver update
    I'm looking forward to the internet and Epsons websites but didn't find nothing,
    in Epson website doesn't
    Can you help me please?
    Thankyou

    Hi my friend,
    I've tryed Bonjour, but only works Windows to install a print for Mac.
    I need the opposite... print from Mac to Windows.
    Yes, I've a lot of problems to install a printer on Lion, but after 3 days I got success
    I can't remember but I did this:
    1. In iMac System Preferences->Print&Fax->"+"
    2. In "Add Printer" click and Tool Bar->Customize Toolbar...
    3. Add "Advanced" to Tool Bar and click "Done"
    4. Click Advanced->Type->LPD/LPR Host or Printer
    5. URL: lpd//user:[email protected]/EPSON%20Stylus%20CX5600&20Services
    6. Printer Using->Select Printer Software... (EPSON Stylus CX5600 Services)
    I did this and on Lion works fine. But now on Mountain Lion I can install, but I've received the error message
    Do you have any idea?
    Thank's again

  • Flash doesn't work after I updated it

    I am using Firefox 34.0.5 and updated my flash player but after the update it stopped working. The videos doesn't show up. I tried disabling all add-ons and found out that Shockwave Flash 16.0 is causing the problem. What should I do to make it work again?
    I don't know why but some videos work just fine and other videos doesn't show anything even a white or black screen, even though they're from the same site. When a video doesn't show up, the cursor changes from the normal cursor to "working in background" cursor rapidly.

    ''Talha [[#answer-672921|said]]''
    <blockquote>
    Hey,
    Did you try these typical Flash fixes?
    (1) Disable hardware graphics acceleration in Firefox and in Flash
    (A) In Firefox, un-check the box here and restart:
    orange Firefox button or classic Tools menu > Options > Advanced > General > "Use hardware acceleration when available"
    (B) In Flash, see this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
    (2) Disable protected mode (Win Vista & Win 7 & maybe Win 8)
    See this support article from Adobe under the heading "Last Resort": Adobe Forums: https://forums.adobe.com/message/4468493#TemporaryWorkaround
    Hope it helps.
    </blockquote>
    I did both of these but it still didn't work. I tried using another browser and found out that the problem only occurs in firefox.

  • My add-ons aren't working after I updated Firefox

    I updated FF a week ago and my add-ons haven't worked since. They aren't in the browser, but they are in the list on the add-ons in the tool bar. When I try to click on 'Options' on one of the add-ons, it just freezes and doesn't do anything. I end up having to use the Task Manager to close FF. I also clicked the 'Find Updates' button on the Add-On thing, but there weren't any updates.
    The only thing I noticed that are missing are my add-ons on the browser. Not my history, bookmarks, or anything else.
    The most noticeable changes are my Session Manager and AdBlockPlus. I can't get to my previously saved session and that's a big bother. Watching ads on YouTube isn't very fun either.
    I tried to do what's here https://support.mozilla.com/en-US/kb/Unable%20to%20install%20add-ons#w_corrupt-extension-files and delete extensions.ini, extensions.cache, and extensions.rdf
    but there isn't the file extensions.ini for some reason..
    None of the add-ons are disabled, and I tried to disable all of them and try them one by one, but it didn't work at all. I disabled all of them, then tried AdBlock Plus and it didn't work, so I don't think one of my other add-ons are causing the problem.

    In order to uninstall a possibly unwanted extension, please do the following:
    #From the Firefox window click the Firefox button at the top left and select ''Add-ons'', or, if the Firefox button is not shown, click the ''Tools'' menu and click ''Add-ons''.
    #Once the Add-on Manager has opened in a new tab, click the ''Extensions'' button on the left side of the window.
    #You should now see a list of your installed extensions on the right side together with buttons on the right side of each extension.
    #To remove an extension from Firefox, simply click the ''Remove'' button. You should see a message that informs you about the successful removal of the add-on.
    #Note that some add-ons require a Firefox restart to be removed completely. To perform a Firefox restart after the add-on removal, click the ''Restart now'' link in the message.
    You can find further information about uninstalling extensions in the following articles:
    [[Disable or remove Add-ons]]
    [[Remove a toolbar that has taken over your Firefox search or home page]]

  • HTML animation effects doesn't work after last update

    After last update my html animation that have different effects with different time: fade, translate, rotation, scale, ecc... plays but some effects doesn't play.
    Various animated png in html project appears immediatly without shows transitions or deformations.
    I have made html animation with Motion Composer that have time curve for each effect.. and all work fine with previous dps desktop tools...
    I don't use Hedge because folios with hedge animation is mooooooooore large than folios with motion composer animation.
    A single complex animation (10 .png(1024x768) with multipe effects fo each) made with composer produce a 1MB folio...
    The same animation made with Hedge produce more the 100MB folio.
    why new version of dps don't show my html anim correctly ? I hope adobe correct this proble. 

    We just released an update to the DPS tools that addresses the issues around HTML/iFrame and buttons in release 25. You can download the updated components by following the links at http://www.adobe.com/go/learn_dps_install_en.
    Neil

  • RM 900 remote doesn't work after driver update

    Hi!
    After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
    I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
    Any clue how to make it work again?
    Using Windows XP SP3 and Audigy Platinum Ex.
    Thank you again in advance.
    PD: Excuse my poor english, it's not my nati've language.

    Hello Jashue67,
    Sorry to hear about all the trouble with the Apple TV.  It sounds like you have done a restore but need to pair your Apple TV remote at this point.  You can follow these steps to pair the remote:
    Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
    You can find the full article here:
    Apple TV: Pairing and unpairing the Apple Remote
    http://support.apple.com/kb/ht1555
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • N73: restore doesn't work after firmware update

    Hello!
    I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
    Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
    After the update I tried to restore the backup via the same app.
    Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
    Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
    Is there another solution that doesn't involve buying this 3rd party software?
    TIA

    The phone is working well...
    I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before.

  • Internal camera doesn't work after Firmware Update

    Hi everybody,
    I had some troubles after updating the Firmware to version 1.1 on my MacBook (the black model). Since the update my camera (the one mounted on top of the screen) doesn't work any longer (it keeps capturing a plain green picture) and the led near the camera is always lighted. Is there anyone who had the same problem? Any idea to solve it?
    thanks
    MacBook   Mac OS X (10.4.8)  

    Hi,
    problem solved restarting with OptAlt+PR

  • Ipod doesn't work after firmware update

    I have an old ipod and I tried to update the firmware. After the update It did'n work. ON the Ipod screen it appear like a plug indicating to charge it, but I charged it several times and the result is the same.
    Now i'm trying to recover it again but my computer doesn't recognize it.
    ¿Is there anything I can do?
    Thanks in advance.
    Jse

    The best place to look for help first is Genuine Apple help directly from Apple.
    Read the iPod Touch Users Guide.
    http://support.apple.com/manuals/#ipodtouch
    Also start with the basics from Apple.
    1. *Restart iPod touch:* Press and hold the On/Off Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPod touch. To turn iPod touch back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
    If you can’t turn off iPod touch or if the problem continues, you may need to reset iPod touch. A reset should be done only if turning iPod touch off and on doesn’t resolve the problem.
    2. *Reset iPod touch:* Press and hold both the On/Off Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
    For more troubleshooting suggestions, see Appendix B, “Support and Other Information,” on page 214.
    And More..........

  • HP Laserjet m1214nfh MFP Doesn't work after firmware updating

    Hello
    HP Laserjet m1214nfh MFP (USB Connetcion).
    I downloaded the latest firmware (ver: 20130211 4 Mars 2013) and updated it.Now it doesn't work and on its LCD it prompts "Initializing"  and after some seconds LCD turns off and again prompts "Initializing".
    Please guide me.
    thank you

    Hi,
    Please try plugging the printer to a direct power source without any power hub or surge protector usage and check if that may help.
    If the same persists please contact HP support by following Technical support after you buy for your region below:
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Internet Connection doesn't work after windows update.

    Hi everyone,
    my boyfriend recently updated his laptop.
    After the update his computer wouldn't work anymore. I went on the web and read some topics on the forums. And even tried some of them already.
    I don't have Norton or Mcfee security software. 
    Operating system is Windows 7 and it's a 64-bitssystem.
    I tried disabling ipv6 but that doesn't help. When i open the cmd and type ipconfig/all i get an overview of several adapters.
    DHCP is enabled for everything but Tunnel-adapter for LAN-connection * 3: (sorry translating from dutch).
    Also IP-routering and WINS-proxy are disabled.
    Also i checked the recent updates. But for some reason the failing ones aren't amongst them.
    Can someone pls help? Im wellknown with OS and can try to work with anything u name.
    Thanks in Advance!
    Nilu

    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.

  • C7 sync doesn't work after Anna update

    I normally sync the agenda between outlook 2003 and C7 with Ovi-suite.
    After update to symbian Anna it doesn't work.
    Strange is that Ovi suite gives the number of events that did not sync.
    So he can recognize them, but can't sync.
    Any solutions?
    Thanks!
    Pietth

    I have the same problem in C6-01 after Anna Update, there are another two posts around here with other people with the same issue, an, believe it or not, no answer from Nokia
    My problem also affects Ovi Maps favourites. I just could update them once since Anna Update, and now that is failed too

  • Macbook pro doesn't work after EFI update.

    My new macbook pro doesn't work. I bought it yesterday and after I've installed EFI update (it installed without any errors) my mac
    "starts" with blank screen, no chime sound, with fans on (I guess - it's full speed). I've already tried those tricks with command+option+p+r and it neither work nor bring my mac to "life". Any ideas what this issue could be?

    I've got the same problem but with QT player (not PRO version)
    I've installed the 7.1.2 update for quicktime and the audio and videos files on the net doesn't start I've got a "?" then I go to the quicktime prefs and I see that the entire QT plugins disapear
    Besides the audio files and the video files on my HD work
    so ,is someone can help me for finding the whole QT plugins ?
    If it was impossible ,I suggest you to make a 7.0.4 reinstaller for 7.1.2 for Quicktime

Maybe you are looking for

  • How to create a game. Basic steps.

    So, just browsing through these forums, I see many posts by prospective game designers wanting to get started. But many of these questions are so ill-researched or off basis that most people don't even know how to respond. So here's a quickie guide o

  • Why is the font on my email very small?

    Since installing os x maverick, my incoming email has extremely small fontl. It is small when I print it out. This message has very small font. I manually enlarged it. It seems the default now is 10pt or smaller.

  • DCs being removed from 'Used WebDynpro Components' list

    Hi, I am having a problem while creating a project from an already activated DC. The DC uses 6 other DCs and was built properly, activated and deployed from a client machine. Now I need to have this DC in my machine (also a client). So I made sure th

  • Missing fonts Photoshop CS3 in Win 7

    Photoshop worked fine in XP Pro SP 3. I reformatted the HD and installed Win 7. I installed some postscript fonts and they don't show up in Photoshop but show up fine in Framemaker and MS Office products. Any suggestions.

  • Pesonnel settings of Purchanse Requistion

    Hi, Can any one tell me the table name where personnel settings of Purchase requisition is stored. If you goto Me21n there us a button for personnel setting, i would like to know the table name where these are stored. Regards Ria